Second-hand machinery for sale (200,000)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91128554, Year of construction: 2018, operating hours: 1,440 h, load capacity: 1,400 kg, lifting height: 4,550 mm, mast type: triplex, construction height: 2,200 mm, fork length: 1,150 mm, The forklift is in very good technical and visual condition. The tires have been replaced, and a battery service was performed in June 2026. TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 4,550 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Triplex Transmission: AC Battery type: 48V 4EPZS 620 Battery capacity C5: 620 Ah Number of cells: 24 Acid volume: 153 l Front wheels: Pneumatic tires, size 1x BA Three new wheels installed in May 2026 Control type: Standard joystick Operating hours: 1,440 h Motor power: 6.0 kW Battery service: June 8, 2026 Battery load test result: 72% (Result see appendix of the advertisement) Dimensions & Weight Iijdpszdf N Defx Aa Iec Dimensions (L x W x H): 2,500 x 1,270 x 2,200 mm Weight without battery: 2,105 kg Battery weight: 935 kg Total weight with battery: 3,040 kg EQUIPMENT Battery charger (Model: SLT150, Year of Manufacture: 2018) Operator protection roof

Condition: excellent (used), Year of construction: 2017, Technical Specifications: Total pressing force 1500 kN Iisdpjzd T Uyefx Aa Isc Setting range 10 – 100 % Total pressing surface 3100 x 1350 mm Specific pressure at full charge 3,6 daN/cm² (kp/cm²) 6 cylinders 90 mm diameter 400 mm stroke Operating hydraulic pressure 395 bar Daylight height 400 mm Daylights 2 Daylight opening 150 mm 400V 50Kz 3 phase CE 3 pieces heating devices each with 18 kW for heating up the fluid medium water to a working temperature of 130°C.

Condition: excellent (used), Year of construction: 2018, Specification Length: 4605mm Workpiece Thickness: 40mm Edge Material Roll: 0.4 – 3mm Edge Material Strip: 0.4-3mm Iedpfxszdklco Aa Ieic Feed Speed 8m/min Joint Trimming Unit 40mm Quick Change Application Unit Magazine for Coiled Material Pneumatic 2 point adjustment Pressure Zone End Trim Unit with Pneumatic Adjustment Pneumatic Adjustment Fine Trim Contour Trimming Unit Pneumatic Adjustment Profile Scraping Unit Glue Joint Scraper Buffers LED Indoor Lighting EasyTouch Control System Manual Central Lubrication Manual Top Pressure Adjustment Roller Top Pressure

Condition: excellent (used), Year of construction: 2018, Specification: Vertical Drill Block with 13 Spindles Horizontal drill block with 4 spindles in the X Horizontal drill block with 2 spindles in the Y Grooving Saw D=100mm Iiodpfx Aajzdki Us Ijc Plausibility check 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Workpiece width 70-850mm Workpiece thickness 8-56mm Powertouch screen Woodwop for machine Energy Saving Mode

Condition: excellent (used), VMI SPI 280 Av Mixer Stainless steel Complete with 1 mixing bowl Nice clean mixer Isdpfxozcrm He Aa Isic In very good condition

Condition: good (used), Year of construction: 2011, Fuji Flow Wrapper High speed horizontal form- fill - seal machine Type: FW3410/B Year of construction: 2011 Zodiac HC terminal printer Iiedpfx Asv T D D Uja Ijc 200 V, 3 Ph, 50/60 Hz, 30 A Belt width: 250 mm, seal length: 300 mm Dimensions: 3360 mm x 1200 mm x 1900 mm. Price € 14,590

Condition: excellent (used), Year of construction: 2014, Ilapak Smart Flow Wrapper Zodiac coder Suitable for clear or printed film In everyday use Adjustable infeed box In excellent condition Iiodpfx Aaswttcxo Ioc Price € 14,590

Condition: good (used), Record Panda 1000 Flow Wrapper All contact parts are stainless steel 250mm wide double Jaw feature Adjustable infeed max width 210mm Distance between flights 330mm Adjustable temperature jaws and crimpers Isdpfon R Suwjx Aa Isic Infeed length 1500mm Overall length 3500mm Variable speed 3 phase power In excellent condition Price € 5,950

Condition: good (used), Record Scorpion E Flow Wrapper Year: 2001 Packages up to 80 products per minute, depending on product. Reel dimensions: 520mm Jaws: 250mm x 150mm Up to 30 programmable products Price € 5,950 Iodpfx Aaowd Sh Us Ioic

Condition: good (used), Horizontal PFM flow rapper is specifically designed to meet any need of flexible packaging for food and non-food applications. Isdey D Uzqjpfx Aa Isic This is an ex bakery machine, in good working condition Price € 5,900

Condition: good (used), Saxon Continuous Bag Sealer Stainless steel Adjustable temperature control Iijdpfszcrlcjx Aa Ijc Electric adjustable mast height Mobile on castors Excellent condition Price € 8,900

Condition: good (used), Saxon SB1000 Bag Sealer Model SB1000 Stainless Steel Voltage 240v Digital control display Isdopyhq Aopfx Aa Ieic Cool down facility Price € 4,950

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Stainless Steel Iodov Dm Epopfx Aa Ijic 230 Volt Power Supply Price € 3,950

Condition: good (used), Semi Automatic Constant Heat Sealing Bag Machine Ijdpfx Aaoutg Dae Ioic 300mm heat seal line With foot pedal control Adjustable temperature control for different bag thickness Temperature range 30 to 200 degrees C 220 / 240 volts, 50 / 60 HZ With adjustable bag loader for different bah heights In excellent condition Price € 495

Condition: good (used), Year of construction: 2013, Saxon Bag Sealer Model SR1000 Adjustable temperature control Digital display Iijdpfjp At T Isx Aa Ijc Adjustable mast height Year 2013 Stainless steel Mobile on Castors Price € 5,950

Condition: good (used), Saxon Bag Sealer Stainless Steel Ijdpfjv Dm Dlsx Aa Ieic With Stainless Steel Conveyor 230 Volts Single Phase Power Height adjustable mast Mobile on castors Fixed adjustable feet also Conveyor belt dimensions 1500mm L x 400mm W Price € 5,950

Condition: used, OK Continuous Bag Sealer Stainless steel Adjustable temperature control for different bag gauges / micron Isdpfozcg R Tex Aa Ijic Adjustable height mast Mobile on castors Price € 4,950

Condition: excellent (used), Year of construction: 2010, Capacity Swing over bed 750mm / 29.5" Swing over carriage 480mm / 18.9" Max. Turning diameter 750mm / 29.5" Max. Turning length 3935mm / 155" Distance between centres 4000mm / 157.5" Max. load between centres 3000kg Max. load by chucking 750kg Spindle Spindle speeds 3-1000rpm spindle speed range manual 2 steps Spindle nose type A2-11 Spindle bore 6.9mm / 6.9" Spindle taper MT6 Carriage Max travel X axis 425mm / 16.7" Max travel Z axis 3935mm / 155" Rapid traverse X axis 3m/min / 120ipm Rapid traverse Z axis 6m/min / 236ipm Ball screw (diameter x pitch) X axis 32 x 5 mm Z axis 50 x 10mm Cross side width 260mm / 10.2" Turret tool post Curvic type H-4 (Manual) Number of tool positions 4 Tool site 32 x 32mm (1.25 x 1.25") Tailstock Taper in tailstock spindle MT6 Tailstock quill stroke 200mm / 7.9" Tailstock quill diameter 112mm / 4.4" Motor Main spindle motor AC18.5/15kw (25/20HP) X axis servo motor AC1.0 kW (1.3HP) Z axis servo motor AC2.9KW (3.8HP) Lubricant pump motor for headstock 0.2kW Ijdpfx Aozfac Tja Ijic coolant pump motor 0.18kW Lubricant pump motor for apron 0.025kW

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Isdpfx Aezd Uv Eja Ioic Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Condition: used, Year of construction: 2021, UK's Best Selling Automatic Crosscut Saw Built to meet the precise standards of fine joinery while embodying the robust quality of a sawmill, the globally acclaimed TR500 saw unit boasts a distinguished history of over 400 installations in the UK and over 50 years of industry use. A key component within the TR platform, the TR500 stands out with its ever-present 7.5kW saw motor - a consistent feature across the entire Stromab range. Its variable speed cutting cycle allows the precise cutting of softwoods or hardwoods, accommodating dimensions of up to 135mm in height or 360mm in width, all managed by a single top clamping unit. Infeed: The industry standard rack and pinion system featured through the Stromab range allows timber lengths of up to 14m and up to 90kg to be push fed without additional rollers. Featuring a table incline of 8 degrees, automatic lifting pusher system and a positioning accuracy of 0.4mm, the Stromab Matrix powers through your repetitive and bulk cutting requirements. Controller: Harnessing the power of an ELCO Top 12 colour touch screen, cutting lists are simple to programme using the innovative optimisation methods: BASE with board sequence, max length, or sequence. OPTI with base features and volume, minimum waste or priority. Alternatively, use our 'Design2Saw' software to pre-optimise files for the highest yield savings, loaded quickly via USB to reduce operator programming time. Specification Saw Unit: 7.5kw saw motor 500mm diameter saw blade 135mm x 120mm cutting height 360mm x 55mm cutting width Infeed & Outfeed: 90m/min positioning speed 0.4mm positioning accuracy 8 degree incline on table Servo driven rack & pinion Iiodpjzd Uqcjfx Aa Ioc 1m outfeed table as standard Automatic lifting of pusher arm Controller Elco TOP12 12" industrial touch screen PC 3 optimisation criteria - longest length, sequence & board sequence Fitted with the following options - 6000 mm in feed capacity Pneumatic lifting of pusher 10 hp saw motor Ø500 mm saw blade Opti version with full optimisation and board length reading Defect reading camera ( chalk mark reading )

Condition: used, OK Supersealer Continuous Bag Sealer Ijdpfx Ajzcff Aea Ijic Stainless steel Adjustable height Adjustable temperature control for different gauge bags Mobile on castors Bag infeed from right to left The best bag sealer on the market Price € 4,950

Year of construction: 2005, condition: used, A used Gericke CSM 722 - no internal sieve with this machine - is in working condition and mounted on stainless steel frame Ijdpszc Rbpefx Aa Ioic Ready to Ship Worldwide.

Condition: used, A used VR Twin Paddle Mixer - tested and working but will need new switchgear for motors with relevant safety interlock connected Video available by request on Whats App Iiodpszc Nz Uofx Aa Ioc Ready to ship worldwide Open to realistic offers

Condition: ready for operation (used), A good used Saxon 5 Hot Air Heat Sealer with height adjustable column and mobile trolley - right to left configuration - tested and working well - videos available on Whats App Iiodezcylwspfx Aa Ijc Ready to ship worldwide

Year of construction: 2020, condition: new, A new Cassel Ferrous In Foil Metal Detector with an aperture of 350mm x 200mm - this unit was purchased new and never used - Metal Detector for industrial foreign body detection - Metal Shark 2A BD - complete with instruction manual in English - ready to ship worldwide from our warehouse. This is a digital metal detector for conveyor applications - housing in stainless steel - Digital control box attached to sensor and IP rated IP54 Iiodjt Dkrcepfx Aa Isc Ethernet Module enables software connection (auto reporting and remote maintenance) Estimated Sensitivity based on the aperture size is Fe 3.5 - 4.5mm Comments - Sensitivity performance of Ferrous in Foil MD type depends on product speed - The faster the product through the aperture the stronger a metal amplitude becomes. Recommended belt speed minimum is 500mm/sec. Ask for video of system operating