Photovoltaic inverters for solar plant

KACO POWADOR

Condition: used, mileage: 1,400 km, power: 43 kW (58.46 HP), first registration: 07/2008, fuel type: diesel, overall weight: 4,900 kg, color: orange, gearing type: mechanical, suspension: other, operating hours: 1,400 h, Equipment: air conditioning, all wheel drive, HU/AU new, 08.07.2008 1,400 operating hours 43 kW 2,746 cm³ industrial front loader Diesel All-wheel drive Cabin Air conditioning Hydraulic shuttle Turf tires Agricultural tires possible Permissible total weight 4,900 kg FOR US, CONDITION AND GUT FEELING ARE DECISIVE, PRICE IS SECONDARY. For further questions, Mr. Faller will be happy to assist you at the following number. //*TRADE-IN, PART EXCHANGE OR LEASING OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information provided without guarantee* More offers can be found on our homepage: The description and stated data do not constitute a binding agreement and are not guaranteed. The only legally binding document is the purchase contract concluded at the dealership. Subject to errors and prior sale! Nkedpfevidc Asx Agwow

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Njdpewbuyzefx Agwskw

Condition: used, Year of construction: 1979, Technical details: turning diameter over bed: 540 mm turning length: 630 mm centre distance: 900 mm center height over bed: 270 mm center height: über Hinterschlitten: 138 mm Turning diameter: über Hinterschlitten: 250 mm longitudinal feed: 700 mm facing movement : 80 / 75 mm revolution per minute: 1,8 - 450 bei 8x steples U/min clamping diameter: 26 mm range of feed in x - axis: 12 step / 0,063 - 0,63 mm/U Nedevbhv Rspfx Agwskw range of feed in y - axis: 36 step / 0,070 - 1,11 mm/U tailstock quill: MK5 mm tailstock quill stroke: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,76 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the rear and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swivel range of the rear slide = 360deg. Swivel range of cross slide = 360deg. Lathe chuck is cone disc Ø 200mm with MK5 Equipment: turning mandrel Ø 49,5 x 400mm Measuring system ARBAH-L 3+1 Inverter FRENIC 5000G11 i.D. *

Condition: good (used), functionality: fully functional, year of last overhaul: 2023, EN: For sale a complete and efficient line for profiling steel sheet from tape, e.g. Magnelis, into any profiles, e.g. type C, used in photovoltaic installations and farms, construction of steel halls, shelters as well as for furniture production, etc. Njdpeu A U Utsfx Agwekw The line with the unwinder is located in a heated hall in almost laboratory conditions, for the buyer the possibility of starting it up before purchase, I have contacts to companies that supply sets of profiling rollers for specific profiles as well as to companies dealing with the modernization of such machines in terms of its expansion, etc.

Condition: excellent (used), Year of construction: 2008, For sale complete PVC carpentry production line, brand URBAN, composed of: *1. Welding machine at 2 ends; URBAN brand, model: AKS 5305-FF, serial number: 53372, year of manufacture: 2007, perfect working condition; *2. Channel milling machine; URBAN brand, model: WS 103, serial number: 790, year of manufacture 2007, perfect working condition; *3. 2-headed saw: brand RAPID, model DGS 100, serial number: 004606128, year of manufacture 2010, sold together with vacuum cleaner with bags, perfect working condition; *4. MACC rebar cutting saw, model NEW 275, serial number: 88266, year of manufacture 2008, perfect working condition; *5. Pantograph brand URBAN, model MLA A23 – 100466321S, serial number: 528-0, year of manufacture: 2008, perfect working condition; 6. Upright milling machine: URBAN brand, model M7CRH-100149891, serial number 559, year of manufacture 2008, perfect working condition; Nksdpfx Aoucl Dcsgwew *7. De burring machine with 2 groups of cutters; brand URBAN, model SV 280, serial number: 29342, year of manufacture 2008, perfect working condition; *8. Saw for cutting sticks: brand URBAN, model GLS 102; serial number: 102015; year of manufacture 2010, perfect working condition; The production capacity of the line is 30-50 units/8h (depending on the number of people serving the line). The line was used very little from 2010 to 2014, and not at maximum capacity. We can also sell individual machines on request from the line. Net price complete line 33.500 Euro + VAT, negotiable, FCA Oradea.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Njdjg Ezaropfx Agwokw Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,600 kg, color: white, total length: 1,400 mm, total width: 1,300 mm, total height: 2,225 mm, The EnergyCore EC-100&230 energy storage (100 kW, 230 kWh) is an all-in-one solution ideal for industry, RES farms and data centers. It offers high efficiency, safety and reliable energy management with an advanced Production plants Thanks to its ability to respond quickly to fluctuations in energy demand, production plants can avoid costly downtime. It increases power reliability and enables more efficient use of renewable energy. Industrial companies The EnergyCore EC-100&215 energy storage supports the stability of the power supply in large industrial plants, reduces energy costs during peak periods and increases operational efficiency. Ideal for managing excess energy and supporting production processes. Nkedpfx Asvuhuajgwjw Data centers Provides reliable power supply during power outages, which is critical for the continuity of data center operations. The energy storage acts as a support for the UPS and offers additional protection against failures and power stability under high loads. Photovoltaic and wind power systems The EnergyCore EC-100&215 enables the efficient storage of excess energy generated by renewable sources such as photovoltaic and wind power systems. It maximizes self-consumption, minimizes energy losses and promotes sustainable resource management. INNOVATIVE APPROACH Mobile app for Proton energy storage Modern Proton energy storage - maximum efficiency and long service life Energy storage from Proton is based on the innovative LiFePO4 technology, which enables high current efficiency and an extremely long service life with several thousand charge and discharge cycles. LiFePO4 batteries have a high energy density, so that large amounts of energy can be stored in the smallest of spaces. In addition, these cells have a low self-discharge rate and are immune to the "memory effect" that occurs with older battery types such as Ni-Cd, Ni-MH or AGM We have been in business since 2007 (over 17 years) Under what conditions can our energy storage units be operated? Single-family homes Restaurants Hotels Office spaces Farms Server rooms Public facilities Production facilities Universities and technical colleges Anywhere where constant access to electricity is required - The customer service office is available on weekdays from 8 a.m. to 4 p.m. - The service department is available 24 hours a day (24/5) for our customers. If you have any questions or problems that require a quick response, the best way to contact us is by phone.

Year of construction: 1993, condition: used, TYPE : DEA 400/2000 Type YEAR : n.d. Year Njdpfx Aeihf R Uogwjkw MAXIMUM SLEDGEHAMMER PRESSURE : TON. 400 Ram capacity SLIDING STROKE : mm. 1,100 Slide strok MAX VERTICAL LIGHT : mm. 1,600 Max shut height TABLE DIMENSIONS : mm. 2,000 x 1,600 Table size RAPID SPEED : mm/sec 650 Fast stroke TABLE PRESS CAPACITY : TON. 160 Cushion capacity PRE-MILER stroke : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 5,800 Ground up to floor FRONT LIGHT : mm. 3,400 Distance btw uprights LATERAL LIGHT : mm.1,600 Lateral window

Year of construction: 1980, condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Swing over bed 600 mm Swing over cross slide 260 mm Swing diameter in the bend 800 mm Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm spindle bore 71,5 mm Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm Nodpfogyy I Asx Agwjkw inner taper quill MK 5 Length x width x height Weight of the machine 5500 kg Accessories Tailstock Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Quadruple turret behind the center Tool holder Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Videoconference via whatsapp possible by appointment

Condition: used, centre height: 140 mm; table size: 150x1050 mm; Njdecbhl Njpfx Agwskw longitudinal path (manual): 600 mm; transverse path: 230 mm; height adjustment: 250 mm; 2 engine speed: 1500-3000 rpm; 6 grinding spindle speed: 2000-6000 rpm; biggest grinding wheel diameter: 250 mm;