GALEN Coil Tong

GALEN Coil Tong

Condition: new, Year of construction: 2021, Layout: Round bale grab Empty weight: 7.500 kg Attachment suited for: Lifting equipment Capacity: 32 M.T. Jaw Aperture(min-max): 160mm/2400mm Jaw Teeth Length: 200mm Open/Close Time: ~7,5 sec Axial Rotation Time: ~30 sec Axial Rotation Time: 270° Weight: 7500kg Crane Hook Type: DIN 15401 No:40 hook Ambient Temperature: 45 ºC Csdpopa Rmkofx Ad Iohc Max. Coil Temperature: 1100 ºC Energy Supply Voltage: 400 VAC, 3 Faz, 50 Hz

Condition: used, Saw BEHRINGER HBE 321 A Dynamic Cedpfxsx Tvkxo Ad Ijhc

Condition: used, functionality: fully functional, Year of construction: 1997, 2 units Figee overhead crane, 35 tons, with swiveling hook, span approx. 18.60 m, and one unit approx. 21 meters, lifting height 10 meters. Chsdpfew S D Izex Ad Ioc

Condition: used, Year of construction: 2000, Manufacturer: STAM Model: Stam 2000-3 Year: 2002 Condition: Used Stock number: 0395 Uncoiler – max. weight (ton): 30 ton Uncoiler – max. width (mm): 2,000 mm Uncoiler – min. width: 400 mm Uncoiler – outer coil diameter: 1,800 mm Uncoiler – hydraulic expansion: 508 mm min. 610 mm max. Chsdpfx Adsywd Aks Ijc Straightener – strip width: 2,000 mm Straightener – max. strip thickness: 3 mm Straightener – min. strip thickness: 0.6 mm Straightener – number of rolls: 17 Straightener – roll diameter: 46 mm Electronic feeder – min. pitch: 250 mm, max. pitch: 4,000 mm.

Condition: excellent (used), functionality: fully functional, strip width: max. 1.600 mm strip thickness: 0,4 - 3 mm No. of strips: max. 11 coil weight: max. 25 t coil OD: max. 2.000 mm mandrel Ø: 508/610 mm year: 1990/2002/2006/2016/2019 Codpfxsy Nypko Ad Iohc

Condition: good (used), Year of construction: 2018, Flame-Cutting and Drilling System Plate Processing Center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of Manufacture: 2018 CNC Control Power Source: Kjellberg HiFocus 360 Plasma Cutting for Material Thickness: 5 to 50 mm Spindle Speed: 160 – 4,000 rpm Automatic Tool Changer Tool Holder Capacity: 14 Drive Power: 16 kW Drilling Diameter: 5 - 40 mm V-Scoring Marking: 5 to 40 mm Sheet Metal Dimensions min.: 1,500 x 300 mm (750 x 400 mm with limitations) Minimum Dimensions of Finished Parts: 80 x 80 mm Sheet Metal Weight max.: 2,600 kg and 650 kg/m Infeed Side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-point transfer conveyor Number of Carriages: 2 with clamps Chjdpfxsvzrcze Ad Isc NC feed carriage, positioned on the side 4 Clamping Jaws (2+2) 3 Short-stroke Transfer Conveyors Working Height: 1,000 mm Outfeed Side: Outfeed roller conveyor with a lowerable discharge table and slide into a material collection bin for unloading small parts. Filter unit incl. piping High-performance for use with carbide tools. For drilling, tapping, marking, milling, and plasma cutting of flat steel and sheet metal. Software options for milling and marking LANTEK license 51026ä Availability: immediately!

Condition: good (used), Year of construction: 2018, MACHINE STRUCTURE 2500X12000mm HEXA GV500 NUMERICAL CONTROL HEIGHT CONTROL PLASMA BEVEL HEAD 6-TOOL REVOLVER ISO30 DRILLING MACHINE INCLUDED: HYPERTHERM 400A GENERATOR NEW Codpfx Adoq Abwps Iehc WARRANTY 6 MONTHS

Condition: new, cutting diameter 250 mm saw band length 3150 x 27 x 0,9 mm table height 750 mm cutting width 170 x 310 mm cutting speed 25 - 90 m/min 130 mm 130 mm 205 mm Impact energy 205 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions 0,95 x 1,16 x 1,98 m Solid band saw - Double miter cuts on the right up to 60°, on the left up to 45° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material stop max 600mm Chodpfxspam E Rs Ad Ijc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, total length: 16,240 mm, load capacity: 5,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, 2 Abus overhead cranes – Type: single-girder – Capacity: 5,000 kg – Lifting height: 6 m – Year of manufacture: 2012 – Hoist type: wire rope hoist – FEM/ISO hoist classification: 2m/M5 Dimensions – Span: 16,240 mm center-to-center – Installation height: 560 mm – Wheelset width including bumpers: 3,210 mm – Wheelbase: 2,700 mm – Suitable for crane rail: 50×30 mm – Dead weight: 3,690 kg Speeds – Hoisting: 5/0.8 m/min (2 speeds) – Trolley travel: 20/5 m/min (2 speeds) – Crane travel: 40/10 m/min (2 speeds) Features – Control: wired push-button panel with load display – Crane manual available: yes – Last maintenance: May 2026 – Condition: in good condition, dismantled but operational – Dismantled: no; October 2026 – 2 units available Steel structure including floor slabs and column-mounted slewing crane – Length: 32.5 m (approx.) – Year of construction: 2012 – Condition: in good condition – Dismantled: no; October 2026 Dimensions – Total length: 32.5 m (approx.) – Width (center-to-center) of crane runway: 16,240 mm – Total width: 16.7 m (approx.) – Distance from floor to top of 50×30 mm beam: 6,200 mm (approx.) – Column spacing: to be confirmed – Crane runway: HEA 260 – Columns: HEA 260 Chjdpfx Aoz Eruljd Isc – Crane beam: 50×30 mm Includes – 16 x HEA 260 columns, height approx. 5,914 mm – Cross-braces – Floor slab measuring approx. 4.5 x 16 m – Floor slab measuring approx. 4.0 x 6 m – Column-mounted slewing crane with a lifting capacity of 1.6 tonnes

Condition: good (used), Year of construction: 1997, operating hours: 30,475 h, functionality: fully functional, machine/vehicle number: 8277, total height: 3,355 mm, total length: 6,200 mm, total width: 3,920 mm, input voltage: 400 V, type of input current: three-phase, UNISIGN CNC bed milling machine UNIVERS 5, year of manufacture 1997 Control system: Siemens 810 MGA 3 X-axis travel: 4000 mm Y-axis travel: 750 mm Z-axis travel: 400 mm Feed rate: 5 - 28,000 mm/min Rapid traverse rate X-axis: 28,000 mm/min Rapid traverse rate Y-axis: 28,000 mm/min Rapid traverse rate Z-axis: 28,000 mm/min 51 tool changer positions SK 40 DIN 69871 A / ISO 7388-1 T-slots 1 x 18H9 / 4 x 18H12 T-slot spacing: 130 mm Maximum table load: 1,000 kg 400V / 3 phases / 50Hz / 60A Chsdpeylbf Refx Ad Iec Power consumption: 40 kW Air pressure: 6 bar - 20 ltr/min Number of leveling elements: 8 pieces Operating hours: 30,475 hours Dimensions: 6200 x 3920 x 3355 mm Weight: 12,000 kg