Low loader trailer

HACO, MÜLLER, EBU

Condition: used, Thread rolling machine ORT RP30U 2-roll 30 ton swiveling heads Gjdpst H Ty Uefx Admsil variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Power (Ton): 30 Number of rollers: 2

Condition: used, Thread rolling machine ORT RP18 2-roll Spindles diameter 69.95mm Giedpfxot Apuge Admjl See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy Power (Ton): 18 Number of rollers: 2

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 490 mm, spindle bore: 155 mm, center height: 400 mm, turning length: 3,000 mm, spindle speed (max.): 1,250 rpm, spindle speed (min.): 6 rpm, bed width: 700 mm, Turning diameter in gap: 1,050 mm, rotational speed (max.): 1,250 rpm, overall weight: 7,500 kg, three-jaw chuck diameter: 630 mm, ZMM Lathe CU800x3000, 2011, very little used, in excellent condition Specifications: Swing over bed: 890 mm Distance between centers: 3000 mm Spindle bore: 155 mm Bed width: 700 mm Spindle speed: 6.3–1250 rpm Weight: approx. 7500 kg Compliant with ARBO/CE Machine equipped with: • 2-axis digital readout • BISON 3-jaw chuck 630 mm • BISON 4-jaw independent chuck 800 mm • 2 x fixed steady rests with roller fingers • 1 x travelling steady rest • Electrically adjustable tailstock • Tool post with 4 holders Godpfsxyf Ecex Admoil • Coolant system • Machine lighting

Condition: used, Year of construction: 2003, Thread rolling machine ESCOFIER H20Z 2-roll 2 moving heads (in sync) 2 - 20 Ton rolling pressure workpiece diameter: 75mm max. tool diameter: 140-200 mm Max plunge width 160 mm Gisdpot Hmv Nofx Admjl Shafts dia: 69.95 Swivelling: +/-6°, New: 2003 under power in our warehouse, M i M u machine tools

Condition: good (used), 4 x eccentric press Ebu / Weingarten consisting of the following types: 1 x Ebu 15 1 x Ebu 25 2 x Ebu 35 Godpsq Rdr Tefx Admjil 1 x Weingarten A 40 The machines can be inspected on site.

Condition: good (used), pressing force: 50 t, stroke length: 320 mm, Capacity 50 Ton Throat 225 mm Adjustable stroke 8 - 100 mm Number of strokes 320 p/min Ram size 300 x 280 mm Table size 500 x 800 mm Giodjtt A T Tspfx Admel Machine LxWxH: 160 x 120 x 260 cm Machine weight: 6 Ton

Condition: excellent (used), Eccentric press Inv. no. 3413 Fabr. ter Hart Type EP 25 Pressing force: 25 tons * Stroke adjustment: 6 to 60 mm * ram adjustable 35 mm * Table dimensions: 360 x 320 mm Godpfjttw Emjx Admjil * Installation height: 275 mm * Projection: 175 mn * Foot operation * Connection: 1.5 kW * Weight: 850 kg.

Condition: refurbished (used), Thread rolling machine ORT RP18 B 2-roll overhauled LOW PRICE The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy Power (Ton): 18 Gsdpfxewwmiye Admoil Number of rollers: 2

Condition: used, Year of construction: 1968, Gewinde-Ø 52 mm threading length 500 mm thread pitch entsprechend Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen voltage 380 V / 50 Hz main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with driven workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder, size: Z52/2B, + 21B • 5 sets of chaser jaws, pitch 1 - 2,5 mm Machine is in a good condition. Gedpfxov N N Scj Admoil

Condition: good (used), Year of construction: 1962, machine/vehicle number: 5601062, Offer 24287 Technical data: - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm - Table height adjustable - Drop-through hole in table approx. 300 x 200 mm - Maximum installation height approx. 360 mm Gisdpou Ilkiefx Admol - Plunger surface approx. 340 x 160 mm - Pivot hole in plunger 40 mm - Plunger adjustment 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - Rotary wedge clutch - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 3500 kg