Heidelberg SM52-5-P (2000)

Heidelberg SM52-5-P

Condition: good (used), Offer consisting of: Heidelberg Speedmaster SM52-5P3, CP1.04, Autoplate, washing devices, 125 million impressions, perfecting unit operational!, immediately available Rbodpfxsw Ixtde Acvew

Year of construction: 1977, condition: used, Weiler Matador VS2 lathe year ca.1977 with collets , collet tube , three-jaw chuck , Multifix. Guide in the front area shrunk. Machine in a ready to use condition , After consultation under power ready for demonstration. Rsdpfx Asmdn Dxjcvsbw

Condition: used, Year of construction: 2005, functionality: fully functional, Horizon BQ-270 (2005) 1 Clamp Perfect Binder / Binding Type: Hot-melt Book Block Size (Paper Size for Book Block): Maximum: 320 × 320 mm / Minimum: 135 × 105 mm Book Thickness: 1 – 50 mm Cover Size: Maximum: 320 × 660 mm Minimum: 135 × 230 mm Suitable Cover Paper Weight: 70 – 260 gsm Maximum Cover Pile Height: 70 mm Production Speed: Up to 500 cycles per hour Power Requirements: AC 200 V, 3-phase, 50/60 Hz Heater Power: 2.2 kW Machine Dimensions: 2,300 (W) × 860 (D) × 1,250 (H) mm Machine Weight: 900 kg Rbsdpfxjxyua Ne Acvsw

Condition: used, Year of construction: 2005, The Sakurai 466 SIP, manufactured in 2005 and bearing serial number HF113105, is a four-color offset press with a maximum sheet size of 470 x 660 mm and a total of 25 million impressions. Currently in operation at a printshop in Germany, this press is equipped with the DTC Delivery Top Console featuring a touch screen and full remote-control operation. It incorporates advanced automation systems such as SIS (Sakurai Interactive System) for make-ready, SAS (Sakurai Auto Set) for paper size and thickness adjustment, and SPC (semi-automatic plate change), along with a plate running register system and cocking register for precise alignment. Rbedpfoxa Eamex Acvjw The press is fitted with automatic washers for blanket cylinders and inking rollers, Olivermatic dampening, and a Baldwin refrigeration and Bal Control system to ensure consistent print quality. Its feeder includes a suction-belt feed table with electronic double sheet and side lay detectors, while the chromed impression cylinders enhance durability and performance. The machine also features a perfector for 4/0 or 2/2 printing with full automation, semi-high pile delivery, and a powder spray system. Included with the press are a plate punch, compressor, tools, and manuals, making this Sakurai 466 SIP a complete and well-equipped solution for high-quality, efficient offset production. Format: 470 x 660 mm Equipment: Console DTC (Sakurai Delivery Top Console) with Touch Screen. Full Remote Control Operation : SIS (Sakurai Inter Active System) for make ready Plate Running Register system SAS (Sakurai Auto Set) for Paper size and thickness SPC (Semi-automatic Plate Change) Cocking Register Automatic Washers: Blanket Cylinders & Inking Rollers Olivermatic Dampening Baldwin Refrigeration System & Bal Control Feeder with Suction-belt feed table Electronic Double Sheet & Side lay Detector Chromed Impression Cylinders Perfector 4/0 - 2/2 (Full automatic) Semi-High Pile delivery Powder Spray Including: Plate Punch, Compressor Tools and Manuals

Condition: used, Year of construction: 2003, functionality: limited functionality, paper width (max.): 500 mm, paper height (max.): 350 mm, Ryobi 525 HXX – 5-Colour Offset Printing Press Year of manufacture: 2003 Number of impressions: approx. 103 million Colours: 5 Max. printing format: 35 x 50 cm For sale is a well-maintained Ryobi 525 HXX 5-colour offset printing press from 2003. The machine is fully operational and currently still in production. It has mainly been used in our facility for envelope printing and has therefore been operated gently, experiencing minimal stress from typical commercial print jobs. Condition & Notes: - Machine is production-ready - Service recommended for: Rbedpfx Acjymlmzovsw - 16 ink zone screws - Technotrans unit (partially leaky) This press is ideal for printing companies seeking a reliable 5-colour quarter-format machine, suitable for commercial printwork, envelope printing, or special productions. Inspection under power possible by appointment. If you are interested, we look forward to your enquiry.

Condition: ready for operation (used), There are two identical machines available, machine 1 is missing the table, machine 2 needs service, both are functional, working width: 1800mm, table length: 16,000mm, with documentation, an on-site inspection is possible. Rodpfeq T Sinox Acvobw

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. Rjdpfx Ajuf Sy Ajcvsbw The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Year of construction: 1998, condition: ready for operation (used), Steel saddle stitcher ST 100.1, year of manufacture 1998 1,223 operating hours. Manual system (expandable to 2) 4 double feeders Stitching station with lateral measuring control 2 Hohner 52/8 standard stitching heads 2 Hohner 52/8 eyelet stitching heads Lateral measuring control Rbodsq Rw Exepfx Acvow Three-knife trimmer with center cutting device transfer marking table shingle delivery 2 pumps documentation

Year of construction: 2002, condition: good (used), Built in: 2002 Working hours: 10.688 thsd.h Size: max 365 x 305 mm min 105 x 115 mm Product thickness: max 15 mm min 6 mm Speed: max 9.000 c/h min 2.000 c/h Equipment: gathering chain & feeder • 10 station gathering track & chain • 10 automatic feeders • 1 cover folder feeder 1528 stitching unit • wire unwind device • stitch control • 2 stitching heads HK 75 three knife trimmer • three knife trimmer 1522 knives Rodpfx Asd R Sanocvsbw • 2 sets of knives

Year of construction: 1971, condition: good (used), decoiler - expansion mandrel with coil lifting table strip width: 1.200 mm strip thickness: 0,3 - 5 mm Rbsdod Ha E Sepfx Acvew coil weight: 10 t mandrel Ø: 508 mm