Diesel Forklift

Hyster H9.00XM-6

Condition: good (used), machine/vehicle number: 21906, Year of construction: 2017, load capacity: 9,000 kg, lifting height: 4,650 mm, mast type: duplex, fork carriage width: 150 mm, fork length: 2,440 mm, total length: 4,260 mm, total width: 2,500 mm, operation weight: 13,340 kg, additional equipment features: Rear mud guards, Warning triangle, Dual tread, Front mud guards, Equipment: lighting, Hyster H9.00XM-6 from Uniktruck Bwsdpfx Agoygmyiszji

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 690 mm, spindle bore: 155 mm, turning diameter: 1,090 mm, center height: 500 mm, center width: 700 mm, turning length: 3,000 mm, Parallel Lathe ZMM-SIBIMEX CU 1000/3000 Bwjdpfsylazwox Agzei Year of manufacture: 2007 CE certified Excellent overall condition Centre height: 500 mm Maximum turning length: 3000 mm Swing over bed: 1090 mm Swing over carriage: 690 mm Swing in gap: 1250 mm Spindle bore: 155 mm Bed width: 700 mm Motor power: 22 kW Approx. weight: 8000 kg Number of speeds: 24 Spindle speed range: 6.3 - 1250 rpm Speed range Machine complete with fixed and travelling steady rests Self-centering chuck 4-jaw faceplate Powered tailstock Elbo axis DRO Rapid traverse on feeds

Condition: good (used), machine/vehicle number: 3448, Year of construction: 2019, load capacity: 9,000 kg, lifting height: 6,960 mm, mast type: triplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 4,360 mm, total width: 2,550 mm, operation weight: 16,070 kg, additional equipment features: Centralized greasing system, Hydraulic sliding cabin, Dual tread, Warning triangle, Equipment: lighting, Hyster H9.00XM-6 from Uniktruck Bedpfx Agewkiy Uezswi

Condition: good (used), machine/vehicle number: 3569, Year of construction: 2017, load capacity: 9,000 kg, lifting height: 4,650 mm, mast type: duplex, fork carriage width: 150 mm, fork length: 2,400 mm, total length: 4,304 mm, total width: 2,419 mm, operation weight: 13,700 kg, additional equipment features: Front mud guards, Rear mud guards, Equipment: lighting, Hyster H9.00XM-6 from Uniktruck Bwodpfjyg N Ehex Agzji

Condition: new, functionality: fully functional, power: 36.77 kW (49.99 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,050 kg, lifting height: 4,200 mm, tire size: 20,5-70 R16, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, emission class: euro5, mast type: telescopic, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 1,400 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, head guard, hydraulics, low noise, parking heater, soot filter, standard shovel, trailer coupling, H&R Telehandler 3514T – The powerful telehandler for versatile applications Bwoderdhx Tspfx Agzoi Advantages of the H&R Wheel Loader 3514T Extended working range: Thanks to the telescopic boom, the loader can lift loads of up to 1.4 tons to a height of up to 4.4 meters. Powerful engine: The Yunnei DEF20CFF4 50 hp engine ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its weight and a lifting capacity of 1400 kg, the H&R Wheel Loader 3514 remains relatively maneuverable – ideal for tight construction sites and agricultural applications. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 4th hydraulic control circuit to operate additional attachments such as mowers, bale grabs, snow plows, and much more. Comfortable cab for all-day use: The H&R Loader 3514T offers a spacious, air-conditioned comfort cab with an adjustable seat, diesel auxiliary heating, and rearview camera. This allows you to carry out even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3514T • Fully equipped • Extended reach thanks to telescopic boom • Extensively optimized in Germany • Powerful and versatile - versatile • Compact design ensures good maneuverability • Comfortable cab with heating and ventilation as well as a diesel auxiliary heater • Rearview camera with display • Adjustable steering column and seat • Joystick with electric gearshift for precise control • Additional control circuit for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €26,160.00 VAT: €4,970.40 Gross: €31,130.40 Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 50 hp (36.8 kW) Emissions class: Euro 5 Lifting capacity: 1400 kg Lift height: 4401 mm (bottom edge of standard pallet fork) Unloading height: 3373 mm (bottom edge of standard bucket, tipped out) Wheelbase: 255 mm Tires: 20.5-70 R16 Dimensions: 5210 x 1690 x 2560 mm Weight: 4050 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: good (used), machine/vehicle number: 3069, Year of construction: 2018, load capacity: 9,000 kg, lifting height: 5,600 mm, mast type: duplex, fork carriage width: 150 mm, fork length: 2,440 mm, total length: 4,270 mm, total width: 2,555 mm, operation weight: 13,430 kg, additional equipment features: Rear mud guards, Centralized greasing system, Dual tread, Front mud guards, Equipment: lighting, Hyster H9.00XM-6 from Uniktruck Bwsdpfxeul Du Ts Agzji

Condition: used, power: 55 kW (74.78 HP), fuel type: diesel, lifting height: 13,800 mm, Year of construction: 2022, operating hours: 3,694 h, Technical information Make of engine: JCB Top speed: 29 km/h Empty weight: 11.370 kg Functional Lifting capacity: 4.000 kg Identification Serial number: JCB5A8MGVN3096768 Other information Front tyres / undercarriage remaining: 95 Bwjdpjxq Ayrjfx Agzji Rear tyres remaining : 95 Tyre brand: Alliance Transport dimensions (LxWxH): 6.23x2.35x2.59 Additional information Please contact PFEIFER GROUP for more information

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,550 mm, turning diameter over bed slide: 1,550 mm, turning diameter over top slide: 1,220 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,600 mm, total height: 1,600 mm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-155B2/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6.000 mm - turning diameter over bed: 1.550 mm - turning diameter over support: 1.220 mm - turning diameter in bridge recess: 1.880 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 Bwedpfx Aov Ab Dqegzei transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 8.500 mm width: 2.130 mm height: 1.550 mm total weight: 14.100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post - Standalone chip and splash protection back wall over the whole machine length - inverter in the E-cabinet with slow-start-function and 1 x stepless potentiometer controller

Condition: new, table width 3000 mm table length 1500 mm burner heads 1 Control CNC feed 20.000 mm/min total power requirement 15 kVA dimensions of the machine ca. 4,5 x 2,5 m * Heavy machine bed with precision guides for quiet movement machine * A ball bearing cross carriage for height adjustment with 400mm vertical Hub * Thermal separation of the drive and cutting areas ensures the highest precision * Automatic height finding and torch height control during cutting Bwjdpfx Agspm U U Nszji * Torch holder with collision protection and automatic shutdown in the event of a collision * Installation or implementation of the machine using the plug & play method with a forklift, Ant or crane possible * 3-sided accessibility to cutting area through boom design SATOTEC suction table: The SATOTEC table system is characterized by a stable table construction max. cutting thickness of 150 mm. For cutting a workpiece thickness of 150 mm, oxyfuel cutting technology is required. The workpiece support frame has interchangeable ones placed at a 45° angle and 3 mm thick flat iron slats. The distance between the slats is 50 mm. Power source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, increase possible with ProPierce Technology * Marking, notching and punching, including coated metallic materials * Inverter power source with digitally controlled, fully electronic process flow * Integrated cooling with partially automated filling and emptying Gas control: Fully automatically controlled, processor-controlled plasma all-gas console Q- Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction TEKA EcoCube 5.5 kW Medium to be filtered: dry, fat-free or oil-free dust/smoke Filter area: 100 m² (4 cartridges of 25 m²) Filter cartridge: BIA M, Type Nano Degree of separation: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan performance: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz. Current consumption: 11.5 A Current type: 3Ph+N+PE Fan structure: on the system, including silencer duct bend, right side Motor control: frequency converter Noise level: 75dB(A) + max 10 dB(A) with cleaning pulse Intake port: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: Light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Locking hooks and toggle locks - Compressed air connection and condensate drain each mounted with one Bulkhead fitting - Compressed air connection with hose nozzle d=8mm - Provide the system with grounding bolts - Cable in UL version - EATON frequency converter on the left in the attached control cabinet

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 1 used steam boiler ----- - mounted on frame - Manufacturer: Bay Kessel - BBS Germany Type: HDK 7000 Capacity approx.: 7,000 kg/h Operating overpressure: 10.0 bar Increased test pressure: 18.5 bar Max. steam temperature: 184.6 °C Water content full approx.: 17,500 l Year of manufacture: 2017 CE marking: CE 0036 Equipped with Weishaupt gas/oil burner WM-GL50/1-A, Bedpfx Agox A Dpljzswi version ZM-R-NR, gas control line, separate control cabinet, feed water pump, Eco, and existing coarse and fine fittings.