Used 2004 Hoffmann Ms-35 for sale (13,310)

Condition: ready for operation (used), KUKA rotor for 1FK7083-5AF81 motor, serial number: YFV950654075018, with 86 61111H39 Binder brake. Used, in good condition, 100% functional. Scope of delivery as shown in the photos. Redpfx Aozd I Easblow

Condition: ready for operation (used), KUKA rotor for 1FK7083-5AF81 motor, serial number: YFV950654075025, with 86 61111H39 Binder brake, used, in good condition, 100% functional, scope of supply as shown in the photos. Rsdszc Tv Nepfx Ablsw

Condition: ready for operation (used), Indramat MDC 10.20F / MMA-0 / S06 DC servomotor, SN: 35432, used, in good condition, 100% functional, scope of delivery as shown in photos. Rodpfoy Npfhox Ablow

Condition: ready for operation (used), Indramat MDC 10.20F / MMA-0 / S06 DC servomotor SN: 35638 - Cover missing, see photos, used, minor signs of use, 100% functional, delivery as per photos. Redjy Npfnopfx Abljw

Condition: new, Zimmer MBPS3502DS1 brake trolley JF550AB with profile rail guide, holding force 2100N, unused in original packaging, 100% functional, scope of delivery as per photos. Rsdpfx Aey T Dqmsblsw

Condition: ready for operation (used), Groschopp WK 1735309 gearbox motor with brake, serial no. 9019059, with gearbox VE 31-K-R-31, gear ratio i = 5, mounting hole spacing: 46 x 46 mm, drive shaft diameter: 10 mm, used, minimal signs of wear, 100% functional, scope of supply as shown in the photos. Rjdpfsi D H U Tsx Ablow

Condition: ready for operation (used), Binder 86 61104P01 Brake 5193503650, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Redpfx Abei D T I Islew

Condition: new, Siemens 6FX1138-6BL01 PLC 135WB/ACOP, 256KB RAM E-Stand: C SN:1359, unused in opened original packaging, 100% functional, scope of delivery as shown in photos Rjdpfxoxagqmj Abljw

Condition: ready for operation (used), CMC 3528000M5000TAC-CR PM servo motor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Rsdpfx Abei D Hnxelow

Condition: ready for operation (used), Rexroth HMS01.1N-W0350-A-07-NNNN control unit MNR: R911317351 SN:HMS011-62900, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Rjdjx Euaijpfx Abljw

Condition: ready for operation (used), AEG MS350-0000-000 Permanent Magnet AC Servo Motor, Serial Number: 93-IC-483, mounting hole spacing: 71 x 71 mm, drive shaft diameter: 14 mm, used, shows normal signs of wear, 100% functional. Redpfoi D Ey Djx Ablsw

Condition: ready for operation (used), CMC 3515000M5000TAC-F0 PM servo motor, encoder cover has a crack (see photo), serial number as shown in the photo, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Rjdpfei D Hnqex Ablow

Condition: ready for operation (used), Stator for Indramat MAC 90A-0-RD-2-C / 110-A-0 three-phase servo motor, serial number: 13545, used, in good condition, 100% functional, scope of delivery as shown in the photos. Redpfey T Dnrox Ablow

Condition: ready for operation (used), Siemens SINUMERIK 840D/DE NCU 572.3 6FC5357-0BB22-0AE0 without system software, SN: ST-R52001772, professionally fully refurbished and tested with 24 months warranty, 100% functional, delivery as per photos, agreed discounts do not apply to this item. Rsdsy Nr Hhepfx Ablow

Condition: ready for operation (used), Bosch SE-B2.020.060-04.000 Brushless servo motor with brake and Heidenhain ERN 221.2123-500 encoder, ID No. 270 675 02, serial number as per photo, mounting hole spacing: 81 x 81 mm, drive shaft diameter: 14 mm, used. Rodpfx Absi D Hdksljw

Condition: ready for operation (used), Siemens 1FT5076-0AF71-1 – AC variable speed drive motor, Z = see nameplate, serial number: YFR524263501001, with Binder 77 60013A00 brake, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Rodpfx Abelg Iyxjljw

Condition: ready for operation (used), Groschopp WK 1735309 motor with brake WK1774700 + VE31-K-R-31 gearbox, gear ratio i = 5, serial number: 9019046, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Redpji D Iamsfx Ablow

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005, serial number: 68351, permanent magnet AC servo motor, mounting hole spacing: 152x152 mm, drive shaft diameter: 32 mm, used, shows normal signs of wear, 100% functional. Please request shipping costs separately! Rjdpfx Aoi D Ii Dsblow

Condition: ready for operation (used), Siemens 6FC5203-0AB10-0AA1, serial number ST-LN2004535, has been professionally and completely overhauled and tested, and comes with a 24-month warranty. It is 100% functional. The scope of delivery is as shown in the photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Rodpfxji Edywj Abljw

Condition: ready for operation (used), CMC 3515000M5000TAC-F0 PM servo motor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Rjdpfx Asi D Hnmobljw

Condition: good (used), Year of construction: 1986, Hoffmann Dübelfix chain mortiser with pneumatic lift - very good condition - Rodpfjvk Dqvsx Ablow Pneumatic tensioner Revolver stop Material support Pneumatic foot pedal Location: from stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1998, x-travel 800 mm y-travel 500 mm z-travel 510 mm total power requirement 60 kW Redet Hwtfepfx Ablew weight of the machine ca. 10 t dimensions of the machine ca. m

Condition: good (used), Year of construction: 2008, workpiece weight (max.): 5,000 kg, total width: 2,000 mm, total length: 3,500 mm, total height: 1,800 mm, Railway machine Rsdpfx Abey Uvgcsljw Hofmann - I-110K B11-VIS MACH-ID 9626 Make: Hofmann Type: I-110K B11-VIS Control: CEMB B11 Year: 2008 Balancing machine for wheel sets Work load up to 5000 Kg Kell B11 Vision CEMB controller Rail track gauge: 500-1435mm Max. wheel tread Ø: 1500mm Min. wheel tread Ø: 200mm Max. axle length wheel set:26450mm Min. axle length wheel set:500mm Speeds / ranges: 2100Rpm Number of slides: 2 Length: 3500mm Width: 2000mm Height: 1800mm Weight: 3500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 13,200 km, power: 194 kW (263.77 HP), first registration: 07/2012, fuel type: diesel, empty load weight: 44,000 kg, color: grey, gearing type: mechanical, suspension: other, operating hours: 13,200 h, Equipment: cabin, Diesel engine, year of manufacture 2012, grapple with multiple tines, 194 kW, height-adjustable cabin, tracked chassis, additional weights, 10 tons, 13,200 operating hours, major overhaul 10/2024 with new engine, invoices for €84,000.00 available and can be viewed. Own weight 44 tons. FOR US, THE CONDITION AND OUR OVERALL IMPRESSION ARE DECISIVE; THE PRICE IS SECONDARY. If you have any further questions, please do not hesitate to contact Mr. Faller on the following number. //*EXCHANGE, TRADE-IN, OR FINANCING OF YOUR VEHICLE IS POSSIBLE! All information without guarantee.* You can find more offers on our website: . The description and data provided do not constitute a guarantee and are not binding. The purchase contract concluded at the dealership upon purchase of the vehicle is binding. Errors and prior sale excepted! Rsdpfezg Dpyox Ablew

Condition: like new (used), Year of construction: 2005, functionality: fully functional, GÖTZINGER RBS Dowel and Stair Drilling Machine, Swiveling with Laser In very good condition, the machine has been used very little and is in absolutely like-new condition; it comes from an educational institution. It can be used to drill dowel holes and similar. The machine has a BKF-5 drilling head with 5 drill chucks, M10 internal thread. The distance between the drill chucks is 32 mm horizontally and 25 mm vertically. The entire drilling head can be swiveled 360° with a degree indicator and various scales. A standard 2-jaw chuck can also be used. You will also receive 3 additional drill chucks for drills with a cylindrical shank of 12 or 16 mm, and for drills with an M10 external thread. The machine table is 1100 mm wide and 250 mm deep. There is a stop at the front that can be recessed if needed. For the production of dowel joints, there are 2 adjustable angle stops on the machine table, which can be set with an accurate scale. In addition, there are two 2500 mm long stop rails with 2 folding stops and a scale each; these stop rails can be mounted on the left and right. The machine drills completely automatically, which was problematic with larger drill diameters. For this reason, the machine has been converted to manual feed via a feed lever and switch. The workpiece is clamped with 2 pneumatic clamping cylinders; the switch is located directly on the clamping cylinder. 380V, 2100W 2820 rpm Year of manufacture: 2005 Weight: approx. 300 kg Rodpfozgh Tvjx Abljw With this machine, you can produce all types of frame dowel joints, at right angles, butt joints, and miter joints. Ideal for the production of dowel joints in timber frame construction, furniture, door and window construction, and similar applications. Stairs can be manufactured very well due to the swiveling capability. The drilling unit can be swiveled to both sides up to 65° with a scale and has a detent at 0°. This allows handrails to be drilled very well into stair stringers with the machine. Due to the stops, the drilling head, and the construction of the machine, dowel joints are produced in a very short time, which makes the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled very quickly and accurately. The max. drilling height is 100 mm; the drilling height is adjusted at the front under the machine table with a handwheel. The height can be read on a very precise, mechanical counter. The max. drilling hole depth is 190 mm with a stop and scale. The max. workpiece height is 360 mm. Everything functions perfectly. Comes with a manual. We will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros. This means you have no risk when purchasing. Delivery to Austria and the rest of the EU is also possible upon request. Professional equipment, not hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the backlash-free ball bearing bushings are in good condition and move easily. The swiveling mechanism is also very smooth due to the 2 groove ball bearings; locking is possible with a locking screw.