Connector housings

Komax Zeta 633/654

Condition: new, Year of construction: 2025, Seam welding Ijdpfxsh Nu A Ns Aa Ioic

Condition: ready for operation (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, type of input current: AC, laser power: 700 W, power: 3 kW (4.08 HP), Equipment: cooling unit, cw fiber laser with 750 watts as a stand-alone system or for integration into machines and systems. Due to its high output power, this water-cooled laser is particularly suitable for tasks where a lot of heat is required in the workpiece. This includes, for example, welding metals or plastics, cutting, material removal or structuring. The optional use of a 2D galvo scanner means that the laser beam can also be guided over the workpiece using software. The laser can be modulated digitally and analogue (power setting) and can also be controlled and monitored using control software. The images show a setup with a galvo scanner. The system can also be optionally equipped with a welding head or cutting head. Laser class 1 can also be achieved by installing side walls and a front door with a laser protection window (all available). The work area can be adjusted in height using an electrically controlled Z axis. Iijdjph U Anjpfx Aa Iec The laser system is prepared for integration into a higher-level system, but can also be used as a stand-alone system. In the event of integration, interfaces for interlock, emergency stop, external laser control, etc. are available. Individual components of the system can also be integrated into a system at the customer's site. We are happy to support the customer after consultation and according to their specifications. Some technical data: - maximum 700 watts optical output power - wavelength: 1080 [nm] - power consumption (without cooler): < 3,000 watts - supply: single-phase; 230 VAC / 50 Hz - analog modulation (can be used to adjust power, among other things) - digital modulation up to 20 kHz

Condition: ready for operation (used), Year of construction: 2020, Suitable for marking cans, speed: 1500 characters/s, line speed: 400m/min, operating system: Windows CE, marking field: 58x58-452x572mm, throughput: 150 pieces/min, wavelength: 10.6µm, can diameter: 99/127/153mm, can height: 123-216mm, length: 776mm, width: 140mm, height: 140mm, weight: 22kg. The device is still in its original packaging, with documentation, an on-site inspection is possible. Iedpfxourwx Eo Aa Ieic

Year of construction: 2018, condition: ready for operation (used), Number of heating cartridges: 24, heating cartridge average and length: 12.5mm/200mm, power: 630W, 230V, including resistance thermometer type PT100, heating time to 350°: 40min. Dimensions X/Y/Z: 1900mm/2100mm/3040mm, weight: approx. 2200kg. Documentation available. Iiodpfx Astp Nacea Isc

Year of construction: 2009, condition: ready for operation (used), Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Telsonic MPS-4, connected load: 4000W, length: 459mm, width: 854mm, height: 1315mm, weight: 130kg. With SICK C4000 safety light curtains, cabin and documentation. On-site inspection is possible. Iiodpfx Aajuy T I Hs Ijc

Year of construction: 2010, condition: ready for operation (used), An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible. Isdpfsuy T Ndex Aa Ioic

Year of construction: 2014, condition: ready for operation (used), An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible. Iiedpfx Aaouy T Nqj Isc

Year of construction: 2010, condition: ready for operation (used), A complete Schleuniger cable processing system for processing large cables and wires is available. 1) Cutting and stripping machine Schleuniger MegaStrip 9600, year of manufacture: 2008, cable cross-section range: 0.5mm²-100mm², max. conductor cross-section: 240mm², max. cable diameter: 25.4mm, max. stripping length front/right: 300mm, max. stripping length rear/left: 150mm, max. feed: 2m/s, belt width: 30mm, blade pairs: 4, machine dimensions X/Y/Z: approx. 900mm/800mm/1300mm, weight: approx. 320kg. 2) Rotary cutting unit Schleuniger RU 9600, year of manufacture: 2007, max. opening: 27mm, number of blades: 2, blade system: rotating diametrical blades, max. cutting depth: 6mm, clamping jaws: 4. 3) Cable payoff and feeding unit Schleuniger PF 4600/406.00, year of manufacture: 2010, max. roll weight: 600kg, max. roll diameter: 1050mm, max. roll width: 750mm, roll bore range: 38mm-125mm, max. cable diameter with dancer arm system: 35mm, max. operating speed: 143rpm, machine dimensions X/Y/Z: approx. 1300mm/300mm/1700mm. Documentation available. An on-site inspection is possible. Ijdpfx Aaey Tn Ics Ieic

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 50kVA Short circuit-current: 19kA Electrode force: 470daN / single stroke Throat depth: 250mm Ijdoxyqn Aopfx Aa Ijic --- Weld control: Digit 8 --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, 1. Currently, everything is designed exclusively for use with Inarca connectors/housings. To use other connectors that are not physically identical to Inarca versions, conversion is necessary (the Komax team is most familiar with this). 2. Double crimping is not possible; only single crimping is supported. 3. The ZETA 633/654 machine is equipped with 4 presses. The ZETA 633/656 machine has 3 presses (refer to the PP image from the first email). 4. The Zeta 654 machine features automatic sleeve insertion on the fastons. This is possible for 6.3 and 4.8 terminals. 5. The system can be adapted for different connector pole counts. We used connectors with various pole configurations (2P, 3P, 4P, 7P, 8P), depending on the customer’s requirements. On the 654 machine, connector feeding into the machine is automatic via a vibratory feeder. On the 656 machine, connectors are manually placed onto a pallet (one is inserted, the other pallet is in the stack and conductors are automatically inserted). 6. The presses are “smart” and automatically adjust the clamping height to the conductor. Iijdpfxsy Nfm Ij Aa Isc 7. The machines do not have an injection molding unit. 8. In practice, the maximum processed length has been 1,500 mm. According to technical specifications, even longer lengths are possible (see technical data below for each machine). 9. On the Zeta 656, connectors can be crimped on both ends of the conductors. On the Zeta 654, this is only possible on one end (see image below).