Spare parts

Laconda

Year of construction: 1999, condition: used, machine/vehicle number: 6572818, Jogger Serial Number: 6572818 Kdjdpfxog Stklj Ampjk 800 x 1340 mm

Year of construction: 1988, condition: used, Built in 1988 Kdjdpfx Aoc Rdz Njmpjk Size max 720 x 870 mm Feeding height max 165 mm Feeding height 30 mm Table height 860 - 950 mm Equipment • air table • air jets in table

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, MACHINE BUILT 2009 / COMPLETELY REFURBISHED 2025 Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Type - MKW RAPID UT - System Belt conveyor table 32- Number of stations B3 - Format 35 x 50 cm GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 32stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 50 cm - High-Pile version with max. 70 cm stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment via electrical clutches - Foldable transport fingers - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Blown air for accurate sheet layering - Adjustable sheet layering - Electronic machine control by Industry-PC system - High quality color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PolyC. - Ejector unit inclusive additional station at the delivery AW 3 incl. (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated ASS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - Hand feeding station at left side HV 3 (incl. automatic station-control in case of operating error) 1 Prepiling-System for all stations Type MKW VS 3 - Mobile stacking pallets Kedjxdy R Ispfx Ampodk - Format up to 35 x 50 cm - 30 units fixed installation in front of the machine - 2 mobile stations in front of the collator (15+2+15) - 2 mobile pallets per station inclusive 1 High-Pile Non-Stop Delivery Unit Type MKW RAPID TD-3 - Automatic high-pile delivery up to 30 cm piling of sets - Format up to 35 x 50 cm - Staggered delivery of sets - Stacking function adjustable: straight stacking or offset function - Automatic delivery onto buffer belt - Buffer belt lenght approx 2,00 m - Counter function for pile height - Text display for operation and monitoring Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Validity of offer Subject to prior sales Detailed offer on request

Condition: used, Year of construction: 1988, The Stahl T49/4.KB-F.2, manufactured in 1988, is a machine equipped with four pockets and a flat stack feeder. It features a single cross-cutting unit, enhancing its functionality. This model has a format of 490 mm and is currently located in Germany, available in the Printshop. Format: 490 mm Equipment: 4 buckle plates 1 Knife vertical pile feeder Ksdpfxjv Di Sxo Ampedk

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: SN070, paper weight (min.): 135 g/m², paper weight (max.): 450 g/m², paper width (min.): 210 mm, paper width (max.): 364 mm, paper height (min.): 297 mm, paper height (max.): 750 mm, total length: 4,020 mm, total width: 1,200 mm, total height: 1,800 mm, space requirement length: 4,020 mm, space requirement width: 1,200 mm, space requirement height: 1,800 mm, type of input current: AC, input current: 40 A, input voltage: 240 V, Equipment: documentation/manual, We are offering this used MGI JETVARNISH 3D One digital printing machine, year of manufacture 2019. Voltage: 220–240 V Frequency: 50–60 Hz Short-circuit current rating (SCCR): 10 kA Current: 2×20 A Model: JETVARNISH 3D One Serial number: JVD1-070 Date of manufacture: 12.2019 Year of construction: 2019 Note: We do not provide any warranty for this machine, it is sold as shown in the pictures provided. The machine was stored packaged in a warehouse for two years due to restructuring. Configuration: KONICA MINOLTA PRINTHEADS - Exclusive MGI inkjet technology - Line widths from 0.5 mm possible INTEGRATED INLINE DRYING - On-the-fly drying and curing via integrated LED UV dryers - No additional drying time required - Low energy consumption PAPER DELIVERY - Automatic stacking of prints onto pallets - Minimum format A4 - Maximum format 36.4 x 75 cm DIGITAL ADVANTAGES - Ideal for profitable small and medium print runs - Fast setup - No plates or screens required - Digital varnish form (tiff) required as 5th color - Wide range of substrates possible VARNISHING ON DIGITAL AND OFFSET PRINT SHEETS - Spot varnish directly onto toner (no lamination required for most toners) - Varnishing over offset prints or laminated sheets - Accurate registration by AIS scanner, no register marks needed - Fast and easy digital production - Maximum varnishable area per sheet: 35 x 74 cm VARIABLE VARNISH THICKNESS - Adjustable to individual customer requirements - Maximum 3D effect: 116 μm - Minimum thickness (on laminated surfaces): 21 μm - Minimum thickness (directly on toner): 21 μm SOFTWARE SUITE - On-the-fly job management - Reprint functionality - Image editor - Library of different patterns - Intuitive operation - Time and cost saving OPTICAL SHEET CONTROL - Artificial Intelligence Smart Scanner - Precise registration - Sheet skew and misalignment correction - 300 individual reference points per sheet - Individual correction for each sheet - No marks needed (if contrast is sufficient) - Fast, straightforward setup MEDIA HANDLING - Paper weights from 135 gsm up to 450 gsm - UV spot varnishing directly on digital prints without prior - Full surface varnishing or lamination (not with all toners) ENVIRONMENTALLY FRIENDLY - Varnish in closed loop system - No cleaning required between jobs - No wastage between jobs - Reduced paper, varnish, and energy consumption DIMENSIONS - 4.02 x 1.2 x 1.8 m (L x W x H) - 1 meter clearance required on all four sides - Weight approx. 1,200 kg ELECTRICAL DATA - 7.5 kW (32 A), operating temperature: 18 to 30°C - Relative humidity: 30 to 50% (non-condensing) Included: - Corona charging unit - Required for processing prints from various toner systems - VDP barcode scanner If you have any questions or require further information, please feel free to send us a message or call us. Note: We do not provide any warranty for this machine. Kdedeyypcnopfx Ampok

Condition: used, Year of construction: 1990, machine/vehicle number: 538, Doppelkopfheftmaschine für Broschüren - Twin-headed Stapler for Booklets - Pads Winterling KM17Year 1990 - Serial-No. 538 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Ksdpjh Axpwjfx Ampjdk Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, functionality: fully functional, Year of construction: 2022, operating hours: 5 h, power: 2 kW (2.72 HP), load capacity: 136 kg, lifting height: 10,900 mm, lifting power: 136 kg/m, platform length: 1,305 mm, platform width: 600 mm, overall weight: 1,895 kg, empty load weight: 1,895 kg, transport length: 4,316 mm, transport width: 1,100 mm, transport height: 1,948 mm, fuel type: electric, tire size: Rubberen rupsbanden (non-marking), tire condition: 100 %, wheelbase: 1,400 mm, ground clearance: 180 mm, color: red, Equipment: UVV, tilting carriage, === KEY SPECIFICATIONS === Year: 2022 Operating hours: 5 h Working height: 12.9 m Max. horizontal outreach: n/a (vertical lift) Platform capacity: 136 kg (1 person + toolbox) Kodpfxsxb Svdo Ampjdk Platform dimensions (L × W): 1335 × 690 mm Turret rotation: 360° (non-continuous) Basket rotation: No Boom type: Vertical telescopic Jib: Yes (articulating jib ± 89°) Power source: Electric (Lithium-ion battery pack) Drive system: Tracked undercarriage (non-marking rubber tracks) Stabilisers: Yes (automatic levelling – IIIS system) Motor manufacturer: Hinowa electric drive Emission class: Zero emission Weight: 1,895 kg CE certified: Yes === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history. CE certified with full technical documentation. Zero-emission electric drive – ideal for indoor and urban use. Compact and lightweight design with removable control panel and automatic levelling. Eligible for sustainability subsidies in several EU countries. === CONDITION === Machine in excellent condition with only 5 operating hours. Fully inspected, maintained, and tested by certified technicians. Available for immediate delivery or inspection on site. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price: €34,750 (EXW, excl. VAT) === DESCRIPTION === The Hinowa TC13N is a compact lithium-ion powered tracked lift offering 12.9 m working height and 136 kg capacity for one operator and tools. Equipped with non-marking tracks, automatic stabilisation (IIIS system), remote control, and “Go Home” function for easy retraction. The removable platform control panel allows operation while walking alongside the machine. Basket can be detached in under one minute for transport or narrow access. A reliable, zero-emission spider lift – perfect for maintenance, interior work, and city environments. Eligible for green energy and environmental subsidies across multiple EU countries. Ready for immediate use from stock in Sittard. === DELIVERY === Crane loading available on request. Flexible global transport handled by the Colle Rental & Sales logistics team.