Electronical crane scale mint condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,503 h, load capacity: 6,000 kg, lifting height: 3,400 mm, fuel type: diesel, construction height: 2,880 mm, empty load weight: 11,250 kg, TECHNICAL DETAILS Load capacity: 6,000 kg Lifting height: 3,400 mm Overall height: 2,880 mm MACHINE DETAILS Fuel type: Diesel Front tire size: 355/65-15 Rear tire size: 250-15 Guedpoza Dn Rjfx Ai Njc Dimensions & Weight Overall length: 3,450 mm Unladen weight: 11,250 kg Operating hours: 6,503 h EQUIPMENT Cabin 3rd valve Front work lights Rear work lights Heater Full cabin CE certificate

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring MACHINE 2 Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Guedeuddimspfx Ai Njc Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 6,892 h, load capacity: 5,000 kg, lifting height: 3,500 mm, construction height: 2,570 mm, empty load weight: 8,244 kg, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 3,500 mm Overall height: 2,570 mm MACHINE DETAILS Fuel type: electric Front tire size: 355/50 - 15 (25%) Rear tire size: 200/75 - 9 (25%) Dimensions & Weight Overall length: 3,050 mm Unladen weight: 8,244 kg Operating hours: 6,892 h Gjdjza Dnwjpfx Ai Njuc EQUIPMENT Front PTO Cabin Air conditioning 3rd valve 4th valve Front work lights Rear work lights Heater Full cab Impulse control Side shifter Fork positioner

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 4,429 h, fuel type: electric, battery capacity: 620 Ah, battery voltage: 80 V, battery weight: 1,558 kg, TECHNICAL DETAILS Fuel type: electric Front tire size: 21x8-9 (50%) Rear tire size: 7.00-12 (70%) MACHINE DETAILS Battery Gsdoza Dnkepfx Ai Neuc Nominal voltage: 80 V Nominal energy: 47.1 kWh Nominal capacity: 620 Ah Weight: 1,558 kg Cell type: 4 TPzS 620 Operating hours: 4,429 h

Year of construction: 1963, condition: ready for operation (used), Load: 18t, lifting height: 10,750mm, span: 23,000mm, weight: 35.1t, machine was regularly maintained and inspected. Gsdpjh I Edvefx Ai Njuc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 16,765 h, load capacity: 8,000 kg, lifting height: 5,450 mm, fuel type: gas, mast type: triplex, construction height: 3,210 mm, TECHNICAL DETAILS Load capacity: 8,000 kg Lifting height: 5,450 mm Overall height: 3,210 mm Guodpfx Aijza Dm To Nec MACHINE DETAILS Fuel type: Gas Mast type: Triplex Dimensions & Weight Overall length: 3,800 mm Unladen weight: 14,485 kg Front tire size: 4 x 8.25-15 (80%) Rear tire size: 315/70-15 (80%) Operating hours: 16,765 h EQUIPMENT Front PTO shaft Cabin 3rd valve 4th valve Front work lights Rear work lights Heater Full cabin Triple clamp Side shifter

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 72,700 h, machine/vehicle number: A1220A1012, laser hours: 34,021 h, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, working length: 3,000 mm, working width: 1,500 mm, Laser cutting system + LiftMaster + 4 Stopa storage towers No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Control system: Sinumerik 840D SL Working area: 3,000 x 1,500 x 115 mm Speed: max. 140 m/min Accuracy: 0.1 mm Laser: CO2 laser TruFlow 5000 with optimized standby mode Laser power: 5000 W Sheet thickness, steel: max. 25 mm Sheet thickness, stainless steel: max. 20 mm Sheet thickness, aluminum: max. 12 mm STOPA storage system with 4 towers Year of manufacture: 2006 Load capacity: 3 t Sheet format: 1,250 x 2,500 mm Storage capacity: 63 t Storage height: 3,800 mm Storage locations: 21 MACHINE DETAILS Operating hours: 72,700 / 34,021 h Length: 9,300 mm Width: 4,600 mm Height: 2,200 mm Weight: 12,000 kg Voltage: 400 V 50 Hz Connected load: 105 kVA EQUIPMENT Torque drive in combination with linear direct drives Enclosed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Position laser diode Spray system PierceLine FocusLine NitroLine Gjdpfjy U Nf Sox Ai Nsuc PlasmaLine ControlLine ContourLine FastLine FlyLine AdjustLine Microweld Production plan Fast re-production Automatic shutdown Low-maintenance turbo radial fan Laser control TASC Laser cutting head with 250 mm lens Universal cutting head quick-change system (UTI) with bus connection LensLine with condition monitoring CE marking Light curtains Multi-chamber extraction system Laser monitoring system Compact dust extraction system

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Gusdpfjfy T H Ijx Ai Noc Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: ready for operation (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC 530 , rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X-axis: 780 mm Travel range Y-axis: 560 mm Travel range Z-axis: 560 mm B-axis, infinitely adjustable: 150° (-120°/+30°) Guedpfx Aiozcqa Sj Nsc Rapid traverse rate (X / Y / Z): 50 m/min Feed rate: 20 - 15,000 mm/min Spindle speed (max.): 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool interface: SK 40 Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool positions: 120 Max. tool diameter: 80 mm Max. tool diameter with free adjacent tool pocket: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 Total power consumption: 64.2 kVA Dimensions & Weight Footprint: approx. 7.0 x 7.0 x 2.8 m Machine weight: approx. 12.0 t Operating Hours Operating hours: 39,256 h Power-on hours: 72,107 h EQUIPMENT Chip conveyor Coolant system High-pressure cooling 40 bar through-spindle coolant Paper band filter Pallet changer, 2 positions Tool breakage monitoring According to the seller, the spindle was presumably replaced. However, no service report is available to confirm this. The machine's data storage was renewed in January 2026. No CE declaration of conformity is available in DIN A4 or PDF format.

Condition: used, Year of construction: 2003, operating hours: 23,000 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller model: OSP-E100M, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time by the end of week 26 of 2026! TECHNICAL DETAILS Travel in X-axis: 1,000 mm Travel in Y-axis: 950 mm Travel in Z-axis: 1,000 mm Main spindle speed: 12,000 rpm Table width: 630 mm Table height: 630 mm NCB B-axis: 0.001 degrees MACHINE DETAILS Control system: OSP-E100M Dimensions (L x W x H): 6,500 x 3,460 x 3,280 mm Operating hours: approx. 23,000 h EQUIPMENT Gujdpozbamfofx Ai Noc 2 APC pallet changing systems 100 ATC tool changer SK50 with tool ID Coolant system Mayfran Consept Renishaw preparation (receiver) Tool breakage monitoring installed in the magazine (special development) An optional tool package with 230 tools is available for the machine for €5,000. The seller can offer dismantling, transport securing, removal and loading for an additional charge of €7,850.

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace Gsdpfxocmr D Hs Ai Njuc max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Condition: used, Year of construction: 2011, functionality: limited functionality, laser power: 6,000 W, laser source model: TruFlow 6000, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 6,000 W Laser source: TruFlow 6000 MACHINE DETAILS Connection power: 114 kVA Mains connection: 400 V Control voltage: 24 V Fusing: 200 A Compressed air connection: 6 - 14 bar Guodpozaqzkefx Ai Njc Package dimensions Cabinet: 2600 x 800 x 1200 mm Laser head: 1200 x 1200 x 1200 mm Laser: 3000 x 1600 x 2800 mm 800 x 800 x 2000 mm 1400 x 1000 x 2000 mm 2 x 1200 x 800 x 2200 mm Note: The machine's dongle is defective.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 14219, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 560 mm, spindle diameter: 75 mm, spindle speed (max.): 1,800 rpm, No minimum price – guaranteed sale to the highest bidder! With digital display of travel distances! TECHNICAL DETAILS Gusdpszaqxcefx Ai Njc X-axis: 1,250 mm Y-axis: 900 mm Z-axis (or W-axis): 560 mm Spindle diameter: 75 mm Spindle speeds: 18-1,800 rpm Spindle taper: SK-40 Table size: 950 mm x 950 mm MACHINE DETAILS Weight: 10,000 kg EQUIPMENT Accessories shown in the pictures, including tools, tool cabinets, and clamping devices.

Year of construction: 2025, condition: new, 1. Polyp (Grab) Capacity: optional 250, 450, 600 liters volume 2. Polyp (Grab) Rotation Angle: Infinite Guodpfxsfkvv Re Ai Njc 3. Polyp (Grab) Teeth Quantity : 5

Condition: ready for operation (used), functionality: fully functional, empty load weight: 12,300 kg, maximum load weight: 2,007 kg, DGUV certified until: 04/2027, Year of construction: 1980, TECHNICAL DETAILS Boom: 30 m Hook height: 34.2 m Load capacity at 15 m reach: 2,007 kg Load capacity at 18 m reach: 1,588 kg Load capacity at 21 m reach: 1,300 kg Load capacity at 25 m reach: 1,030 kg Load capacity at 28 m reach: 881 kg Load capacity at 30 m reach: 860 kg Hoisting rope diameter: 9.07 mm Trolley rope diameter: 6.8 mm Telescopic rope diameter: 12.6 mm MACHINE DETAILS Unladen weight: 12,300 kg Guodezaqv Iopfx Ai Njc EQUIPMENT Radio remote control External reference: 633