Drycooler Cabero S-GC/DED 095 KA/2X4E

Cabero S-GC/DED 095 KA/2X4E

Condition: used, Drycooler Cabero -Type: S-GC/DED 095 KA/2X4E -Cooling capacity: approx. 350-400 kW -Number of fans: 8 x 910 mm -RPM: 510 -Dimensions: 6100 x 2360 x 2450 mm -Volume: 127.15 L -Quantity in stock: 6 -Condition: Used in very good condition, ready to work Ijdeytp T Sjpfx Aifetg

Condition: good (used), functionality: fully functional, Conveyor belt length: approx. 28 m Discharge height: approx. 10 m Feed hopper capacity: approx. 10 m³ with adjustable dosing conveyor belt 2 transport conveyor belts (one flexible) Ijdpfev Scaxex Aifetg on a 3-axle chassis Powered by an ENDRESS 45 kVA generator

Condition: used, Year of construction: 2004, Cast epoxy resin - dry - 3 phase distribution transformer, manufacturer TESAR Italy, year of manufacture 2004, power 1600kVA, voltage ratio 20(2x±2.5%)/0.4kV, AN-AF (forced ventilation, permanent overload 30%), Dyn11, uk=6%, IP00, standard losses, functional, complete documentation and rutine test report, total 2 pcs. Itedowpb Emopfx Aifeg

Condition: used, Year of construction: 2010, functionality: limited functionality, total width: 5,840 mm, total length: 15,700 mm, Offered here is a combination cold and deep-freeze room manufactured by Dresdner Kühlanlagenbau. Included in the scope of supply are the refrigeration units as well as the electrical equipment (lighting, control cabinet, etc.). Please note that the pallet racks shown in the pictures are not included in the sale. Unfortunately, the refrigeration unit for the deep-freeze compartment is defective. Please be aware that we are unable to carry out or arrange any repairs ourselves. Size of cold room (anteroom): 5.60m x 2.75m = 15.4 m² Size of deep-freeze room: 5.60m x 12.59m = 70.5 m² Clear internal height: 3.50m Insulation thickness: 120 mm Further dimensions and technical details can be found in the attached PDF document. Ijdpfx Aijtn U Rpjfetg The unit is not dismantled and can be inspected on site at the production location in Thuringia by appointment. Dismantling and transport are not included in the price and must be organized by the buyer. However, assistance with dismantling and loading by forklift can be provided.

Condition: used, Regoplas RT50 Thermo oil temperature control unit Thermo oil up to 300'C Ijdpfedmn E Hjx Aifstg

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Itsdpfxovf E Avo Aifsg Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), functionality: fully functional, WORKING MEASUREMENTS: Useful tape width: 55cm Number of spirals: 18 Spiral diameter: 4.20 m approx. Height of product entry: 1.20 m Height of product exit: 3.70 m Technical description: DRUM: It is the element in charge of transmitting the movement to the belt, it is built by stainless steel profiles welded to a base ring formed a kind of cage. MAIN STRUCTURE: It is the part of the tunnel that supports the conveyor belt (through an auxiliary structure) and the drum (through the bearings). It is built with folded and welded stainless steel plate profiles. Ijdpswnzahofx Aifstg AUXILIARY STRUCTURE: It supports the belt in its movement. To avoid metal-to-metal contact, it is covered with a special high density polyethylene profile. DRUM SUPPORTS: The lower supports have two main functions: centering the drum and supporting its weight. In the upper part, other supports are placed whose mission is exclusively to collaborate in the centering of the drum. EVAPORATOR: A circular evaporator located at the bottom of the drum is used, which results in an important space saving and in a horizontal air circulation without dead spaces. FANS: Fans are placed at the top and at the bottom with the discharge directed towards the inside of the evaporator so that the air flows through the evaporator towards the product. The fans will be sized so that the air velocity, both through the evaporator and through the product, is adequate. TRACTION: Consists of an electric motor-reducer of adequate power, with previously calculated reduction ratio, so that the speed of the drum and therefore of the belt are suitable. SPEED VARIATION EQUIPMENT: This consists of a frequency variator that, by varying the power supply frequency to the preset electric motor drive (between 20 Hz. and 60 Hz.), modifies its speed and therefore the output speed of the reducer, which allows us an appropriate retention time in each case. CONTROL PANEL AND MANEUVERING BOARD: The control panel includes the electrical and maneuvering elements of the Tunnel. In its front panel there are the general maneuvering controls, as well as a synoptic of operation and with the indications of the safety and alarms indicated with a luminous signal. Inside are the control elements, frequency variator with potentiometer, electronic starters for fans and other equipment protection elements.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Itedjvllxdepfx Aifog Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: reconditioned (used), Year of construction: 1999, JASA 350 S vertical packaging machine + Markem Imaje SmartDate 5 Thermal Transfer Printer The machine has been renovated, ready for operation, adapted to pack vegetables or fruit in a Raschel bag with attached front and rear foil. Equipment: - Sealing jaw with dies for handles in the package - Forming tube - Feed funnel - Markem Imaje SmartDate 5 thermal transfer printer Machine data: - Productivity: up to 60 pcs/min - Horizontal jaw width: 270mm - Vertical heater length: 450mm Isdpfjpgkwcjx Aifstg - Forming tube diameter: 170mm - Width of the main foil: 570mm - Width of additional foil: 120mm - Machine length: 2.6 m - Machine width: 1.4m - Machine height: 2.1m

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: TET502P3 - 2200403312, cooling capacity: 105 kW (142.76 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,748 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 17.9 m³/h, pump pressure: 3.42 bar, total width: 1,255 mm, total length: 3,298 mm, total height: 2,119 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller Model: TAEevo Tech 502 + P3 Manufacturer: MTA S.p.A. The TAEevo Tech 502P3 is a compact, air-cooled water chiller designed for outdoor installation (operating range: -20°C to +46°C). Adjustable chilled water outlet temperatures from -10°C to +30°C. Includes crankcase heater, phase monitoring, 500-liter buffer tank, and integrated P3 circulation pump. Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 105 kW Chilled water temperatures (outlet/inlet): 7°C / 12°C Flow rate: 17.9 m³/h Available pump pressure: 3.42 bar Ambient temperature: 32°C Refrigerant: R410A Electrical specifications: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption: 55.09 kW Max. current: 93.06 A Starting current: 191.65 A Protection class: IP54 Dimensions: Length: 3298 mm, Width: 1255 mm, Height: 2119 mm Weight: 1748 kg Connection: Rp 2 1/2" Serial no.: 2200403312 Year of manufacture: 2023 Condition: Excellent visual appearance, technically in order Stock item, as new Price: On request in EUR (plus VAT, ex works Nettetal) – 12-month warranty Isdpot Hr N Isfx Aifotg (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal