Transport trolley

Edelstahl für eine Pumpe

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Iodpfx Aed N Rb Dom Ioia Drilling front heads on each side included Very good condition. Available immediately.

Condition: good (used), working width: 1040 mm metal sheet thickness: 1,25 mm upper roller-Ø: 56 mm below roller-Ø: 56 mm Iodpedt Dqwefx Am Ijia weight: 190 kg space needed: 1450 x 460 x 1030 mm

Condition: used, Year of construction: 1999, Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018.  List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP balls PT100 3. Wort Copper Made by FRACCHIOLLA in 2018 Heated by steam Cleanning balls Temperature sensor Transfer pump from Alfa Laval Solid C-2 (3 kW) 4. Whirlpool Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1250 mm Volume: maximum 40 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (2,2 kW) 5. Hot Water Tank Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 2700 mm Volume: maximum 85 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (7,5 kW) Heated by steam with temperature regulation 6. Heat Exchanger Made by MDC (France) Plate heat exchanger double zone model: RDC 307 Capacity: 30 Hl/h from 85°C to 16°C 7. Ice Water Unit Capacity: 1000 l New pump Ijdpfxol Hxmdo Am Ijia

Condition: used, gr. working width: 1100 mm for sheet thickness (steel sheet) up to approx.: 1 mm Iisdpfjcaxvhox Am Iea electr. drive: 380 V, 0,75 kW space requirement: 2330 x 600 x 1140 mm weight: 357

Condition: used, Year of construction: 2014, Overview  This 20HL brewhouse was built in 2014 by Spanish manufacturer INOX DUBRA. It can be visited at any time.    Technical Details Rash wort: 20 HL  Steam heated   Electric panel to control both pumps and heating temperature  Opening of valves done manually   Scope 2 vessel brewhouse   1x water tank 3300L with cooler   Heat exchanger  Accessories as different hoses, two pumps, etc.   Iijdeukafxspfx Am Iea

Year of construction: 2003, condition: ready for operation (used), Capacity: 9350l, output: 180hl/h, max. operational overpressure: -1 to 4bar, operating temperature: 0-100°C, medium: beer, weight: 2t, with documentation, an inspection is possible, without mixing tanks and zip tanks. Iiedpfx Amjrl S Hxo Iea

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller Iiodpfxjhx R Eto Am Ioa - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: used, working width: 1020 mm Iisdpfjda I Itox Am Iea metal sheet thickness: 1 mm upper roller-Ø: 55 mm below roller-Ø: 55 mm space needed: 1370 x 570 x 1100 mm

Condition: used, gr. working width: 1040 mm Folding width approx.: 12 mm for sheet thickness up to approx.: 1 mm Iiodpecaxtxefx Am Iea Drive motor, gear brake motor: 380 V, 0,55 kW space requirement: 1300 x 480 x 960 mm Weight: 334 kg

Condition: excellent (used), Year of construction: 2014, Heat exchanger, construction heating, construction dryer, heating, hall heating, hot water exchanger, fan heater, heating, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil Iijdjghh Txepfx Am Iea -pure heat exchanger, only usable in conjunction with a heating unit (e.g. Wacker Neuson HP 252) -Type: HX 60 -Power: 43.5 kW -Quantity: 8 pieces available -Price per piece -Dimensions: 660/720/H1065 mm -Weight: 106 kg