Low loader semitrailer

Radmulden VFR-SO

Condition: used, overall weight: 6,200 kg, first registration: 01/2005, Year of construction: 2005, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, aluminum body Ijdpsi Rqinjfx Amieib Body: Aluminum wheel wells, floor length 1,350 mm per well, load capacity 6,200 kg, package price ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: good (used), Year of construction: 2019, machine/vehicle number: 24451.19, Offer 25359 Technical Data: - Cutting capacity at 90° (round): 250 mm - Cutting capacity at 90° (flat): 275 x 180 mm Iedpfx Asxup Rfemijib - Miter adjustment to the left - Cutting capacity at 45° (round): 200 mm - Cutting capacity at 45° (flat): 190 x 180 mm - Cutting capacity at 30° (flat): 130 x 110 mm - Material support height: approx. 920 mm - Saw band dimensions: 3100 x 27 x 0.9 mm - Infinitely variable cutting speed: 15 to 100 m/min - Hydraulic lifting and lowering of the saw frame - Upper travel limit of the saw frame - Infinitely adjustable cutting pressure: 0 – 10 m/min - Hydraulic material vice - Micro-spray cooling system - Total drive power: 400 V / 2.2 kW - Required space approx.: W 2400 x H 1600 x D 1800 mm - Weight approx.: 1300 kg - 3 x Roller conveyor, each 1500 mm

Condition: good (used), Year of construction: 2001, Separator TEBA 240 DG Round 240 mm Rectangular 230 x 230 mm Motor 1,5kW Dimensions: 1,950 x 1,650 x 1,000 mm Mitre saws 90° / -45° / +45°/ +60° Cutting speed: 40/80 m/min. Isdpfx Amou Ekw Neioib

Condition: new, – Semi-automatic – Hydraulic – 2 speeds – Double mitre – Saw feed pressure hydraulically adjustable – Cooling – Saw blade 2730 x 27 x 0.9 mm – Foot control – Emergency stop Iijdeh Razfopfx Amieb – Documentation – 400 V

Condition: used, Year of construction: 2011, cutting diameter 260 mm saw band length 3340 x 27 x 0,9 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 380 x 260 mm band speed 37 / 74 m/min sawing motor 1,5 kW weight of the machine ca. 0,62 t dimensions of the machine ca. 1,7 x 1,4 x 1,3 m Miter band saw - Semi-automatic - Double miter Isdjwkvq Hspfx Amijib - Material detection during lowering - incl. 7 saw blades

Condition: new, Year of construction: 2026, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Iedpsudi Uzefx Amieib Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: new, empty load weight: 11,000 kg, overall weight: 68,000 kg, axle configuration: > 3 axles, suspension: air, Year of construction: 2025, Equipment: ABS, GVN Trailer 4 Axle Standart Lowbed        Iodpfeqxbapex Amieib Please get contact with us for more informaiton;   

Condition: new, 1 brand new semi-automatic horizontal band saw machine with double mitre Make: HUVEMA / Beka-Mak, Origin Türkiye Model: HU 230 DGH-4 / BMSY 230 DGH Technical data: Cutting range: Round 230 mm Rectangle 320 x 130 mm Square 230 mm Iiodevyidmepfx Amisb -45 ° Round 180 mm -45 ° Flat 230 x 100 mm -45 ° Square 150 mm +45 ° Round 210 mm +45 ° Flat 230 x 160 mm +45 ° Square 180 mm +60 ° Round 120 mm +60 ° Flat 120 x 100 mm +60 ° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Motor power coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Semi-automatic operation • Hydraulically clamping vice via foot pedal • Mitering on both sides using a swivel frame o The material to be sawn remains straight in space! o No turning of the material during miter cuts! o High efficiency with enormous time savings! • Preset precision stops 0°, 45° and 60° left and 45° right • Replaceable work table • Hydraulic vice, can be moved sideways to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is continuously regulated by a hydraulic cycle, after sawing the arm moves back up automatically and the vice opens • Coolant system • Chip brush • Pivoting control panel • Electric safety switch for blade tension and saw blade cover • Emergency stop switch • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: good (used), Year of construction: 2019, functionality: fully functional, Metal band saw EM BS 350 DGHF with base frame Iiedpfx Amjwxad Tjijb

Condition: used, Year of construction: 1998, cutting diameter 280 mm Iiodpjucgxzofx Amiob saw band length . mm cutting width . mm total power requirement . kW weight of the machine ca. 1 t dimensions of the machine ca. . m