Gearbox 1: 60

Bonfiglioli MVF 49/A

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm Bdodpfsg R Tfusx Abbsk -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H315 mm -Weight: 111 kg

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos Bsdpfxeg Si I Ij Abbjdk -Clamping devices: see photos -Dimensions total: 400/500/H310 mm -Weight: 86 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws Bodpfx Aerhmnwsbbsdk -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 16 mm -Dimensions: see photo technical. drawing -Quantity: 1x set of interchangeable jaws available -Total dimensions: 52/49/H41 mm -Weight: 0.4kg/set

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system Bdedpjg Si Nlsfx Abbek -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H335 mm -Weight: 123 kg

Year of construction: 2011, condition: excellent (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Bodswmlfljpfx Abbsdk Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: good (used), Quick-change tool post, tool post head, quick-change tool post, quick-change drill bit post, quick-change boring bar holder, quick-change turning tool post, double tool post, double turning tool post, double tool post, double quick-change tool post, 4-way turning tool post, quadruple tool post, 4-way quick-change tool post Bdsdpfxswvpvgj Abbsk -Quick-change tool holder: 4-way quick-change boring bar holder -Recording dimensions: see photos -Clamping height: 59/34 mm -Clamping length: 200 mm -Dimensions: 330/200/H285 mm -Weight: 30.3 kg.

Condition: used, marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: Prism block for marking plate, clamping plate, straightening bench ... 6 pieces Bdsdpfxeu T Tp Uo Abbjk -Prism width: 100 mm -Dimensions: 6x 250/140/H63 mm -Dimensions: see photo technical drawing -Delivery/Price: complete -Transport dimensions: 250/280/H190 mm -Total weight: 75.1 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment, lathe Bedpsitdiysfx Abbodk -Handover: in the current condition as seen -Bracket: cracked, see photos -Tailstock: center height adjustable, 155 to 165 mm -Dimensions: see the drawing in the photos -Dimensions: 430/175/H210 mm -Weight: 21.7 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 160 mm Bjdpfjd Irbaex Abbsdk -Passage: Ø 41mm -Weight: 8.7 kg

Condition: excellent (used), power: 9 kW (12.24 HP), fuel type: diesel, color: other, Year of construction: 2021, operating hours: 513 h, General information Year of manufacture: 2021 Technical information Torque: 36 Nm Number of cylinders: 3 Drive: Track Engine type: Kubota D722-EF13 Empty weight: 1.150 kg Height: 219 cm Functional Quick coupler system: Yes CE mark: yes Bdedsxf Daispfx Abbjk Condition Technical condition: very good Visual appearance: very good General Country of production: Japan Condition CE type: CE