Angle grinder

Desoutter KA26085B7V

Condition: new, sheet width 1270 mm plate thickness 2,0 mm distance between columns 1300 mm daylight opening 48 mm 135 ° total power requirement Handbetrieben weight of the machine ca. 0,4 t dimensions of the machine ca. 1,6 x 0,9 x 1,2 m Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm. Nljdpfx Aeupxcgsc Aog

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Nljdpfx Aoxfrv Eec Ajg Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, Year of construction: 2026, CORMAK WL3000 laser welding machine is a professional 3-in-1 device with a power output of 3000 W, designed for laser welding, cleaning, and cutting. It has been developed for industrial plants and workshops requiring reliability, precision, and high operating efficiency. Thanks to fiber laser technology, the machine provides exceptional beam stability and enables processing of a wide range of metal materials while maintaining a minimal heat-affected zone. Main advantages of the machine Maximum power of 3000 W – increased penetration depth and higher welding speed. Water cooling system – ensures stable operating conditions during continuous operation. Ergonomic welding head – lightweight and flexible, with adjustable spot size from 0–5 mm and interchangeable nozzles. Automatic dual wire feeder – integrated with the control system. Welding speed up to 215 mm/s – up to 10 times faster than traditional methods. Ability to process thin materials – for example stainless steel with a thickness of 0.5 mm. Operating modes: continuous / modulated – full control over weld parameters. Welding with or without wire – versatile technological solution. Cleaning and cutting functions – expanded range of applications. Design and technology The machine is based on a fiber laser source with a wavelength of 1070 nm and a 10 m fiber optic cable. Thanks to its compact housing and integrated connections for shielding gases and cooling systems, the CORMAK WL3000 ensures safe and efficient operation. The high-power welding head enables welding at various angles, while the optical system guarantees excellent beam quality and stability. Precision and work efficiency Nedpfxekkbw Ue Ac Aslg The CORMAK WL3000 laser welder enables fast and repeatable welds without the need for additional finishing operations. Due to the small heat-affected zone, the material structure remains unchanged. Low levels of reflected radiation improve operator safety while maintaining excellent final weld quality. Applications Industrial and manufacturing plants Metalworking, automotive, and HVAC industries Laser welding, cutting, and cleaning of metals: mild steel, stainless steel, aluminum, brass Production of lightweight structures, railings, housings, and precision components Standard equipment Laser welding machine with water cooling system Welding head with focal length adjustment MaxPhotonics laser source Automatic dual wire feeder Connection cables Starter set of nozzles and protective lenses Optional equipment Optical kit for laser cleaning – PLN 1500 net Technical specifications Parameter Value Maximum laser power 3000 W Laser wavelength 1070 nm Fiber optic cable length 10 m Operating modes Continuous / Modulated Shielding gas flow rate 10–15 L/min Welding speed 0–215 mm/s Automatic wire feeder Ø 0.8–2.0 mm Maximum power consumption ≤11.0 kW Focal length 150 mm Cooling system Water cooling Operating voltage 400 V Shielding gas consumption Approx. 10–12 L/min per wire diameter Dimensions 600 × 1100 × 1100 mm Approximate weight 207 kg

Condition: new, functionality: fully functional, Year of construction: 2024, control type: manual, working width: 1,270 mm, folding beam adjustment: 46 mm, bending angle (max.): 135 °, sheet thickness (max.): 2 mm, back gauge adjustment: manual, back gauge: 760 mm, overall weight: 380 kg, total length: 1,600 mm, total width: 850 mm, total height: 1,175 mm, Equipment: documentation/manual, Top and bottom blades removable in segments Includes manual backstop PNEUMATIC CYLINDER!!! Max. bending capacity over the entire working length ----- 2 mm Max. working length ----- 1270 mm Max. opening width ----- 46 mm Nledega T A Ijpfx Ac Ajg Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 275 mm Max. bending angle ----- 0 - 135 degrees Weight ----- 380 KG Width ----- 1600 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: new, bore capacity in steel (diameter) 30 mm throat 250 mm bore stroke 130 mm spindle taper MT 3 MK table: 380 x 380 mm column diameter 98 mm turning speeds 75 - 3200 U/min feeds mm/U total power requirement 1,1 kW Nledsu Imc Hepfx Ac Asg weight of the machine ca. 220 kg. range L-W-H 0,5 x 0,6 x 2,05 mm Gear drill Thread cutting device Left/right barrel Tilting work table. Lighting. 2 electric Speed levels. Depth stop. Gears run in oil. Packaging dimensions: 2100x400x710mm Weight 260kg

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Nlodeyhd Imspfx Ac Ajg Specifications: Power: 11 kW

Condition: new, sheet width 915 mm plate thickness 1,0 mm distance between columns 920 mm 135 ° total power requirement Handbetrieben weight of the machine ca. 96 Kg Nlodpfeupxf Iox Ac Aeg dimensions of the machine ca. 1170 x 400 x 480 m Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.

Year of construction: 2024, condition: as good as new (ex-display), Rim Balancing Machine: - Automatic clamping of a wheel hub with a heavy duty pneumatic clamping chuck Nljdpfx Acet Tuqbj Aog - Automatic brake and wheel positioning - Fast balancing cycle time - Made of well-known brands heavy duty components - Fast tool changeover time - Servomotor as a spindle drive motor

Year of construction: 2018, condition: reconditioned (used), Conveyor belts Belt width 650 mm, 800 mm, 1000 mm, 1200 mm, 1400 mm. Length over 70 m Nodpfx Acou N Ndve Aolg Optional service aisles Rollers Motor

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable Nedoxabpwepfx Ac Aelg - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device