Diesel Forklift

Kalmar DCE80-9

Condition: good (used), machine/vehicle number: 3580, Year of construction: 2011, load capacity: 8,000 kg, lifting height: 2,610 mm, mast type: duplex, fork carriage width: 150 mm, fork length: 2,400 mm, total length: 4,050 mm, total width: 2,400 mm, operation weight: 12,080 kg, additional equipment features: Weight system, Warning triangle, Equipment: lighting, Kalmar DCE80-9 from Uniktruck Wheel type – Drive wheel: Supersoft - Dual mounting Wheel type – Steering wheel: Supersoft Wheel size – Drive wheel: 8.25-15 Nljdsyuipiepfx Ac Ajg Wheel size – Steering wheel: 8.25-15

Condition: like new (used), Year of construction: 2015, Workpiece Ø max. 400 mm Workpiece length max. 300 mm Chuck Ø max. 500 mm Swing Ø 520 mm Travel X-axis: 1,110 mm Travel Z-axis: 595 mm Main spindle: Power 40 / 100 % duty cycle: 47/34 kW Main spindle: Torque 40 / 100 % duty cycle: 600 Nm Main spindle: Max. speed: 2,850 rpm Njdpfx Ajxy Ac Soc Aolg Control: Fanuc 31i No Y-axis

Condition: good (used), machine/vehicle number: 3447, Year of construction: 2013, load capacity: 8,000 kg, lifting height: 6,250 mm, mast type: duplex, total length: 3,990 mm, total width: 1,990 mm, operation weight: 12,240 kg, additional equipment features: Front mud guards, Rear mud guards, Manual sliding cabin, Dual tread, Equipment: lighting, Kalmar DCE80-9 from Uniktruck Wheel type – Drive wheel: Supersoft Wheel type – Steering wheel: Supersoft Nledpfx Aeyuih Ejc Ajg Wheel size – Drive wheel: 8.25-15 Wheel size – Steering wheel: 8.25-15

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls Nodpfjihf Ufex Ac Aelg

Condition: excellent (used), Year of construction: 2009, operating hours: 29,000 h, functionality: fully functional, Equipment: documentation/manual, The INDEX C200 – manufactured in 2009 – is a powerful CNC production turning center with a FANUC 31i control, main and counter spindle, and a 65 mm bar capacity. The machine features a high-quality 3-turret design, with turrets 1 and 2 each equipped with X, Z, and Y axes, and turret 3 used for machining on the counter spindle. All three disc turrets are equipped with 10 stations and, with driven tools up to 6,000 rpm, enable highly flexible complete machining. With a portal parts handler, conveyor belt, C-axes on the main and counter spindles, and powerful spindle drives, the machine is particularly suitable for productive series production of complex turned/milled parts. Control: FANUC 31i Design: Machine with 3 tool holders / 3 disc turrets Bar capacity: 65 mm Machine bed: Vertically arranged gray cast iron machine bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose: ISO 702/1, Size 140 Cyl. Chuck diameter: 160 mm Power: 25 kW at 100% ED / 33 kW at 40% ED Torque: 112 Nm at 100% ED / 150 Nm at 40% ED Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose: ISO 702/1, Size 140 Cyl. Chuck diameter: 160 mm Power: 25 kW at 100% ED / 33 kW at 40% ED Torque: 112 Nm at 100% ED / 150 Nm at 40% ED Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Z-axis: 700 mm travel Rapid traverse Z-axis: 50 m/min Tool holder / Turret Design with 3 disc turrets, each with 10 stations. Tool system with 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Tool holder 1 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 320 / 550 mm (according to documentation) Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Nodpfx Ajy Tmhzjc Aslg Tool holder 2 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool holder 3 X-axis 10 stations Used exclusively for machining on the counter spindle X-axis: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Further technical equipment according to documentation Portal parts handling system with numerically controlled Z-axis Workpiece removal from main or counter spindle to conveyor belt Removal of scrap material from the main spindle into a scrap container Portal parts handler: Traverse speed: 100 m/min Traverse range: 70 mm Workpiece diameter max.: 90 mm Workpiece length max.: 250 mm Scrap length max.: 250 mm Workpiece weight max.: 3.5 kg Hydraulic system: Flow rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Coolant circuit: Flow rate: 19 l/min Coolant unit power: 13 kW Coolant system: Pump output: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Nlsdpfx Aei El Ucsc Aeg

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Nodpfx Ajyn Em Rec Ajlg Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06007153/001, total height: 6,050 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 210 kg, construction height: 6,050 mm, input voltage: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial Number: 06007153/001 Year of manufacture: 2006 Total load capacity: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Nsdpfxoxq Tbte Ac Aelg Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available upon request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (Height adjustable to available space) Power supply: 3/N/PE400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed; more or heavier trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Storage capacity with 36 trays: approx. 95 m², each tray approx. 2.64 m² - Electronic volume measuring system with 25 mm grid on the display - Access opening with sliding doors for protection of personnel and stored goods - C2000 Control System, with B/W OP2000 display - LED anti-glare lighting above access point - Toothed-belt drive for minimal noise - Toothed-belt drive for fastest order picking - Shelf spacing adjustable in 25 mm increments by configuring support profiles, ideal for high-density storage - Weight management system monitors the load per tray - Includes light pointer Price: On request only by e-mail Price: excluding VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from brands such as Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: used, functionality: fully functional, Forklift Kalmar LMV 9-600 Load capacity 9 T Diesel Njdpfsvq Im Usx Ac Aelg

Year of construction: 2005, condition: used, X-axis: 500mm, Y-axis: 450mm, Z-axis: 400mm, swivel rotary table dimensions: 630x500mm, max. table load: 200kg, swivel range: -5 to 110°, continuously variable speed: 20-10,000/min, drive power (100%/40% duty cycle): 9kW/13kW, torque (40% duty cycle): 82Nm, input resolution: 0.01mm, positioning tolerance: 0.010mm, rapid traverse: 24m/min, feed speed: 20m/min, number of SK40 tool positions (DIN 69871): 30, tool diameter (speed-dependent): D80-D130, max. tool length: 290mm, max. tool weight: 6kg, connected load: 17kW, control: Siemens 840D Powerline ShopMill, length: 4860mm, width: 4350mm, height: 2424mm, transport dimensions: 2210x2120x2150mm, weight: 4.05t, operating hours power-on time: 35,880h, spindle hours: 9609h. Equipment: digital drive and hydraulic clamping (positioning operation only), electronic angle display and plane transformation, chain magazine with double gripper, additional cabin door on the right, 80l coolant system, coolant/compressed-air switching, flushing gun, oil pan drawing, MDE interface (machine on, machine running, piece counter), documentation in German, 3D machine model for kinematic simulation in the CAM programming system (IGES, STEP format), numerous SK40 tool holders (DIN 69871), Heidenhain TS641 infrared touch probe, electronic handwheel, additional V24 RS232 interface on the control cabinet. An on-site inspection is possible. Nledpfxjzxr Rcj Ac Aeg