Screw compressor S016200

Kaeser ASK 35

Condition: excellent (used), Year of construction: 2011, operating hours: 53,400 h, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 2.94 m³/h, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, Serial nr. 1170 Rodpsym Axzofx Acvsr Maintenance carried out by Kaeser

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 2 MAIN SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - Max. turning diameter : 120 [mm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0.1 [°] POWER SUPPLY - Supply voltage : 230 [V] - Total installed power : 7.5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 5.400 x 1.900 [mm] - Machine height : 2.000 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 33912 [h] - Number of working hours : 21069 [h] EQUIPMENT - CNC : FANUC 160i - Coolant tank Rodpfx Aceu E U Ufovsr - Chips conveyor - Parts catcher - Parts conveying strip

Condition: good (used), Year of construction: 2020, operating hours: 1,730 h, functionality: fully functional, overall weight: 580 kg, total length: 1,335 mm, total width: 750 mm, total height: 1,880 mm, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, noise level: 66 dB, protection type (IP code): IP55, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser Aircenter SK22 Screw Compressor (2020) Manufacturer: Kaeser Type: Aircenter SK22 Year of Manufacture: 2020 Condition: Very good, used Run-on hours: 6,000 h Load hours: 1,730 h Maintenance in 2,589 h Technical Specifications Pressure 11 bar Effective free air delivery 1.67 m³/min Rated motor power 11 kW Motor protection class IP 55 Power supply 400 V / 3 Ph / 50 Hz Dimensions (W x D x H) 750 x 1,335 x 1,880 mm Weight 580 kg Air receiver 350 l Compressed air connection G 1 Sound pressure level 66 dB(A) Refrigeration dryer Power consumption 0.49 kW Pressure dew point 3 °C Pressure drop 0.06 bar Refrigerant R 513a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment: EN 60204-1: Yes Scope of delivery: Rjdpfx Acjxnnd Dovjr – Complete original documentation – RFID cards (2x) – 5m power cable with 32A plug

Condition: used, Year of construction: 2019, number of spindles 8 bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. Rodpfswf D S Iox Acvsr The machine only has 15.650h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: excellent (used), Year of construction: 2007, 1 x oil-flooded single bar feeder LNS Super Hydrobar 6.65 HS-4,4 Year of manufacture: 2007 In very good condition. Previously installed on Traub TNA 300 Technical data: Diameter: 32/40/48/55/62/68 mm Bar length: 3,100 mm Redsvawtpjpfx Acvjr Accessories: Machine feet Operating manual with circuit diagrams The bar feeder can be inspected at our warehouse in Reichenbach.

Condition: as good as new (ex-display), Year of construction: 2025, Exhibit available immediately: New variable Kaeser SK 25 SFC - 10 bar screw compressor Pressure: 10 bar Nominal power: 15 kW Delivery rate: 0.84 to 2.25 m³ / min Sound level: 68 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 895 x 1260 mm Weight: 337 kg Operating hours: 1.5 Redok Adcaepfx Acvjr Visit our store. We always have a large selection of new and used compressors in stock!

Condition: ready for operation (used), Year of construction: 2015, operating hours: 48,086 h, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2015. It features a Siemens 840 D control, a main spindle and counter spindle, and a bar machine package for efficient operations. Ideal for complex turning and milling tasks, it includes a hinge type conveyor and a coolant system with multiple pressure settings. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Located in Iceland, contact us for more information. • IMS 76 main spindle • Counter spindle • 2 x 16-station Sauter star turret VID 30 • Siemens 840D control Rsdpjx D Ndwefx Acver • Eccentric turning and milling capability • TC alternating speed • Glass scales on X1, X2, X3, Y1, Z1, Z2, Z3 • Counter spindle slide with cross stroke, C3, tailstock Additional equipment • 980 L coolant system with 8 bar/20 L and 20 bar/40 L high-pressure, M-function programmable • Paper band filter • Chuck rinsing device for main (outside) • Chuck rinsing device for counter (outside) • Coolant spray gun • Hinge-type chip conveyor • Bar machine package (bar feeder) • Window cleaning with compressed air • SK package for aluminum machining • Tool breakage monitoring Artis CTM

Condition: used, TECHNICAL DETAILS - min. / max. Ø : 2 / 16 [mm] - max. bar length : 4 [m] Rodpouhbhzjfx Acver - diameter : 17 - 13 - 6

Condition: good (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 2601-0324, spindle speed (min.): 6,500 rpm, spindle bore: 42 mm, travel distance X-axis: 326 mm, travel distance Y-axis: 265 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 18 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (min.): 6,500 rpm, type of input current: three-phase, bar passage: 42 mm, The Sprint 42 Linear from DMG Gildemeister is a CNC turning/milling center featuring 6 linear axes and 2 C-axes. Direct drives enable high acceleration rates and precise machining operations. Both the main and sub spindles have been fitted with new bearings, and the machine has undergone a comprehensive overhaul. The following components have recently been renewed: - Drive motor of the driven tool 2 replaced - Sub spindle newly fitted with bearings - New door interlock switch installed Spindles: Main and sub spindle each up to 6,500 rpm, main spindle bar capacity 42 mm, sub spindle 38 mm Tool capacity: 26 stations, up to 11 powered tools; turret with Y-axis for milling and threading operations Axes / travels: Slide 1: X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm Slide 2: X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm Rapid traverse: up to 30 m/min (X1, Z1, X2, Z2), Y2 up to 18 m/min Control: FANUC 160i-TB with 15" DMG SlimLine panel Including IEMCA Boss 545-E bar feeder The IEMCA Boss 545-E bar feeder (type 32 LL, year 2007) is included in the scope of delivery and enables continuous material feed up to Ø 42 mm. It operates on 400 V / 50 Hz and requires 6 bar air pressure; its own weight is approx. 860 kg. Rodsyvy I Topfx Acvsr Inspection & collection: On-site inspection is possible If you are interested or have technical questions, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8086010539B, spindle speed (max.): 6,500 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,500 rpm, feed length X-axis: 65 mm, feed length Y-axis: 120 mm, feed length Z-axis: 350 mm, total height: 1,920 mm, total length: 4,900 mm, counter spindle motor power: 3,700 W, counter spindle speed (max.): 6,500 rpm, number of axes: 6, DMG Gildemeister Sprint 42 Linear (year of manufacture 2008) with IEMCA Boss 545‑E bar feeder The main and counter spindles have been newly re-bedded, and the machine has undergone a comprehensive general overhaul. Additionally, the following parts have been newly replaced: - Counter spindle dismantled, newly re-bedded, and overhauled - Ball screw of the Y-2 axis replaced - Main spindle newly re-bedded - New clamping fingers and clamping rollers on the main spindle - New work area lamp - New valve manifold for the main and counter spindle clamping units - New rotary union for the bar feeder - 4 new driven tools The DMG Gildemeister Sprint 42 Linear is specifically designed for automated turning operations. With two workpiece spindles, six linear axes, and optionally two C-axes, it enables simultaneous machining on the main and counter spindles. The maximum bar capacity is 42 mm, and the high spindle speed reaches up to 6,500 rpm. Technical specifications: Axes & slides: Travel distances X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm with rapid traverses up to 30 m/min. The second slide provides X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm with rapid traverse 30 m/min (X2/Z2) or 18 m/min (Y2). Tool capacity: Turret with 26 stations; accepts both fixed turning tools and driven tools for milling and threading operations. Spindles: Main and counter spindles with 6,500 rpm, nominal ratings 5.5 kW (main) and 3.7 kW (counter), torque (S1) 37.5 Nm and (S2) 19.6 Nm. Control: CNC Fanuc 160i‑TB with SlimLine control panel and 15" color TFT – intuitive operation via industrial PC. Dimensions & logistics: Base machine (L × W × H): 3,354 × 946 × 1,571 mm, weight 4,700 kg. Control cabinet: 5,400 × 680 × 1,750 mm. Machining center at ergonomic height of 1,100 mm. IEMCA Boss 545‑E bar feeder (type 32 LL, year of manufacture 2007) The included bar feeder greatly facilitates series production. It is designed for bar diameters up to 42 mm, weighs approx. 860 kg, and operates at 400 V/50 Hz; required compressed air connection is 6 bar. Redpfxsyt E T Us Acvjr If you have any questions or require further information, please feel free to contact us.