Used woodworking machinery for sale (19)

Condition: excellent (used), Year of construction: 2013, Brandt Highflex KDF 220 edge banding machine with joining, corner copying, and two trimming blades. Highly automated. A video of the machine in operation can be sent upon request. Edge thickness range approx. 0.4 - 3mm, solid edge up to 6mm Workpiece height approx. 10 - 60mm Feed speed approx. 10m/min Noise protection hood Extendable workpiece support Dust extraction connection 1x120mm, 1x100mm, 3x80mm Easy-Touch control panel EC+ for easy machine operation 4 programs can be stored. Machine in Highflex version, highly automated, switching from thin edge to thick edge via programs Units: Extended infeed zone Chain track central lubrication, pneumatic manual Glue pot quick-change device, currently one glue pot available Top pressure manual adjustment, PU rollers Infeed guide manual adjustment with SIKO counter for chip removal Joining milling cutter with diamond milling cutters, sharpened Contact heating shoe for preheating the panel Gluing section with automatic edge feed for roll material up to 3mm, switchable for co-rotating and counter-rotating operation Pressure zone with 3 rollers, pneumatic adjustment between thin and thick edge Cut-off saw with 2 motors, straight cuts or bevel cuts (program adjustment) Combination milling unit, pneumatically controlled for flush trimming, chamfer and radius Gbjdpfx Aozzqwmsciot Corner rounding milling cutter R2 with diamond milling cutter with integrated sensing ring Radius trimming blade R2, pneumatically retractable with quick-change device Glue joint trimming blade with large roller, pneumatically controlled Hood locking CE marking All indexable inserts of the milling units and the trimming blades have been renewed or re-sharpened, saws sharpened, diamond joining milling cutters sharpened. The machine is therefore ready for immediate use. Only the diamond milling cutter of the profile milling unit has not been renewed, but it is still sharp. Original paint, only a few spots have been touched up. Unfortunately, the machine does not have an operating hour counter, but it still looks very good visually. Very good condition, see original photos. Machine dimensions approx. 4550 x 1250 x 1550mm (LxWxH) Weight approx. 1400kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: excellent (used), Year of construction: 1995, Combined planing and thicknessing machine by Hofmann, featuring the legendary Leitz-Wigo spiral cutterhead, very robust machine construction in a compact design. Special feature of this machine: For thicknessing, the planing table does not need to be folded up, so no conversion is necessary. Equipped with a "genuine" spiral cutterhead. Planing width approx. 620mm Thickness table electrically adjustable with digital display, fine adjustment via handwheel serrated steel infeed roller rubber-coated outfeed roller, new Planing height approx. 4 - 240mm 2 feed speeds 7 + 14 m/min Table length 2520mm Drive motor 5.5kW with automatic motor brake 2-knife cutterhead with spiral, resharpenable HSS knives Two sets of spiral knives are included, each mounted in matching pressure blocks. Resharpening is done by a sharpening service, and the sharpened knife sets are then easily screwed into the cutterhead without any adjustment work. Slotted table lips Cutterhead guard Suvamatic Fence swiveling with guide rail Hollow and pointed rabbeting adjustment of the planing tables Rod for hanging the dust extraction hood Dust extraction connection 2 x 160mm Only a few touch-up spots V-belt renewed Knives sharpened Rubber outfeed roller renewed Operating manual CE marking Gbsdoztkyxopfx Acijt No scratches on the tables. Thickness table with two adjustable table glide rollers Dimensions approx. 2520 x 1200 x 1200mm (LxWxH). Weight approx. 1300kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in stock in our warehouse, see "other offers from this provider".

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trimming blades. A good entry-level machine with comprehensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed speed: approx. 8 m/min Noise protection hood Gjdszn Afpspfx Acisbt Extendable workpiece support Dust extraction connection: 1x100mm, 4x80mm, including the depicted ducting to 200mm Easy-Touch control with color screen for easy operation of the machine 10 programs can be saved Units: Upper pressure: manual adjustment with crank and SIKO counter Infeed guide: manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened Total of 2 interchangeable glue tanks for quick color changes from white to transparent Gluing section with automatic edge infeed for roll material up to 3mm Pressure zone with 3 rollers Miter saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering, and rounding Corner rounding cutter R2 with diamond cutter, 1 motor-driven Radius trimming blade R2, manually adjustable Glue seam trimming blade with large roller, pneumatically controlled Hood locking CE marking Operating manual as a folder All indexable inserts of the milling units and the trimming blades have been renewed or re-sharpened; saws have been sharpened; diamond joining cutters have been sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the shaping cutter has not been renewed, but it is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses have been renewed. Approx. 1200 operating hours, i.e., only 1/2 hour per day. Machine dimensions approx. 4300 (with table) x 1250 x 1600 mm (LxWxH) Weight approx. 950 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "other offers from this supplier."

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide-belt sanding machine with electronic segmented sanding pad and finish sanding. Ideal sanding machine for interior finishing companies, also suitable for intermediate sanding before painting. Edge sanding machine with combination unit and electronic segmented pressure bar, edge segments can be switched on and off. Segment width of the pressure bar 35mm. Contact roller pneumatically adjustable, low wear due to ribbed steel roller. Grain size compensation. Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s. Gbedpfx Aezqvmrecist Belt feed steplessly adjustable via frequency inverter from 2.5 - 13 m/min. Pneumatic workpiece-controlled belt blowing device. Cleaning brush at the outlet. Constant working height of 900mm by adjusting the top part of the machine, thus also integrable into sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340mm. Workpiece height approx. 3 to 150mm. Common sanding belt dimension 1360 x 1900mm. 3 rubberized pressure rollers. Infeed roller table and foldable outlet table. Preparation for vacuum blower. The belt is perforated and connectors for optional blower are available. Alternatively, the belt can also be connected to the extraction system. Extraction connection 1 x 200mm, 1 x 140mm and 2 x 100mm. Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar engagement points at the front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking. Operating manual. Without the illustrated connection cable. Original paint, only retouched in places. Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg. The machine can be demonstrated on-site after prior arrangement. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, shaping, form veneering, edge banding, etc. With some limitations, you can certainly do without a hydraulic veneer press with this press. New heat-resistant silicone membrane, extremely flexible and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or solid surface materials. Frame inner dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with a capacity of 40 m³/h and two vacuum tanks of 200 liters each, ensuring comfortable operation and rapid evacuation. Gbodpfx Asy Hl Hpjciet Electronic vacuum pressure switch, which switches off the pump when the target negative pressure is reached, preventing continuous operation. Movable on four swivel casters, lockable. Frame can be easily folded up and is locked with two bolts. Double frame for quick replacement of the membrane. A new silicone membrane is currently installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Original paint, some areas have been retouched. The silicone membrane and the base plate have been renewed; the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020mm (LxWxH). Weight approx. 550kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, woodturning lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs for turning and milling operations can be stored. Hydraulic copying of a pattern or template. The roughing and copying tools are equipped with fine adjustments. Template adjustment is possible from the front and rear via fine-pitch spindles. The copying length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within each stage, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 rpm Speed stage 2: 350 - 3400 rpm Distance between centers approx. 1550mm Copying length with steady rest approx. 1350mm Bed length approx. 2100mm Feed adjustable continuously, rapid traverse with safety end stop. Hydraulic copying slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release mechanism. Extensive accessories: Ring steady rest with front turning tool and insert guide. Four-jaw steady rest. Four-jaw chuck 125mm. Copying tools, center points, hexagonal drive, etc. Milling unit with 3kW motor for mounting on the copying slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Gjdpfxjzfwm Ns Acijbt Original paint, only a few spots have been touched up. Very good condition, from a small carpentry workshop. The machine was apparently not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site upon prior appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider."

Condition: excellent (used), Year of construction: 2000, Robust oscillating milling machine T 26, swiveling from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Swiveling angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When the height is adjusted, the correction factor for the swiveling angle is displayed in the upper display, which is then set on the stop, allowing settings to be realized according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort stop T226 with digital displays for total adjustment and infeed stop individually, as well as input of the cutter diameter; the cutting depth is automatically calculated. Stop with lifting device, can be swivelled away (for curved milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Foldable stop for mortise milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron table left 500mm, right 500mm with two insert guide rails. 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed socket, switchable from the control panel. Comfort stand with electrically height-adjustable feed support, which can be swivelled away for machine setup and then easily locked into place. Dust extraction nozzle 2 x 120mm. Compressed air connection 6 bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belts renewed. Operating manual. CE marking. Gjdpjzbm Tfsfx Acijbt Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with adjustable angle. Special drilling machine for staircase construction, window construction and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed using the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching then takes place pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table Gjdpfsyfta Tjx Acisbt 2 swiveling workpiece supports 2 side stops, can also be used as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier".

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy plates with new suction cup rubber. Lifting capacity: 150 kg horizontally and vertically. Suction cup can be pivoted 90 degrees by motor. Suction box: 1000 x 675 mm. Audible warning signal for too low vacuum. 400 V, 1.5 kW. Can be attached to an existing chain hoist. CE marking. Gbsdpov S Synjfx Aciet No inspection book available. Suction cup rubber replaced. As new condition. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this supplier."

Condition: excellent (used), Year of construction: 2011, Profile Belt Sander, PS0 Rasprofil by Zimmermann with Extensive Accessories Belt sander with tilting table and additional fittings for rasping. Ideally suited for model making and mold construction. Designed for precision contour sanding. All settings made via clamping lever and fine adjustment. Drive motor: 400 Volt, 1.1 kW Table tiltable up to 45 degrees forwards and up to 20 degrees backwards Machine table approx. 400 x 400 mm Upper extraction arm foldable for sanding large parts. By locking the freestanding profile rail in the upper machine section, high angular accuracy can be achieved. Includes three reversible profile rails (15, 30, and 40 mm, straight and radius profiles). Several sanding belts included, see photos Three unused rasps Extraction connection 80 mm Waldmann mounted work light Original paint, touched up in places CE marking Gbodpfew Iqvqox Acist Very well-maintained machine from prototype manufacturing in the motorsport department of a Wolfsburg automotive manufacturer. Apparent minimal previous usage. Dimensions approx. 600 x 850 x 1350 mm (LxWxH). Weight approx. 220 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this seller.'

Condition: excellent (used), Year of construction: 2008, Universal Table Router FZ0 by Zimmermann Modelling milling machine with variable-speed Bosch motor GGS 27 LC Ideally suited for model making and tool & die applications. Drive motor: 230 Volt, 0.6 kW Adjustable spindle speed approx. 12,000 to 27,000 rpm Machine table approx. 590 x 420 mm Unit swivels 90 degrees to both sides Longitudinal fence with fine adjustment Extraction hood and safety guard Collet chucks for 6 mm and 8 mm Includes the cutters and milling bits shown in the pictures Comes with lockable base cabinet, 2 drawers and 1 door; key included The base cabinet was modified by the previous owner with an aluminium sheet and angles to provide an integrated extraction option, see photos Waldmann surface-mounted lamp with magnifier attachment Original paint, partially touched up CE mark Very well-maintained machine from the prototype manufacturing section of a motorsport department at a Wolfsburg automotive manufacturer. Evidently, it has seen very little use so far. Machine dimensions approx. 680 x 600 x 780 mm (L x W x H) Cabinet dimensions approx. 600 x 620 x 880 mm (L x W x H) Weight approx. 190 kg The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse – see “more offers from this seller.” Gjdpfxjw Ip Dgo Aciobt

Condition: like new (used), Set of six rasps for carpenter's profile sanding machine PS 0 with rasp profile The rasps appear practically as new, see photos. Sold only as a set, no individual sale. Gbodpfx Acsw Ni Egsist The machine can be demonstrated onsite by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: excellent (used), Set of profile sanding rails for Zimmermann profile sanding machine PS 0, or PS 0 with rasp profile Includes one reversible rail each in widths 15, 30, and 40 mm, with one straight side and one side with a radius. The rails appear practically as new, see photos. Gsdpjw Nizbjfx Aciobt Also included: 1 box each of P80 sanding belts in widths 15, 30, and 40 mm Sanding belt length: 1985 mm, suitable for Zimmermann PS0 Sale only as a complete set, no individual sales possible. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and available in our warehouse, see "other offers by this supplier."

Condition: like new (used), 40mm Milling Arbor for Martin Tilting Spindle Moulder T27 Clamping length 160mm, arbor diameter 40mm. With quick-clamping nut. From stock, apparently has never been used. Milling arbor is only suitable for T27, not for T26. Gbjdpjwnm U Refx Acijt The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this supplier.'

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Gjdpfow S Dmdex Aciebt Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: good (used), Various suction manifolds, suction distributors Only suction bell C is currently available; details can be found in the photos. Suction bell C: 140 euros Gedstp Hpbepfx Acijbt The parts can be viewed on-site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse; see "other offers from this seller."

Year of construction: 2021, condition: like new (used), Protective cover for milling curved parts on the ring etc. This protective device is often recommended by the BG. Maximum cutter diameter 160mm With thrust ring, brushes and brake wedge for the thrust bearing Gjdpfxst Ixhgs Aciobt Has obviously not been used very often. The machine can be demonstrated on site by appointment. We only offer only machines that are ready for demonstration in our warehouse, see "other offers from this supplier". offerer".

Condition: excellent (used), Protective cover for milling curved parts on the ring etc. This protective device is often recommended by the BG. Gbedpfx Aot Ixiksciet Maximum cutter diameter 160mm With thrust ring, brushes and brake wedge for the thrust bearing Has obviously not been used very often. Year of manufacture unknown The machine can be demonstrated on site by appointment. We only offer only offer machines that are ready for demonstration in our warehouse, see "other offers from this offerer".

Condition: like new (used), Martin Quick-Clamping Nut for 40mm Milling Arbor. From stock, apparently has never been used. The quick-clamping nut is used for the T27. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this supplier.' Gbjdpfx Acjwnnauoist