Manifold diesel engine 16 cylinders

Bosch MWM 800/210/H70 mm RHS 518V16

Condition: good (used), functionality: fully functional, fuel type: diesel, power: 257 kW (349.42 HP), nominal power (apparent): 300 kVA, Generator set 300 kVA Generator: GARBE LAHMEYER Type: AT 315 LB 51 400 V Output: 300 kVA Engine: MWM-Diesel TBD 232V12 installed in container Cgodst S Ny Uepfx Agzep

Condition: used, Year of construction: 2004, machine/vehicle number: P 04-09-002, neu U05 10 001, Spraying machine Venjakob VEN SPRAY-K All pictures only for example - Producer Venjakob - Year of construction 2004 - Current condition: not refurbished - Offer price for refurbished condition - Working width 800 mm (1000) mm - Operating side, right - Duo gun drive system - Dry filter system 4.000 m³/Std. - Diameter exhaust air pipe 400 mm - Transport belttransport System - Feed speed adjustable 3 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system LS 1 - Number of installed lacquer circles 1 Stk. - Airless spraying system 4 Stk. Krautzberger KAA 1300 - Number of lacquer pumps 1 Stk. - Producer lacquer pump Wagner 35-70 - Suitably for solvent based lacquer - Suitably for water based lacquer - Total connection power 7 kW, Stromaufnahme 17 A , Absicherung 35 A - Location, on stock - Voltage fluctuation max. +/- 5 % Cgedpfjumvr Tjx Agzjp _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, center mower lifting cylinder -Hydraulic cylinder: stroke 105 mm -Piston rod: Ø 23 mm -Recordings: Ø20 x 22 mm Cjdjgv Dinspfx Agzjgp -Cylinder: outer Ø 58 mm -Dimensions: 475/70/H75 mm -Weight: 5.7 kg

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 490 h, power: 13 kW (17.68 HP), motor manufacturer: John Deere, fuel type: diesel, maximum speed: 30 km/h, first registration: 11/2019, color: green, overall weight: 728 kg, front tire size: 24x10.50-10, rear tire size: 24x10.50-10, Equipment: hydraulics, lighting, trailer coupling, === MAIN SPECIFICATIONS === Year of manufacture: 2019 Operating hours or mileage: 490 h / 4,264 km Machine type: Utility vehicle (UTV) Drive type: Diesel – 2WD (rear wheel drive) Operating weight: 728 kg Payload capacity: 655 kg Dimensions (L x W x H): 2870 x 1524 x 1867 mm Top speed: approx. 30 km/h Tyres: Pneumatic Cabin: Open CE certification: Yes Emission standard: Stage IIIA === HIGHLIGHTS === • Reliable 3-cylinder diesel engine • 2-speed CVT transmission (High / Low) • Hydraulic tipping cargo box • Road registered (NL license plate) • Ideal for agriculture, site logistics and grounds maintenance Codoym U Rvopfx Agzegp === CONDITION === Good working condition – fully operational. Normal wear consistent with age and usage. Inspection possible upon request. === LOCATION & PRICE === Located in Sittard, The Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). === DELIVERY === Crane loading available upon request. Flexible shipping solutions arranged by the logistics team of Collé Rental & Sales.

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, overall weight: 1,700 kg, fuel type: diesel, tank capacity: 180 l, color: white, output current: 435 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 110 kW (149.56 HP), continuous power: 100 kW (135.96 HP), total length: 2,750 mm, total width: 1,100 mm, total height: 1,450 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Ricardo, Cummins, type of cooling: water, type of input current: three-phase, Three-phase stationary generator Proton ZPP 100 (100kW - 110kW) in a compact housing resistant to precipitation and additionally soundproofed. The aggregate has an external automatic reserve switching system SZR (Autostart) and many other functions as specified later in the description. - Model - Proton ZPP 100R SZR - Maximum power - 110 kW / 140 kVA - Rated power - 100 kW / 125 kVA - Prepared for operation - Yes (Flooded with fluids, test run) - Type - Industrial genset - Condition of the aggregate - Factory new - Manufacturer - Proton - Generator type - Three-phase - VAT invoice 23% - Year of production - 2024 - Warranty - 36 months ⊳ ENGINE: Engine model - Ricardo R6105AZLDS Fuel type - Diesel (Diesel) Combustion: - 22.0 liters per hour (at 75% of maximum power) - 14.5 liters per hour (at 50% of maximum power) Engine configuration - In-line (R4) Displacement - 7000 cc3 Direct injection Lubrication method - Forced, engine with oil pump ⊳ ENGINE: 100% Copper AVR voltage stabilizer - Yes Alternator model - Proton 274D 400V rated power - 100000 watts (100kW / 125kVA) 400V maximum power (up to 15 minutes) - 110000 Watt (110kW / 140kVA) Rated power 230V - 33000 watts 230V maximum power (up to 15 minutes) - 36600 Watt Rated current (400V) - 435.0 A Current protection - C16, C32, main - 200A Frequency - 50 Hz Generator construction - Synchronous ⊳ ENCLOSURE: Silenced enclosure Precipitation resistant housing Three-phase and single-phase sockets Fuel tank capacity - 180 liters Operating time on full tank (Average) - 20 hours Transport kit - Holes for forks and HDS transport hooks Dimensions 110 x 275 x 145 cm Cgodpjtpnm Uofx Agzjp Gross weight - 1830 kg ⊳ FEATURES: Voltage stabilizer (AVR) - Stamford SX460 (2%) - Electronic voltage stabilization with variable load - electronic frequency stabilization Automatic operation of the genset SZR (Self-actuated reserve switching) Thermal overload protection Sensor for oil pressure, oil level, coolant level Glow plugs Oil sump heating Heating of the cooling liquid Battery - 2 pieces 120Ah Automatic charger ⊳ CONTROLLER: Controller model - Comap InteliLite 4 AMF 20 Hour meter Ammeter Voltmeter Built-in PLC logic and PLC editor Overload protection CAN module extensions Integration with SCADA system Additional outputs - for 4G, Ethernet, RS232/485 connections GPRS remote control and monitoring - Optional Modbus, Ethernet communication - Optional Why us? We are a company specializing exclusively in generators, for more than 17 years we have been operating in this industry constantly striving to make sure that our products represent the highest quality and are as reliable as possible. During this time we have provided solutions to more than 10,000 customers in Poland even in its remotest corners. Suppliers of components of our units are selected meticulously, we make sure that they are leaders in their industries. We have a wide range of gensets from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: new, Year of construction: 2026, CORMAK ZX 40BPC is a solid metal drilling and milling machine. Possibility of head rotation +/- 90 degrees of spindle, possibility of head rotation +/- 90 degrees, automatic spindle feed, right and left rotation, large table, liquid cooling, automatic table feed in the x axis, powerful engine, ability to drill up to 40 mm. Rotational speed up to 2500 rpm Machine characteristics HEAVY STABLE CAST IRON AUTOMATIC SPINDLE FEED ADJUSTABLE HEAD HEIGHT MASSIVE CROSS TABLE WITH PRECISELY GRINDED SURFACE DOVtail-shaped guides QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATIONS ROTATING HEAD +/- 90° Technical data Max. drilling size (steel/cast iron) 32/40mm Face milling width 80mm End milling width 22mm Spindle extension 125mm Spindle taper MT4 Spindle speed (1400 rpm motor) 50～2500min-1 Maximum distance of the spindle tip from the table 735mm Maximum distance of the spindle tip from the base 1245mm Distance of the spindle from the column surface 272 mm Dimensions of the work table 730x210mm Base dimensions 690x520mm Engine 1.3/1.8kW Cooling engine 40W Dimensions 1200x1000x1910mm Weight 440 kg Cgodsvxhfmepfx Agzop

Condition: used, Year of construction: 2024, Rear section Primera DMC 4200 l 1-fold conveyor section Single-shoot distributor heads / f. 16 rows Long loading board for rear section Drawbar with folding support foot / lower linkage attachment Cat. 3 braked axle with parking brake / dual-circuit air brake system Cjdpfx Asuhnwvjgzjgp

Condition: used, fuel type: diesel, Year of construction: 2016, operating hours: 955 h, Round tipper Dumper Bergmann 2060Rplus Year of manufacture: 2016 Operating hours: only approx. 950 Payload: 6,000 kg Unladen weight: 4,045 kg Body capacity (struck): 2.5 m³ Body capacity (heaped): 3.6 m³ Body system: hydraulically 180° rotatable and tiltable skip Height: 3,107 mm Width: 2,018 mm Length: 4,489 mm Ground clearance: 2,373 mm Speed: 0-28 km/h Gross weight (road): 7,490 kg, Road payload: 3,190 kg This offer is addressed exclusively to commercial buyers as defined by §14 BGB. Cgedpfx Asyaa S Eegzop

Condition: new, Year of construction: 2026, CNC MILLING MACHINE C2131 IND (working area 2100 x 3100 mm) dynamic and precise milling plotter based on components from global manufacturers equipped, among others, with spindle of Italian production HSD. Work table Sectional table with six independent vacuum sections, made of rigid and resistant HPL panels, controlled directly from the control cabinet, Each section has holes into which the vacuum from the vacuum pump is fed via a system of tubes, The main openings in the vacuum table have plugs to accommodate different material formats, Table equipped with buffers in two axes! Pneumatic positioners to ensure that the material is always positioned in the same place, Spindle Cgedpsvup Unjfx Agzep High-quality brushless spindle from a renowned manufacturer, 9 kW, powered by inverter, with overload protection . Milling electro-spindle with innovative AIR cooling system. 3.Drive Energy-efficient YASKAWA high-performance AC servo drives, controlled by a digital controller, provide excellent machining quality while maintaining high operating speeds in each direction, Brushless AC servo motors driving the X, Y axes transfer the drive via high-performance planetary gears The Z axis, where positioning precision is crucial, is driven by a reinforced ball screw. The door is moved along the X and Y axes by HIWIN guide rails and bevel gears, which guarantee many years of trouble-free operation, and are made of high-quality hardened and tempered steel. Construction The rigid table structure , made of ribbed steel, excludes vibrations during the production process. 5 Tool magazine and tool measuring sensor The machine is equipped with a 12-position linear tool magazine, a set of ISO30 cones and ER32 bushings. Toolholders included: ISO30 and toolholder sleeves of size: 1/2’ - 6 pcs; 1/8’ - 2 pcs; 3-4mm - 2 pcs; 5-6mm - 4 pcs; 7-8mm - 2 pcs; 9-10mm - 2 pcs. 6 Software, INDUSTRIAL CONTROL: The machine is controlled by a SYNTEC industrial controller as in large machining centres. Included with the controller: keypad and LCD display. Optional latest software UCanCAM V12 Vacuum pump (optional) and extraction foot. The use of a vacuum pump significantly increases the clamping force of the workpieces on the machine table, so that the material does not move. The extraction foot is penumatic, located at the spindle, and allows the connection of any chip extractor, keeping the machining clean, safe and at the same time maintaining the precision of the work Technical specifications Working area 2100x3100 mm Z axis 300 mm Structure Arm in cast iron / table in welded steel Drives hybrid servo motors (AC LEADSHINE) 1500W Hybrid table Spindle power 9 kW Shimpo gearbox Spindle speed 6000 to 24000 rpm Power supply 400 V, compressed air min. 8 bar Repositioning accuracy 0.01 mm Linear bearing trapezoidal rails, Hiwin carriages Material clamping vacuum, hybrid Vacuum pump (optional) 7.5 kW, 8 independent vacuum sections Software (optional) UCanCAM V12

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 30 W, sheet thickness steel (max.): 80 mm, sheet thickness aluminum (max.): 50 mm, The Durma HD-F 3015 Fiber laser cutting machine in 30 kW, presented by Durma Maschinen GmbH, is a top-class fiber laser cutting machine developed for maximum precision and efficiency in metal processing. As a direct manufacturer with locations in Münster and Staufenberg, Durma Maschinen GmbH stands for quality, reliability and outstanding customer service. Features: 30 kW / 80 mm mild steel 50 mm stainless steel Automatic nozzle centering Automatic nozzle changer with 26 stations Servo shuttle table Focal distance F300 mm Conveyor system Technical data: Power: 30 kW Maximum sheet size: 3,048 mm x 1,524 mm Maximum sheet weight: 200 kg/m² Cgodpfx Agoq Nl T Tozsp Z-axis stroke: 160 mm Maximum synchronous speed: 170 m/min Maximum synchronous acceleration: 2.8 G Positioning accuracy: +/- 0.02 mm Repeat accuracy: +/- 0.02 mm Product description of the Durma HD-F 3015 in 30 kW: Powerful and Efficient: equipped with a 30 kW fiber laser, the Durma HD-F 3015 offers outstanding cutting performance and precision for a wide range of materials, including steel, aluminum and copper. Spacious work area: With a work area of 3000 x 1500 mm, this machine is ideal for processing both large and small workpieces. Advanced CNC control: The user-friendly and precise control allows for easy handling and optimizes cutting paths to minimize material waste. Automatic nozzle changing system: This feature increases productivity and reduces downtime when changing cutting nozzles. Energy efficiency: The laser is characterized by high energy efficiency, resulting in lower operating costs. Robust design: The machine impresses with its durability and reliability, even under demanding working conditions. Safety: Comprehensive safety functions ensure safe operation. Versatility: Compatible with various laser cutting software solutions, it is suitable for a wide range of industries. Durma Maschinen GmbH - your reliable partner: As the manufacturer of the Durma HD-F 3015, we, Durma Maschinen GmbH, pride ourselves on our fast and efficient service and our extensive spare parts supply. With locations in Münster and Staufenberg, we guarantee 100% availability and fast response times to ensure that our customers always receive the support they need. Our commitment to quality and customer satisfaction makes us the ideal partner for all your fiber laser cutting needs. Interested in the Durma HD-F 3015 in 30 kW? Contact us for a no-obligation consultation or a customized quote. At Durma Maschinen GmbH, we will be happy to answer all your questions and find the best solution for your needs. We look forward to your inquiry!