6000 L stainless steel tank (beer tank)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 700 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 500 mm Spindle speed: 1 - 18,000 rpm Tool holder: HSK-A63 Tool magazine capacity: 70 Tool-to-tool change time: 2.5 s Acceleration: 20 m/s² Travel speed: 120 m/min MACHINE DETAILS Number of pallets: 6 EQUIPMENT Lhodjzd R R Eopfx Al Ijh Integrated workpiece changer system High-dynamic 5-axis machining Weight-optimized kinematics Linear motor drives

Condition: good (used), Stainless steel tank 5000 L with mixer, cooling. In good condition Ljdpfx Alevr E N Nj Iehh They have a built-in pipe around the tank that can cool

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0000121172, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, controller model: KRC2, number of axes: 6, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 30 kg Reach: 2,033 mm Number of axes: 6 MACHINE DETAILS Control model: KRC2 Machine weight: 665 kg EQUIPMENT Robot arm KRC2 control cabinet Ljdpfx Alszcnv Ds Iohh Operating panel (KCP2) Cabling (except for one cable to the control unit) Dual gripper Profibus communication Note EXW: Dismantling and loading are to be arranged by the buyer.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 34, fuel tank capacity: 300 l, conveyor belt length: 6,900 mm, Only 200 operating hours! TECHNICAL DETAILS Undercarriage track: 400 mm with 3 grousers Rear belt: 6.9 m Shredding system: Size L (8 teeth) MACHINE DETAILS Additional hydraulic connection: 70 l/min Engine: Cat C7.1, 205 kW Fuel tank: 300 L Permissible total weight: 16,300 kg EQUIPMENT 24 V electrical control system Large radio remote control, complete Easy-to-maintain engine compartment with LED light Folding hopper with distance sensor and automatic control Hydraulically reversible fan wheel Audible start-up warning Lhodpfxszcd Aas Al Ieh Tracked undercarriage with 2 travel speeds Frame for overband magnet Rubber quick-change pads Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Watering system LED work lights Additional electric pump for operation when the engine is stopped

Condition: good (used), Qty 2 Linx Ink Jet Coders Models 7900 & 7300 In good working condition Lhjdpfskyumkox Al Ish Fully serviced In working condition

Condition: used, Year of construction: 2003, cutting height (max.): 320 mm, saw blade diameter: 750 mm, rotational speed (max.): 800 rpm, Equipment: CE marking, saw blade guard, TECHNICAL DETAILS Cutting height (max.): 320 mm Cutting height at 90°: 320 mm Saw blade diameter: 750 mm Saw blade tilt adjustment: 45° Rotational speed (max.): 800 rpm Rotational speed (min.): 650 rpm MACHINE DETAILS Input voltage: 400 V Input current: 29 A Input frequency: 50 Hz Height adjustment type: electric Table adjustment type: electric EQUIPMENT CE marking Variable speed control Saw blade guard Lodpjzc Hg Usfx Al Ijhh

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 5B0S000433, No minimum price – guaranteed sale to the highest bidder! The new price of the microscope was approximately €100,000! Further technical details can be found in the attached data sheet! TECHNICAL DETAILS Maximum magnification: x1000 Camera VHX-7100 Sensor size: 1/1.7 inch Sensor type: 12.22-megapixel CMOS sensor Total pixels (H x V): 4,168 × 3,062 Virtual pixels (H x V): 4,024 × 3,036 High speed (H x V): 2,048 × 1,536 High resolution, 4K mode OFF (H x V): 2,880 × 2,160 High resolution, 4K mode ON (H x V): 4,000 × 3,000 High resolution (H x V): 12,000 × 9,000 Electronic shutter speed: 1/30, 1/60, 1/120, 1/250, 1/500, 1/1,000, 1/2,000, 1/5,000, 1/9,000, 1/19,000 Supercharge shutter speed: 0.01-s steps from 0.03 to 4 s LCD monitor Size: 27-inch color LCD Screen size (H x V): 596.16 × 335.34 mm Pixel pitch (H x V): 0.15525 × 0.15525 mm Number of pixels (H x V): 3,840 × 2,160 Display colors: approx. 1.07 billion Viewing angle: ±89° horizontal, ±89° vertical VHX-S770E stand Travel range of the XY stage: ±50 mm Size of the XYθ stage (surface): 233 × 185 mm Speed of the motorized XY stage max.: 20 mm/s Travel range of the Z stage: 49 mm Load capacity: 5 kg Weight: 25.3 kg MACHINE DETAILS Connection: Digital Dimensions & Weight Dimensions without protruding parts (W x H x D): 635 x 450 x 132 mm Weight of the control unit: 10.8 kg EQUIPMENT KEYENCE VHX-X1 microscope unit Control console VHX-AX1D Processing unit OP-88885 Camera unit VHX-7100 Objective lens VH-Z00T High-performance objective lens VH-Z100 Motorized revolving head Motorized precision stand VHX-S770E Lhedpfx Aozb Eixjl Ieh Large motorized XY stage Software module VHX-H6M Ring light and illumination adapter OP-88164 3D profile measurement Manufacturer documentation Original accessories

Condition: excellent (used), Year of construction: 2008, MESPACK type H-180-FE powdered sugar bagging machine Year 2008 Filling in 2 stages 1 filler fills half, 2 filler fills other half Capacity: 50 bags per minute. Cartoning machine OTOR SYSTEMS type FCR 214 Capacity: 5 cartons of 10 bags per minute Year 2011 Ljdpfxetn Rars Al Iohh

Condition: excellent (used), Year of construction: 2021, operating hours: 11,514 h, functionality: fully functional, machine/vehicle number: 20210202, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 640, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 670 mm Travel Y-axis: 820 mm Travel Z-axis: 600 mm Spindle speed (min.): 18,000 rpm Spindle operating hours: 11,514 h Lhedpfx Aljzb A Eks Ish Coolant supply: 40 bar MACHINE DETAILS Apparent power rating: 90 kVA Control manufacturer: Heidenhain Control model: TNC 640 Total weight: 20,000 kg Input voltage: 400 V Full load current: 125 A Max. current load: 200 A Short-circuit resistance: 25 kA Voltage: 400.50 V/Hz Net weight: 20,000 kg Machine number: 20210202 EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2014, operating hours: 65,000 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, workpiece weight (max.): 200 kg, Machine with SheetMaster TECHNICAL DETAILS Travel range of the X-axis during punching: 3,050 mm Travel range of the Y-axis during punching: 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 200 kg Punching force: max. 220 kN Stroke rates Punching stroke rate at 1 mm: 1,350 min⁻¹ Marking stroke rate: 3,000 min⁻¹ Part removal Part size, part flap during punching: max. 500 x 500 mm Part size, fixed chute during punching with a moving table: max. 80 x 50 mm MACHINE DETAILS Lsdpfsy U Ut Iox Al Iohh Operating hours: 65,000 h Space requirement: 7,395 x 6,540 x 2,072 mm Power consumption, auto-shutdown active: 0.5 kW Power consumption during production: 9.5 kW

Condition: used, Item: AV-11841-Vertical40m3tank Used vertical tanks, capacity 40.000L Exterior dimensions: Dia Ø 3200/3400 mm Total H 9600 mm incl. gear. Cylinder height: 7200 mm. Vertical stainless steel tanks - 3 pcs. Lodpsi E Abiefx Al Iohh Insulated with 100 mm rockwool completed with flat plate. Conical bottom 35 degrees with 4" outlet. Klöffer top with manhole. Powerful top mounted agitator. 37 kw agitator. AISI 316.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P1065-22-A-01, controller model: Siemens SPS S7, wall material: stainless steel, cooling capacity: 180 kW (244.73 HP), nominal flow rate: 16,500 m³/h, product height (max.): 150 mm, Due to a rescheduling of a site visit, the auction end date has been postponed to Thursday, June 25, 2026! The new price of the machine was €650,000! TECHNICAL DETAILS Capacity (for rolls weighing approximately 60g): 10,000 - 15,000 pieces/hour Layout: 180° layout Levels: 17.5 Free product height: approx. 150 mm Level spacing: approx. 216 mm Total cooling capacity: approx. 180 kW Total power consumption: approx. 70 kW Power connection: 400 / 230 V, 3-phase, 50 Hz Refrigerant: R717 Refrigerant supply: NH3 pump system Ambient temperature: above 10 °C Belt system Belt guidance: from bottom to top Infeed height: approx. 8,500 mm / 500 mm outside the cell wall Outfeed height: approx. 4,728 mm / 400 mm outside the cell wall Belt type: Stainless steel wire belt with side edges on both sides Belt mesh: 12.7 x 27.43 mm Wire thickness: 1.4 mm Belt width: approx. 762 mm Usable belt width: approx. 700 mm Usable belt length: approx. 300 m Belt length including infeed and outfeed: approx. 320 m Housing Housing length: approx. 8,700 mm Housing width: approx. 6,920 mm Housing height: approx. 5,200 mm Insulation thickness: approx. 140 mm Plastic elements: approx. 2,600 mm Width of operator walkway: approx. 1,500 mm Evaporators Number of evaporators: 4 units Evaporator capacity: approx. 60 kW each Air flow: vertically drawing, 45° upwards Air temperature: approx. -32 °C Evaporation temperature: approx. -40 °C Defrosting: manually with air or hot gas Evaporator surface area: 311 m² each Air volume: 16,500 m³/h each Fans: 4 units per evaporator Fan power: approx. 7.5 kW Air ring heater: 4 x 0.72 kW Defrosting interval: sequential Heater in the pan: hot gas Control and switch cabinet Control system: Siemens PLC S7 CPU: 1512SP-PN Touchscreen: 12" Operating panel: TP-1200 Comfort Panel Interface to the refrigeration unit: 0 - 10 V Main drive: 1 x approx. 2.2 kW Overdrive: approx. 1.1 kW Switch cabinet: stainless steel on a stainless steel frame Temperature display: min. 1x per day Operating hour counter: available Belt cleaning: freely programmable Alarm light: optical, green / yellow / red Ljdezardtepfx Al Iehh Construction Material: Stainless steel 1.4301 Conveyor belt: Stainless steel, 762 mm Side guide for conveyor belt: approx. 25 mm Number of outlets: 2 units Product guides: 2 units EQUIPMENT Stainless steel construction Insulated housing with 140 mm insulation thickness Stainless steel belt with side edges on both sides Belt path from bottom to top Internal arrangement of the single-tower spiral Infeed at the bottom Outfeed at the top Hygienic design Food-grade plastics Easy-to-maintain accessibility SEW main drive with Danfoss frequency converter SEW overdrive with Danfoss frequency converter Motors in energy efficiency class IE3 Siemens PLC S7 with CPU 1512SP-PN TP-1200 Comfort Panel Touchscreen display Variable belt speed Operating hour counter Fault reporting system with traffic light and signal horn Emergency stop switch and safety sensors Height and belt control on each level Stainless steel cabinet on stainless steel frame Freezer LED lighting controlled via the touch panel Welded stainless steel base pan with slope and drainage Under-freezing protection heater with a reserve circuit Floor temperature sensor with reserve sensor 4 separate evaporator units, each with one fan Evaporator pipes made of stainless steel Evaporator housing made of stainless steel Evaporator pans made of stainless steel Hot gas defrosting made of stainless steel in the unit Sequent

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 351.10.001.16, functionality: fully functional, workpiece length (max.): 3,000 mm, workpiece width (max.): 920 mm, workpiece height (max.): 50 mm, drilling depth: 55 mm, TECHNICAL DETAILS Maximum horizontal drilling depth: 30 mm Maximum vertical drilling depth: 55 mm Horizontal spindles: 6 Vertical spindles: 9 Spacing between horizontal spindles: 32 mm Spacing between vertical spindles: 32 mm Maximum diameter of horizontal spindles: 15 mm Maximum diameter of vertical spindles: 8 x 15 mm, 1 x 35 mm Workpiece dimensions, X-axis: 280 - 3,000 mm Lsdpfxozcdkwe Al Iohh Workpiece dimensions, Y-axis: 180 - 920 mm Workpiece dimensions, Z-axis: 10 - 50 mm Speed, X-axis: 25 m/min Speed, Y-axis: 25 m/min Speed, Z-axis: 15 m/min Motor power, drilling head: 1.5 kW Speed, drilling head: 3,600 rpm Speed, circular saw unit: 9,000 rpm Speed, milling spindle: 24,000 rpm Diameter of circular saw blade: max. 100 mm MACHINE DETAILS Operating/ambient temperature: 15–40 °C Humidity: max. 90 % at 20 °C Operating pressure: 6–8 bar Nominal compressed air consumption: 60 l/min Air consumption: 1,650 m³/h Diameter of compressed air supply: 5/8" Inner diameter: 16 mm Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,605 x 1,950 mm Weight: 850 kg Operating hours (estimated): approx. 800 h EQUIPMENT Additional support roller tables

Condition: used, mileage: 93,103 km, power: 70 kW (95.17 HP), first registration: 10/2014, fuel type: diesel, empty load weight: 2,570 kg, maximum load weight: 930 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, fuel: diesel, CO₂ emissions: 259 g/km, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2014, construction height: 2,700 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, The Mercedes-Benz Sprinter 310 CDI Maxi Euro-5 offers a reliable transport solution with a robust box body. This used model, first registered in October 2014, has a mileage of 93,103 km. Powered by a 2,143 cc diesel engine with an output of 70 kW (95 hp), the Sprinter is equipped with an automatic transmission and rear-wheel drive. With an average combined fuel consumption of 9.8 l/100 km, it complies with the Euro 5 emissions standard. The Sprinter is characterized by its spacious design, with dimensions of 7,057 mm in length, 2,100 mm in width, and 2,700 mm in height, a wheelbase of 4,325 mm, and a permissible gross vehicle weight of 3,500 kg. It is painted yellow and has two doors and seats. Additional features include a camera system and storage modules in the trunk, making it perfect for commercial use. Lhjdpfxeuillgo Al Ijh The Category 4 (Green) environmental sticker allows access to low-emission zones. Viewings are possible without prior appointment, and a registration service is also offered. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: J0124, travel distance X-axis: 1,800 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain iTNC 426, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,800 mm Travel range Y-axis: 850 mm Travel range Z-axis: 750 mm Spindle nose to table distance range: 200 mm - 950 mm Spindle center to column distance: 920 mm Table dimensions X: 2,000 mm Table dimensions Y: 800 mm Max. table load: 2,200 kg Tool interface: SK50 Magazine capacity: 30 Spindle speed: 6,000 rpm Feed rate: 5 m/min Rapid traverse: 12 m/min Lhjdpezdpqwjfx Al Ish MACHINE DETAILS Control system: Heidenhain iTNC 426 Dimensions & Weight Dimensions (L x W x H): approx. 5,700 x 3,850 x 3,350 mm Weight: approx. 16,500 kg Operating Hours Total operating hours: approx. 51,000 h Spindle operating hours: approx. 26,000 h EQUIPMENT 4th axis installed as a rotary table Documentation/Manual Spindle speed infinitely adjustable Chip conveyor Coolant system Vices