Centrifuge

CEPA GZ 300

Condition: new, Year of construction: 2026, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Djdpfxsk H Ic Uj Acxjup Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: new, Year of construction: 2025, The Concept Easy is the ideal assembly support for dowel construction at the case goods production as well as at drawer production. Short introduction: Duodpedx Daasfx Acxop • Small footprint requirement, less than 1,8 m2 • Potentiometer for stepless adjustable pressing force • Pressing force min. 300 daN (kg) • Pressing force max. 2200 daN (kg) • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening

Condition: refurbished (used), Year of construction: 1988, - Refurbished in 2022 - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle Duedpjwhk Ubefx Acxep - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearshift - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct position measurement - Collision protection coupling in the Y and Z axes - Built in 1988 - Including tool holders, drilling/milling tools, and tool carriage Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main drive: - Pole-changing Three-phase brake motor: Manual gearbox with forward/reverse rotation - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring package - Tool release: Hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (including safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Year of construction: 2026, condition: new, Mobile cleaning centrifuge including buffer storage for dirty water, agitator and double membrane compressed air pump. - new machine - Numerous other variants and special designs on request. Machine type: Process water centrifuge solid-liquid Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: vibratory finishing technology, general solid-liquid separation, cooling lubricant processing, wet blasting systems, ... Dujdpfx Asf Sqfqocxsp Benefits: - High discharge through acceleration forces acting in the system of over 1800 times the acceleration of gravity - Management of the process water in a circuit, which minimizes operating costs and protects the environment - Saving of expensive additives for the vibratory grinding process (compound) - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70 ° C (optional cooling available) - frequency-controlled motor drive for smooth acceleration and braking of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems in the field of vibratory grinding, drying and process water technology, which are precisely tailored to your application. From development to production: We deliver all of our products from a single source and everything is "Made in Germany". ----- Please just contact us, we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: good (used), Year of construction: 2011, machine/vehicle number: MS 1153, Offer 23158 Technical data ca : - passage to blasting chamber B 370 x 170 mm - blasting nozzle - Door opening to blasting chamber - Blasting material pressure vessel - blasting material recovery Dusdpfx Acellvr Dexjp - separate control panel - space requirement blast machine 1600 x 2000 x H 1750 mm - space requirement blasting material container 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ - Air volume 700 - 1500 m³/h - Suction fan 3 kW - space requirement filter unit 1600 x 1600 x H 3250 mm - mot. driven inlet roller table 4 m - roller table without drive 3 m - roller width approx. 800 mm - roller table height approx. 700 mm

Condition: new, Year of construction: 2024, Tunnel type parts washer for metal and plastic parts. Used in different sectors like automotive, food, metal machining, sheet metal, plastic crates etc. Operation Principles The work piece enters in tunnel by means of belt conveyor system; the positioned nozzles wash every piece of the work piece. The work piece, while passing through the tunnel is washed by pressurized and heated water + chemical mixture. All oil, chip and other industrial contaminations are removed from the surface of work piece during this washing process. Tunnel washing machines are standardized as well as specially tailored according to application by INTERSONİK engineering department. Washing Process Flow Washing, passivation and drying are designed exclusively by the Intersonik Process Engineers in accordance with the desired results supported by Intersonik environmental friendly chemicals. Duodpfed I Azvsx Acxep Operation Process ► Pre wash ► Main wash ► Rinsing ► Passivation ► Drying Application Areas ► Automotive industry ► Military defense industry ► Food industry ► In all manufacturing industry for mass production and maintanance purpose ► Metal furniture industry Conveyor is specially designed and manufactured by INTERSONIK according to your needs and work piece. Conveyor speed is adjustible. Automatic liquid fill is standart. Electrical heating is standart heat exchanger and burner heating types are optional. All data is visible and controllable via digital screens PLC control is optional. All liquid tanks are isolated for heat retention. Mist collecting vacuum pump and unit is standart. Please feel free to contact with us for other options and details. tunnel washing, automatic washing, automotive parts washing, metal washing, parts washer, degreasing, spray washing, pressurised washing machine

Condition: good (used), Plant: REWA Chamber Filter Press used Type: 470-15-25K-HP Design: side rail guided Filter plate format: 470x470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available in coordination with the medium Duodpjqakbrsfx Acxjp Press capacity: approx. 57 dm3 Filter pressure: approx. 15 bar Material of parts in contact with the product: Flange, feed-throughs stainless steel, PP or rubberized Material of parts not in contact with the product: Stainless steel Purchase or hire: Inspections of the systems by arrangement at our factory. Other: We can supply you with used equipment ready for operation or refurbished according to your wishes and requirements. Would you like to rent or buy this system? Please contact us, we are at your disposal.

Condition: refurbished (used), TREIF MUSTANG ID.NO. 1937 Treif Mustang dicer / slicing machine. Dimensions tools 20 x 20 and 20 x 5 mm adjustable 5 mm 5 mm. Dimensions machine 180 x 80 cm H 190 cm. Duodpfx Ajgnllaecxop

Condition: good (used), Hook type shotblasting machine 250 kg TOSCA TS-250 Type: Hook type Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Max. workpiece weight: 500 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 360 Turbine wheel diameter: 360 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Max. installed power: app. 19 kW Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm Djdpfxevpgq Ne Acxsup Machine is in the process of full refurbishment. All components that are damaged will be replaced with new, turbiness fully reconditioned, new color RAL 7037/2000..... Machine will be dellivered in condition comparable AS NEW. !!! AS NEW CONDITION !!!

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 43 h, load capacity: 3,200 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: telescopic, power: 79 kW (107.41 HP), empty load weight: 7,330 kg, drive type: Diesel, Rigid telescopic handler Mast type: Telescopic Speed class: 40 Condition: New machine Technical condition: New Dusdpfx Acjw Eqddexsp Tyre type front: Pneumatic Tyre size front: 400/70-24 Tyre condition front: 80 - 100% Tyre type rear: Pneumatic Tyre size rear: 400/70-24 Tyre condition rear: 80 - 100% Description: Hydraulic adapter for Manitou 2550 3rd hydraulic circuit, 4th hydraulic circuit, rear work lights, front work lights, heater, full cab, air conditioning, CE certificate, exterior mirrors, joystick, beacon, windscreen wiper, LED. Specifications: - Approval as a tractor with possible trailer operation - 20.0 t with 7-pin trailer socket - Fixed Dieci tool carrier mounting plate with double hydraulic quick coupler operated from the cab for attachments, including hydraulic coupling (Forks require an adapter plate for use with quick-change system). Hydraulic single-lever control unit with proportional simultaneous control (flow-sharing). Close-centre system including pressure relief kit for: - Lifting capacity 3,200 kg - Lifting height 8.65 m - Engine KUBOTA 79.5 kW (107 hp) - Displacement 3,769 cm³ - Emissions standard Tier 4f - Steering modes: all-wheel steering, crab steering, front-wheel steering - Rear hydraulics - 40 km/h - Air-suspended seat - Mounting plate with hydraulically operated quick coupler - Steering control warning light.