Crane

KWB KRAAN/CRANE/GRUE/KRAN - KENNIS 16 TON/M(3xhydr.)

Condition: new, Year of construction: 2026, SPIRAL DUCT PRODUCTION MACHINE Metformer MTF 1602 TUBEFORMER Designed for the production of round SPIRO-type ducts. The produced duct complies with DIN EN 12237, BS, and Eurovent standards. Features: Coil decoiler with vertically adjustable brake Forming strips for duct production Burr-free high-speed cutting with circular cutting blades LCD touchscreen control Automatic lubrication system Automatic cutting during duct production Iiedpfxewa Skhe Am Isa Production reporting system (daily-weekly-monthly output) Automatic error detection Technical Data: Diameter range: 80–1600 mm Thickness range: Galvanized steel: 0.4–1.2 mm Stainless steel: 0.4–0.7 mm Aluminum: 0.4–1.3 mm Strip width: For 0.4–1.0 mm thickness: 137 mm For 1.1–1.3 mm thickness: 140 mm Production speed: 60 m/min Motor power: 11.25 kW Beading: Smooth, single or double Lock: External lock Cutting system: Circular cutting system Weight: 2900 kg Machine dimensions: 1900 × 2050 × 1500 mm Decoiler dimensions: 1780 × 1130 × 1250 mm Table dimensions: up to 2700 × 950 × 1200 mm Operating Environment: Power supply: 3-phase, 380V, 50Hz Clean surroundings Maximum ambient temperature: 40°C Minimum ambient temperature: -5°C Humidity: 55–85% Altitude:

Condition: new, Year of construction: 2025, NEW Snap lock roofing panel roll forming machine SL-1 Snap lock roofing panel roll forming machine SL-1 is designed and manufactured by our company as one of the flagman equipment for metal roofing panels production. Following machine makes standing seam roofing panels with self-closing lock on sides (snap lock). The main advantage of such lock system is the easy way of installation: to connect two panels with each other you just need to cover bottom part with top part and press it with some force, you will hear specific click noise at this very moment. That is why name of system is self-closing lock one. Comparing to standard standing seam roofing panels with mechanical lock which you need to close with special tools or equipment, snap lock panels are much easier to install and don’t require additional expensive devices for work. To fix panels at the roof frame you can use standard self-tapping screws, to make it possible, while rolling machine makes special fixation holes on one side of roofing panels. Such simple product design also helps to save costs and make installation process easier, not spending money on clips purchasing, comparing to the standard standing seam metal roofing with mechanical lock installation. So standing seam roofing with snap lock is easier to install, does not require high skilled employees and cut expenses for additional machines purchases. Total high of panels - 31mm As per order, we can also make machine for 26mm panels high. Machine has 10 pairs of forming rolls. One of the rolls has special punching parts so can cut fixation holes at roofing panel for further installation operations. Cutting tools are made from tools steel with heating and polishing, so have longtime working period. Maximum metal width can be 700mm, minimum 250mm. Snap lock roofing panel roll forming machine SL-1 is width easy adjustable one, so to adjust machine from one panel width to another you just need to rotate special handle. Rolling length – unlimited Rolling speed (m/min.): about 7 As extra options, you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; Ijdpfx Asiuz T Ijm Isia As per customer preferences snap lock roll forming machine can be equipped with automatization system and electric shears for panels cutting. Standard supply set of self-closing lock roll former machine SL-1 includes safety covers to protect working parts of machine from foreign objects. Snap lock machine can work with various types of metal: galvanized steel, copper, aluminum, color coated metal, etc.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. Iiedpfxexghngs Am Ija These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1, overall weight: 4 kg, Downspout Pipe Production Line Strip thickness: 0.6 - 0.7 mm Material quality: Steel and Pre-painted Isdpfx Aewvhnhjm Ijia Product diameter: Ø 100 mm ( 75, 87, 111,120 mm optional dimention) Production Line included: Double Head Decoiler: 4+4 tons, Roll Forming Machine casstte type ( with extra cassettes ) Hydraulic Cutting Unit.

Condition: good (used), In good technical condition and fully operational. Manufacturer: Bud Masz M. Stachlewski Steel thickness – 0.5-1 mm. Profile height: 40 mm. Entry width: 1250 mm. Overall width: 944 mm. Effective width: 915 mm. Min./max. length at a thickness of 0.5 lm/12 lm starting from a thickness of 0.75 mm Iodpex Tf Hcjfx Am Isia Accessories, auxiliaries: screws, sealing tapes, profiled gaskets, anti-condensation treatment, light-transmitting profiles

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, Thalmann THAKO 30 Working width: 8.20 m Bending capacity: 3.0 mm Iedeyl Tvuepfx Am Isia Year of manufacture: 2010 Touchscreen NEW

Condition: used, Year of construction: 2010, functionality: fully functional, sheet thickness steel (max.): 1 mm, number of blades: 5, working width: 1,250 mm, number of feed rollers: 2, FORSTNER MST 1250 Longitudinal Slitting and Sheet Cutting Machine The machine is in very good condition and fully operational. Designed for longitudinal slitting and cutting into sheets. It is currently connected - can be tested on site. Longitudinal slitting into 6 strips (5 pairs of knives), with the option to mount up to 7 pairs. Control – Siemens SIMATIC touchscreen panel. Full documentation (PDF) included. Specifications: Model: FORSTNER MST 1250 Made in: Austria Year: 2010 Working width: 1250 mm Thickness: up to 1.0 mm Slitting knives: 5 pairs Shearing: circular shears Iodpfx Asx R Sk Nem Ijia Controller: Siemens SIMATIC panel If you have any further questions, we will be happy to answer.

Condition: good (used), Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Iiedpjuiwqhefx Am Iea Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Condition: used, mileage: 456,492 km, power: 125 kW (169.95 HP), first registration: 05/2000, fuel type: diesel, overall weight: 7,490 kg, color: green, gearing type: mechanical, number of seats: 2, Equipment: crane, * Remote control * 28 meters lifting height * Max load capacity : 500Kg * Klaas superstructure Iisdpfx Amor A Adce Isa * Hatz diesel engine

Condition: good (used), Year of construction: 2001, In good technical condition and fully operational. Manufacturer: Rollsett Machine Oy Finland. Year of manufacture: 2001. Profile height: 18 mm. Entry width: 1,250 mm. Overall width: 1,146 mm; 1,166 mm. Construction width: 1,100 mm. Min./max. length: 0.5 lm/8 lm at a thickness of 0.50 mm. Accessories, aids: screws, sealing tapes, profiled seals, anti-condensation treatment, light profiles. Iisdpfex Tf Itsx Am Ija