Textile label printer

CMM-Chuwa Spica 3000

Year of construction: 2024, condition: new, Flagship Model of Spica Series CMM Spica 3000 - Simultaneous Three Color Printing: two color printing on the front & 1 Color on the back of the label. Double sided printing and ribbon saving function reduce cost and realize more effective printing. Easy design and operation with printing application NiceLabel. Rotary Cutter and Stacker included. NiceLabel Designer Pro - option. Print speed: up to 150 mm per second. Resolution: 300 dpi. print on roll media. Phsdegqggnspfx Aa Esa CMM ULTRASONIC CUTTER CUC-45 CUC-45 is an optional equipment for Spica Series. Vega series have ultrasonic cutter CUC-45 as an option. It needs to connect both ultrasonic generator and cutter assembly with the care label printer to use Ultrasonic Cutter CUC-45. We recommend CUC-45 to cut double sided label. Generation of fray at the cut edge can be eliminated as the edge is cut precisely by the ultra-sonic cutter.

Condition: ready for operation (used), A 4-color Padane single-cylinder counter-printing machine with 4 inking units in pressing operation is available. Printing units: 4, repeat range: 280mm-650mm, max. printing width: 780mm, max. foil width: 810mm, cliché thickness: 2.84mm, printing process: single-sided, max. roll diameter: 600mm, number of cliché cylinders at 270mm: 2, number of cliché cylinders 280mm-650mm: 4, machine dimensions X/Y/Z: approx. 7500mm/2600mm/3000mm. Documentation available. On-site inspection is possible. Expected to be available from June 2025. Phsdswdwzaepfx Aa Eja

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate Podpfx Aewypp Ija Ejha - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml Pedpjn D Ew Iofx Aa Ejha 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Pedpfxek Hz Nqe Aa Eeha Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Year of construction: 2018, Converting Line GM 330 FB-D (Hot stamping + Screen printing) Year of manufacture: 2018 Manufacturer: Grafisk Maskinfabrik Maximum web width: 350 mm Minimum web width: 50 mm Maximum unwind diameter: 700 mm Maximum rewind diameter: 600 mm Phjdpfx Aaow I T Ucj Eoa - Vetaphone Corona Treater - BST Web Guiding System Hot Foil Stamping Unit (Flatbed) Speed: 6,000 impressions/h or 10-15 m/min Web width: 110 mm - 330 mm Dual foil unwind and rewind with 250 mm diameter Substrates: 50–500 µm Plate thickness: 5-10 mm (7 mm standard) Stamping pressure: 30 tons Foil feed in both transverse and longitudinal direction (rotatable turret) Temperature range: 80° - 130° C Heating time approx. 20 min. Screen Printing Unit Speed: 4,000 cycles/h or 5-15 m/min Web width: 110 mm - 330 mm Frame size: 660 mm x 500 mm Frame type: 30 mm x 30 mm aluminum frame Printing area: 330 mm (length) x 330 mm (width)

Condition: excellent (used), Year of construction: 2021, Automatic Folding Carton Gluing Machine ETERNA EFOLD 1100 ELITE Year of manufacture: 2021 ETERNA – A Bobst Group Company Psdow I Ey Depfx Aa Esha - Lateral alignment at the feeder (both sides) - Tools and devices for 4-point and 6-point gluing - ERO gluing system (cold glue), year of manufacture 2020 - Pre-breaker Technical details: Paper weight: 200-800 g/m² Total power requirement: 35 kVA

Condition: used, Year of construction: 1997, functionality: limited functionality, product width (max.): 510 mm, working width: 505 mm, • Model: Gallus Arsoma EM 510 • Year of Manufacture: 1997 • Web Width: 510 mm • Printing Units: 7 x UV flexo units • Die-Cutting Units: 2 Phedpfxsw Ec Smo Aa Esa • UV Drying: Included • Glue: Included • Barcode Printing Capabilities: Supported • Web Turnbar (Turner Bar): Included • Web Cleaning: Included • Roll-to-Sheet Conversion: Included • Unwinder: Included • Rewinder: Included • Chiller: Included

Year of construction: 1980, condition: good (used), SHIKI model PC 30, year 1980, 1x letterpress (2 colors); laminating unit; punching unit; longitudinal cut, 2 hot foil plates, in a good condition, immediately available Pedpjh I D Dnefx Aa Esha

Condition: used, Year of construction: 2008, Technical data: Printing Section - 5 × UV Flexo Printing Units Phodpfx Aajxlrd No Eoa - 5 × UV Dryers - Web Inspection: BST PowerScope 300 – Web Inspection System Unwinder - Max roll diameter: 1250 mm - Heavy-duty construction with pneumatic shaft and web tension control - Integrated splice table and web guiding system Rewinder - Max roll diameter: 1250 mm (≈ 40 inch) Cold Foil / Lamination Module - Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turnbar (Web Inversion Unit) - Allows reverse-side printing or lamination — flexible for multi-layer label applications Remailing Section - 24” - Supports reprocessing or secondary processing of pre-printed materials Additional Modules - Ben Bunch 500 - Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) - Cross Cutting Cylinder (inline sheeting or perforation — precise longitudinal or transverse cutting) - Punching Units (adjustable punching length from 12” to 26”, ideal for perforations, registration holes, or special die-cut shapes in-line)