Tow Tractor

Linde P250SWB

Year of construction: 2026, condition: new, NEW MACHINES We have a large selection of new pallet inverters and pallet changers, both mobile and stationary models. We have machines for all types of products that need to be turned or replaced pallets. Semi-automatic or fully automatic. We deliver and install throughout the EU. Laodehmfctjpfx Ampea

Condition: used, LINDE Electric Forklift Type E25L-01 Serial No. H2X387D01930 Year of Manufacture 2013 Load Capacity 2500 kg Lift Height 4700 mm Fork Length 1600 mm Fork Carriage Width 1150 mm Overall Height 2200 mm Operating Voltage 80 Volts - Triplex clear-view mast with 1500 mm free lift - 2x auxiliary hydraulics on the fork carriage for attachments - HOPPECKE Type 5HPZS 575 battery pack, 80 Volt 575 AH with EUW (new battery from 2019) - INDATRON Type D automatic charger, 80 Volt / 80 Ampere with EUW - 4-wheel super-elastic, solid rubber tires, front 225/75-10, rear 200/50-10 - Driver's cabin with Heating Laodpfx Aod Rmx Njmpoa - Hydraulic auxiliary steering - 2 LED work lights at the front - 1 LED work light at the rear - 1 LED BlueSpott at the rear - 15,995 operating hours according to the hour meter - New TÜV and UVV inspection Length without forks: 2,500 mm Overall width: 1,150 mm Weight: approx. 4,700 kg Good condition

Condition: used, Dematic conveyor system Roller conveyors can be individually planned RA1287 We plan your individual conveyor system from used goods! The Dematic roller conveyors are in good (used) condition. The roller conveyors are available in different versions, e.g. as: Gravity conveyors - Roller conveyors without drive Roller conveyors - roller conveyors and roller curves with drive Accumulation conveyors with RSPN without RSPN (pneumatic space brakes) Available conveyor lengths (FL): 3000 mm, 2000 mm, 1500 mm, 1000 mm Available nominal/outer width (NB): 600 mm, 500 mm, 400 mm Optionally available e.g: Motors with and without frequency inverter from SEW Eurodrive / Movimot Supports Side guides Further information Manufacturer: Dematic Type: Roller conveyor Lajdpfok Aa R Iex Ampea Year of manufacture: unknown Condition: good (used) Roller width (RB): 540 mm 440 mm 340 mm Roller pitch: 62.5-125 mm variable (for roller curves the smallest pitch is 56 mm) Drive types: Head and center drive Load weight: up to 30 kg Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: good (used), Year of construction: 2008, Professional packaging machine from a renowned European manufacturer: -Suitable for adhesive tape width up to 50 mm. -Maximum carton dimensions according to manufacturer's specifications approx.: width 500 mm x height 500 mm; unlimited length. Double-sided sealing of the packages at the top and bottom. -Different carton formats are adjusted in height and width using cranks. -Transport speed approx. 20 m / min. Output approx. 800 cartons per hour. Lodpfx Ajtndq Iompeaa -Working height of the machine is infinitely adjustable. The machine can be moved and locked using foot rollers. -Documentation consisting of operating instructions, spare parts lists and circuit diagrams.

Condition: new, Year of construction: 2023, functionality: fully functional, Rotary arm wrappers are state-of-the-art pallet and stretch film wrapping machines in which a powerful rotary arm combined with a reliable pre-stretch system enables precise wrapping of the pallets. This advanced technology allows the packaged goods to remain unchanged during the wrapping process. This makes rotary arm wrappers particularly suitable for pallets with light or unstable goods and for loads that are difficult to maneuver. - Maximum product height: 2,000 mm Laodpfx Aor Nc Spempja - Maximum pallet dimensions: 1,200x1,200mm - Minimum weight: 45kg

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. •Robust design with steelframe, eyebolts etc. •Vital parts can easily be maintained and exchanged. Lsdpfx Aokw Ukuompeaa •Large air inlet grills and filters. •Can be built into containers for protection. •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Condition: good (used), Year of construction: 1995, functionality: fully functional, roll diameter: 80 mm, roll width: 200 mm, total width: 250 mm, total height: 400 mm, total length: 280,000 mm, without drive, - 65 units with 3.00 m length, roller pitch 100 mm additionally: - 7 roller conveyors: 6.00 x 0.50 x 0.61 m, roller diameter: 50 mm; width: 250 mm Laodpfx Aewc Akqompsa

Condition: good (used), Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires, complete wheels -Manufacturer: Continental, tire IC70 with rim -Tire size: 7.00 R 12 16 PR / 7.00 R 12 136 A5 -Bolt circle: Ø 170 x 18 mm Laodpfx Asw Slmljmpja -Recess: Ø 138 mm -Dimensions: Ø 650 x 190 mm -Weight: 38 kg

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 3,000 W, travel distance X-axis: 1,524 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 100 mm, EC3 Single Platform Fiber Laser Cutting Machine The EC series is an economical single-platform laser cutting machine independently developed and produced by Baison Laser, suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, and brass. It meets various cutting needs for most of sheet metals. Ljdpfxsxfi Irj Ampjaa TECHNICAL SPECIFICATIONS Features • Compact and complete CE electrical panel with safety relay on the back side of the machine equipped with AC unit, protected from dust. • Operating panel with large LCD display and movable arm mount, easy to use. • Loading weight up to 1000kg • Auto-focus laser head with automatic detection • Industial components with high durability • Both sides access for dust trolleys • Emergency botton on remote control Processing Format & Working Range Processing Area (L×W): 3.050 x 1.530 mm X-axis Stroke: 1.524 mm Y-axis Stroke: 3.050 mm Z-axis Stroke: 100 mm Max. loading weight: 1.000 kg Accuracy X/Y Axis Positioning Accuracy: ±0.03 mm/m X/Y Axis Repositioning Accuracy: ±0.03 mm Speed Max. Moving Speed: 100 m/min Max. Acceleration Speed: 1.0 G Power Parameters Power Supply: 12.3kW/32A (380V/50Hz/3Phases) Protection Grade: IP54 Weight & Size Machine Size: 4.530 * 2.280 * 1.310 mm Machine Weight: 2.000 kg

Condition: used, Year of construction: 2005, operating hours: 6,197 h, fuel type: electric, total height: 1,850 mm, total length: 3,000 mm, total width: 1,300 mm, color: other, Empty weight: 364 kg - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: G1X127S00246 - Operating hours: 6197 - Towing capacity: 25000kg - Options: Heating, Work lights, Full cabin - Drive: Electric - Brand/Type: 40X3PZS465 - Capacity: 465Ah - Battery voltage: 80V - Transport dimensions: 3000mm x 1300mm x 1850mm (l x w x h) Lsdpfxswrnlfo Ampjaa - Transport weight [kg]: 364kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom