Folding machines and devices

Herzog Heymann 3. Station M7.40

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) Kfsdoh Nrh Ujpfx Aa Eoa ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: excellent (used), Year of construction: 2006, Collating machine with a sewing, folding and trimming module manufactured by the renowned C.P. Bourg company. Year of production 2006 in the following configuration: Collating Tower BST D+ The collator is a very versatile device for collating many types of paper in a wide range of formats. The sheets are fed by suction belts rather than rollers, which eliminates the possibility of leaving marks on the paper. The suction and blowing force is adjustable without the need to interrupt the operation of the device. The machine is controlled from a touch panel. Specifications: Format range: min. 115 x 200 mm; max. 350 x 520 mm Speed range: 9,000 cycles/hour (10 x 80 g/m² A4 sheets fed per shaker) 5,500 cycles/hour - pick-up per stacker Paper weight: 50 – 250 g/m² Pile height: up to 5 cm Machine dimensions - main tower: 93 x 73 x 200 cm (length x width x height) Weight: 360 kg The SBM 4 unit has a modular design and consists of the following parts: AGR T stitching machine • two Hohner sewing heads • quick adjustment of the position of the heads • block or saddle stitching • Regular staples • Wheels for quick sliding • Work in line or as a separate unit Specifications: Format range: min. 117 x 200 mm, max. 320 x 450 mm (block sewing) max. 320 x 500 mm (saddle stitching) Paper weight: 60 - 250 g/m² Maximum thickness of the stitched fold: 6,35 mm Capacity: 3,000 trains per hour Dimensions: 55 cm x 60 cm x 110 cm Weight: 114 kg PA T Folding Machine • Automatic synchronization with collating tower and stitching machine speeds • In-line or off-line operation in combination with an AGR T stitcher Specifications: Format range: min. 117 x 200 mm, max. 320 x 500 mm Maximum quantity of folded material: 22 sheets 80 g/m² Capacity: 3,000 products per hour Dimensions: 60 cm x 60 cm x 73 cm Weight: 134 kg TR T Knife Automatic synchronization with colalting tower speeds, stitchers and folding machines, waste container. Specifications: Kfjdpfsrq Havex Aa Eoa Cropped brochure size range: min. 117 x 100 mm, max. 320 x 250 mm Paper weight: 60 - 250 g/m² Maximum trimmed quantity: 44 sheets 80 g/m² Capacity: 3,000 trains per hour Dimensions: 150 cm x 60 cm x 82 cm Weight: 170 kg SBM Equipment Counter of ready-made sets. A function that throws assemblies with an error without interrupting the operation. Two-knife cutting system with exceptional durability. Reinforced 4-roller folding system. Make adjustments to settings without interrupting your working.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Year of production: 2005 Manufacturer: GUK-Falzmaschinen Griesser & Kunzmann GmbH & Co. KG Machine availability – on request; Machine in use; possibility to carry out work tests during inspections; Good technical condition; Folding machine manufactured by the renowned German company GUK equipped with a high pile feeder (sheet picking with a suction roller from above) FL2-50, 2 folding pockets aggregates, pocket with maximum working widths of 50 cm and mobile chute delivery. Folding machine GUK model FA 50/6-6 FL2-50 – infeed width 500 mm (6+6 folding pockets). Maximum input format: 500 x 850 mm Minimum input format: 105 x 145 mm Minimum folding length: 45 mm Feed rate of sheets from feeder: 40 - 180 m/min Maximum performance: 27.000/from sheet A4 Kfsdpjrx S Iwofx Aa Eea Power supply: 400 V/50 Hz Machine equipment: High pile feeder FL2-50; Batch counter. Multifunction counter programming the operation of the machine. Ability to fold sheets in groups (lots) of the given number in each lot, with stepless adjustment of the spacing between parties. I. folding unit FA 50/6, 6 folding pockets; Sound reduction hood, top. II. folding unit FA 50/6, 6 folding pockets Sound reduction hood, top. Mobile chute delivery S 520. To be added after I or II folding station.

Condition: excellent (used), Vertical band saw JAESPA type MSU 4roller diameter 420 mmoutreach 400 mmtable size 615 x 615 mmcutting height 350 mmsaw blade length min. 3450 - max. 3640 mmsaw blade speed 20-2500 m/min. stepless mains connection 400 volt, 50 Hz - stepless saw band speed over 2 motor speeds, 2 gear stages and stepless belt drive - saw table swivelling - 2 gear stages - saw blade butt welding machine IDEAL BS 0-16- saw blade shear - grinding stone for grinding the weld seam space requirement L x W x H 1100 x 950 x 2000 mmWeight approx. 700 kgsehr good, immediately operational condition2 identical machines in stock Kfsdjd Tx D Uspfx Aa Eja

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Kodpfx Aaed E A I Ie Esfa Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: used, Year of construction: 2003, - Folding stations: 1st folding unit with 6 pockets (parallel fold) - Folding stations: 2nd folding unit with 4 pockets (parallel fold) - Folding stations: 3rd folding unit with 2 pockets (parallel fold) - Max. sheet size: 520 x 840 mm - Min. sheet size: 105 x 148 mm - Max. speed: up to 30,000 sheets/hour (depending on fold type and material) - Paper weight: 40 – 250 g/m² Ksdpjwv D Svsfx Aa Esfa - Folding types: single fold, roll fold, zigzag fold, double parallel fold, and more - Feeder: flat pile feeder (PBA) - Control: electronic control with folding program memory - Delivery: shingle stream delivery (STA) - Optional: perforating, creasing or cutting units (depending on configuration) - Format adjustment: manual - Machine dimensions (L x W x H): approx. 2,800 x 1,200 x 1,400 mm - Weight: approx. 1,000 – 1,200 kg Special features: - Robust construction with high precision - Suitable for small and medium print runs - Ideal for commercial printers and finishing companies 1 punching tool NE 515 SBP 46-2 vertical sheet delivery, year 1992

Condition: used, Year of construction: 1989, Sammelhefter / Saddle Stitcher Müller Martini 335Year 1989 7 Feeder Type 306 Umschlaganleger / Cover Feeder Type 344.0400 Heftstation / Stitching unit Bravo Plus Typ 335.0401 Dreischneider / Three Knife Trimmer 890.8400 Kreuzleger / Compensating Counter Stacker 2 Compressors - Manuals all included Kfedpfx Aaeq Rhx Ss Eea Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2007, MBO K 800.2/6 SKTL AUT with pallet feeder and ASP 66 ME delivery included Parallel break with automated pocket (6 pieces) and roller adjustment MBO slitter shaft cassette Cross and triple fold with pneumatic knife control + pocket is fully automated (can be rotated 180° in a few simple steps) Sword folding unit with rotating three-fold knife LEFT and RIGHT plus Kodpfxerwzmwe Aa Eefa Parallel buckle plate in the RIGHT and LEFT knife folding unit The main computer including touch-screen display was renewed in 2022!

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 795, working width: 360 mm, input voltage: 380 V, Equipment: documentation/manual, For sale from Norderstedt site due to closure of business Kfsdstz S D Uspfx Aa Esa compact, easy to set up and operate Wire-O closing machine incl. 2 tools

Condition: new, Year of construction: 2025, Planer: Working table dimensions 400 x 1800 mm Cutting block diameter 70 mm Shaft rotation speed 5700 rpm The dimensions of the knives 400 x 20 x 3 mm Max. 4 mm table adjustment Thicknesser: Working table dimensions 400 x 760 mm Feed speed 7 m / min Kfedpfxog S Nx De Aa Eja Working height 4 - 220 mm Bohring agregate: Working table dimensions 250 x 500 mm Longitudinal / transverse / vertical travel 205/95/90 mm Spindle (M18 * 1.5-S) 0-16mm General parameters: Three-phase motor power 4.0 - 3.0 HP - KW Weight 410 kg Machine has spiral roller Machine is extremely efficient and accurate. The cast iron structure of the body allows for safe and effective processing of even large elements.