Used 3-Rath Kalibrier+Prüftechnik Gmbh & Co. Micro Vickers Hardness Tester for sale (104,280)

Condition: new, Year of construction: 2025, Blast Container High Cube Basic with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fillings + extra blasting vessel filling, enabling extended blasting time without refilling. Type SC.20FHC.5800 Basic Standard Equipment, ready for operation (just add abrasive and connect power and compressed air): 1x Control cabinet with emergency stop, Siemens Logo controller 1x Pressure blasting vessel 1x Pressure regulator and water separator 1x Blasting hose DN 25 with 8mm blasting nozzle 1x Remote control with dead man's switch 1x Abrasive inlet box/hopper 1x Abrasive media sieve + collection container for coarse particles 1x Airwash separator for blast dust extraction (dust reduction during blasting) 1x Filter unit with pre-chamber separator 1x Suction wall with louvre-type impact separator 1x 4mm rubber wall lining with fabric insert 1x Tread plate floor 3/5 1x LED lighting 1x Emergency lighting, door-end switch, emergency stop 1x Breathing air filter 1x Blasting helmet 1x Blasting gloves 1x Coverall/suit Options: - Side Door Open: blast container can be fully opened from the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - 500kg crane runway - C-profile rail for powder coating Iiodjw Ivk Tepfx Am Ija - Blasting trolley - Filter with big bag - HEPA secondary filter for hazardous dust, e.g. when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor and much more upon request!

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 5,000 mm, inner dimension length: 15,000 mm, inner dimension height: 5,000 mm, filter area: 352 m², volume flow: 22 m³/h, Equipment: documentation/manual, lighting, Blasting house *up to 5 years warranty* for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Iodpfxou Hy Tps Am Ioia Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction

Condition: new, Year of construction: 2026, Blasting trolley 5t battery-powered for blasting system - Load capacity: 5t - For rail installation Iiodpfxeyyxido Am Isa - Battery drive - Remote control - Size: Length = 3000 mm, Width = 1000 mm - Surfaces for workpiece fixture mounts

Condition: new, Year of construction: 2026, Blast carriage 10t for blasting system with pneumatic drive. - Pneumatic drive for 10t load capacity Iiodpfx Amoyyxfrj Ija - Load capacity: 10 t - Dimensions: L=2000mm W=2000mm H=500mm - For rail system - With mounting surfaces for workpiece holders - Rotary table as an option

Condition: new, Year of construction: 2026, functionality: fully functional, Manual blasting carriage for blasting plant, 5t loading capacity Iijdpfxeyyxa No Am Iea - L = 3000mm W = 1500mm H = 500mm - Load capacity: 5t - Carriage with flanged wheels for rails in the blasting chamber - Upright profiles to allow blasting media to drain off - Tow eyes for forklift - Rotary table available as an option

Condition: good (used), Year of construction: 2005, operating hours: 15,606 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, power: 30 kW (40.79 HP), volume flow: 160 m³/h, Good day, We hereby offer you, without obligation, a used baler manufactured by Presto GmbH & Co. KG, model HPK 50 B. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we assume no liability for accuracy or completeness. Manufacturer: Presto GmbH & Co. KG Iodpfx Ajyplwfjm Isia Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions at a bulk density of 60 kg/cbm: approx. 6.7 t/hour Machine weight (press): 12.5 t Note: The machine has been repaired in our workshop (the main control valve on the hydraulic block was replaced) and tested during ongoing operation in both manual and automatic modes. Machine documentation is available in German. Viewing of the press can be arranged by appointment in our workshop. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Iiedpfx Aju Tha Iom Ioa Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1991, consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel Additional title: juice heating plant for pasteurization Capacity: 100 hl/h Perm. working overpressure: 16 bar test pressure 20,8 bar Isdpsvcqy Usfx Am Isia Wärmeaustauschfläche: 21 m2 Length: 5,6 m Width: 2 m Height: 2,4 m Operation / Control: Control cabinet with operating buttons Material: Stainless steel Base construction: Frame Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

Condition: used, This listing is for a 1 of 2 Vickers Instruments Vickers Instruments Binocular Microscope. Ijdpexxzmyefx Am Ieia The unit is in full working condition and is ready for immediate release.

Condition: new, Year of construction: 2026, Pressure blast cabinet for internal pipe blasting with turntable and manual blasting operation - Filter system Iijdpsyn Inwjfx Am Ioa - Turntable with prism for pipe support placement - Driven internal pipe lance - Program storage: travel path, feed rate, blow-off function - External blasting nozzle with oscillation (option)

Condition: new, Year of construction: 2026, Pressure blasting cabin 4-axis controlled cleaning of moulds, steel rings, ingot moulds in the aluminum, tire mold, pressing tools, etc. The travel of the jets is freely programmable. 2 PCs automatic nozzle and 1 St. hand nozzle for cleaning the parts. HARDOX turntable and feed screw for long-lasting use of the blasting machine. Isdpfx Aedrtanjm Isia For questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: new, Year of construction: 2026, Abrasive Conveyor Screw 5m with Dosing Hood For installation as a transverse screw conveyor to the bucket elevator at the end of the hall (pushing abrasive across the full hall width with a forklift) Iedpfx Ajynz Idjm Isia - 5m + outlet to bucket elevator, solid-blade screw Ø250mm with 5mm thick screw flights. - Can be used as an abrasive storage hopper. The blasting system draws abrasive as needed via a level probe. - Depending on installation depth, allows up to 24 hours of uninterrupted blasting without hall cleaning. - Hall cleaning takes only 10 minutes using a forklift or wheel loader. - Very low maintenance and repair costs compared to a complete conveyor floor. - Particularly suitable for very heavy workpieces. - Lower acquisition costs compared to a full-area conveyor floor. - Reduced foundation costs compared to a full-area conveyor floor. - Can be pushed across the full hall width as opposed to a sweep pit. - Very high warranty period.

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: – HSM VK 8818 R-FU baler – Maintenance platform – Bale chute – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor – Transverse sliding belt conveyor Iiodpoyz Af Eefx Am Isa – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: new, Year of construction: 2026, 200L mobile pressure-blasting vessel for construction sites or stationary use. Fittings are securely mounted under the handle. Very well suited for robust site applications. Comprising: - 200L pressure vessel Iodpfx Asynr E Tom Isia - Pre-sieve - Weather protection lid - Water separator - Pressure regulator - Adjustable conveying air control (air quantity for vessel and blast hose) - Blast hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57m³/min) - Abrasive metering valve, Y-piece rubber coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man's switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with bucket (Hobbock) and lid as an attachment for extended blasting without refilling - etc. Manufactured in Germany

Condition: new, Year of construction: 2026, Pressure blasting pot, 140L, mobile for construction site or stationary use. Fittings securely mounted under the handle. Very well suited for tough construction site applications. Includes: - 140L pressure vessel - Pre-filter - Weather protection cover - Water separator Isdpfeynr E Hsx Am Ijia - Pressure regulator - Adjustment for conveying air (tank air volume and blast hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety features: - Dead man’s switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with drum and lid as attachment for multi-hour blasting without refilling - etc. Made in Germany

Condition: new, Year of construction: 2026, Mobile 100L pressure blast pot for construction sites or stationary use. Fittings securely mounted beneath the handle. Ideally suited for demanding construction site applications. Comprises: - 100L pressure vessel - Pre-sieve Iodpfx Asynr Emjm Ijia - Weather protection cover - Water separator - Pressure regulator - Adjustable delivery air (air volume for vessel and blasting hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx.: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man switch with control cable - Pneumatic quick venting control Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with container and lid as attachment for extended blasting without refilling - and more. Manufactured in Germany

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Ijdpfox A U Ncsx Am Ieia Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. Ijdovtpq Hopfx Am Isia The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED METAL INSERT PLACEMENT UNIT This system is part of a larger production line; please refer to our other listings for more information. The offered system includes 3 provision stations for facing sheets, an automated adhesive application machine for sandwich panel bonding, a lay-up conveyor for manual assembly of the inlay/ribbing, gantry systems for manipulating the facing sheets, and an automated placement unit for metal inserts/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm Iedpfxsyt Nm Ss Am Ieia H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING GANTRY FOR CONTOUR & SURFACE BONDING (of the facing sheets & inlays): Number of needle valves surface: 104 Number of needle valves contour: 1 Adhesive system: 1K-PUR Number of nozzles in water spray unit: 8 AUXILIARY UNITS: Climate chamber (storage for 1K-PUR adhesive) Vacuum pump for gantry systems Punching unit

Condition: used, Technical details: plate thickness: 1 mm Iisdpfx Aowq I U Rjm Ija distance between columns: 2,255 mm bending angle max.: 130 ° total power requirement: 2,25 kW Weight approx.: 1400 kg dimension machine xH: 2,7 x 1,15 x 1,3 m Machine without foot switch but this is pre-equipped the upper beam was converted to 60 mm adjustment by the previous owner higher is only possible when dismantling for automatic operation the foot control is missing manual operation O.K. No backgauge *

Condition: used, Year of construction: 2000, machine/vehicle number: P18096N, functionality: fully functional, pressing force: 20 t, stroke length: 160 mm, total height: 2,150 mm, overall weight: 180 kg, Good day, We hereby offer you, without obligation, a used workshop press from Rodcraft, model WP 20F. Manufacturer: Rodcraft Pneumatic Tools GmbH & Co. KG Model: WP 20 F Year of manufacture: 2000 Machine No.: P18096N Hydraulic stroke: 160 mm Pressing force: 20 t Machine dimensions: 2150 x 960 x 660 mm Transport dimensions: 2150 x 980 x 750 mm Machine weight: 180 kg Note: The above technical data has been taken from the manufacturer’s brochures or other sources, for which we cannot guarantee the accuracy or completeness. Iiedpfeygm N Dex Am Isa Scope of delivery: 1 unit used workshop press Rodcraft, type WP 20F Application area and condition: The machine was occasionally used in an industrial metalworking shop for pressing out bearings, etc. The machine is fully functional and in good condition. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: used, KB Prüftechnik hardness tester type: KB 750 BVRZ Machine type: KB 750 1 kg - 750 kg UNIVERSAL DIGITAL KB universal hardness testing machines for automatic and standard-compliant hardness testing. Suitable for all hardness testing methods in the load level range HV 0.2 1 - 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (HK 1 only), ball indentation hardness (plastics) and depth measurement according to Vickers and Brinell. Fully automatic test sequence, evaluation of the impressions on the built-in LCD monitor using a built-in video camera and zoom lens guarantee maximum evaluation accuracy in accordance with the standard. All hardness values are immediately displayed digitally. User-friendly and powerful control panel with color LCD monitor, high-contrast and glare-free. The indentation is measured without parallax. The test forces are electronically controlled and applied with maximum precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with basic equipment that enables immediate commissioning with the indenters ordered. A selection of fixtures, test tables, indenters, lenses, hardness reference blocks etc. are available. Connection to a PC or central computer is possible with all KB hardness testing machines. In conjunction with the fully automatic software and motorized cross table, the machine can be operated as a fully automatic machine. Fully automatic test sequence Optical evaluation via integrated video evaluation Ijdpfx Amsu Hy Ime Ijia Extremely user-friendly and powerful large LCD color display industrially designed membrane keyboard Variable software customization zoom lens 1:7 parallax-free measurement load cells, controlled load application, LED illumination Rockwell resolution 0.025 HRC Extremely powerful 200 freely definable test programs Calibration machine accuracy (option) Innovative LED ring light (option) Automatic image evaluation (option) 2 interfaces parallel + serial, as well as keyboard connection extended load range XL (option) freely switchable language selection German, English, French, Italian KB750 BVRZ: Test load 3-750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV Depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Superrockwell Test table ∅80 mm Motor zoom 1:7 Objective 4x for HV10-HB5/750 NOT suitable for HV5 Operating function: Programmable digital panel with the following functions: Measurement of the hardness impression on the LCD display, with movable measuring marks, parallax-free Logically structured, simple operator guidance Creation and storage of any of 200 test programs Automatic force selection by selecting the test method Freely selectable test force application times Freely selectable holding times of the test forces Online help Automatic correction for curved surfaces in accordance with DIN EN ISO Control of the fully automatic test sequence Direct, digital hardness value display Tolerance display Conversions according to DIN 50150 table B1 Report generation in DIN A4 format with standard printer via parallel interface Serial interface for data output to PC Optional network 4 languages German-English-French-Italian Statistics functions, such as Number of tests Min / Max Mean value Range Standard deviation cp / cpk Histogram (Subject to changes and errors in the technical data!)

Condition: excellent (used), Year of construction: 2017, operating hours: 150,050 h, functionality: fully functional, controller manufacturer: Heidenhain, controller model: iTNC530, rotary table diameter: 500 mm, overall weight: 13,000 kg, spindle speed (max.): 14,000 rpm, operating hours of spindle: 6,950 h, coolant supply: 20 bar, spindle nose: HSK 63, number of slots in tool magazine: 60, Equipment: chip conveyor, oil mist separator, rotational speed infinitely variable, • Condition: Excellent condition • Operating hours: 6,950 • KESSLER rotary table, Ø 500 mm • Tool magazine: 60 stations, HSK-A63 • Internal coolant supply: 20 bar, with band filter system • Coolant system: Automatic coolant level monitoring • Air through spindle • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch probe system), incl. workpiece measurement preparation Ijdpfx Asx Hg Ibsm Isia • Collision monitoring: POS DCM module • Media feed: 3-channel media feed in the center of the table • Viewing: Rotary inspection window • Handwheel Please send us an inquiry directly via our website if you are interested in the machine. Due to technical reasons, direct inquiries for a quotation via third-party platforms are difficult and may be delayed.

Condition: ready for operation (used), Used heatable/coolable pressure vessel with Atex agitator and insulation Last intended use: Pharmaceuticals, cosmetics Article number: 10815 Volume: 5600 liters Type: standing on 4 feet Material (in contact with media): 1.4571 / AISI316 Design: with double jacket and insulation Operating pressure according to nameplate: +1/+3 bar Max. operating temperature: 0/ +150 °C Container dimensions: Manhole: 500mm Outer diameter: 2000mm Total height: 2870mm Total width: 2250 x 2060mm Cylindrical height: 2000mm Materials: Isdpfxjtdgkxs Am Ieia Inside: 1.4571 / AISI316 Outside parts: 1.4301 / AISI304 Facilities: Nameplate: Yes ATEX agitator Power: 22KW Speed: 1465/min Agitator: Propeller 2x spray head Connector

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB Iodsndn Agepfx Am Ioia OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site