Used Case-In Machine New for sale (82,771)

Year of construction: 2021, condition: used, MULLER MARTINI Casing-In Machine EMP 513 type K317 year 2021 For casing-in of flat spine book blocks into hard covers, as well as subsequent pressing and joint-forming of books. To be used as an individual machine. Configuration: copilot system with 2 touch screens block supply via feeding conveyor and star feeder case prestacking conveyor case magazine case bending machine case forming station casing-in gluing station with profile rollers and adjustable double glue application for the book joint area glue circulation system with pump EMP glue pump monitoring unit rubbing down unit and thin book device electronically heated 15° joint forming rails, controlled in pairs via regulator quick-change system for joint forming rails Pjdpfx Amsyr Hk Sopepr 2 pressing stations heater monitoring unit servo-controlled drive technology based on Siemens SIMOTION D delivery to the left, transport of books lying flat Special equipment: photo book block splitter hotmelt nozzle gluing unit for joint gluing NORDSON premelter Code-Matching (comparison) between book block and case via data matrix code, barcode sensor: Cognex camera double case control special equipment for the processing of flexible cases Technical specifications: mechanical speed: up to 30 cycles/min size range book block max.: 280 x 375 x 80 mm size range book block max.: 305 x 375 x 30 mm size range book block min.: 100 x 100 x 2 mm size range opened case max.: 660 x 385 mm size range opened case min.: 210 x 105 mm thickness opened case max.: 7,0 mm thickness opened case min.: 0,1 mm size range finished book max.: 285 x 385 x 90 mm size range finished book max.: 315 x 385 x 30 mm size range finished book min.: 105 x 105 x 6 mm KOLBUS Transport Conveyor System year 2021

Condition: new, New electric scrubber dryer, floor cleaning machine DAEWOO model DAFL50A Year of manufacture 2024 – unused from stock Theoretical area coverage: 2,000 m²/h Working width: 510 mm Cleaning brush diameter: Ø 510 mm Brush speed: 175 RPM Squeegee width: 850 mm Clean water tank capacity: 50 liters Dirty water tank capacity: 50 liters Noise level: 66 dBa Climbing capacity: 2% Battery voltage: 24 V, 100 AH - 24 V battery charger - 24 V, 100 AH battery - one cleaning brush - two separate tanks - without drive motor, the machine is pushed by hand or moves itself via the brush drive Ppedpfx Amexr N U Espjr Machine length: 1,200 mm Machine width: 510 mm Squeegee width: 850 mm Machine height: 1,350 mm Unladen weight: 160 kg New – in original packaging – unused from stock

Condition: new, Year of construction: 2026, HOT AIR GENERATORS by wood model FABBRI F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery NEW PRICE LIST year 2026 WHILE STOCK IS STILL AVAILABLE I CAN GUARANTEE PRICE LIST year 2024 Super discount while stocks last 100% made in ITALY for heating sheds, warehouses, work and private environments Fuels: Wood - Chips - Paper - Cardboard CE marks: Yes volt. 220 single-phase ( model F28 and F55CV ) volt. 380 ( model F85CV - F120CV - F240CV ) CV models are equipped with an additional fan for smoke expulsion at the base of the flue model available : F28 . surface to be heated up to m2 100/150 Ppsdof H Hlrjpfx Ampjr F55CV . surface to be heated up to m2 300/350 F85CV . surface to be heated up to m2 450/500 F120CV . surface to be heated up to m2 650/700 F240CV . surface to be heated up to m2 1000 Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by one or more electric motors. Electric command and control panel - adjusting thermostat. Maintenance: Ordinary maintenance means the removal of the deposited ashes by opening the door. Once or twice a year, perform a general cleaning of pipes.

Condition: excellent (used), Year of construction: 1997, Ref:10993 . 1997 Hoerauf BDM20 Case Maker. Suitable for various products such as book cases, ring binders, letter file cases, 3-piece cases, game boards, padded cases for photo albums, pocket diaries, bible cases etc. Comprising; Conveyor infeed of board In-line board cutting attachment for 3-piece boards Triple reel feeder for soft spines with auto-splice Magazine feeder for stiff or hollow spines Ppodpfsw Avmfjx Amper Shingle conveyor feed of pre-cut cloth Pre-melt tank Mobile hot-melt gluing unit and circulation pump Conveyor delivery with counter DC drive motor Complete with compressors, tools & manuals. Accessories: PVA cold glue tank for 2nd pass back lining capability. Specification: Open case size standard : Max. 380 x 680 mm Min. 130 x 190 mm Board thickness : Max. 4 mm, Min. 1 mm Spine width : Max. 80 mm, Min. 8 mm Spine thickness, flexible : Max 0.5 mm, Min 0.3 mm Rigid : Max. 3 mm, Min 1 mm Cover material : Max. 0.3 mm, Min 0.1 mm Production speed : Max. 60/min.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 759103-BDM20, Equipment: compressor, documentation/manual, Machine for Producing Hard Covers • Manufacturer: HÖRAUF (China) • Model: Classic Casemaker BDM20 • Year of manufacture: 2016 • Total production: 7,731,151 covers • Machine price: €95,000.00 The machine is in excellent condition and has been regularly maintained. Photos and a video of the machine are attached. Ppodpfx Asy Ec Nxompor

Condition: used, Year of construction: 2008, functionality: fully functional, HAAS VF-4SS Machining Center, 4th Axis – !!!! SPINDLE NEW !!!!! Year of manufacture: 11/2008, Commissioned 03/2009 Description: X-axis travel: 1270 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Distance spindle nose to table max.: 742 mm Spindle power: 22.4 kW Max. spindle speed: 12,000 rpm Max. spindle torque: 122.0 Nm at 2,000 rpm Drive system: Direct drive, inline Spindle taper: SK40 Table size (L x W): 1321 x 457 mm T-slot width: 16 mm Number of standard T-slots: 5 Feed rates: - Max. cutting feed: 21.2 m/min - Rapid traverse: 35.6 m/min Tool changer capacity: 40 stations Max. tool weight: 5.4 kg Tool-to-tool change (avg.): 1.80 s Chip-to-chip change (avg.): 2.40 s Coolant capacity: 208 L Machine weight: 6,033 kg Accessories/Options: - 4th axis rotary table, HAAS HRT210 - Spiral chip conveyor - Coolant tank 200L - Through-spindle coolant (TSC 20 BAR) - 2-stage 25µ filter system - 40+1 position tool magazine - Programmable spindle orientation - 16MB program memory - 8M functions - 4th axis interface - Manual tailstock HTS6 Machine is powered and currently in production. Ppedpfxoytpqko Ampsr

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations Ppedpfxsw Ed U No Ampjr - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: used, NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts and Bestspoke Control Parts. Machine Design and Construction. Having Expirienced Engineers and Designers Working on a Full Range of Work Shop Machinery, CNC, Plasma Cutters, Moulding Machines we Provide High End Quality and Competitive Lead Times. Usage: Butter and Various Viscous Pastes Pjdpfx Amsurulpspjpr Construction: Fully Stainless steel and Glass Blasted to provide the finish on the metal and harden the surface. Shapes and sizes: Choose your own shpe and size Volumes: Depending on Model we can offer machines for 50g Up to 25Kg Blocks in Boxes. Hopper volumes on extruders: 18 Litres and 50Litres Control panel: Butter Working Switch, Butter Extruding Switch, Start/Stop and Safety: Machine is Equiped with Stainless Steel Cover that Brings The Machine To a Stop If This is Opened. Cutting: Cutting Wires come down manualy and bring the machine to a Stop Out feed: Out Feed Conveyor is Built with Stainless Steel Rollers that help the Prodcut Slide Out Avoiding any Sticking and Changing The Prodcut Shape. Electricity: This Machine can work on Single Phase 220v /50hz , 3Phase 400v / 50hz and US Electrics on 60hz. Choose on Order. Lead time: 5weeks Warranty: 12 months Spare parts: Dairy Machinery UK Finance Available: Pay Monthly, Ask For A Quote

Condition: good (used), Schmedt PraKant Turning-in machine The PräKant is a turning-in machine designed to turn in and press down the edges during the production of book covers and other products. Weight: 150 kg Power supply: 400 V Ppsdpfx Ameywdm Aepor Flexible speed control.

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Ppjdpfowz Rifox Amper Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, machine/vehicle number: 22055, Bucheinhängemaschine / Casing-In machine Schmedt PräLeg HHS 18Buchhöhe / Book height: 80 - 340mm Buchbreite / Book width: 110 – 450mm Blockstärke / Book Thickness: 2 – 80mm Leistung / Output: Serienfertigung / Multiple production: ca. 200 - 300St/h Einzelfertigung / Single production: ca. 100 - 150St/h Elektr. Anschluss / Power supply: 200 - 240V(50Hz, O,6kW) Pressluftanschluss / Air supply: 6 bar Ppsdpfx Asiiv S Ismpjr Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2007, machine/vehicle number: 909, Bucheinhängemaschine / Casing-In machine Schmedt PräLeg HHS 18Baujahr / Year 10/2007 - Serial-No. 909 Buchhöhe / Book height: 80 - 340mm Buchbreite / Book width: 110 – 450mm Blockstärke / Book Thickness: 2 – 80mm Leistung / Output: Serienfertigung / Multiple production: ca. 200 - 300St/h Einzelfertigung / Single production: ca. 100 - 150St/h Elektr. Anschluss / Power supply: 200 - 240V(50Hz, O,6kW) Pressluftanschluss / Air supply: 6 bar Online-Video-Inspection by Skype-Video Psdpfx Aenzic Aempepr We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 2796, Buchdeckenrundemaschine - Case Rounding Machine Hunkeler BDR 40--complete clean and painted--Serial-No. 26964 Ppsdpfxsh Axcve Ampsr Output 250 - 300 pcs/h Spine width 10 - 120mm Spine length up to 450mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1981, machine/vehicle number: 9, Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 20 Case Press and Joint-Setting machine Schmedt PräForm HHS 20 Baujahr / Year 02/1981 - Serial-Nr. 09 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Ppedormul Depfx Ampor

Condition: used, machine/vehicle number: 4344, Buchdeckenrundemaschine - Case Rounding Machine Hunkeler BDR 40 (4344/1)Serial-No. 4344/1 Output 250 - 300 pcs/h Size range Spine width 10 - 120mm Ppodpfeh Axcrjx Ampsr Spine length up to 450mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2000, machine/vehicle number: 124, Falzeinbrenn- und Abpressmaschine - Book press and joint-setting machine Zechini CIMATICYear 2000 - Serial-No. 124/00 Ppodpfx Amjh Ayanspor Buch Format max. Buchhöhe 48cm x Buchbreite 35cm x Buchblockstärke 9cm Book Size max. height 48cm x width 35cm x thickness 9cm Leistung max 150 in St./h / Output 150 pcs/h Pressluftanschluss 6 bar / Air pressure supply 6 bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Casing-In / Bucheinhängemaschine - Buchformpresse / Book Forming Press Kolbus EMP - FE Year 1966 Ppjdpfxovuaqye Ampjr Block size min. 125 x 100 x 6mm / max. 370 x 270 x 80mm Case size min. 125 x 210mm / max. 370 x 62 mm Speed up to 36 cycles per minute Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Die PräLeg ist eine Buchblockbeleim- und Einhängemaschine zum Einhängen von Einzelbüchern in der Sortimentsbuchbinderei sowie für die Serienfertigung in Industriebuchbindereien und Druckereien.  The PräLeg is a casing-in machine for casing-in books in bookbinderies manufacturing short-run and widely varying size books, as well as for series production in industrial bookbinderies and printing works.  Bucheinhängemaschine / Casing-In machine Schmedt PräLeg HHS 1805 Baujahr / Year 2002 - Serial-No. 685 Ppjdpfexh Dw Hex Ampsr Buchhöhe / Book height: 80 - 340mm Buchbreite / Book width: 110 – 450mm Blockstärke / Book Thickness: 2 – 80mm Leistung / Output: Serienfertigung / Multiple production: ca. 200 - 300St/h Einzelfertigung / Single production: ca. 100 - 150St/h Elektr. Anschluss / Power supply: 200 - 240V(50Hz, O,6kW) Pressluftanschluss / Air supply: 6 bar Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Die PräForm ist eine Maschine zum Einpressen von Büchern nach dem Einhängen und dem gleichzeitigem Einbrennen des Falzes. The PräForm is a machine to press books after casing-in, setting the joint at the same time and processes single books just as well as series of books.  Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 2100 Case Press and Joint-Setting machine Schmedt PräForm HHS 2100 Baujahr / Year Serial-Nr. 77 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Ppsdpfxjxgi Hqo Amper On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 1998, I sell Polymac Rubber edgebander little used, like new. Ppodpfxsuvdzus Ampjr

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, Used Spinner VC 1150, spindle replaced in November 2025 X travel: 1,150 mm Y travel: 620 mm Ppsdeycc Hqepfx Ampsr Z travel: 800 mm Direct measuring systems on X/Y/Z axes Control: Siemens 840DE High-precision milling spindle up to 14,000 rpm as built-in motor spindle with direct drive (no belt), water-cooled Tool holder on spindle: SK 40 Machine operating hours: 22,954 Tool magazine with 32 tool stations as high-speed changer with double-arm gripper design and fast-moving tool chain

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, type of cooling: water, welding current at 100% duty cycle: 400 A, welding current (min.): 30 A, welding current (max.): 400 A, OTC CPTX-i 400 2w 30-400 AMP Synergic Water-cooled Fixed Programs Steel - Stainless steel Weldable Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Pedpfx Ajx Sd Uismpspr Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS25 Pjdpjymaduefx Ampjpr Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 25 Mp Number of strokes: 800/min Diameter for round point: 10 - 75 mm Diameter for folded point: 18 - 100 mm Diameter of reduced section for both point types: Max. 50 mm Feed speed, infinitely variable: 0 - 70 mm/sec

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS63 Valid for: Hot and cold pointing Feeding: Automatic and manual Ppodpfx Amoymadnopjr Forming capacity: 4 x 63 Mp Number of strokes: 630/min Diameter for round point: 15 - 115 mm Diameter for folded point: 28 - 150 mm Diameter of reduced section for both point types: Max. 75 mm Feed speed, infinitely variable: 0 - 100 mm/sec

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. Podpfx Asymac Rompepr The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS100 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 100 Mp Number of strokes: 560/min Diameter for round point: 20 - 170 mm Diameter for folded point: 35 - 200 mm Diameter of reduced section for both point types: Max. 110 mm Feed speed, infinitely variable: 0 - 100 mm/sec