Forklift
Kalmar DCG 330-12 VORKHEFTRUCK/ GABELSTAPLER/ FORKLIFT

Name: Kalmar DCG 330-12 VORKHEFTRUCK/ GABELSTAPLER/ FORKLIFT
Brand: Kalmar
Availability: InStock

Year of construction

2023

Condition

Used

Location

Andelst

Forklift Kalmar DCG 330-12 VORKHEFTRUCK/ GABELSTAPLER/ FORKLIFT

Kalmar DCG 330-12 VORKHEFTRUCK/ GABELSTAPLER/ FORKLIFT

Show map

Machine data

Machine type:: Forklift

Manufacturer:: Kalmar

Model:: DCG 330-12 VORKHEFTRUCK/ GABELSTAPLER/ FORKLIFT

Year of construction:: 2023

Condition:: excellent (used)

Operating hours:: 106 h

Price & Location

Location:: Andelst, Netherlands

Call

Technical details

Lifting height:: 5,000 mm

Fuel type:: diesel

Mast type:: triplex

Power:: 185 kW (251.53 HP)

Gearing type:: automatic

Fork length:: 3,000 mm

Color:: red

Details about the offer

Listing ID:: A18657016

Reference number:: 1790247

Update:: 06.07.2025

Description

Transmission: Hydrodynamic powershift, 3 gears, automatic
Year of manufacture: 2023
Unladen weight: 46,760 kg
Lifting capacity: 33,000 kg
Overall height: 370 cm
CE certification: yes
Technical condition: very good
Visual condition: very good

KALMAR DCG 330-12 FORKLIFT
TRIPLEX FULL FREE LIFT
FORK SHAFT SYSTEM
33,000 KG at 120 CM
Iedpfx Aasv Hn D Eo Ejik
SHORT WHEELBASE = 475 CM
FORKS: LENGTH = 300 CM, WIDTH = 30 CM, THICKNESS = 11 CM
FRONT AND REAR VIEW CAMERAS
TIRE PRESSURE MONITORING
CENTRALIZED LUBRICATION
LED LIGHT PACKAGE

CHASSIS / BODY:
- Towing pin
- Steps with slip protection
- Rearview mirrors mounted left and right on the front fenders
- Heavy-duty and protective fenders

CAB:
- EGO cab
- Clear and hardened safety glass, thickness 6 mm
- Clear windows including sliding windows in the left and right doors
- Full doors with locks left and right
- Complete control system on right console including light control, rotary dial for display, levers for load handling system (electrically adjustable, 2-way)
- Multifunction lever on left side including horn, indicators
- Braking system with pedal left and right
- Cabin comfort including mirrors, handles, interior lighting, etc.
- Wipers and washers for front/rear and roof window
- Hydraulic steering with electrically height-adjustable steering wheel, manual fore-aft and lateral adjustment with steering knob
- External reverse lights
- Tiltable operator’s cabin
- Step handle, left
- Automatic heating and ventilation (ECH) with fresh air filter
- Speed control pedal right
- Kalmar standard key system
- Cup holder
- Coat hook
- Color display: fuel level, indication; engine and transmission temperature; engine oil pressure; battery voltage; clock and date; operating hour counter; service interval display; speed; engine RPM; various popup information; AdBlue display

STEERING SYSTEM:
- Kalmar steering axle, including double-acting steering cylinder

DRIVE TRAIN:
- Axletech drive axle

HYDRAULICS:
- Electric servo
- Sight glass on hydraulic oil tank
- Variable displacement pumps
- High-pressure filter
- Automatic increase of engine speed when using the load handling function
- Standard tilt angle 5F/10B

ELECTRICAL SYSTEM:
- 24 V electrical system
- Rear and brake lights, LED
- Working lights on front fenders, LED
- 2 mast working lights
- Turn signals including hazard lights, LED
- Main power switch

WHEELS:
- Michelin 16.00x25

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2012

221 listings online

Call

Send inquiry

Telephone & Fax

+31 488 2... show

These listings may also fit your interest.

Listing

Odder

1,213 km

Diesel Forklift
TCMFD80

Call

Condition: good (used), machine/vehicle number: 2852, Year of construction: 2006, load capacity: 8,000 kg, lifting height: 5,000 mm, mast type: duplex, fork carriage width: 150 mm, fork length: 1,600 mm, total length: 4,120 mm, total width: 2,220 mm, additional equipment features: Dual tread, Weight system, Fire extinguisher, Equipment: lighting, TCM FD80 from Uniktruck Iodpfjrk Rd Njx Aa Eoik

See details

Listing

Cantilever rack 3 St. Ständer für Spanplatten / 5 Ebenen Höhe 3,2m / Nutztiefe 1,8m / Länge 2,1m

Bad Feilnbach

1,553 km

Cantilever rack
3 St. Ständer für Spanplatten / 5 EbenenHöhe 3,2m / Nutztiefe 1,8m / Länge 2,1m

€2,550

ONO plus VAT

Call

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Isdpfx Aajqt Dmyj Eoik The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

See details

Listing

Wielka Nieszawka

1,772 km

GANTRY CRANE 5 T - NEW
WNM Sp. Z O.O.

€7,900

fixed price plus VAT

Call

Condition: new, Year of construction: 2025, NOTICE: POSSIBILITY OF CALCULATING ANY CRANE CONFIGURATION Thank you for your interest in our offer. WNM Sp. z o.o. offers a wide range of cranes, including: gantry cranes, semi-gantry cranes, cantilever cranes, column-mounted cranes, suspended overhead cranes, and top-running overhead cranes. Iedpfx Ajv Ni Rxja Eeik We invite you to submit inquiries for quotations. Our pricing is based on customer-provided data such as crane type, lifting capacity, lifting height, dimensions, and travel rail length. This advertisement refers to a gantry crane/hoist with a lifting capacity of 5 TONS. All crane components are made from high-quality materials, ensuring durability and resistance to damage even in harsh environments. TECHNICAL SPECIFICATIONS: GANTRY CRANE WITH HOIST – 5 TON CAPACITY Span Length: 6 m Lifting Height: 3.55 m Lifting Mechanism: 5-ton electric chain hoist Lifting Speed: 2.7 m/min Cross Travel Speed: 11 m/min Crane Travel Speed: 10 m/min Work Class: A3 Power Supply: 380V/50Hz/3-Phase Control Mode: Pendant control + remote control We issue VAT invoices for all machines. For any inquiries, please feel free to contact us.

See details

Listing

Slitting line Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791)

United States

6,640 km

Slitting line
Slitting line SECO60″ x 0.375″ x 50,000Lb (A3791)

Call

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll Iiedpfx Ajtiy Ntea Ejk 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

See details

Listing

United Kingdom

411 km

Machining center
CMSAntares 2615 - PX5

€130,000

FOB fixed price plus VAT

Call

Listing

Vertical machining center MIKRON VCE 1000 pro

Root

1,371 km

Vertical machining center
MIKRONVCE 1000 pro

Call

Listing

Schloß Holte-Stukenbrock

1,152 km

Machining center
Droop & ReinModimill

Call

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 2,400 mm, travel distance Y-axis: 2,850 mm, travel distance Z-axis: 1,000 mm, feed length X-axis: 20,000 mm, feed length Y-axis: 30,000 mm, feed length Z-axis: 20,000 mm, Droop & Rein Modimill built in 2001 Fidia C20 Iisdpevk Ubxsfx Aa Eek

See details

Listing

Single girder semi gantry crane Teichmann Krane

Essen

1,051 km

Single girder semi gantry crane
Teichmann Krane

Call

Listing

Werkendam

904 km

250 ton
Cranestock2x125 ton

Call

Listing

Vertical Turret Lathe - Double Column DÖRRIES SD 500 - 600

Germany

5,995 km

Vertical Turret Lathe - Double Column
DÖRRIESSD 500 - 600

Call

Condition: used, Technical details: faceplate diameter: 5000 mm swing diameter: 6100 mm turning height: 2400 mm ram stroke each side: 1490 mm ram head dimension: 340 x 340 mm max. workpiece weight: 100.000 kg total power requirement: 100 kW weight of the machine ca.: 155 t Iedpfew Rz U Asx Aa Eeik faceplate turning speed range: 0,4 - 50 U/min with 2 x 2 axes CNC SIEMENS 840 D *

See details

Advertise here