Imperia

G. Rabolini srl. Imperia D (85x120cm)

Condition: used, Year of construction: 2024, Cloth cutter Kolbus: KS 601 Year: 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Standard equipment: - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Special equipment: - cross cutting module and split cutting module with 10 circular knives - deposit delivery Material width: Max 1.600 mm Maximum cutting width: 1524 mm Minimum cutting width: 50 mm Maximum length of cut: max. 1.100 mm (for length and cross cutting) Psdsvqbhlspfx Aicora Minimum length of cut: 100 mm Material roll diameter: 500 mm Max. mechanical speed: 50 cuts/min Net performance depends on material, format, ... Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: ready for operation (used), Year of construction: 2014, A hot stamping system is available for hot stamping the silver edge on instrument panels. Heating capacity: 5.6 kW, stamping force: 20 kN, max. pressure: 6 bar. Including laminar flow module Spetec Super Silent. Documentation available. On-site inspection is possible. Pedpjuyk S Aefx Aicora

Year of construction: 2013, condition: used, Sewing machine Psdpormyp Rsfx Aicsra Müller Martini Ventura MC (3215) Year: 2013 Description: - Colour monitor with touch screen - Semi automatic setting - Feeder - ASIR Automatic Signature Image Recognition: Asir III - 2 + 2 opening possibilities - Book block separator - Book stacker - Roller table delivery - PIAB/Venturi

Condition: used, Year of construction: 2011, Sewing machine Meccanotecnica Universe Year: 2011 For high quality digital print finishing. The UNIVERSE SEWING performs 3 operations in standard mode: Sheet feeding, creasing, folding and collating and stitching. Configuration: • flat sheet feeder • pc Siemens with touchscreen • GigaLynx sheet control Prodex Sybfopfx Aicea • folding and collating station • thread sewing machine • belt delivery (counter approx. 9.700.000 mio. stitches) Technical specifications: speed plano sheet feeder: up to 300 plano sheet(A4)/min mechanical stitching speed: up to 50 folded sheets/min size range plano sheet max.: 420 x 640 mm size range plano sheet min.: 150 x 200 mm size range folded sheet max.: 420 x 320 mm size range folded sheet min.: 150 x 100 mm number of stitches max.: 10

Condition: new, Year of construction: 2025, Model: C3T Working Area: 3048mm*1524mm Laser Output Power: 6000w/3000w/2000w/1500w Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 100m/min Max. acceleration: 1G 1. Double Fast Exchange Tables Fast exchange of two tables greatly improves efficiency. Chain-drive system has better rigidity and higher accuracy, saving feeding time. 2. Tenon-and-mortise Welded Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Prjdpfx Aeg D Nz Roicoa Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets.

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed Psdpjt Rmhasfx Aicjra - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Equipment: brochure finisher, Equipment: Counter Color: 3,469,135 B/W: 881,076 Fiery Color Controller E-43-A Vacuum Feed LCIT RT5100 Finisher SR5050 Buffer Pass Unit Type S3 Scanner Monitor, Keyboard, Mouse The Ricoh Pro C7100S is a powerful digital printing system for professional production printing, combining impressive offset-like quality with high speed (up to 80 pages/min), flexible media handling (up to 360 g/m²) and an integrated scanner, making it ideal for demanding print service providers. Reliable High-Performance Production The Ricoh Pro C7100S is the ideal solution for print shops, agencies, or in-house print departments that want to take their productivity and media versatility to the next level. With a constant printing speed of up to 80 pages per minute (in color and black and white) and a maximum monthly volume of up to 240,000 pages (duty cycle up to 700,000 pages), this system delivers maximum efficiency for both small and large print runs. Excellent Image Quality Thanks to the modern VCSEL laser technology and a resolution of up to 1,200 × 4,800 dpi, you get razor-sharp text, the finest color gradations, and accurate image reproduction. The advanced PXP-EQ toner process expands the color gamut and ensures that the first print is just as brilliant as the last. Includes Color Controller (Fiery) Equipped with an external/integrated Fiery Color Controller (e.g., E-43A / E-83A) for seamless integration into your workflow. Enables professional color management, RIP acceleration, and easy handling of variable data printing jobs (VDP). Technical Data at a Glance: - Model: Ricoh Pro C7100S (MFP / incl. scanner) - Printing Technology: Laser / 4-color printing system - Speed: 80 pages/minute - Max. Paper Size: A3+ (oversize) - Paper Weight: 52 to 360 g/m² - Max. Paper Capacity: Up to 16,200 sheets Prjdozbyh Aspfx Aicea - Dimensions (W x D x H): 1,320 × 910 × 1,218 mm - Weight: approx. 580 kg Subject to prior sale and errors.

Condition: good (used), Year of construction: 1997, punching force: 350 t, overall weight: 4,500 kg, input voltage: 380 V, input frequency: 50 Hz, Die cutting press TMZ Type L122, year 1997, format 93x126 cm, punching force 350 tons, speed 1400 cycles/hour, quick-clamping frame, safety foot mats, in good condition, immediately available. Prjdpfx Aex Dilhsicea

Condition: good (used), Year of construction: 2006, functionality: fully functional, StitchLiner5500 - saddle-stitching system which flat sheet collating, scoring, folding, stitching and three-knife trimming in line. Line with: 2 Collator tower VAC 100 – (total 20 bins). Stacker/By-pass Unit: ST-40 Conveyor ST-CV Accumulator/Folder : ACF-30 Saddle-stitcher: SPF-30 Predpfovzgy Usx Aicea Three-knife Trimmer: HTS-30 Options: 4 Stitching Head Center-Cut Device Additional Loop Stitching Kit Available Immediately - Can be inspect in production

Condition: used, functionality: fully functional, Wohlenberg 44 FS 50 automatic three-knife trimmer. Complete with accessories. Prsdjxdm Dbjpfx Aicea