Second-hand machinery for sale (200,000)

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Fjdpezzz N Hofx Apwogg Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Year of construction: 2023, condition: used, Opus CNC Olympus 1325 CNC Router, Working Area 1300mm x 2500mm, Gantry Clearance 300mm, Spindle Power 6kw Air Cooled, Collet Type ER32, X, Y, Axis Speed 30,000mm/min, Z Axis Speed 8,000mm/min, Pendant Hand Held Controller, Vacuum Pump (5.5kw x 1 Dual Stage), Twin Bag Extraction Unit, Ovrall Sizes 3220L x 2222W x 2000H, Weight 2100kg. S/No. 10071 (2023) Please Note: This lot is located in Birmingham, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Fsdjzy Nxajpfx Apwogg Location: These lots are located in Burton-on-Tent and Birmingham, UK. Please see individual lot for decommissioning, loading information and charges

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, Altınışık 1290 Fully Automatic Flexographic Slotter – 6,000 Sheets/Hour High-performance corrugated board flexographic printing, slotting & rotary die-cutting machine Available: Altınışık 1290 Fully Automatic Flexographic Slotter, designed for high-volume corrugated packaging production with fast automatic setup and reliable performance. Fgjdpfx Apezy Sp Ujwjg Key specifications • Maximum sheet size: 1,290 × 2,600 mm • Skip-feed size: up to 1,550 × 2,600 mm • Minimum sheet size: 350 × 750 mm • Maximum printing area: 1,290 × 2,350 mm • Maximum board thickness: 10 mm • Production speed: up to 6,000 sheets/hour • Rotary die-cutting area: 1,240 × 2,350 mm • Slot width: 9 mm • Printing plate thickness: 3.9 mm • Main motor: 15 kW Features ✔️ Fully automatic computer-controlled setup ✔️ Touchscreen control system ✔️ Automatic slotting and creasing adjustment ✔️ Pneumatic inter-unit locking ✔️ Automatic gear lubrication ✔️ Pneumatic diaphragm ink pump ✔️ Hardened gears ✔️ Hard-chrome-plated shafts A strong production solution for corrugated box manufacturers, packaging companies and high-volume carton production. Machine: Altınışık 1290 Type: Fully Automatic Flexographic Slotter Capacity: Up to 6,000 sheets/hour

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 91.898, functionality: fully functional, pressing force: 100 t, stroke length: 120 mm, throat depth: 250 mm, controller model: HACO ATL 565, working width: 3,600 mm, TECHNICAL DETAILS Fjdpfszxdxxjx Apwegg Press force: 100 t Max. working width: 3,600 mm Frame spacing: 3,300 mm Overhang: 250 mm Max. stroke: 120 mm Back gauge depth: 600 mm Crowning system: Mechanical MACHINE DETAILS Drive system: CNC Control system: HACO ATL 565 Number of axes: 3 (Y1 + Y2 + X) Dimensions & Weight Dimensions (L x W x H): 4,800 x 1,800 x 2,250 mm Weight: 8,200 kg Transport packages: 2 EQUIPMENT Mechanical crowning system Quick-release die holder Tool holder in European style Tools CE marking

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, overall weight: 6,600 kg, year of last overhaul: 2025, Overhaul work 2025 - Lifting devices overhauled - Bottle carousel overhauled - Glue roller overhauled - Roller motor replaced - New protective covers installed - Printing heads overhauled - All sensors of the glue heating system replaced - Hoses of the extraction unit replaced - Entire electrical system inspected TECHNICAL DETAILS Output: 45,000 bottles/hour Bottle format: 500 ml, 1 l, 1.5 l Labeling system Labeling method: Roll-fed / roll labeling Label placement: Wrap-around labeling Rotation direction: Clockwise Carousel movement: Mechanical cam drive with brake/clutch Optical centering system: Mechanical Head adjustment: Manual Number of bottle carousels: 25 Number of labeling stations: 2 MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Power consumption: 35 kW Current consumption: 57 A Machine weight: 6,600 kg EQUIPMENT - Mechanical cam drive with brake/clutch for bottle carousel movement - Mechanical optical centering system - Manual head adjustment - Roll-fed labeling system for wrap-around labels Fgodpozv Rp Ssfx Apwog - Two labeling stations - Safety guards

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 200008301032, measuring range X-axis: 400 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 350 mm, table width: 680 mm, table length: 855 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between October 7, 2026, and October 14, 2026! Fedezu Ixuspfx Apwsgg TECHNICAL DETAILS Measuring range X-axis: 400 mm Measuring range Y-axis: 500 mm Measuring range Z-axis: 350 mm Maximum workpiece weight: 280 kg Table width: 680 mm Table length: 855 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,100 x 1,100 mm Total weight: 500 kg EQUIPMENT PC including accessories Calypso 2017 (Rev. 6.4.16)

Condition: good (used), mileage: 565,000 km, power: 250 kW (339.91 HP), first registration: 06/1997, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: blue, gearing type: mechanical, suspension: steel-air, total length: 8,200 mm, total width: 2,500 mm, total height: 3,750 mm, loading space volume: 16 m³, Year of construction: 1997, Equipment: air conditioning, differential lock, electric window regulation, power assisted steering, = Additional Options and Accessories = - Aluminum fuel tank - Air suspension - Air-suspended seats - Air horn - Radio/CD player - Rotating beacon - Sun visor - Toolbox = Additional Information = Front axle: Steering; Tyre tread left: 40%; Tyre tread right: 40%; Suspension: Leaf spring Fjdpfjzzz Trsx Apwogg Rear axle 1: Twin tires; Differential lock; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50%; Suspension: Air suspension Rear axle 2: Lift axle; Steering; Tyre tread left: 40%; Tyre tread right: 40%; Suspension: Air suspension Number of cylinders: 6 Gross vehicle weight: 26,000 kg Technical condition: good Optical condition: good Please contact Andre, Henri, or Andre for further information.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, laser power: 3,200 W, sheet thickness (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Combined punching/laser operation: 3,000 mm × 1,500 mm Punching operation: 3,000 mm × 1,500 mm Laser operation: 3,000 mm × 1,500 mm Working area without repositioning: Large format Sheet metal thickness, structural steel max.: 8 mm Sheet metal thickness, stainless steel max.: 8 mm Sheet metal thickness, aluminum max.: 4 mm Fgedpjzyay Isfx Apwsg Maximum punching force: 220 kN Maximum punching speed (at 1 mm stroke): 900 strokes/min Maximum marking speed: approx. 2,800 strokes/min Maximum axis speed: 108 m/min Axis speed: simultaneous in X and Y axes Tool magazine: Linear magazine with multi-tools Maximum number of multi-tools: 18 Clamps: 3 Tool positions: 180 MACHINE DETAILS Laser source: Trumpf TruFlow 3200 CO₂ laser Laser power: 3,200 W Operating hours (as shown in the photo) Beam on hours: 12,716 h Laser on hours: 73,705 h EQUIPMENT SheetMaster with two large-format tables Automatic scrap sheet disposal onto lifting table

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, STERLING SRA DGSA Horizontal Semi-Automatic Year- 2019. Capacities 90° 45° L & R 60° L & R Round mm 440 410 330 Fgjdpszy Sqxefx Apwsg Square mm 440 410 310 Rectangle mm 610 x 440 460 x 270 330 x 170 Bed Height mm 860 Blade Size mm 5200 x 34 x 1.1 Cutting Speed m/min 20 - 100 Motor Kw 3 Length mm 2800 Width mm 1860 Height mm 1870 Weight Kgs 1540 Operation Semi-Automatic Vice Hydraulic Mitres 60 degrees both ways. Sliding vice from left to right. Hydraulic cutting with variable pressure and variable speed Hydraulic vice. Hydraulic bow lock at any angle. Hydraulically controlled counterbalance to prevent bow descent speed increasing during the cutting cycle. Carbide blade guides for high accuracy. Blade tension indicator. Infeed and outfeed roller sections. Machine comes with the following roller sections: 2 x 2000mm 1 x 1600mm 4 x 1000mm.

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display Fodpfx Apjzzz Rdowogg - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: used, Year of construction: 2023, Overview This Robopac Genesis Futura HS pallet winder was built in 2023. It has under 500 operating hours - technically close to new. The rotating ring carries the pre-stretch carriage around the stationary pallet for high throughput without moving the load (see Capacity below). Delivered as a stand-alone unit with integrated roller conveyor, prepared for line integration over Ethernet TCP/IP. Technical data - Manufacturer: Robopac - Model: Genesis Futura HS - Year of manufacture: 2023 - Machine type: automatic rotating-ring stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: up to 92 pallets/h (13 wraps, H 1,000 mm), 77 pallets/h (17 wraps, H 1,600 mm), 70 pallets/h (19 wraps, H 2,000 mm) - Pallet size: 800 x 1,200 mm - Load height: 1,000 - 2,000 mm (incl. pallet) - Load weight: 100 - 1,200 kg - Conveyor height: approx. 550 mm; speed 15 m/min - Machine height: approx. 4,862 mm; hall height from 7,000 mm - Pre-stretch: SCV-B carriage, electronically adjustable 150 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. diameter 250 mm, core 76 mm, max. weight 20 kg - Control: Siemens SIMATIC S7-1200 PLC, Siemens TP700 7" colour touch panel - Wrapping programs: 15 (expandable to 64), 12 steps/recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry, oil-free - Documentation and HMI languages: German / English Equipment - High-speed rotating ring: power transfer to the pre-stretch carriage via sliding contacts, Wi-Fi commands - Integrated roller conveyor with pneumatic pallet lifting station (SMC PL-D) - Automatic film clamping, cutting and wide-band sealing unit - Fixed vertical hold-down (top press unit) stabilises the load during wrapping - Roping device gathers the film web from below - Photocell for automatic pallet-height reading, plus a pre-scan photocell with 3,800 mm reflector mast - Inverter-controlled IE3 motors, SEW geared, IP55, FESTO pneumatic components, SICK photocells - Siemens Scalance S615 VPN / firewall router and Scalance XB005 Ethernet switch, TCP/IP link to up-/downstream machines - Safety: Reer Safegate SMPO 1803 light curtain, fenced enclosure, dynamic fall protection on the ring - Operator panel separate from the main switch cabinet, plus remote control unit with emergency stop - R-Connect remote monitoring hardware: cloud portal for production data and teleservice - TPM package (centralised lubrication points, maintenance intervals on display), integrated HMI troubleshooting - Complete documentation on USB stick and in print: operating / maintenance manual, wiring / pneumatic diagrams, spare parts catalogue, layout Condition Fgodpfezzz R Dox Apwog Used - almost as new, no visible production wear. Still installed and under power; inspection in operation on request. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2450099150, 1 No 2019 Elumatec MGS245/00+AMS Fsdpfx Aezupzqjpwjgg Upstroke saw with 6.7m infeed roller bed, with 7.6m outfeed roller bed – however, calibrated cutting unit to 6.8m Saw fitted with calibrated automatic measuring system for accurate cutting This machine can cut straight cuts, mitres up to 55 degrees and compound mitres. Straight cut maximum in table below. Max Width of material cutting 455mm BUYER TO ARRANGE COLLECTION OF SAW WE CAN ASSIST WITH LOADING ONTO SUITABLE VEHICLE

Condition: repair required (used), Renishaw InVia Raman Microscope Spectrometer DEVICE NEEDS TO BE RECONDITIONED PRIOR TO COMMISSIONING. Complete with MSC20 Encoded Stage Controller Fgsdpfxeym Dt Ho Apwsg RL532C50 HPNIR Laser Source A-9803-0625 CCD 1. The device doesn't come with a software license or computer. We are selling the device as it is. 2. There is a HPNIR785 Renishaw Laser Source installed on the device. Unfortunately we are a surplus seller and do not possess the expertise to test and run this machine for diagnostics. Our intentions are to sell the device for parts and leave a buyer recondition to their required standards. Device is missing some parts to make fully operational. Device is missing Renishaw Ramen Filters as seen in images. Device also is missing original Renishaw Key to open access panel.

Condition: used, functionality: fully functional, mileage: 58,109 km, first registration: 06/1971, fuel type: gasoline, axle configuration: 4x2, suspension: parabolic leaf (spring), Year of construction: 1971, Unique food truck Volkswagen T2 pickup with a custom-made round container (in the shape of a cup/can) The container is made of aluminum and is insulated/double-walled and custom-built. Fedpfxszzbbio Apwegg Standing height of over 2 meters. 2 side hatches for selling your products. 2 counters/platforms. Passage from the cabin to the sales area. Ready to drive – just start and go. 4 new tires. No mandatory vehicle inspection required. Some rust here and there, but there is no other one for sale. VAT-eligible vehicle. Transportation possible if desired. For more information or to arrange a viewing, please let us know.

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, functionality: fully functional, power: 55 kW (74.78 HP), volume flow: 9.7 m³/h, operating pressure: 8 bar, pressure (min.): 4.5 bar, pressure (max.): 8.5 bar, type of cooling: air, Equipment: documentation/manual, type plate available, Fully functional Atlas Copco screw compressor, model GA 55, in new condition. Fgedpfozzq Ewjx Apwog

Condition: used, Bertuetti Universal Dough Cutter. In working condition. With two dusters. Belt 400mm wide One additional cutter included. Price € 590 Fgsdjtpvt Tepfx Apweg We can organise shipping if you require this service

Condition: ready for operation (used), Year of construction: 2021, operating hours: 15,000 h, functionality: fully functional, Equipment: documentation/manual, 2021 Star SR32 JII Type A (15,000 hours) 4m FMB Turbo 3-36, Hydrajet UB20 High Pressure Coolant, LNS Swarf Conveyor, FireTrace Suppression, JBS Guide Bush System, Fully inspected & serviced, 30 Day Warranty # Star SR-32JII CNC Sliding Head Lathe Machine Hours: Approx. 15,000 hours Maximum Machining Diameter: Ø32 mm standard / Ø34 mm optional CNC Control: Fanuc 32i-B ## Machine Configuration * Twin-spindle CNC sliding head lathe * Main spindle and sub-spindle * Main and sub-spindle full C-axis control * Gang-type tooling system * Cross-working driven tooling * Back-working tooling * X1, Y1, Z1, C1, X2, Z2 and C2 controlled axes * Type B configuration additionally incorporates Y2 control on the back-working unit ## Main Spindle * Maximum spindle speed: 8,000 rpm * Spindle motor: 7.5 kW continuous / 11 kW short-time rating * Maximum headstock stroke: 320 mm * Full C-axis contouring capability ## Sub-Spindle * Maximum spindle speed: 8,000 rpm * Spindle motor: 3.7 kW continuous / 5.5 kW short-time rating * Full C-axis contouring capability * Maximum chucking diameter: Ø32 mm / Ø34 mm optional ## Main Tooling * 6 × turning tool positions * Tool size: 16 mm square * 5-spindle sleeve holder * Maximum drilling capacity: Ø13 mm * Maximum tapping capacity: M12 × P1.75 ## Cross-Working / Driven Tooling Configuration options include: * 3 × ER20 cross-milling positions + 2 cartridge-type positions * Or 6 × ER16 cross-milling positions * Maximum milling capacity: Ø10 mm * Maximum driven tapping capacity: M8 × P1.25 * Cross-milling spindle speed: 6,000 rpm * Cartridge-type driven tooling speed: up to 8,000 rpm * Driven-tool motor: 2.2 kW continuous / 3.0 kW short-time rating ## Back-Working * Maximum chucking diameter: Ø32 mm / Ø34 mm optional Fodpfx Apszuxfrjwjgg * Maximum front ejection length: 125 mm * Maximum projecting component length: 45 mm * Back-working tool positions: * 6 positions – Type A * 8 positions – Type B * Stationary drilling capacity: Ø13 mm * Driven drilling capacity: Ø8 mm * Stationary tapping capacity: M10 × P1.5 * Driven tapping capacity: M6 × P1.0 * Maximum back-working driven-tool speed: 6,000 rpm ## Rapid Traverse * X1 / X2 / Y1 / Z1 / Z2: 35 m/min * Y2: 24 m/min on applicable Type B machines ## Ancillary Equipment Included * 4 metre FMB Turbo 3-36 Magazine Bar Feeder * Hydrajet UB20 High-Pressure Coolant System * LNS Swarf Conveyor * FireTrace Automatic Fire Suppression System * JBS Guide Bush System ## Machine Condition & Support * Approx. 15,000 operating hours * Fully inspected and serviced * Supplied ready for production * 30 Day Warranty * Warranty valid within the UK only ## General Specification * Coolant tank capacity: 255 litres * Approximate machine dimensions: 2,690 × 1,345 × 1,780 mm * Approximate machine weight: 4,100 kg * Power requirement: 8.8 kVA * Maximum sound pressure level: 77 dB

Condition: used, Year of construction: 1992, machine/vehicle number: 12/7, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled, but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a tool grinding machine from the manufacturer Schütte, model: WU 750 CN. TECHNICAL DETAILS Fedpfx Aozy Ulfjpwjgg Rated operating voltage: 380 V Phases: 3 Frequency: 50 Hz Rated current: 25 A

Condition: used, total length: 3,350 mm, total width: 1,100 mm, total height: 1,500 mm, Colour: Blue Empty weight: 2.200 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 240 - Swing over bed [mm]: 480 Fedpfsy Nk N Ujx Apwogg - Carriage turning diameter [mm]: 260 - Distance between centres [mm]: 1500 - Bed width [mm]: 370 - Spindle bore [mm]: 65 - Min. spindle speed [rpm]: 18 - Max. spindle speed [rpm]: 900 - Options: Removable bed, Quick-change tool post, Three-jaw chuck - Swing over removable bed [mm]: 740 - Transport dimensions: 3350mm x 1100mm x 1500mm (l x w x h) - Transport weight [kg]: 2200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2015, Colour: White Weight: 4.000 kg - Year: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AE/034421 - Main motor power [kW]: 9.0 - Software: Wincut 12.2.9 - Saw blade bore diameter [mm]: 80 - Max. saw blade diameter [mm]: 320 - Max. cutting length [mm]: 4150 - Max. cutting width [mm]: 2200 - Max. cutting height [mm]: 67 - Spindle speed: Fgodpfx Apezzb I Nsweg - └ Min. spindle speed [rpm]: 1000 - └ Max. spindle speed [rpm]: 5000 - └ Spindle speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 21 - Fuse [A]: 32 - Power [kW]: 8.4 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2007, operating hours: 933 h, functionality: fully functional, power: 83 kW (112.85 HP), fuel type: diesel, volume flow: 11.5 m³/h, pressure (min.): 7.5 bar, pressure (max.): 7.5 bar, axle configuration: 1 axle, Fully functional screw compressor, Atlas Copco XAS186 DD, Deutz engine. Dutch registration. 11.5 m³ maximum, 8 bar. 933 operating hours. Fedpfx Aozy Ad Aopwsgg

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 140 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 400 mm, The design of the base machine is characterized by the following features: - Horizontal arrangement of the workpiece spindle; vertical arrangement of the milling spindle or milling head - The workpiece is mounted between the workpiece spindle stock (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide moves on the radial slide (Z-axis) - The swivel milling head is equipped with an automatic angle adjustment (A-axis); the swivel slide (Y-axis) moves tangentially to the workpiece diameter TECHNICAL DETAILS Travel range X-axis: 140 mm Travel range Y-axis: 100 mm Travel range Z-axis: 300 mm Tailstock travel W-axis: 420 mm Swivel angle of the end mill head A-axis (left): 50° Swivel angle of the end mill head A-axis (right): 60° Largest millable module with hob cutters according to DIN 8002: 4.5 mm Largest millable module for high-performance milling: 3.0 mm Number of teeth: 2–999 Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Workpiece length: max. 400 mm Milling spindle speed range B-axis: 0–1,500 rpm Workpiece speed C-axis: 0–350 rpm Milling tool data Milling tool diameter: 40–102 mm Milling tool length: max. 230 mm Radial front diameter (standard): 16–32 mm Fsdpozwmyiofx Apwjgg Milling coordinates Z-axis: 100–400 mm X-axis: 130–150 mm Y-axis (end face of the milling spindle): 50–230 mm W-axis (end face of the tailstock spindle): 165–585 mm Feed rate X-axis: 3,500 mm/min Feed rate Z-axis: 3,500 mm/min Feed rate Y-axis: 4,000 mm/min Feed rate W-axis: 5,500 mm/min Feed rate V-axis (portal loader): 80,000 mm/min EQUIPMENT IBH control system Loading device Extensive range of accessories

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM - Cooling: external lubrication or by centre-cooled drills Sawing machine: - Machine size: Length=1850mm swivel range 3500mm Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm - Weight: approx. 3 tons Fgjdpezytmzefx Apwsg - Electric equipment: 400V / 50Hz - Power of motor: 7.5 kW, frequency regulated - Cutting speed: 17-110 m/min Technical capacities: more information can be found in the documentation - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Tool clamp: ISO 40 Tool holders: 2x 5 pockets The industrial PC and the business software were updated in April 2025 (retrofit). The installation has been serviced annually.

Condition: used, Year of construction: 1996, operating hours: 12,171 h, total width: 2,300 mm, total height: 2,400 mm, total length: 9,000 mm, Colour: Grey Empty weight: 10.000 kg BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 - Year: 1996 - Documentation available: Yes - CE marking present: Yes - Bottom sander: - CE certificate present: No - Serial number: 98015305 - Operating hours: 12171 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Top sander: - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Structuring brush present: No - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Voltage [V]: 380 - Current consumption [A]: 172 - Transport dimensions: 9000mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Fgodpfx Aownh Eqopwsg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, axle configuration: 3 axles, first registration: 09/1999, color: other, Year of construction: 1999, Empty weight: 5.040 kg Fjdpfx Apjy S T Ilowsgg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 10 mm right 10 mm