Second-hand machinery for sale (200,000)

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, conveyor belt length: 4,000 mm, conveyor belt width: 600 mm, machine/vehicle number: 3002097/2, TECHNICAL DETAILS Temperature range: Ambient temperature to -110 °C Lrodpfxjz I Ti As Abyju Design: Stainless steel mesh belt Belt length: 4,000 mm Belt width: 600 mm MACHINE DETAILS Power supply: 3-phase EQUIPMENT Stainless steel mesh belt Continuous conveyor belt system Suitable for integration into continuous hardening systems

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: CO1040, The following components have been replaced: Engines Gearboxes Lrsdpoz I Tkmefx Abysu Chains TECHNICAL DETAILS Design: Double-shaft paddle mixer Material: Stainless steel Batch capacity: 1,200 kg EQUIPMENT Stainless steel storage container at the bottom

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, power: 100 kW (135.96 HP), conveyor belt length: 4,000 mm, product height (max.): 100 mm, machine/vehicle number: 5-199, TECHNICAL DETAILS Freezing capacity: 100 kW / 29.41 tons Net belt width: 1,250 mm Freezing belt length: 4,000 mm Maximum product height: 100 mm Adjustable dwell time: 0.5–20 min Number of high-speed fans: 6 MACHINE DETAILS Voltage: 380–500 V Frequency: 50–60 Hz Power consumption: 5 kW EQUIPMENT Stainless steel construction Stainless steel net belt Lrjdjz I Ticepfx Abyeu 6 adjustable internal high-speed fans Stainless steel control cabinet Siemens PLC Siemens Simatic touchscreen HMI

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Sterilization process: Vacuum-assisted steam sterilization Sterilization temperature: 121–134 °C Vacuum cycles: Pre- and post-vacuum Chamber material: Stainless steel AISI 316L Pipe material: Stainless steel AISI 316L MACHINE DETAILS Control: PLC-based control Operation: HMI touchscreen Monitoring: Real-time cycle control with batch documentation Sensors: Integrated temperature and pressure sensors Standards: EN 285, PED, ISO 9001, GMP Validatability: According to ISO 17665 EQUIPMENT Stainless steel sterilization chamber with polished surface Vacuum pump system for pre- and post-vacuum Steam generation and steam distribution system PLC control with HMI touchscreen Integrated temperature and pressure sensors Diagnostics: Integrated self-test functions Media supply: Steam, water, compressed air, and power supply Door operation: Automatic Ljdpfjz I Ti Nox Abyjru Door locking: Safety interlock to prevent opening under pressure

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Lrsdpfez Tf D Rox Abyju Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 1304, functionality: fully functional, pressing force: 367 t, stroke length: 100 mm, table width: 525 mm, table length: 430 mm, table height: 800 mm, No minimum price – guaranteed sale to the highest bidder! Lodpfx Ajz Tf Enobyoru EXW – Buyer is responsible for dismantling and loading! The machine was rebuilt in 2018! TECHNICAL DETAILS Press force: max. 3,600 kN Ram stroke: max. 100 mm Ram adjustment: 40 mm Stroke rate: 40 strokes/min Table area: 430 × 525 mm Table height: 800 mm MACHINE DETAILS Connected power: 7.5 kW Mains connection: 3-phase, 380 V, 50 Hz Control voltage AC: 220 V Control voltage DC: 24 V Main motor power: 7.5 kW Oil capacity: 50 l Ambient temperature: +5 °C to +40 °C Average temperature over 24 h: max. +35 °C Humidity: 30–95 %, non-condensing Altitude: 1,000 m above sea level Noise level: ≤ 70 dB Dimensions & Weight Dimensions (W x D x H): 1,200 x 2,000 x 2,400 mm Space requirement: approx. 1,500 mm Machine weight: 8,000 kg Control cabinet dimensions: 800 × 1,200 × 300 mm Control cabinet weight: approx. 100 kg EQUIPMENT Operating manual Testing information Digital documentation Note: Induction unit is not included in the scope of supply.

Condition: used, B & C Italy Lodpfx Abs Adq N Soyjru Automatic Filling, Ingredient Dosing, Ingredient Mixing, Weighing, Small Bag Form & Filling 5 - 200 |Lts Bags, Bulk Bag Filling 1 - 2 Ton, Bag Penetration Device for Hole Insertion in Small Bags, Palletising Line Currently used for Peat Processing and bagging The line is currently powered up and can be seen running (without product) Video of line running available

Condition: excellent (used), Year of construction: 2016, TECHNICAL DETAILS Control System CNC control: FANUC Professional 5 Axes and Travel Ranges X-axis: 550 mm Y-axis: 1,000 mm Z-axis: 500 mm C-axis: 360°, continuous rotation A-axis: 150° (+30° / 120°) C-axis measuring system: Rotary encoder A-axis measuring system: Rotary encoder Feed Rate and Rapid Traverse Feed rate X-axis: 32 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Rapid traverse A-axis: 18 m/min Rapid traverse C-axis: 18 m/min Lrodpfj Aayfhjx Abysu Work Table and Workpiece Table dimensions: 500 mm Maximum workpiece size: 650 × 500 mm Workpiece weight: max. 350 kg Spindle Spindle speed: max. 14,000 rpm Tool System Tool holder: HSK-A63 Tool magazine: 323 positions Tool changer: Double gripper Tool diameter: max. 70 mm Tool diameter with adjacent occupied positions: max. 140 mm Tool length: max. 300 mm Tool weight: max. 8 kg Operating Hours Total operating time: 63,813 h Spindle running time: 30,592 h Machine Dimensions and Weight Length: 3,550 mm Width: 2,900 mm Height: 3,200 mm Machine weight: 15,700 kg EQUIPMENT Electronic handwheel Chip conveyor Measuring probe

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 559 mm, travel distance Z-axis: 660 mm, controller manufacturer: Milltronics, controller model: Centurion 7, total height: 2,740 mm, total length: 3,050 mm, total width: 2,440 mm, table width: 610 mm, table length: 1,016 mm, overall weight: 7,250 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, 2007 Milltronics VM22 CNC Vertical Machining Centre Used 2007 Milltronics VM22 vertical machining centre for sale. Centurion 7 control, 1016 x 559 x 660mm travels, 8,000 rpm spindle, 24-tool ATC and tooling included. Manufacturer: Milltronics Model: VM22 Machine Type: 3 Axis Vertical Machining Centre Year: 2007 Control: Centurion 7 Includes: Large Selection of Tool Holders Machine Description Used 2007 Milltronics VM22 CNC Vertical Machining Centre available for sale. A substantial American-built 3-axis vertical machining centre offering a generous working envelope, 24-station automatic tool changer, 8,000 rpm spindle and the well-established Milltronics Centurion 7 CNC control. This particular machine is a VM22 Series B and is supplied with a large selection of tooling, making it an attractive package for general precision engineering, subcontract machining, toolroom work, mould work and batch production. The VM22 provides approximately 1,016mm X-axis travel, 559mm Y-axis travel and 660mm Z-axis travel, combined with a large 1,143 x 610mm table. Technical Specifications Manufacturer: Milltronics Manufacturing Company Model: VM22 Series: B Year: 2007 Machine Type: CNC Vertical Machining Centre / Vertical CNC Milling Machine Control: Milltronics Centurion 7 Number of Axes: 3 Serial Number: 9868 Axis Travels X-Axis Travel: Approx. 1,016mm / 40" Y-Axis Travel: Approx. 559mm / 22" Z-Axis Travel: Approx. 660mm / 26" The 40" x 22" x 26" working envelope is one of the defining specifications of the VM22. Worktable Table Size: Approx. 1,143 x 610mm / 45" x 24" The large table and 22" Y-axis travel provide useful capacity for larger components, multiple vices and production fixtures. Spindle Maximum Spindle Speed: Approx. 8,000 rpm Spindle Power: Approx. 24 HP / 18kW peak rating Spindle Taper: 40 Taper / CAT40-type specification The combination of a 40-taper spindle and substantial machine construction makes the VM22 suitable for both general milling and heavier material-removal work. Automatic Tool Changer Tool Capacity: 24 Tools The machine is equipped with a 24-position automatic tool changer, providing sufficient tooling capacity for multi-operation machining without frequent manual tool changes. Milltronics Centurion 7 CNC Control The machine is equipped with the Milltronics Centurion 7 CNC control. The Centurion series became particularly popular in toolrooms and general engineering companies because of its conversational programming capability while still supporting conventional CNC/G-code programming. This makes the machine particularly suitable for: One-off components Small-batch machining Toolroom work Subcontract machining Prototype manufacture Production milling Operators transitioning from manual to CNC machining Tooling Included A large selection of tooling is included with the machine. Electrical Specification Input Voltage: 400V Phase: 3 Phase Frequency: 50/60Hz Full Load Current: Approx. 50A Largest Load: Approx. 40A Lrodjz Rqcyjpfx Abyju Approximate Machine Size & Weight Machine Length: 3,050mm Machine Width: 2,440mm Machine Height: 2,740mm Approximate Machine Weight: 7,250kg

Year of construction: 2021, operating hours: 17,634 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lift Mast Mast type: Duplex mast Lift height: 5,495 mm Free-lift mast: Without center hydraulic cylinder Free lift: No Load Capacity and Forks Load capacity: 3,500 kg Fork length: 1,200 mm Hydraulically adjustable forks: Yes Side shifter: Yes Drive Drive type: LPG (liquefied petroleum gas) Diesel drive: No MACHINE DETAILS Machine data Manufacturer: Linde Type: H35T Year of manufacture: 2021 Operating hours: 17,634 h Self-weight: 5,516 kg UVV certificate valid until: Formerly a Linde full-service unit Facelift model Dimensions Overall length: 5,200 mm Overall width: 1,450 mm Overall height: 3,424 mm EQUIPMENT 3rd and 4th hydraulic valve Fork positioner with side shifter Full cabin Air conditioning Heater Windshield wiper Comfort seat with lumbar support Lrjdpsz R Dqwefx Abyou Seat heating LED work light, front LED work light, rear Road traffic lighting with turn signals Orange warning light Safety light, front Safety light, rear All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of delayed collection, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 45

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 2190, functionality: fully functional, operating hours: 3,500 h, 5 axis cnc used for many applications with new touch screen set up and adopted to new air cooled spindle, tool changer and renishaw possible Lrodpszhaqcjfx Abysu

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Ljdpfxoz I Tt Io Abyjru Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Condition: ready for operation (used), functionality: fully functional, A well built Pedestal Auger Filler from Webb Automation - controls have been simplified and replaced - original hardware and drive units - stainless steel contact parts throughout - three phase supply - automatic level probe to control a separate infeed device - complete unit working well Lrjdpfxo Adq U Is Abyju Mounted on frame with castors and jacking feet Height Adjustable platform under outlet Ideal Powder Filler for filling bags or containers Request videos and pictures via Whats App Ready to ship worldwide

Year of construction: 1987, condition: excellent (used), functionality: fully functional, 1987 Finzer ZUB 250 Multislide Punching & Forming Machine Used 1987 Finzer ZUB 250 multislide machine for sale. 250kN press unit, 6 forming slides, manual decoiler and 250mm feed. Very good condition. Manufacturer: Finzer Model: ZUB 250 Machine Type: Multislide Punching & Forming Machine Year: 1987 Condition: Very Good Machine Description The Finzer ZUB 250 is a heavy-duty mechanical multislide stamping, punching and forming machine designed for the high-volume production of complex components from strip and wire. This machine is equipped with a 250kN / 25-tonne press unit, a set of six forming slides and a manual decoiler, providing a versatile production system capable of combining punching, blanking, bending and forming operations within one production cycle. Multislide technology is particularly effective for components requiring several bends or forming operations from different directions. Compared with conventional single-slide power presses, the multiple independently arranged forming slides allow complex parts to be produced efficiently with reduced secondary operations. Main Specifications Manufacturer: Finzer Model: ZUB 250 Year: 1987 Machine Type: Multislide Punching & Forming Machine / Stamping & Bending Machine Press Capacity: Approx. 250kN / 25 tonnes Number of Forming Slides: 6 Maximum Feed Length: Approx. 250mm Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Forming Slide Capacity: Approx. 30kN per slide Forming Slide Stroke: Approx. 0–50mm Maximum Production Speed: Up to approx. 400 strokes/minute, depending on tooling, component and material Machine Weight: Approx. 4,000kg 250kN / 25 Ton Press Unit The machine incorporates an approximately: 250kN / 25-tonne press station The press operation can then be combined with movements from the surrounding forming slides to produce complex finished components in a continuous cycle. Six Forming Slides This Finzer is supplied with a complete set of six forming slides. The multiple-slide arrangement is one of the main advantages of the ZUB system, allowing tooling to approach the component from several directions during the same production cycle. Forming capacity per slide: 30kN Slide stroke: Adjustable up to approximately 50mm The slides can be tooled for sequential bending, forming and positioning operations. Manual Decoiler Included The machine is supplied with a manual decoiler for coil-fed production. Coil & Strip Feed Capability Lsdpfez S T Inex Abysru Comparable Finzer ZUB250 machines are specified with: Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Maximum Feed Length: Approx. 250mm Feed length is typically adjustable to suit the individual component and tooling setup. High-Speed Production Depending on component design and tooling, period ZUB250 specifications quote operating speeds of approximately: 25–400 strokes per minute This makes the Finzer particularly suitable for repetitive, high-volume manufacture where several conventional press and forming operations might otherwise be required. Mechanical Cam-Controlled Multislide System The Finzer ZUB series uses a mechanically controlled cam-driven forming system. Cam-controlled multislide machines are particularly effective for repeat production because the motions of the forming tools can be precisely coordinated with the press and material feed.

Condition: ready for operation (used), functionality: fully functional, operating hours: 10,386 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL Manufacturer: Still Type: RX20-18 Year of manufacture: 2019 Drive type: Electric Operating hours: 10,386 h Load capacity: 1,800 kg LIFTING EQUIPMENT Lrsdps Ad N D Usfx Abyju Mast type: Triplex mast Lifting height: 4,500 mm Full free lift: available FORKS AND HYDRAULICS Fork length: 1,000 mm Hydraulic valves: 3rd + 4th valve Fork positioner: hydraulic Side shifter: available BATTERY Battery year of manufacture: Battery voltage: 48 V Battery capacity: 898 Ah Battery idle voltage: 54.6 V MACHINE DETAILS DIMENSIONS AND WEIGHT Overall length: 3,000 mm Overall width: 1,150 mm Overall height: 2,060 mm Dead weight: 3,400 kg EQUIPMENT Battery charger Semi-cabin Lateral fall protection LED work light (rear) Orange warning light Comfort seat with lumbar support Seat heating Lot number: 229 Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! Lrsdpfxez I S Uwj Abyou TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Sheet metal thickness aluminum (max.): 20 mm MACHINE DETAILS Control type: CNC control Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Type of cooling: Water Compressed air connection: 7 bar Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg EQUIPMENT CE marking Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Fume extraction Safety light curtain

Condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS General Information Manufacturer: Baykal Type of Machine: Hydraulic Plate Shear Model: HNC 8100/6 Working Area Working Width: 8,100 mm Sheet Thickness: max. 6 mm EQUIPMENT Motorized Back Gauge Automatic Shear Gap Adjustment Lsdez R Dwkjpfx Abyjru Automatic Angle Adjustment Sheet Support Device

Condition: like new (used), Year of construction: 2019, Sundyne HMD Kontro 1.5x1x6 Sealless Magnetic Drive Centrifugal Pump Ledpfx Abo Ad N Awjyjru Sundyne HMD Kontro magnetic-drive centrifugal pump for industrial process and fluid-transfer applications. The sealless magnetic-drive design is intended for applications where minimising the risk of process-fluid leakage is important. Technical details - Manufacturer: Sundyne HMD Kontro - Type: Magnetic-drive centrifugal pump - Size: 1.5 × 1 × 6 - Material of construction: 316L - Condition: Brand New Suitable for consideration by chemical, pharmaceutical and general process industries, subject to the specific liquid, temperature, pressure and materials requirements. Sale details - Equipment available from Ireland - International enquiries welcome - Price: On request - Inspection and additional photographs available on request Please enquire for the full specification, condition report and quotation.

Condition: excellent (used), Year of construction: 2010, operating hours: 32,300 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 11 kVA, controller manufacturer: Hurco, controller model: WINMAX, workpiece weight (max.): 340 kg, table width: 356 mm, table length: 762 mm, table load: 340 kg, overall weight: 2,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 32,300 h, spindle motor power: 11,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2010 Hurco VM10 CNC Milling Machine with CAT 40 Spindle, WINMAX Control 2010 Hurco VM10 Vertical Machining Centre with WINMAX CNC Control, CAT 40 spindle, 20-tool ATC and premium software package. Good condition. Delivery throughout Ireland, UK & Europe. Manufacturer: Hurco Model: VM10 Machine Type: 3 Axis Vertical Machining Centre Year: 2010 Hours: 32,300hrs Control: WINMAX Condition: Excellent For sale is a 2010 Hurco VM10 Vertical Machining Centre in good working condition, equipped with the renowned Hurco WINMAX CNC Control (Version V08.01.04.33) and a CAT 40 10,000rpm spindle. The Hurco VM10 is recognised worldwide as one of the most reliable and user-friendly vertical machining centres for precision CNC milling, toolroom machining, prototype manufacture, small batch production, mould making, and general engineering. With 32,300 machine hours, this machine remains an excellent opportunity for engineering companies looking for an affordable, high-quality used CNC machining centre from one of the industry's most respected manufacturers. Please note: No tooling is included with the machine. Technical Specifications Manufacturer: Hurco Model: VM10 Year: 2010 Machine Type: Vertical Machining Centre CNC Control: Hurco WINMAX Mill V08.01.04.33 Machine Hours: 32,300 Hours X Axis Travel: 660 mm Y Axis Travel: 406 mm Z Axis Travel: 508 mm Table Size: 762 × 356 mm Maximum Table Load: 340 kg Spindle Taper: CAT 40 Spindle Speed: 10,000 RPM Spindle Motor: 11 kW (15 HP Peak) Automatic Tool Changer: 20 Station ATC Rapid Traverse (X/Y/Z): 24 m/min Machine Weight Approx.: 2,900 kg Condition: Excellent Working Condition Tooling: No Tooling Included Installed WINMAX Software Options This machine is equipped with an excellent range of factory software options including: Advanced Verification Graphics DXF File Import NC Productivity Package Industry Standard NC Programming UltiPockets Rigid Tapping Helical Ramp Milling Lodpfsziu Hzsx Abyjru 3D Mold Package NC Conversational Merge Swept Surface Machining Select Surface Finish Quality These options significantly enhance programming flexibility, machining accuracy and production efficiency, making the VM10 suitable for both conversational programming and full ISO/G-Code machining. Notes: *Specifications are given in good faith but not guaranteed* Key Features Hurco WINMAX Conversational CNC One of the easiest CNC controls to learn and operate, allowing operators to quickly produce components without extensive G-Code programming. CAT 40 High-Speed Spindle The industry-standard CAT 40 spindle provides excellent tooling availability and rigidity for machining steel, aluminium, plastics, composites and engineering materials. 20 Station Automatic Tool Changer Fast automatic tool changes reduce machining time and improve production efficiency. Compact High-Performance Design Large machining travels combined with a compact footprint make the VM10 ideal for workshops where floor space is at a premium. High-Speed Precision Machining The 10,000 RPM spindle combined with rapid traverse rates enables efficient production while maintaining excellent surface finishes. Proven Hurco Reliability Hurco machining centres are recognised worldwide for their durability, ease of maintenance and excellent resale value. Machine Condition: Excellent Condition Fully operational Ready for immediate production No tooling included in sale Inspection welcome

Condition: used, machine/vehicle number: H2X386V04722, Year of construction: 2019, operating hours: 25,272 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork carriage adjustment range: 350–1,050 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery type: 5 PzS Ledjz S Nq Sepfx Abyoru Battery year of manufacture: 2023 Battery voltage: 48 V Battery capacity: 625 Ah Rest voltage: 51.3 V Dimensions and weight Dimensions (L × W × H): 3,200 × 1,150 × 2,761 mm Own weight: 3,800 kg Operating hours: 25,272 h Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 EQUIPMENT 3rd and 4th valve Formerly a Linde full-service machine Facelift model with tilt angle indicator Fork carriage with side shift Lateral fall-through protection, easily removable White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the front Safety light at the rear Comfort seat with lumbar support Seat heating All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on-site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 157

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, total length: 495 mm, total height: 780 mm, total width: 585 mm, overall weight: 17 kg, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be organized by the buyer! The system is available immediately! TECHNICAL DETAILS Build volume X-axis: 230 mm Build volume Y-axis: 190 mm Build volume Z-axis: 200 mm Layer height: 0.06–0.4 mm Build plate: Heated glass plate Build plate temperature: up to 120 °C Filament diameter: 2.85 mm Nozzle temperature: up to 280 °C Print speed: up to 150 mm/s Material flow: up to 24 mm³/s Compatible print cores: AA 0.4; BB 0.4; AA 0.25; AA 0.8; BB 0.8; CC 0.4; CC 0.6; DD 0.4 MACHINE DETAILS Technology: Fused Deposition Modeling (FDM) Software Print preparation: UltiMaker Cura, Cura Cloud Printer management: UltiMaker Digital Factory Supported operating systems: Windows, macOS, Linux Ledpfx Aboz Tf D Doysru Environmental conditions Operating temperature: 15–32 °C Operating humidity: 10–90% RH, non-condensing Storage temperature: 0–32 °C Non-operating humidity: 10–90% RH, non-condensing Installation: Away from direct sunlight Power supply: 100–240 V AC Mains frequency: 50–60 Hz Power consumption: 350 W Operating noise: < 50 dB(A) Connectivity: WLAN 2.4 GHz, LAN, USB Monitoring: HD camera Dimensions & Weight Dimensions: 495 × 585 × 780 mm Net weight: 14.4 kg Operating weight: approx. 17 kg EQUIPMENT Dual-extrusion print head Automatic nozzle lift system Interchangeable print cores Dual-gear feeder Filament flow sensors Dual spool holder with NFC detection Color touchscreen HD camera Heated glass plate PEI print bed Spool holder with material guide Power cord Ethernet cable USB stick Operating manual CE marking Print Core AA 0.4 – 2 pieces Print Core BB 0.4 – 1 piece Nozzle cover – 3 pieces

Condition: used, machine/vehicle number: H2X391X00341, Year of construction: 2020, operating hours: 15,584 h, load capacity: 2,000 kg, lifting height: 4,625 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 4,625 mm Fork length: 1,200 mm MACHINE DETAILS Mast: Triplex mast Lift type: Full free lift Drive type: Liquefied petroleum gas (LPG) Dimensions & Weight Dimensions (L x W x H): 3,600 x 1,150 x 2,121 mm Weight: 3,391 kg UVV certificate valid until: 06/2027 Lsdpez Nxg Djfx Abyoru Next service due in: 416 hours Operating hours: 15,584 hours EQUIPMENT Former Linde full-service unit Full cabin Heater Windshield wiper Tilt angle indicator Fork positioner Side shifter LED work light (front) LED work light (rear) Safety light (rear) Comfort seat with lumbar support Seat heating LPG gas cylinder Hydraulically adjustable forks Side shifter Hydraulic valves: 3rd + 4th valve All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 182

Condition: good (used), Year of construction: 2011, Fuji Flow Wrapper High speed horizontal form- fill - seal machine Lrjdpfjv T D D Uex Abyju Type: FW3410/B Year of construction: 2011 Zodiac HC terminal printer 200 V, 3 Ph, 50/60 Hz, 30 A Belt width: 250 mm, seal length: 300 mm Dimensions: 3360 mm x 1200 mm x 1900 mm.

Year of construction: 2021, condition: new, functionality: unexamined, machine/vehicle number: UNI701, We offer this new UNIMAC-GHERRI UNI701 glass jar depalletizer, year of manufacture 2021. Manufacturer: UNIMAC-GHERRI Lrjdpfx Ae Aavzxsbyeu Machine type: Depalletizer Model: UNI701 Serial number: M0034001 Year of manufacture: 2021 Country of origin: Italy If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, machine/vehicle number: H2X393V04185, Year of construction: 2019, operating hours: 14,576 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,615 mm Fork length: 1,350 mm MACHINE DETAILS Mast type: Duplex mast Lift type: Full free lift Drive type: LPG Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,250 x 2,441 mm Own weight: 4,665 kg UVV certificate valid until: 09/2027 Next service due in: 423 hours Operating hours: 14,576 hours EQUIPMENT Former Linde full-service unit 3rd hydraulic valve 4th hydraulic valve Side shifter Hydraulic telescopic forks Integrated scale Full cabin Air conditioning Heater Windshield wiper LED work light, front LED work light, rear Safety light, front Safety light, rear Safety light, side Rear view camera Comfort seat Lumbar support Seat heating LPG gas tank Facelift model with tilt angle indicator All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Lrsdpfxjz Nxd Nj Abyeu Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 171