Triplex side loader

Battioni + Pagani BP

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor Fodpfx Afewclkyensfu The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: refurbished (used), 60 m³ / 60,000 l extinguishing water tank according to DIN 14230 Tank volume: 60,000 liters / 60 m³ length: approx. 12.680 mm diameter: approx. 2.500 mm Weight: approx. 9.500 kg Material: steel material S 235 JRG 2 Underground tank for underground storage, single or double walled, suitable for walkable and drivable areas (load class SLW 30) with 1 dome (outer diameter 720 mm) with blind cover, seal and screws. New or used immediately available! The tank is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The tank complies with the regulations of DIN 14230 (underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted fire department coupling /fixed coupling A according to DIN 14319 in the design form B without gauge connection - Venting flange connection in NWN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground - Outside provided with a bitumen coating for protection - On request we can provide the tank with a full interior coating on a bitumen basis or epoxy resin interior coating (against corrosion) - It is also possible to line the tank with a plastic inner cover lining Fjdpfx Aehh Sruofnefu A cost-effective delivery with our own truck is possible. Just tell us the place of delivery, you will immediately receive the exact freight costs. An inspection is possible at any time by prior appointment

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 16,000 kg, lifting height: 5,500 mm, free lift: 1,830 mm, fuel type: diesel, mast type: triplex, construction height: 3,465 mm, power: 188 kW (255.61 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift - diesel Load center: 1200 mm Fork width: 250 mm Fork thickness: 100 mm Mast type: Triplex Transmission: ZF 3WG171 Condition: New machine Technical condition: New Front tires type: Pneumatic Front tires size: 12.00 x 20 Front tires condition: New Rear tires type: Pneumatic Rear tires size: 12.00 x 20 Rear tires condition: New Description: NEW MACHINE - immediately available! NEW TRUCK - ready for pick-up! Side shifter, fork positioner Increased lifting capacity to 17,000 kg! 3rd hydraulic valve, 4th hydraulic valve KALMAR fork positioner with side shifter, fork carriage with central level compensation, width = 2,500 mm Kalmar EGO comfort cab with ECC air conditioning, fresh air filter, tinted windows, air-suspended driver's seat with leather reinforcement Grammer Actimo XL Radio with RDS/MP3/USB/AUX/Bluetooth/hands-free/streaming 12/24V voltage converter incl. 2 x 12V and 2 x 24V sockets Load indicator in the display Travel direction switch on the lift hydraulic lever Protective grille for overhead window Pressure accumulator for lift hydraulics Hydraulic oil cooler with fan Mast tilt: 14° forward, 10° backward Adjustable LED beacon Kalmar fork blades Fork length: 2,400 x 250 x 100 mm Raised air intake for air filter incl. pre-separator Mudguards on drive axle, mudguards on steering axle Anti-slip coating on front fenders and tank 2 additional LED headlights in the mast below the standard headlights 2 additional LED headlights on the front cab corners facing driving direction Ffjdevpmrmspfx Afnsu Electric cab pump Blue Spot rear warning light Automatic central lubrication system on the steering axle and at the fork carriage/mast Fire suppression system Front and rear view cameras with color monitor in the cab

Condition: good (used), Year of construction: 1998, functionality: fully functional, power: 400 kW (543.85 HP), Equipment: type plate available, We are selling our 400 Kw boiler. We used it to supply our drying chambers with heat. As we no longer have these, the boiler is no longer necessary for us. The boiler also includes - Moving floor Fsdpfxoq U R Sgj Afnsfu - Entry - Boiler - Ash conveyor including container - Various pipework - Heating control Price is exclusive of 20% VAT, ex works, exclusive of dismantling, loading, contract preparation and customs clearance costs. The stove can of course be inspected by appointment. As heat acceptance is no longer possible, firing/demonstration is also no longer possible. Due to the construction of the building, it will probably only be possible to remove the boiler via the roof. The boiler was checked by a specialist company on June 05, 2024! The boiler is ready for use and fully functional.

Condition: used, Year of construction: 2011, operating hours: 3,440 h, functionality: fully functional, machine/vehicle number: 91, We are offering this very lightly used Krüsi Krüsimatik G1, year of manufacture 2011, with only 3,440 operating hours. Ffjdjyfwbnopfx Afnsu The machine is available immediately. Manufacturer: Krüsi Maschinenbau AG OFFER - KRÜSIMATIC by Krüsi G1 5-axis machining centre Wood passage: 420x200 mm 5-axis saw unit 5-axis horizontal milling unit 5-axis vertical milling unit Drilling unit Chain mortising unit Discharge roller table 8 m Discharge roller table 8 m (two units listed) CNC control system with cooling unit Compressed air tank Includes complete tooling Operating manual 1 used timber machining line from KRÜSI, type Kruesimatic G1 Year built: 2011 Can be used with all common timber construction software such as Catwork, SEMA, Dietrichs, S & S, Nußreiner, etc. 5-axis system with dovetail router Processing from right to left 6-sided machining without having to turn the timber! Weight: 5.5 t BTL interface for office connection or manual input directly at the machine For increased cutting performance, the feed speed is frequency-controlled and optimised for various crosscuts Platform height without floor pit: 920 mm Offcuts and chips fall into a mobile bin included The system only needs to be connected with plugs to the electrical cabinet Max. timber cross-section: 200 mm x 420 mm System set up and ready for demonstration AVAILABLE IMMEDIATELY The complete system fits on a MEGA trailer Located in 8842 Unteriberg and ready for demonstration Dismantling / Transport / Installation Auf der Maur GmbH Machinery transport Sale from location Waagtalstrasse 42, 8842 Unteriberg, as inspected, without warranty or guarantee. Payment due immediately in full upon receipt of invoice, without deduction. The system can only be collected after full payment has been received. As-is sale with no statutory warranty, guarantee or liability of any kind. "All warranty claims, to the extent permitted by law, are excluded. In particular, rescission and reduction are excluded."

Year of construction: 2009, condition: used, maximum capacity load 5,000 kg *lifting height 15 metres* number of strands 2 load chain 10 x 30 decoiling of hand chain per metre of lifting - 174 m Fsdpfecw Tyiox Afnsfu lifting force at nominal load 34daN weight approx. 115 kg 1 unit on stock - price per unit  

Year of construction: 2021, condition: new, Field of application: Construction Attachment suited for: Loaders Bucket volume: 6.5 m^3 Ffsdpfx Afepa Rnwonju We manufacture high dump bucket sets for all brands-models. The bucket in the photo is made for the Hyundai HL760. The capacity of bucket is 6,5m^3 For detailed information please contact us.

Condition: new, Year of construction: 2023, load capacity: 4,000 kg, lifting height: 5,610 mm, total length: 2,550 mm, Spurbreite vorn 1980mm Breite zwischen den Radarmen 1400mm Lastschwerpunkt 450mm 600mm 600mm Überhang vorne 245mm Radstand 1565mm 1915mm 2115mm Überhang hinten 140mm Nennverlustmaß bis Gabelrücken 1100mm 1100mm 1150mm Anfahrwinkel max. 45° Rampenwinkel max. 29° Abfahrwinkel max. 45° Mastneigung nach vorn 3° Mastneigung nach hinten 5° Wenderadius min. 1950mm 2260mm 2490mm Plattformhöhe 545mm Plattformbreite 850mm 1200mm 1350mm Fahrgeschwindigkeit max. 15 km/h Steigfähigkeit 15% V2003 T Kubota Diesel / 3 ltr. GM LPG 44KW / 48KW Fsdpfx Aexd D R Sjfnefu Fahrzeugelektrik 12 Volt Gabelzinkenabmessung 50x150x850mm 50x150x1200mm 50x150x1350mm Bereifung vorne OD 450mm/Width 200mm

Condition: ready for operation (used), Year of construction: 2017, Demag Overhead Crane Double-Girder Suspension Bridge Crane Inspection logbook available! Fsdpox Eikyefx Afnsfu Double-Girder Suspension Crane: Manufacturer: Liebl Kranbau GmbH Load capacity: 500 kg Year of manufacture: 2017 Crane track gauge: 4500 mm Length: approx. 6 m Width: approx. 5.13 m Chain Hoist: Manufacturer: Demag Model: DC-COM 5-500 Year of manufacture: 2017 Lifting capacity: 500 kg Fine lift speed: 1.1 m/min Main lift speed: 4.5 m/min Hook path: 4 m You are welcome to visit for an inspection. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Technical data may deviate and errors in the item description can occur and are subject to change.

Condition: used, 250 kg Column-mounted Slewing Crane / Articulated Jib Arm Manufacturer: Abus KG Load Capacity: 250 kg Jib Length: 2.70 m (1.50 m + 1.20 m) from pivot point Fjdpfex Ei Dcsx Afnsfu Total Height: 2.96 m With inspection logbook You are welcome to arrange a viewing. We can organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued. A valid VAT ID is required. Prior sale reserved. Visit our shop and check out our other offers. All brand names and trademarks mentioned are the property of their respective owners and are used for identification and descriptive purposes only. Deviation from technical data as well as errors in the description of the article may occur and are subject to change.