Forklift

Kalmar DCE100-12

Condition: good (used), machine/vehicle number: T331051234, Year of construction: 2005, operating hours: 25,000 h, fuel type: diesel, Technical details see photo 2 With heating 25,000 operating hours, 1st owner 2 pairs of forks 1x width 34 cm, length 240 cm + 1x width 20 cm, length 120 cm Kjdpfsnr Hbnsx Aa Eonf Additional weight -> Driving load 12,000 kg Own weight 20,000 kg Built-in scale Max. lifting height 4750 mm Tires Michelin XZM Garage-maintained machine, every service was performed by a specialist workshop (Kalmar partner). The transmission (ZF) was replaced at 23,000 hours The oil pump was replaced at 24,000 hours The new spare parts we installed in the forklift alone cost more than €45,000!!!! Price ex-sawmill Mast height: 4070mm Max. lift height: 4750mm Tires: Michelin XZM 12.00R20 with approx. 500 operating hours Total operating hours approx. 25,000 hours (hour meter replaced at approx. 11,000 hours due to a defect) New turbo at 10,028 operating hours New ZF transmission and new oil pump at 21,000 hours New lift chain at 23,000 hours and new seals for the lift cylinder New oil cooler at 25,000 hours 2 sets of forks, 340mm wide and 2450mm long, and 200mm wide and 1250mm long Volvo 6-cylinder engine Engine and valves were re-adjusted at 25,000 hours, all officially by a Kalmar mechanic (receipts available) All services performed by Kalmar mechanics, 500 hours of minor service and major service 1,000 hours The forklift was replaced with a new one at 20,000 hours (2014). From then on, it was only used as a backup for the sawmill in case a machine failed. The forklift was always kept in the garage and was regularly serviced and lubricated. You are welcome to inspect it in advance.

Condition: like new (used), Year of construction: 2021, Technical data: Conical bending machine Working width: 1050 mm Max. bending capacity for standard steel St40: 4.0 mm Diameter of conical upper roller: 70 - 185 mm Diameter of side and central lower rollers: 105 mm Conical bending device Mobile control panel with digital display Hydraulic folding bearings CE marking Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very little used, as new condition Knedpow An Uhjfx Aa Eof The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1998, workpiece weight 150 kg workpiece length 2500 mm diameter 160 - mm balancing speed variable 100 - 3000 U/min dia. axle journal 160 - 350 mm voltage 400 V total power requirement 1,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 7,50 x 1,30 x 1,60 m Control 0,60 x 0,60 x 1,85 m Software TIRA X9000 Operating System Windows XP Software update 2007 Knjdpowcg Eljfx Aa Esf Serial No.: R 32/98 Max display sensivitiy: 0.5 gmm Balancing speed 100 - 3000 RPM

Condition: used, power: 55 kW (74.78 HP), fuel type: diesel, lifting height: 13,800 mm, Year of construction: 2022, operating hours: 3,694 h, Technical information Make of engine: JCB Top speed: 29 km/h Empty weight: 11.370 kg Functional Lifting capacity: 4.000 kg Knsdpoxq Ayrofx Aa Eef Identification Serial number: JCB5A8MGVN3096768 Other information Front tyres / undercarriage remaining: 95 Rear tyres remaining : 95 Tyre brand: Alliance Transport dimensions (LxWxH): 6.23x2.35x2.59 Additional information Please contact PFEIFER GROUP for more information

Condition: new, table length 2400 mm Knodpfx Aaewz Rube Esf table width 1200 mm 4000 kg height of stroke 510 - 1550 mm total connected load 1,5 kW connected load frequency 400 V weight of the machine ca. 0.95 t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement.

Condition: new, Year of construction: 2025, The main features, functions and advantages of the welding positioner are: Functions: 1. Direction of rotation switch: Allows you to control the direction of rotation of the rotator disc. 2. Direction of rotation switch: Allows you to change the direction of rotation of the disc. 3. Smooth regulation of the plate rotation speed: Thanks to this function, you can adjust the rotation speed of the plate to a specific job. 4. Compact, compact design: The solid construction ensures the durability and strength of the device. 5. Control pedal: Makes it easier to control the operation of the positioner. 6. Thermal fuse: Provides additional safety during operation of the device. Kjderigmgspfx Aa Eenf 7. Brush motor: A brush motor is a type of DC electric motor that can be effective in various applications. 8. Plate tilt range 0 - 90°: The ability to tilt the rotator disc from 0 to 90 degrees is useful for welding in different positions. 9. Possibility of mounting a centering holder: Allows additional centering of elements. Advantages: 1. Higher work efficiency: The positioner helps increase efficiency in assembly and welding processes. 2. Reduction of production costs: Automation or facilitation of rotation of elements can contribute to lower production costs. 3. Repeatability of made joints: The device helps to maintain the consistency and quality of joints. 4. Flexibility in use: The ability to adjust the speed and direction of rotation makes the device flexible in adapting to various tasks. 5. Improved working conditions for the welder: Allows the welder to work more comfortably and in comfortable positions during welding. The set includes: 1. PS-500 positioner device. 2. Control pedal. 3. Power cable. 4. Operating instructions. 5. Mast with welding torch. The PS-500 positioner from CORMAK is a valuable tool in the industry that requires rotation and positioning of elements, especially during welding processes. It helps to increase efficiency, reduce costs and improve the quality of work. Technical parameters: Maximum load 300kg Worktable size φ500mm Tilt angle 0° ~ + 90° Rotation speed 0.2 ~ 2.5 rpm Rotation power 200W Tilting speed manual Voltage 220V-1PH-50HZ Weight support Dimensions 700x650x710 Weight 97kg *three-jaw chuck is not included

Condition: new, total length: 6,000 mm, rotor diameter: 500 mm, The 97VK1000 balancing machine is a high-tech equipment designed for service and repair companies specializing in the maintenance of industrial drive shafts weighing up to 1000 kg. It provides accurate and efficient balancing of cardan shafts, reducing repair time and ensuring high productivity of work processes. The 97VK1000 balancing machine is the perfect combination of high technology, reliability and versatility, making it an essential tool for engineers and technicians involved in the maintenance and repair of industrial cardan shafts. HIGHLIGHTS 1. Hard-Bearing Design: Designed with high precision and reliability in mind, the 97VK1000 balancing machine features a hard-bearing design to balance shafts with large initial imbalances. 2. Universal Design and Equipment: The 97VK1000 is equipped with universal equipment to balance shafts with flanges of various shapes and sizes. Special plates and adapters allow cardan lengths up to 6000 mm and flange diameters up to 500 mm. 3. Fast and Efficient Balancing Process: Thanks to the short unbalance measurement cycle, the 97VK1000 provides fast and accurate adjustment, which reduces repair time and increases the productivity of service and maintenance operations. 4. Safety and Ease of Operation: Screw jacks provide comfort and safety when working on the machine, the asynchronous variable frequency drive allows infinitely variable speed control without stopping the motor, providing optimal modes for balancing. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • Easy to learn working skills and maintenance for any employee. SPECIFICATIONS Weight range of balanced shafts 50 - 1000 kg Maximum tube diameter 300 mm Maximum flange diameter 500 mm Maximum drive shaft length 6000 mm Minimum achievable residual specific unbalance 10 g*mm/kg Rotor rotation speed 300 – 1000 rpm Electric motor power 11 kW Parameters of the supply network 380V, 3 Ph, 50Hz Kodpswc T Utjfx Aa Ejnf Do you repair industrial drive shafts? Then we can additionally offer an Assembly-Welding Workbench for heavy shafts. Please contact us to get the best offer! 👇

Condition: good (used), machine/vehicle number: 3270, Year of construction: 2012, load capacity: 12,000 kg, lifting height: 4,540 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 4,450 mm, total width: 2,550 mm, operation weight: 17,820 kg, additional equipment features: Dual tread, Front mud guards, Weight system, Equipment: lighting, Kalmar DCE120-6 from Uniktruck Knjdsul D H Aepfx Aa Esf

Condition: used, functionality: fully functional, Year of construction: 2006, load capacity: 17,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,695 mm, fork carriage width: 2,950 mm, fork length: 2,400 mm, empty load weight: 24,920 kg, drive type: Diesel, construction width: 2,950 mm, Heavy-duty forklift – diesel Load centre: 1200 Fork width: 250 mm Fork thickness: 100 mm Knjdpsxpy Rrofx Aa Eef ISO class: Terminal West Mast type: Standard Transmission: Dana Clark 342TE13310-13 Technical condition: good Front tyre type: pneumatic Front tyre size: 12.00-20 Rear tyre type: pneumatic Rear tyre size: 12.00-20 Description: 2,950 mm wide fork carriage Side shifter, fork positioner, 3rd valve, 4th valve, front work lights, heater, full cab,

Condition: good (used), machine/vehicle number: 2480, Year of construction: 2002, load capacity: 15,000 kg, lifting height: 4,060 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,200 mm, total length: 5,200 mm, total width: 2,600 mm, operation weight: 22,400 kg, additional equipment features: Centralized greasing system, Weight system, Engine heater, Equipment: lighting, SveTruck 15120-35 from Uniktruck Kjdpequwhiefx Aa Esnf