Second-hand machinery for sale (26)

Condition: excellent (used), Year of construction: 1995, Combined surfacing and thicknessing planer from Hofmann, featuring the legendary Leitz-Wigo spiral cutterhead, very robust construction in a compact design. Special feature of this machine: The surfacing table does not need to be folded up for thicknessing, so no conversion is necessary. Equipped with a "genuine" spiral cutterhead. Planing width approx. 620 mm Thickness table electrically adjustable with digital display, fine adjustment via handwheel Grooved steel infeed roller Rubberized outfeed roller, new Planing height approx. 4 - 240 mm 2 feed speeds 7 + 14 m/min Table length 2520 mm Drive motor 5.5 kW with automatic motor brake 2-knife cutterhead with spiral-shaped, re-sharpenable HSS knives Two sets of spiral knives are included, each mounted in matching pressure blocks. Re-sharpening is done by a sharpening service, and the sharpened knife sets can then be easily screwed into the cutterhead without any adjustment work. Slotted table lips Cutterhead guard Suvamatic Fence swivels with guide strip Concave and pointed edge setting for the surfacing tables Rod for hanging the dust extraction hood Dust extraction port 2 x 160 mm Only a few touch-up spots V-belt renewed Knives sharpened Rubber outfeed roller renewed Operating manual CE marking Hjdpsztkyxofx Acgofl No scratches on the tables. Thickness table with two adjustable table guide rollers Dimensions approx. 2520 x 1200 x 1200 mm (L x W x H). Weight approx. 1300 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "other offers from this supplier".

Condition: excellent (used), Year of construction: 2013, Brandt Highflex KDF 220 edge banding machine with joining, corner copying, and two trimming blades. Highly automated. A video of the machine in operation can be sent upon request. Edge thickness range approx. 0.4 - 3mm, solid edge up to 6mm Workpiece height approx. 10 - 60mm Feed speed approx. 10m/min Noise protection hood Extendable workpiece support Dust extraction connection 1x120mm, 1x100mm, 3x80mm Easy-Touch control panel EC+ for easy machine operation 4 programs can be stored. Machine in Highflex version, highly automated, switching from thin edge to thick edge via programs Units: Extended infeed zone Chain track central lubrication, pneumatic manual Glue pot quick-change device, currently one glue pot available Top pressure manual adjustment, PU rollers Infeed guide manual adjustment with SIKO counter for chip removal Joining milling cutter with diamond milling cutters, sharpened Contact heating shoe for preheating the panel Gluing section with automatic edge feed for roll material up to 3mm, switchable for co-rotating and counter-rotating operation Pressure zone with 3 rollers, pneumatic adjustment between thin and thick edge Hfodpfjzzqwmox Acgel Cut-off saw with 2 motors, straight cuts or bevel cuts (program adjustment) Combination milling unit, pneumatically controlled for flush trimming, chamfer and radius Corner rounding milling cutter R2 with diamond milling cutter with integrated sensing ring Radius trimming blade R2, pneumatically retractable with quick-change device Glue joint trimming blade with large roller, pneumatically controlled Hood locking CE marking All indexable inserts of the milling units and the trimming blades have been renewed or re-sharpened, saws sharpened, diamond joining milling cutters sharpened. The machine is therefore ready for immediate use. Only the diamond milling cutter of the profile milling unit has not been renewed, but it is still sharp. Original paint, only a few spots have been touched up. Unfortunately, the machine does not have an operating hour counter, but it still looks very good visually. Very good condition, see original photos. Machine dimensions approx. 4550 x 1250 x 1550mm (LxWxH) Weight approx. 1400kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, shaping, form veneering, edge banding, etc. With some limitations, you can certainly do without a hydraulic veneer press with this press. New heat-resistant silicone membrane, extremely flexible and easy to clean. Hjdpfx Acsy Hl Hpjgsfl Also suitable for shaping preheated thermoplastic materials such as acrylic glass or solid surface materials. Frame inner dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with a capacity of 40 m³/h and two vacuum tanks of 200 liters each, ensuring comfortable operation and rapid evacuation. Electronic vacuum pressure switch, which switches off the pump when the target negative pressure is reached, preventing continuous operation. Movable on four swivel casters, lockable. Frame can be easily folded up and is locked with two bolts. Double frame for quick replacement of the membrane. A new silicone membrane is currently installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Original paint, some areas have been retouched. The silicone membrane and the base plate have been renewed; the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020mm (LxWxH). Weight approx. 550kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, woodturning lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Hodpfx Aszfwm Nocgofl Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs for turning and milling operations can be stored. Hydraulic copying of a pattern or template. The roughing and copying tools are equipped with fine adjustments. Template adjustment is possible from the front and rear via fine-pitch spindles. The copying length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within each stage, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 rpm Speed stage 2: 350 - 3400 rpm Distance between centers approx. 1550mm Copying length with steady rest approx. 1350mm Bed length approx. 2100mm Feed adjustable continuously, rapid traverse with safety end stop. Hydraulic copying slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release mechanism. Extensive accessories: Ring steady rest with front turning tool and insert guide. Four-jaw steady rest. Four-jaw chuck 125mm. Copying tools, center points, hexagonal drive, etc. Milling unit with 3kW motor for mounting on the copying slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots have been touched up. Very good condition, from a small carpentry workshop. The machine was apparently not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site upon prior appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider."

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide-belt sanding machine with electronic segmented sanding pad and finishing sander. Ideal sanding machine for interior construction companies, also suitable for intermediate sanding before painting. Edge banding machine with a combination unit and electronic multi-segment pressure bar, edge segments can be switched on and off. Segment width of the pressure bar: 35 mm Contact roller pneumatically adjustable, low wear due to grooved steel roller. Grain size compensation. Drive motor 7.5 kW with automatic motor brake, stepless belt speed controlled by a frequency inverter from 2 - 18 m/s. Belt feed steplessly adjustable via a frequency inverter from 2.5 - 13 m/min. Pneumatic workpiece-controlled belt blowing device. Cleaning brush at the discharge. Constant working height of 900 mm by adjusting the upper part of the machine, thus also integrable in sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340 mm. Workpiece height approx. 3 to 150 mm. Common sanding belt dimension: 1360 x 1900 mm. 3 rubber-coated pressure rollers. Infeed roller table and foldable discharge table. Preparation for vacuum blower. The belt is perforated and connectors for an optional blower are available. Alternatively, the belt can also be connected to the extraction system. Extraction connection: 1 x 200 mm, 1 x 140 mm and 2 x 100 mm. Terminal control with 50 programmable sanding programs for automated machine control. Parameters: belt speed, feed speed, workpiece height, pressure bar engagement points front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking. Hjdpfx Acjzqvmrsgsfl Operating manual. Without the illustrated connection cable. Original paint, only partially retouched. Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150 mm (L x W x H). Weight approx. 2400 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: excellent (used), Year of construction: 2000, Robust oscillating milling machine T 26, swiveling from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Swiveling angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When the height is adjusted, the correction factor for the swiveling angle is displayed in the upper display, which is then set on the stop, allowing settings to be realized according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort stop T226 with digital displays for total adjustment and infeed stop individually, as well as input of the cutter diameter; the cutting depth is automatically calculated. Stop with lifting device, can be swivelled away (for curved milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Foldable stop for mortise milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron table left 500mm, right 500mm with two insert guide rails. 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed socket, switchable from the control panel. Comfort stand with electrically height-adjustable feed support, which can be swivelled away for machine setup and then easily locked into place. Hodpfx Ajzbm Tfocgjfl Dust extraction nozzle 2 x 120mm. Compressed air connection 6 bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belts renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with adjustable angle. Special drilling machine for staircase construction, window construction and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed using the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Hfjdpfx Ajyfta Tjcgel Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching then takes place pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier".

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trimming blades. A good entry-level machine with comprehensive features. Hfedpfxezn Afpe Acgel A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed speed: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x100mm, 4x80mm, including the depicted ducting to 200mm Easy-Touch control with color screen for easy operation of the machine 10 programs can be saved Units: Upper pressure: manual adjustment with crank and SIKO counter Infeed guide: manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened Total of 2 interchangeable glue tanks for quick color changes from white to transparent Gluing section with automatic edge infeed for roll material up to 3mm Pressure zone with 3 rollers Miter saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering, and rounding Corner rounding cutter R2 with diamond cutter, 1 motor-driven Radius trimming blade R2, manually adjustable Glue seam trimming blade with large roller, pneumatically controlled Hood locking CE marking Operating manual as a folder All indexable inserts of the milling units and the trimming blades have been renewed or re-sharpened; saws have been sharpened; diamond joining cutters have been sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the shaping cutter has not been renewed, but it is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses have been renewed. Approx. 1200 operating hours, i.e., only 1/2 hour per day. Machine dimensions approx. 4300 (with table) x 1250 x 1600 mm (LxWxH) Weight approx. 950 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "other offers from this supplier."

Condition: good (used), Year of construction: 2008, Hydraulically Height-Adjustable Pallet Truck from Witte - Alufix for loading coordinate measuring machines With Hovercraft Air Bearing Plate Hfsdpow Nylkjfx Acgsl Pallet truck with hydraulic height adjustment from approx. 660 mm to 950 mm. Table top coated with a roller on the broad side for bridging height differences between the table and measuring plate. Internal dimensions approx. 900 x 700 mm. Eurofix air bearing plate with handle and integrated air valve for easy movement and positioning of heavy workpieces on coordinate measuring machines. The surface is equipped with 50 mm grid pattern boreholes. The holes have a diameter of 12.5 mm, a depth of 7 mm, and M6 threaded inserts at the base. The air supply can be activated via the valve integrated in the handle, allowing the entire plate with the mounted measuring object to be moved very easily. Usable area (aluminum) is approx. 600 x 600 mm. Ideal for Witte Alufix clamping systems for fixture construction in the automotive sector, etc. Dimensions approx. 1000 x 800 x 660/950 mm (LxWxH). Weight approx. 100 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See "more offers from this supplier."

Condition: excellent (used), Two Digital Calipers Digital lightweight caliper, Garant 800, identical to Mahr MarCal ESA 800, measuring range 800mm, with wooden case Digital caliper Mitutoyo 700-111, measuring range 150mm The batteries have been replaced or are in good condition. Hfodew Tcvyopfx Acgel The measuring tools can be demonstrated on-site by appointment. We only offer machines that are available and ready for demonstration in our warehouse – see “more offers from this seller.”

Condition: excellent (used), Range of measuring tools, calipers Mitutoyo 571-203-10 digital depth gauge, measuring range 300mm Garant 412601/150 digital caliper (manufacturer likely Mitutoyo), measuring range 150mm Unknown-brand digital caliper, measuring range 150mm Expert analog caliper, measuring range 300mm Batteries have been replaced or are in good condition. The measuring tools can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse—see "more offers from this supplier." Hjdpfx Asw Tb Dpecgjfl

Condition: excellent (used), Two digital calipers Digital caliper Mitutoyo 551-231-10, measuring range 300mm Digital caliper Mitutoyo 500-181-U, measuring range 150mm The batteries have been replaced or are in good condition. Hjdpfx Asw Tctrjcgsfl The measuring tools can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this supplier".

Condition: excellent (used), Set of profile sanding rails for Zimmermann profile sanding machine PS 0, or PS 0 with rasp profile Includes one reversible rail each in widths 15, 30, and 40 mm, with one straight side and one side with a radius. The rails appear practically as new, see photos. Also included: 1 box each of P80 sanding belts in widths 15, 30, and 40 mm Sanding belt length: 1985 mm, suitable for Zimmermann PS0 Sale only as a complete set, no individual sales possible. Hfjdpfjw Nizbsx Acgsl The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and available in our warehouse, see "other offers by this supplier."

Condition: like new (used), Set of six rasps for carpenter's profile sanding machine PS 0 with rasp profile The rasps appear practically as new, see photos. Hsdpfx Asw Ni Egocgsfl Sold only as a set, no individual sale. The machine can be demonstrated onsite by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: excellent (used), overall weight: 17 kg, jaw width: 125 mm, total length: 345 mm, clamping length: 150 mm, Modular vise, jaw width 125mm Gerardi Modular 125 Robust machine vise, drill press vise Overall length approx. 345mm Clamping range approx. 150mm Jaw width 125mm with pull-down jaws Hfsdpfxexmk I No Acgel Additional prism jaw included Mechanical clamping operation using 19mm wrench or ratchet The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this supplier."

Condition: good (used), Various suction manifolds, suction distributors Only suction bell C is currently available; details can be found in the photos. Suction bell C: 140 euros Hfsdpfx Acotp Hpbegol The parts can be viewed on-site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse; see "other offers from this seller."

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy plates with new suction cup rubber. Lifting capacity: 150 kg horizontally and vertically. Suction cup can be pivoted 90 degrees by motor. Suction box: 1000 x 675 mm. Audible warning signal for too low vacuum. 400 V, 1.5 kW. Can be attached to an existing chain hoist. CE marking. No inspection book available. Suction cup rubber replaced. As new condition. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this supplier." Hsdpfx Acjv S Synsgsfl

Condition: excellent (used), Protective cover for milling curved parts on the ring etc. This protective device is often recommended by the BG. Maximum cutter diameter 160mm Hfjdpfot Ixikjx Acgol With thrust ring, brushes and brake wedge for the thrust bearing Has obviously not been used very often. Year of manufacture unknown The machine can be demonstrated on site by appointment. We only offer only offer machines that are ready for demonstration in our warehouse, see "other offers from this offerer".

Year of construction: 2021, condition: like new (used), Protective cover for milling curved parts on the ring etc. Hfodpet Ixhgjfx Acgol This protective device is often recommended by the BG. Maximum cutter diameter 160mm With thrust ring, brushes and brake wedge for the thrust bearing Has obviously not been used very often. The machine can be demonstrated on site by appointment. We only offer only machines that are ready for demonstration in our warehouse, see "other offers from this supplier". offerer".

Condition: like new (used), Martin Quick-Clamping Nut for 40mm Milling Arbor. From stock, apparently has never been used. The quick-clamping nut is used for the T27. Hfjdpfx Acownnauegsl The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this supplier.'

Condition: like new (used), 40mm Milling Arbor for Martin Tilting Spindle Moulder T27 Clamping length 160mm, arbor diameter 40mm. With quick-clamping nut. From stock, apparently has never been used. Milling arbor is only suitable for T27, not for T26. Hfsdpfxjwnm U Rj Acgjl The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this supplier.'

Condition: new, A pair of unused forks FEM2A Tine cross-section 100x40mm Fork length 1200mm Load capacity 2500kg per pair Fork carrier height 407mm Hfedpfov Acggex Acgsl ISO II A, ground clearance 76mm The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: good (used), Mixed lot of various transport castors, swivel castors Tente, Wicke, etc. Various dimensions and load capacities Hodet I Duljpfx Acgsfl Sold only as a set, not individually. Price applies to all castors shown. The castors can be inspected on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier". supplier".

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes Hodpfx Asw S Dmdocgjfl 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: excellent (used), Year of construction: 2011, Profile Belt Sander, PS0 Rasprofil by Zimmermann with Extensive Accessories Belt sander with tilting table and additional fittings for rasping. Ideally suited for model making and mold construction. Designed for precision contour sanding. All settings made via clamping lever and fine adjustment. Drive motor: 400 Volt, 1.1 kW Table tiltable up to 45 degrees forwards and up to 20 degrees backwards Machine table approx. 400 x 400 mm Upper extraction arm foldable for sanding large parts. By locking the freestanding profile rail in the upper machine section, high angular accuracy can be achieved. Includes three reversible profile rails (15, 30, and 40 mm, straight and radius profiles). Several sanding belts included, see photos Hsdpfx Acsw Iqvqegjfl Three unused rasps Extraction connection 80 mm Waldmann mounted work light Original paint, touched up in places CE marking Very well-maintained machine from prototype manufacturing in the motorsport department of a Wolfsburg automotive manufacturer. Apparent minimal previous usage. Dimensions approx. 600 x 850 x 1350 mm (LxWxH). Weight approx. 220 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this seller.'