Used Agilent Technologies Agilent Technologies 2200 Tapestation for sale (27,388)

Condition: new, overall weight: 200 kg, operation weight: 1,900 kg, Year of construction: 2026, New hydraulic hammer for excavators from 20 tons upwards, Nwsdszghb Tepfx Akijn filling kit.

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: U_H_1341, input voltage: 400 V, warranty duration: 6 months, total width: 1,150 mm, total length: 1,350 mm, total height: 1,900 mm, type of input current: DC, overall weight: 500 kg, year of last overhaul: 2026, Fully automatic dough dividing and rounding machine. Designed for dough with a tolerance range (TA) of 148-160. Key features of the machine: - Output: up to 10,000 pieces/hour, - Weight range: 28 - 85 grams, - Number of rows: 5, - Hydraulic system for the main piston, - Condition: like new (after general overhaul), - Hopper capacity: 50 liters, Nsdpjz N A N Njfx Akiown - Produces round products, - Made of stainless steel.

Condition: used, Keysight Mixed Signal Oscilloscope / Digital Storage Oscilloscope Keysight / Agilent InfiniiVision MSO-X 3034A 350 MHz Mixed Signal Oscilloscope with 4 analog channels, 16 digital channels, and 4 GSa/s sampling rate For sale is a used Mixed Signal Oscilloscope from the manufacturer Keysight Technologies / Agilent Technologies. The device is suitable for precise signal and measurement tasks in development, laboratories, service, training, research, as well as industrial electronics and quality assurance. Technical data Manufacturer: Keysight Technologies / Agilent Technologies Type: MSO-X 3034A Series: InfiniiVision Device type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz Analog channels: 4 Digital channels: 16 Max. sampling rate: 4 GSa/s Display: Color display MegaZoom technology Inputs: 4x analog BNC inputs Digital input / Logic connector USB port USB Device / USB Host Trigger Out Ext. Trigger / Calibration connector Power connection: 100 - 240 V AC 50 / 60 Hz Power consumption: max. 100 W Dimensions: approx. 381 × 204 × 142 mm Weight: approx. 4 kg Features Large color display Front-panel control buttons 4 analog channels 16 digital channels USB interfaces Trigger functions Analysis functions Measurement functions Storage and printing functions Carrying handle Accessories as shown in the pictures Application areas Electronics development Laboratory Nwjdpfx Aezh I Dwskijn Service Troubleshooting Signal testing Printed circuit board testing Training Research and development Quality assurance Industrial electronics Scope of delivery Keysight / Agilent InfiniiVision MSO-X 3034A 3x probes as shown in the pictures Power cable Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Device can be switched on Display and operation appear to be functioning properly Test seals / stickers as shown in the pictures are present Weight: approx. 4 kg The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Year of construction: 2023, operating hours: 2,470 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1257.01, Wood scanner Luxscan EasyScan Smart NEW OptiCore AI Software Laser cameras 4 Colour cameras 4 3D & scatter lasers 4 Dot lasers (softwood) 4 Automatic camera positioning fix widths LED lighting devices 4 Ingoing lengths min./max. 1800 - 6000 mm Ingoing widths min./max. 40 - 155 mm Ingoing thicknesses min./max. 15 - 60 mm Ingoing widths min./max. (W210) 35 - 210 mm Width tolerance (per board – per bundle) +/- 3 mm Thickness tolerance +/- 3 mm Max horizontal field of view for top/bottom cameras -10 / +40 mm Max vertical field of view for left/right cameras -5 / +15 mm Maximum productivity: Nsdpfjyrpaisx Akiswn 30 boards of 2000 mm per minute 17 boards of 3600 mm per minute 10 boards of 6000 mm per minute Max real speed 180 m/min. 3rd generation of the high-speed optimizing cross-cut saw OptiCut 450 Quantum Operating device OptiCom Pro 15.6" Sawblade diameter 400 mm TCT-sawblade Sawblade bore 30 mm Ingoing lengths min./max. 1800 - 6300 mm Ingoing widths min./max. 40 - 200 mm Ingoing thicknesses min./max. 18 - 60 mm Cross sections generally rectangular Nominal cross sections (without board bend) min. 40 x 18 mm max. 200 x 50 mm max. 190 x 60 mm Feed speed infinitely variable max. 450 m/min. Acceleration max. 50 m/s² Motor power saw 7.5 kW (10 HP) Motor power feed system 15.0 kW (20 HP) Outfeed conveyor with 7 quick ejectors,

Year of construction: 2020, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 4760025, MACHINE DESCRIPTION Nwedpfx Aksznkz Ssion Special drive concept Multi-axis Profiroll CNC/AC control Two-slide design Graphical user interface Process visualization Data management Operator guidance Integrated workpiece handling The PRI 120 CNC/AC is a newly developed internal gear back-rolling machine for rolling back angles onto the tooth flanks of existing internal gears. The innovative machine concept is based on over 60 years of experience in the development and manufacture of thread, profile, and gear rolling machines in Bad Düben. The machine’s base frame is a ribbed, torsionally rigid machine bed made of cast iron, which minimizes vibrations. In particular, the use of state-of-the-art proportional valve technology in conjunction with the PROFIROLL CNC control enables optimal process control of the rolling process. The control system, in combination with the backlash-free roller guide system, guarantees the highest precision and repeatability in the positioning of the rolling slide and, thus, of the tool. The innovative handling system, in conjunction with the rolling process, allows for the shortest cycle times. TECHNICAL DATA / PARAMETERS Workpiece diameter min./max. (mm) = 60/120 Workpiece width, min./max. = 10/40 Tool mounting length (mm) = 50 Connection value (kW/A) = 16/63 Width (mm) = 3600 Depth (mm) = 3600 Height (mm) = 2680 Weight (kg) = 5700

Condition: used, This listing is for the Agilent Cary Series UV-VIS Spectrophotometer. The unit is in full working condition and ready for immediate use. Designed for accurate absorbance and wavelength measurements, it is ideal for research, quality control, and routine lab analysis applications. Transparency Report and Technical Audit: Nwjdpfxoy H Dzrs Akisn • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Little used European Spraydry Technologies model 8 - 19 Tall Form Spray 304 stainless steel ATEX rated spray dryer system. Mass balance design capabilities approximately 246kgs feed @ 10% solids with 26kgs Powder @ 5% residual moisture + 220kg/h water evaporated based on Potato Proteins. Inlet temperature 190 deg.c. with exhaust temperature 90 deg.c. Mass flowrate of drying air rated 6,895kg/hr. System includes the following parts: (1) Airco model CHP inlet fan driven by 11kw motor. (1) Lanemark model DB07 propane burner with control panel. (1) Tall form spray dryer chamber with conical base fitted with dislodging hammers fitted to cylinder and cone. Access/inspection doors. Explosion suppression bottles. (1) Stainless steel feed lance with pressure nozzle. (1) 304 Stainless steel product cyclone with explosion suppression bottles. Includes DMN Westinghouse type AL250DairyMZC-11 APS rotary lock value with motor. (1) Exhaust air chamber with explosion suppression bottle. (1) Gough type GBS550 stainless steel vibratory sifter/screen, mounted on stainless steel mobile frame. Nsdpfez D Efnex Akiown (1) Feed balance stainless steel vertical vessel. (1) FBF Italia model FBF2004/P High pressure plunger pump. (1) Mettler Toledo type V4-REM industrial flow-though metal detector with Piab conveying system. (1) Airco type CHP825 exhaust fan driven by 30kw motor. (1) Robbe model Atlas filling machine for bags with controls. Various small scale circulation pumps, pipework, instrumentation and ducting available. System has now been removed from installed production position and ready for loading Specifications: Material Of Construction: 304 Stainless Steel Type Of Spray: Nozzle

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, input voltage: 240 V, type of input current: AC, Rudolph Technologies / Onto Innovation AXi 940 b Automatic Inline Wafer Inspection Tool Nsdpfx Ajwgm Eajkiewn Model: AXi940b Lamp Operating Hours:

Condition: good (used), functionality: fully functional, A good used 6 station Volumetric cup filler which has been fitted with a variable speed indexing drive and PLC controls - cup volume of 3Litre max in single drop and system capability of multidump set on HMI controls This machine is ideal for filling any free flowing granular product or seeds/pulses - complete on floor stand and supplied with a top sub hopper. Nwedpjzzkr Djfx Akien Please request more pictures and videos which can be sent on Whats App Ready to ship worldwide

Condition: used, Veolia Water System, Model - Orion 2000 Orion™ is a skid-mounted, multi-technology purified water production system. Offering softening, reverse osmosis and continuous electrodeionization (CEDI) technologies that can be fully or partially hot water sanitized. Ideal for use as a pharmaceutical water system for the generation of purified water. Orion is digitally-enabled to offer the ability to remotely monitor any parameters you want. Nwedpfx Akjz Ic T Roisn

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 61038312, clamping force: 10,000 kN, screw diameter: 95 mm, clearance between the columns: 1,420 mm, displacement volume: 3,367 cm³, injection pressure: 1,795 bar, injection weight: 2,391 g, opening stroke: 3,200 mm, total length: 10,860 mm, total width: 3,400 mm, total height: 2,640 mm, overall weight: 50,500 kg, drive type: Hydraulisch, clear span: 1,420 mm, tool weight: 2,100,000 g, Injection molding machines directly from the manufacturer! As the manufacturer, KraussMaffei offers you our tested and versatile stock machines: The hydromechanical two-plate clamping unit of the GX machine sets new standards in terms of quality and productivity. The sophisticated GuideX guide shoe absorbs forces ideally and increases the service life of the tools. The innovative GearX locking system engages immediately and reliably. The high flexibility of the machine is particularly evident in the multi-component version. In this piggyback arrangement (Z-configuration), the system is extremely compact, and no special hall height is required, making this design particularly suitable for confined spaces. TECHNICAL DATA: KM 1000 / 6100 GX G02 (Order 38611785) CONTROL  MC6 with 21.5” TFT color screen and multi-touch function CLAMPING UNIT  Clamping force kN 10000  Tool opening force, max kN 700  Daylight (h x v) mm 1420 x 1170  Mounting plate (h x v) mm 1950 x 1750  Tool installation height min. - max. mm 500 – 1200  Opening width mm 2400  Tool opening stroke max. mm 1900  Ejector drive Hydraulic  Ejector stroke mm 300  Ejector force forward/backward kN 142 / 76  Max. tool weight kg 21000 INJECTION UNIT  Screw diameter / type mm 95 / Standard  Effective Ls/D ratio 23  Injection pressure bar 1795  Stroke volume cm³ 3367  Shot weight at max. stroke for PS g 2391  Injection speed mm/s 110  Injection flow rate cm³/s 780  Screw drive / speed 1/min 147  Plasticizing flow rate (standard screw) 4) g/s 102  Nozzle system force kN 166 ELECTRICAL PARAMETERS  Installed heating power kW 54  Power supply V / Hz 400 / 50 Nodpfxe Afhmke Akijwn WEIGHT AND DIMENSIONS  Net weight with control cabinet t 50.5  Length x width x height m 10.86 x 3.40 x 2.64 ADDITIONAL EQUIPMENT  Enlarged mold opening width  Core pull hydraulic 3+1  Core pull pneumatic 1+1  Air valves 1+1  Pneumatic cascade valve 3 +1  Hydraulic cascade 8  Water manifold 10  Euromap interfaces E18, E67, E77  Adaptive Process Control (APC+) The machine is located at our plant in Parsdorf and is available for short-term delivery. Further optional equipment can be offered on request. We look forward to your inquiry.

Year of construction: 2017, condition: used, This listing is for the Agilent Biotek 405 TS Microplate Washer The unit is in full working condition and is ready for immediate release BioTek 405 TS Microplate Washer 405TSRS Plate Carrier Source Bottle Waste Bottle Communication and power cables, and hoses Configuration Details: Manifold Type: 96-tube (8x12) Microplate Types: 96; Standard Plate Profile Volume Range: 50 – 3,000 uL/well Shaking: Yes Soaking: Yes Nodpfx Ajxv D Hwskiswn Sonication: Yes Number of Dispensing Liquids: 1 Wash Speed: 96-well, 3 cycles, 300 uL/well:

Condition: used, Prince Technologies PrinCe 560 Capillary Zone Electrophoresis System Connections: Power supply, HV control, parallel connection A, parallel connection B, serial connection A (RS232), serial connection B (RS232). Technical Data: Injection method: Up to 650 min, in 0.01 min steps; Hydrodynamics: 180 - 250 mbar, in 1 mbar steps, Electrokinetics: -30 to +30 kV, current and/or voltage. Flow/Pressure range: 0 to +3000 mbar from DCI device. Voltage range: -30 kV to +30 kV Current range: -200uA to +200uA Ramp: Programmable voltage or current ramp. Polarity reversal: Programmable before and during the sample run. Autosampler: Position carousel for 30/48 sample/buffer vials. Variable vial size, including Eppendorf micro centrifuge tubes. Buffer volume: Max. 4 ml Sample volume: Minimum 10µl, max. 4 ml. Temperature control: Sample and buffer 4°C to 40°C. Capillary temperature: 5°C to below 60°C. Detector: Allows the use of: UV/Vis, fluorescence, diode array, LIF, conductivity, electrochemical, and MS. Year of manufacture: 2004 Model: PrinCe 560 0500.022/CR S/N: 50-14-05-3-23 Dimensions: 50x50x54 cm Weight: 35 kg Nodpsu Eb D Hefx Akijwn Without functional test. More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, Core Analytical Performance • Mass Range: m/z 15 – 1,650 • Scan Rate: 5,200 atomic mass units per second (u/sec) • Mass Accuracy: 0.1 u across the entire mass range Nedpfe Aaylzex Akiewn • Mass Stability: < 0.1 u over a 24-hour period • Dynamic Range: > 6.5 × 10⁶ • Mass Resolution: Three user-selectable settings (Full Width at Half Maximum): • Unit: 0.7 u • Wide: 1.2 u • Widest: 2.5 u Ionization & Hardware Configuration • Supported Ionization Sources: Electrospray Ionization (ESI), Atmospheric Pressure Chemical Ionization (APCI), Nanospray with HPLC-Chip Cube MS interface, and Multimode source (simultaneous ESI and APCI). • Collision Cell: High-pressure, hexapole geometry equipped with linear acceleration to eliminate cross-talk and optimize fragmentation. • Scan Modes: MS scan, MS/MS Product Ion scan, Multiple Reaction Monitoring (MRM), Precursor Ion scan, Neutral Loss/Gain scan, and Selected Ion Monitoring (SIM). • Polarity Switching: Fast positive/negative switching programmed by time segments. • Vacuum System: One triple-stage turbomolecular pump backed by a standard mechanical foreline roughing pump. Physical & Utility Requirements • Dimensions: Approximately 18.5" H × 43.5" W × 26" D (47 cm × 111 cm × 66 cm) • Weight: ~236.5 lbs (107.5 kg) • Power Supply: 200 – 240 VAC, Single-phase, max consumption around 2700–2850 VA Good working condition. Please check out our other listings as well.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Universal milling machine, 3-axis machining: > Working area X = 805 mm > Working area Y = 1,015 mm > Working area Z = 220 mm > Small footprint: 1,800 x 1,500 x 1,980 mm > Spindle: 4.8 kW | max. 40,000 rpm | HSK Nodpfxeztxmgs Akiewn > Tool magazine: 15 positions > Aluminum vacuum table > 3D probe > Minimum quantity lubrication > Tool measuring system > Further optional equipment ...

Year of construction: 2018, condition: like new (used), functionality: fully functional, machine/vehicle number: M.66999.999.92, Take advantage of this unique opportunity to acquire an immediately available, like-new machine from the world-renowned premium manufacturer FRIMO. This is a fully assembled and 100% operational special machine for thermoforming/vacuum lamination, which, due to a cancelled project, never went into series production and is therefore in like-new condition. Machines of this type are often found in the premium automotive sector worldwide. One of the special features of this machine is its large forming area of up to 1,200 x 2,200 mm and its very flexible range of applications, due to its modular design and many special functions. Detailed description: Versatile ECO single-station laboratory machine or ECO single-station in-line machine for series production. Depending on the application, whether as a laboratory machine or for series production in in-line operation, and depending on the type of frame (fixed or adjustable frame), the maximum available forming area is defined. Forming areas: (with currently available frames) Nodpfx Aezd Unbskiewn In-line operation: 810 x 2,205 mm (min. 465 x 490 mm) Single-station operation: 970 x 1,970 mm (min. forming area, linear: 465 x 490) With newly manufactured frame: Single-station frame, fixed: 1,200 x 2,200 mm & single-station frame, adjustable: 1,130 x 2,200 mm Linear frame, fixed: 1,200 x 2,200 mm & linear frame, adjustable: 900 x 2,200 mm Maximum lower tool or molded part height: 470 mm Maximum tool package height for installation with upper tool: 800 mm (821 mm) Maximum upper tool height: 650 mm Number of upper platens (molds and dies): 2 Machine equipment: - Movable heater - Chain rail for automatic film feed - Clamping frame or series frame can be used Different heaters available for interchangeable use, depending on requirements: - R5 0302 D vacuum pump (300 m3/h) - 1000 L vacuum tank - 6 cooling fans DNG 6-22.5 for accelerated cooling times (including cooling air with water cooling) - Maximum lifting capacity of lower and upper tools: 4,000 kg each 1.) IR heater (Ushio) 2.) Quartz heater (TQS) (Depending on the process and material, with its specific advantages) If you have any questions, please do not hesitate to contact us. Sincerely / Best regards i.V. Alexander Reizner Sales and Project Management Service FRIMO Innovative Technologies GmbH

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range X-axis: 2,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 600 mm Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 125 mm Distance from spindle nose to table: min. 200 mm Tool holder: SK 40 DIN 69871 Pull stud: DIN 69872 Tool clamping force: 12,000 N Inner bearing diameter: 80 mm Spindle speed: max. 8,000 rpm Main spindle motor at 100% duty cycle: 29 kW Main spindle motor (intermittent): 38.5 kW Speed range with constant power from: 1,500 rpm Feed force X, Y and Z axes at 100% duty cycle: 13,000 N Feed force X, Y and Z axes (intermittent): 16,000 N Rapid traverse rate X, Y and Z axes: 30 m/min Working feed rate X, Y and Z axes: max. 10 m/min Milling performance in steel St 60: 650 cm³/min Drilling diameter in steel St 60: 60 mm Threading performance in steel St 60: M36 Tool places: 24 Tool length: max. 300 mm Tool weight: max. 10 kg Tool diameter with full magazine: max. 85 mm Tool diameter with free adjacent positions: max. 125 mm Tool change time: 3.5 s Tool change time chip-to-chip: 7 s MACHINE DETAILS Electrical connection: 55 kW Operating voltage: 400 V / 50 Hz Compressed air connection: 6 bar Node Afx Hhspfx Akijwn Coolant pump capacity: 0.75 kW EQUIPMENT Tool magazine with random tool management Coolant pump

Year of construction: 2024, condition: good (used), The energy storage system was purchased in 2024 and is being sold due to business closure. The energy storage system consists of: 6 batteries, maximum storage capacity of 200 kWh, maximum output power of 75 kW (3 x 25 kW), maximum input power of 75 kW (3 x 25 kW). The system is permanently installed in a 10-foot container. An inspection can be arranged by appointment. Nedpfxj Ab Arye Akiswn Important: The storage container was professionally dismantled by the previous operator and is now stored at our facility.

Condition: used, This listing is for the Agilent PCB1500 Water Peltier System. Nodpeyz Aqusfx Akiswn The unit is in full working condition and ready for immediate use. Designed for precise thermal regulation, it provides stable and efficient temperature control for sensitive lab processes. Ideal for integration with analytical instruments requiring consistent cooling performance Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished)

Condition: like new (used), Automatic Cage Transfer System for Autoclaves Industrial automatic system for the transfer and handling of autoclave cages or baskets, designed for the movement of loads within automated lines for heat treatment, pasteurization, and sterilization. The equipment allows for the automation of the transfer of autoclave cages between the different stages of the process, reducing manual handling and facilitating a continuous and organized flow in the sterilization area. Primarily manufactured from stainless steel, it is designed for industrial food environments and can be integrated with autoclaves, cage loading and unloading systems, conveyors, and other automatic handling equipment. MAIN FEATURES -Type: Autoclave cage transfer system -Application: Automatic handling of cages/baskets -Automated industrial transfer system -Robust construction in stainless steel -Automatic positioning and transfer of cages -Designed for sterilization and heat treatment lines -Suitable for continuous industrial operation -Integrable into existing autoclave installations -Compatible with automatic loading and unloading systems -Reduces the need for manual handling of cages APPLICATION The system is designed to automate the movement of cages used during the heat treatment, pasteurization, or sterilization of packaged food products. It can be part of an automatic autoclave line, transferring and positioning the cages between the different zones of the process. It can be integrated with: Industrial autoclaves Cage and basket handling systems Automatic loaders and unloaders Basket loading and unloading equipment Conveyors and transfer systems Nodpezwv Amefx Akijwn Accumulation systems Automatic sterilization lines APPLICATIONS A particularly interesting solution for canning industries, food processing plants, and industrial sterilization facilities that seek to automate the handling of autoclave cages. Suitable for production lines of cans, jars, pouches, trays, and other packaged products that require pasteurization or thermal sterilization in an autoclave. The system allows for improved automation and organization of the autoclave area, reducing manual intervention between the different stages of the process. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2002, condition: used, X-axis: 550mm, Y-axis: 350mm, Z-axis: 400mm, U-axis: 550mm, V-axis: 350mm, connected load: 12kVA, length: 2810mm, width: 2600mm, height: 2080mm, weight: 2.85t, operating hours: 28,608h, with documentation, an on-site inspection is possible. Nedsz Sr Nqjpfx Akiswn

Condition: used, functionality: fully functional, machine/vehicle number: MY45044074, Agilent 3458A 8-1/2 Digit Multimeter with GPIB Interface Nwodpozhmb Ijfx Akien Achieve the highest precision with the Agilent 3458A Multimeter, an 8-1/2 digit instrument designed for professional applications. This multimeter is characterized by its impressive measurement accuracy and robust design, making it ideal for use in industrial and research settings. With its intuitive user interface and fast display of measurement values, it is the perfect tool for experts who value reliability and accuracy.

Year of construction: 2021, condition: used, Manufacturer : Thémis Technologies Model: 5173 TT Year: 2021 Type: UV laser marking station Laser : keyence mdu1000C Application: The equipment is designed to laser mark different products with different types of materials. - Glass or plastic jars of different diameters - Coloured plastic bottles of different sizes - Coloured plastic tubes This equipment performs the following functions: - Receiving the product from a conveyor belt. - Detection of the product at the entrance of the machine. - Transition of the product to the laser. - When a bottle is detected, activation of the suction and laser marking. - Discharge of the marked product. A Bofa Ad Access vacuum cleaner is placed on the side outside the cabin and connected to a nozzle near the marking area. Height: 2150 mm (with glasses) Width: 1250 mm (without screen) Length: 2530 mm (with conveyor) Equipment included: printer, control computer, ... Documentation, drawings, backup, software available. Nwodpfex R Aqtex Akisn

Year of construction: 2016, condition: ready for operation (used), Life Technologies Amex 1000 Evos XL Core Digital Microscope Magnifications: 4x, 10x, 20x Dimensions: approx. 410mm x 320mm (D x W) Height: approx. 550mm Year of manufacture: 2016 You are welcome to arrange a viewing. We can organise cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you have a valid VAT ID number. Sale subject to prior sale. Visit our shop to view more of our listings. The specified company names and trademarks are the property of their respective owners and are used for identification and product description purposes only. Deviations from technical data or errors in the item description may occur and are subject to change. Nwsdpfx Asyx A Smokisn

Condition: used, functionality: fully functional, Agilent 6510 System + PC & Software. The set includes: -Agilent 6510 Q-TOF LC/MS -Agilent 1260 Infinity G1376A Capillary Pump -Agilent 1200 Series G1377A Micro Well Plate Autosampler -Agilent 1200 Series G1379B Micro Vacuum HPLC Degasser -PC & Software The Agilent 6510 Quadrupole Time-of-Flight LC/MS delivers unsurpassed Q-TOF sensitivity in a compact, bench-top design. With the 6510’s tenfold sensitivity advantage, you detect critical, low-level components that are out of reach of other Q-TOF instruments. At the same time, fast data acquisition means you can acquire one MS and five MS/MS spectra per second, for higher-quality data and more structural information from complex samples. And ultralow-ppm mass accuracy maximizes confidence in your results. Features: Nwjdpst T T Tnefx Akion -Attomole-level sensitivity – Sensitivity unequaled by any Q-TOF on the market today enables the 6510 to detect more low-abundance components. -Better than 3-ppm mass accuracy – Outstanding mass accuracy, typically 1-2 ppm, rivals FTMS instruments and increases specificity and confidence in results. -Wide in-spectrum dynamic range – 3-4 orders of magnitude in-spectrum dynamic range enables identification of less-abundant compounds in the presence of more-abundant compounds and makes overall operation easier. -Fast MS and MS/MS acquisition – Fast spectral acquisition improves the identification of unresolved components in complex samples and makes the 6510 compatible with the latest fast chromatography. -Multiple ion source options- The best selection of ion sources in the LC/MS industry-including the revolutionary HPLC-Chip/MS and multimode ESI/APCI sources-allow the 6510 Q-TOF to address a wide range of LC/MS applications Good working condition. Please check out our other listings as well.