Used Baoma Db 703 for sale (2,099)

Condition: used, Technical details: revolution per minute: Motor: 1475 U/min Nwedpfx Amou Nvz Ionsg voltage: 400 V / Hz total power requirement: 4,6 kW AXIAL fan inside Ø 600mm Flow rate 3,30 m³/s Pressure 600 Pa Siemens motor protection IP54 External control *

Condition: used, Year of construction: 1960, Technical details: Njdox Afn Nspfx Amnowg workpiece height max.: 600 mm Arm length: ca. 700 mm bore capacity in steel (diameter): 25 mm Table dimensions: 1100 x 400 mm

Condition: ready for operation (used), Heidenhain UM 113D Inverter ID: 518 703-01 SN: 25094821B – supplied with test protocol, professionally fully overhauled and tested, with 3 months warranty, 100% functional, scope of delivery as per photos. Note: In the exchange procedure, your defective return part must not have any mechanical damage such as fractures, as these are no longer repairable. In such cases, a subsequent invoice of €600 incl. VAT will be issued. Attention: You are bidding on a Heidenhain UM 113D Inverter ID 518 703-01 SN 25094821B as an exchange unit (exchange service), professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as shown. For both repair and exchange procedures, your returned defective item must be free of mechanical damages such as breakage, as these cannot be repaired. Otherwise, an additional €600 incl. VAT will be charged. Nwedpfxjy Nrazo Amnog

Condition: ready for operation (used), Heidenhain ID: 203 263 Length Measurement System LS 701 - ML 320 mm SN: 176517F with LS 703 reading head, used, in good condition, 100% functional, delivery as per photos. Nwsdpfx Amsy Nqfvsnjg

Condition: new, Heidenhain LC 481 7 20 µm linear scale ML 370 mm ID: 353 703-03 SN: 21260704H + AE LC 481 / 20 µm read head Id. 384 978-01 SN:20428302G, unused in opened original packaging, 100% functional, delivery scope as shown in photos. Nwjdpfjy Nqg Hox Amneg

Condition: ready for operation (used), Heidenhain UM 113D converter ID: 518 703-01 SN: 25094821B – with test protocol, professionally fully overhauled and tested, 3-month warranty, 100% functional, scope of delivery as shown in the photos. Njdjy Nrauspfx Amnowg

Condition: used, Year of construction: 2012, Delivery Nwedpfx Amjx Ndzdensg Palamides Delta 703 Year: 2012 - Vertical stack delivery with pressing - Banding device(s): 3

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. Nwjdexnlflopfx Amneg - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Year of construction: 2023, condition: used, Manufacturer: Giovanni Cucchi Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine diameter range: 20-70mm bar length: max. 1500 mm The advantages of DB-EVO barfeeders at a glance: - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) Nsdpfxjy Ndg He Amnewg - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contact us for getting more information and pictures on mail(at) or *

Condition: like new (used), This used SCHEER DB 4 universal dowel boring machine has been functionally tested, worn parts have been replaced and the machine geometry has been readjusted to ensure maximum precision. The SCHEER DB 4 universal dowel hole drilling machine is specially designed for drilling construction holes, for drilling holes in rows in a 32 mm grid system and for drilling a wide variety of fittings; it enables all these tasks to be carried out quickly, precisely and without long set-up times. Extremely simple operation via symbols and 4 program preselection controls for changing over to the new work process in seconds. Central adjustment of the removable side stops, therefore always flush at the front edge, precise drilling of left and right workpieces. It does not matter whether the parts are cut to size or at the correct angle. The doweled corner joint is always flush, both on the edge and on the surface! No CNC machine can achieve this as easily and quickly as a SCHEER DB 4. Safety clamping device across the entire table width, clamping of the workpieces directly on the drilling beam. Stop rail with three adjustable folding stops. Continuous table supports make it easier to push through and drill long workpieces, fold-up workpiece support tables facilitate line drilling and hardware drilling. 2 drilling units Drill motor type BM 602-230/400 Volt, 50 Hz, n= 2860, 2.2 kW output Nwjdpfx Ameu Rqi Aensg 25-spindle attachment gearbox Spindle pitch 32 mm (other spindle pitches on request) For surface and face drilling. The vertical drilling unit is equipped with an oil brake for tear-free drilling through rows of holes. The control cabinet of the machine has been completely rebuilt and converted to the new SIEMENS LOGO CONTROL. This ensures the operational safety of the machine for the future! Gantry passage: max. 950 mm Working length: max. 2360 mm

Condition: used, boring spindle 21 dividing 32 mm hollow max. 1.000 mm Nwedjwp E Uxepfx Amnsg swivable pneumatisch °

Condition: good (used), Year of construction: 1996, Tube diameter: 4-28 mm Wall thickness: / mm Minimum bending radius: 1.5 x D - 2.0 x D mm Control: Siemens LOGO Delivery rate: 4.5 l/min Max. bending angle +/-: 190° Nominal pressure: 250 bar Operating pressure: 3095 bar Nwedsy Uwrtjpfx Amnsg Delivery rate: 4.5 l/min Total power requirement: 1.5 kW Drive: Hydraulic cylinder and roller chain

Condition: good (used), Year of construction: 2005, control type: CNC control, Tube diameter: 30 mm Wall thickness: 2 mm Max. bending angle: +/- 180 + 10 ° Tube insertion length: 4100 mm - Round steel tube up to 30 x 2.2 mm² - Round stainless steel tube up to 30 x 1.5 mm - Square tubes 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec. (feed) Nodpfx Ajy Ukzusmnewg - Longitudinal feed speed: 450 mm/sec. - Maximum bending radius: 125 mm - Freestanding bending head, 850 mm long - Bending axis drive: electrohydraulic

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). Nodpfx Ameywtxbjnjwg The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: used, functionality: fully functional, mileage: 453,870 km, power: 206 kW (280.08 HP), first registration: 11/2008, fuel type: diesel, empty load weight: 11,590 kg, maximum load weight: 7,410 kg, overall weight: 19,000 kg, tire size: 315/70 R22.5, axle configuration: 4x2, wheelbase: 3,900 mm, next inspection (TÜV): 11/2026, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, suspension: air, loading space volume: 13.3 m³, Year of construction: 2008, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, compressor, differential lock, fog lights, hydraulics, immobilizer system, low noise, parking heater, truck registration, Model: SCANIA P280 DB 4X2 MLB JOAB Anaconda MD 13.3 cbm Air/Air Body: JOAB Anaconda MD Volume: 13.3 cubic meters Year of Manufacture: 11/2007 First Registration: 27.11.2008 Mileage: 453,870 km (original) Nedey Rzx Ajpfx Amnewg Engine Power: 206 kW Hydraulic System (PTO) Auxiliary Heater Antennas Radio/Cassette/CD/MP3 Air Conditioning 2x Air-suspended seats with seat heating, fully adjustable Electric windows Electrically adjustable exterior mirrors Multifunction steering wheel Speed limiter Sun visor Work lights Fog lights High beam Warning beacon Tool/storage box Aluminum fuel tank Emission Class: EURO 5 Retarder/Intarder/Engine brake Overall Vehicle Dimensions (L x H x W): 805 cm x 318 cm x 255 cm Unladen weight: 11,590 kg Payload: 7,410 kg Gross permissible weight: 19,000 kg Differential lock Wheel configuration: 4x2 Wheelbase axle 1-2: 3,900 mm Tire size front axle: 315/70 R22.5 Tire size rear axle: 315/70 R22.5 Air suspension front/rear? Wheel covers Our vehicles are generally listed with valid inspection (TÜV) and emissions certificate (AU). These are usually foreign test certificates, which are sufficient for obtaining export license plates. For a valid TÜV and AU examination according to German standards, please contact us individually if required. We speak German and English, but feel free to send us a message in your language! Trade-in possible! Price is net! We can deliver your vehicle directly to the ports of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany, or Antwerp/Belgium and Amsterdam. We can ship the vehicle worldwide! Export license plates available on request! We support you with export procedures, original data confirmation for country homologation, supplier declaration, preparation of export documents, and customs plate provision if required. Vehicle inspection and test drive possible anytime, including weekends, by prior telephone arrangement! Disclaimer: The buyer is obliged to inform himself independently of the condition, dimensions, and features of the goods/vehicles. All information is provided without guarantee. Subject to change, prior sale, and errors.

Condition: used, Year of construction: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping-drilling-unclamping, electric jog operation, - Automatic return of the drilling unit after reaching the preset drilling depth - Automatic extension of drilling depth when end-grain drilling saves the need to adjust drilling depth from flat to end-grain drilling. (+10 mm, e.g. with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end-grain 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drill feed 0-70 mm) incl. 21 quick-change chucks (Ganner system) for easy bit changes. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping beam, movable in Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop fence 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily swappable from right to left for mirror-image shelf drilling in carcass constructions, also suitable for line boring in System 32. - Side stops and position settings, as well as drilling height position via support table using mechanical digital counters. - Side stops can be easily swiveled away, for the quickest changeover from carcass to frame and line boring. - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm. - Ideal three-stage... Weight: approx. 400 kg gross, approx. 350 kg net. Dimensions (L x W x H): 1.35 m x 1.25 m x 1.40 m Equipment: 1 extraction hood, dust tested, ø 120 mm. 1 set for line boring in System 32 complete with: 1 base fence 1050 mm (aluminum profile 40x40 mm), 1 setting gauge for line boring. 1 frame dowel device complete with: 1 center stop, 1 round stop rod 850 mm long, 2 stops. Location: Nattheim. Nodpfx Amsyyxkhenewg

Condition: excellent (used), Year of construction: 1988, Scheer dowel drilling machine DB 12 used 3 spindles 32 mm drilling center distance Motor 1.1 kW Max. drilling depth 70 mm Njdey Ahuhepfx Amnjwg Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), axle configuration: 2 axles, first registration: 03/2009, loading space length: 7,300 mm, loading space width: 2,440 mm, loading space height: 2,470 mm, suspension: air, color: other, Year of construction: 2009, WSK000001249238 = More information = General information Mileage: 735.625 km Registration number: 81-WD-NR Axle configuration Brakes: disc brakes Suspension: air suspension Front axle: Steering; Tyre profile left: 45%; Tyre profile right: 45% Rear axle: Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 2.820 kg Carrying capacity: 15.180 kg GVW: 18.000 kg Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Njdpfx Amjymrvvenewg Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 1989, Elektra Beckum Bandsaw BAS 450 DB Year of manufacture: 1989 Cutting height: 300 mm Blade length: 3,380 mm Motor power: 1.5 kW Weight: approx. 120 kg Location: ex stock 54634 Bitburg Nedpfx Amsyy U Txonswg - immediately available - Subject to prior sale

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 1936, Order- No.: 153-03 Equipment / Additional information: No. of ups: 3 Max. sheet size, width x length (cm) Nwodoxixb Ajpfx Amnjg 1 up / 76 x 30,5 2 ups / 33.5 x 30,5 3 ups / 23.5 x 30,5 Min. sheet size, width x length (cm): 11 x 9.5 with small format equipment: 9 x 6.5 Max. pile height (mm): 150 Min. pile height (mm): 20 Max. speed (m/min): 200 Max. output (piles /h): 1,800 Banderol width (mm): 5 Pressing force (N): 35,000 Infeed height (cm): 40–105

Condition: good (used), Year of construction: 2000, machine/vehicle number: 805311, Offer 23281 Nwedpfx Amey Ia Nzenog Technical Data: - Pressing force: 2 t - Riveting time adjustment - Throat depth: 120 mm - Table size: 210 x 200 mm - Installation height: 120 mm - Stroke: 120 mm - Pneumatic connection: 6 bar - Control: SIEMENS - Drive: 400 V / 0.55 kW - Space requirements: approx. W 500 x H 1650 x D 650 mm - Weight: approx. 250 kg

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Nedsv Hm Nmopfx Amnswg Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: good (used), Year of construction: 1980, Dowel drilling machine for frame production Nwedpeyy I Snsfx Amneg

Condition: used, axle configuration: 3 axles, first registration: 02/2018, color: other, Year of construction: 2018, Empty weight: 6.470 kg Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right 10 mm Nwedpfx Aoym Aw Djmnjg

Condition: used, Year of construction: 2008, functionality: fully functional, PALAMIDES DELTA 703 STACKER OUTPUT WITH CALENDER Nsdpfsy R Sdcox Amnjwg Output stacker with automatic calender including counting, integrated banding and sealing system, press station up to 3.5 tons, automatic format recognition, antistatic device.