Second-hand machinery for sale (2,399)

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, TECHNICAL DETAILS Capacity: 3000 bottles/h Treatment time: 15.8 min Detergent quantity and concentration: 71 kg / 1.8 % Soaking tank volume: 3.983 m³ Duelridfetzcrvohet Soaking tank temperature: 70 °C Volume of rinse tank: 0.781 m³ Temperature of rinse tank: 40 °C Heating system: Steam, 6 bar Water consumption: 3.31 m³ Water pressure: 2 - 3 bar MACHINE DETAILS Machine dimensions: 5,365 x 3,110 x 2,875 mm Weight: 8.3 - 13.83 t Voltage: 400 V, 50 Hz Power consumption: 23 kVA Noise level: 85 dBA

Condition: ready for operation (used), Year of construction: 2005, operating hours: 25,386 h, Functionality: fully functional, Sliding headstock automatic lathe with counter spindle (C-axis) and with 3 XYZ turrets, each with B correction axis TECHNICAL DETAILS Spindle speed: 5000 rpm Z-axis: 1600 mm rapid traverse: 60 m/min Workpiece length: 250 mm Workpiece diameter: 65 mm Workpiece weight: 3 kg Number of turrets: 3 Main spindle Spindle capacity: max. 66 mm Chuck diameter: 140/160 mm Spindle diameter: 110 mm Spindle index: 2.5° Spindle speed: 5000 rpm Spindle power 100/40 %: 20/27 kW Torque 100/40 %: 105 / 145 Nm Counter spindle Spindle capacity: max. 66 mm Chuck diameter: 140/160 mm Spindle diameter: 110 mm Spindle index: 2.5° Spindle speed: 5000 rpm Spindle power 100/40 %: 20/27 kW Torque 100/40 %: 105 / 145 Nm Turret 1 / 2 / 3 Number of tool positions: 12 Turning diameter: 500 mm Traverse path X / Y / Z: 110 / 70 (+40/-30) / 360 mm Rapid traverse X / Z: 25 / 12 / 45 mm Resolution: 0.1 µm B correction axis: ±1° Speed: 6000 rpm Delridfotphqpsheut Power 25%: 8 kW Torque: 16 Nm

Year of construction: 1989, Condition: good (used), Functionality: fully functional, Important: It will take approx. 3 weeks to dismantle. Non-binding cost estimate for dismantling: EUR 78,000 Wiegand 5-stage evaporator with its own cooling tower. Was in operation until 2021. TECHNICAL DATA Capacity and operating data Feed rate: 17500 kg/h; 11° Brix 20 °C Concentrate quantity: 2700 kg/h; 70° Brix 10-15°C Evaporation: 14800 kg/h Dueljtta Hyjridfhet Minimum feed quantity: 10,500 kg/h; 60% Essence quantity: 115 l/h Essence temperature: 5-10 °C Energy data Steam consumption: min 10 bar g for evaporation: 3950 kg/h for essence recovery: 150 kg/h Cooling water requirement: 175 m³/h Connected load for motors of the product and condensate pumps as well as the essence recovery: 90 kW Connected load for the vacuum pumps: 22 kW Outlet temperature of the raw vapour condensate: approx. 20-30 °C Outlet temperature of the clear vapour condensate: approx. 55°C Outlet temperature of the pure condensate: approx. 94°C Description of the system Plant type: Falling film evaporation plant Number of effects: 5 Arrangement of the effects: Parallel flow (1-2-3-4-5) Preheater: external straight tube preheater Heating: Direct steam Condensation system: Surface condensation Vacuum unit: Irrigation vacuum pumps

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,980 h, Functionality: fully functional, working width: 1,300 mm, Wet deburring machine TECHNICAL DETAILS Djlrisvfpvyjdfhjut Working width: 1,300 mm Working height: 900 / 1,000 mm Sanding belt length: 2,620 - 3,250 mm Number of units: 2 (sanding belt + vertical brushes (XVS)) Pre-treatment: Drying + air pressure Mist extraction: available Control system: PLC VISION

Condition: ready for operation (used), Year of construction: 2018, operating hours: 60 h, Functionality: fully functional, total length: 41,823 mm, working width: 800 mm, roller diameter: 50 mm, working height: 700 mm, Parcel transport system with weighing unit TECHNICAL DETAILS Transport system length: approx. 42 m Transport system width: 800 mm Roller diameter: 50 mm Working height: 700 mm Roller material: galvanized Roller spacing: 75 mm Table and frame material: made of electrostatically painted sheet metal and steel profiles Drive of the conveyor belt: Three-phase asynchronous motor and worm gear Weighing unit: gravity rollers ASSEMBLY (starting from bottom left) Number of system elements: 8 Straight element: 5,000 mm, 1.5 kW Weighing unit: 1,500 mm, 0 kW Straight element: 5,000 mm, 0.55 kW Straight element: 10,000 mm, 55 kW 180° curve: 5,267 mm, 0.36 kW Straight element: 10,000 mm, 55 kW 180° curve: 3,556 mm, 0.18 kW 30° merge element: 1,500 mm, 0.55 kW Dslridoukrvpsfhout CONTROL AND ELECTRICS - Thermal and electrical protection elements especially for electric motors - Control button with indicator light, main switch, Schneider Electric brand start/stop control button - Operating pedal - Frequency inverter for motors - Sensors for product detection in the curved area - Does not contain any other automation elements (PLC, specific automation software)

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 4811/0816, TECHNICAL DETAILS Maximum width: 1000 mm Minimum length of the veneer strip: 350 mm Minimum width of the veneer strip: 45 mm Veneer thickness: 0.3 - 1.5 mm Adjustable feed speed: 20- 50 m/min Length of the heating surface: 1200 mm Temperature control: 0 - max. 220°C Height of the work table: 970 mm MACHINE DETAILS Total power: 9.3 kW Average power: 5 kW Feed power: 2.2 kW Heating guide: 0.46 kW Operating voltage: 400 V, 3 Ph, 50 Hz Fuse protection of the small circuit: Max. 32 A Compressed air connection: G 1/4''/ 9 mm Compressed air: 6 bar Compressed air requirement: approx. 30 NL/min Net weight: 2050 kg Required floor space: 2370 x 1969 x 1470 mm (1770 mm control cabinet height) Dueljtwcx Aeridfhot Size of the transport package: 8.23 m3

Condition: ready for operation (used), Year of construction: 2018, Functionality: fully functional, table width: 980 mm, table length: 750 mm, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH Dujlrjvxtikjidfhjt TECHNICAL DETAILS Max. clamping force: 300 kN Max. load capacity of the lower plate: 4,000 kg Max. load capacity of the upper plate: 1,200 kg Swivel angle: 360° Table data Table dimensions: 980 x 750 mm Passage: 1,090 x 920 mm MACHINE DETAILS Machine weight: 3,900 kg Dimensions: 2,200 x 1,900 x 2,300 mm EQUIPMENT Energy storage (impact trigger) Special wax injection unit User-friendly control panel with graphics

Condition: excellent (used), Year of construction: 2020, operating hours: 856 h, Functionality: fully functional, machine/vehicle number: LLR20200130, travel distance X-axis: 1,300 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 800 mm, controller manufacturer: Syntec, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 8, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Working area (XYZ): 1,300 x 2,500 x 800 mm C-axis swivel range: ±360° A-axis swivel range: ±220° Resolution: ±0.01 mm Operating language: G-code Control: Syntec 5-axis control with RTCP function and independent dashboard Spindle Spindle: Hiteco 12 kW QS-2, water cooled Spindle head: ACCTEK with two axes Speed: 6,000 - 24,000 rpm Collet: ER40 Spindle cooling: liquid Tools and table Tool changer: 8-position carousel type Holder: HSK63F Table: Vacuum table, T-slots Motor power X-axis Motor power: 1,800 W Y-axis motor power: 1,300 W (dual drive) Dujlrjvy Eb Ieidfhst Z-axis motor power: 2,800 W A-axis motor power: 400 W C-axis motor power: 750 W Speeds and accuracy Control: Syntec 5-axis control with RTCP function X,Y positioning accuracy: ±0.03 mm Z positioning accuracy: ±0.02 mm Max. travel speed A & C axis: 170 degrees/sec. Maximum XY axis travel speed: 45,000 mm/min Maximum Z axis travel speed: 15,000 mm/min X axis feed rate: ≤45 m/min Y axis feed rate: ≤60 m/min Z axis feed rate: ≤15 m/min MACHINE DETAILS Construction: Heavy-duty welded steel construction Certification: CE certified Power requirement: 380V, 50Hz, 3-phase Inverter: Delta 15 kW Gearbox: Shimpo EQUIPMENT - Dust extraction - Automatic oil lubrication (HYCNC) - Teyu water chiller CW5000 - Vacuum pump: 5.5 kW oil-free - UG software - Tool holders, collets and USB drive included

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 15 h, Functionality: fully functional, measuring range X-axis: 3,000 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 1,500 mm, 7-axis probing and scanning measuring arm with integrated LASER scanner. No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Measuring range: 3.0 m Probing point repeatability: 0.042 mm Probing volumetric accuracy: ± 0.058 mm Scanning system accuracy SI (with RS2): 0.083 mm Weights Arm weight SI: 9.2 kg Djlrievpgi Esdfheut Ambient conditions Working temperature: 0°C to 50°C Storage temperature: -30°C to 70°C Relative humidity: 10% to 90%, non-condensing Operating altitude: 0 to 2,000 m CE conformity: Yes Universal voltage worldwide: 110 V to 240 V

Condition: new, Year of construction: 2021, Functionality: fully functional, sheet thickness steel (max.): 26 mm, roller (top) diameter: 290 mm, roller diameter: 210 mm, roller (bottom) diameter: 270 mm, bending length: 2,050 mm, TECHNICAL DETAILS Sheet thickness (max.): 26 mm Diameter of the roller (top): 290 mm Roller diameter: 210 mm Diameter of the roller (bottom): 270 mm Bending length: 2,050 mm Dslrjvfptrjidfhout MACHINE DETAILS Dimensions: 4,103 x 1,623.2 x 1,540 mm Warranty period: 12 months Power: 18.39 kW (25.00 hp) EQUIPMENT - Documentation/manual

Condition: good (used), Year of construction: 2007, operating hours: 74,627 h, Functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, plate length: 710 mm, plate width: 630 mm, Machine was in use until December 2024! TECHNICAL DETAILS Screw diameter: 70 mm Injection pressure: 1,877 bar Displacement: 1,212 cm³ Delrievvtplsdfheut Clamping force: 3,500 kN Mold holder Distance between the tie bars: 710 x 630 mm Minimum mold thickness: 330 mm Maximum tool thickness: 710 mm Maximum distance between the clamping plates: 1,385 mm MACHINE DETAILS Total length: 7,700 mm Total width: 2,000 mm Total height: 2,300 mm Total weight: 16,000 kg EQUIPMENT - Documentation - Manuals

Condition: refurbished (used), Functionality: fully functional, center height: 175 mm, grinding length: 1,000 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 400 rpm, controller manufacturer: Fanuc, controller model: 0i-TF Plus, Completely overhauled cylindrical grinding machine Kellenberger R175x1000 CNC - unused since then! The machine was completely refitted in collaboration with Fanuc and includes: - New control cabinet and new circuit diagram - New CNC control Fanuc 0i-TF Plus - New servo motors and servo drives Fanuc - New balancing system Elaso with GAP - Grinding wheel loader  - Cooling tank with paper filtering - Geometry according to the Kellenberger protocol Djlevmqlljridfheut TECHNICAL DETAILS Control: Fanuc 0i-TF Plus Centre height: 175 mm  Centre distance: 1000 mm Speed: Workpiece spindle head: 20 - 400 rpm C-axis: available Programming: Programs can be created with G-codes or via the user-friendly interface Table angle shift: 8° (for long parts) Headstock inclination: 90° (for short parts that do not require a tailstock) Table speed: max. 10.0 m/min (infinitely variable) External grinding: possible Internal grinding: not possible Tip grinding: up to 6 different diameters on the same piece Taper grinding: the machine has a table that can be tilted up to 8 degrees for long parts, and for short parts that do not require a tailstock, the headstock can be tilted up to 90 degrees.

Condition: good (used), Year of construction: 2011, operating hours: 12,926 h, Functionality: fully functional, machine/vehicle number: 12160000083, travel distance X-axis: 936 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 651 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 30, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-travel: 936 mm Y-travel: 850 mm Z-travel: 651 mm Spindle speed: 10,000 rpm Dolridevxtgvefhsut Magazine size: 30 MACHINE DETAILS Dimensions: 5.1 x 3.1 x 3.2 m Weight: 11.4 t Connection power: 63 kVA Operating voltage: 400 V, 50 Hz Program run: 36,373 h Spindle hours: 12,926 h EQUIPMENT - without magnetic table

Year of construction: 1979, Condition: refurbished (used), Functionality: fully functional, TECHNICAL DETAILS Height of centers: 125 mm + heights of 50 mm distance between centers: 1.000 mm Grinding wheel ' diameter: 400 mm ' width: 50 mm ' Bore: 127.0 mm angular displacement: 270 ° workpiece spindle head: 20 - 400 rpm taper of the spindle: 5 MT Taper in the tailstock: 3 MT table angular displacement: 8 ° Table speed: infinitely variable up to 6.0 m/min Internal grinding spindle with 60 000 rpm External grinding wheel motor: 4,0 kW Workpiece spindle motor: 1,5 kW Weight machine: 3.100 kg Overall machine dimensions: 2,860 × 1,680 × 1,670 mm (L × W × H) EQUIPMENT & SCOPE OF DELIVERY - Machine was completely retrofitted - New control cabinet & new wiring diagram - New motor & frequency converter for the working head - 2 axes DRO - Cooling tank with paper filtering - Geometry made according to the Kellenberger protocol - Internal grinding spindle - Many accessories Duelridek H Hp Nefhst Please refer to the attachment below for a test report on the machine.

Condition: excellent (used), Year of construction: 2016, operating hours: 5,248 h, Functionality: fully functional, laser power: 4,000 W, sheet thickness aluminum (max.): 15 mm, sheet thickness steel (max.): 20 mm, sheet thickness copper (max.): 8 mm, sheet thickness brass (max.): 8 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 70 mm, TECHNICAL DETAILS Travel X x Y: 4000 x 2000 mm Cutting area X x Y x Z: 4064 x 2032 x 70 mm Workpiece weight: 1270 kg Positioning speed per axis / simultaneous: 100 / 140 m/min Axis acceleration: 12 m/s² Positioning accuracy: ±0.1 mm Repeat accuracy: ± 0.05 mm Edge detection accuracy: ± 0.5 mm Table: shuttle table system Laser source: Fiber 4000 Power: 4000 W Duslrist E Sxmedfhjt Wavelength: 1µm Polarization: unpolarized Pulse frequency: 1 - 2500 Hz Sheet thickness steel: 20 mm Sheet thickness aluminum: 15 mm Sheet thickness stainless steel: 15 mm Sheet thickness copper: 8 mm Sheet thickness brass: 8 mm MACHINE DETAILS Dimensions: 12.9 x 6.75 x 2.5 m Weight: 15 tons Power: 25 kW Switch-on time: 23,477 h Laser switch-on time: 5,248 h

Condition: good (used), Year of construction: 2001, Functionality: fully functional, spindle speed (max.): 4,500 rpm, turning diameter: 300 mm, turning length: 110 mm, spindle diameter: 260 mm, Delivery: approx. 6,000 € to each port - CIF; shipping costs, insurance and freight to the port of destination Provision: either FCA from location or CIF from port of choice TECHNICAL DETAILS Number of axes: 4-axis Control: GE Fanuc Series 18i TB Turning diameter: 300 mm Turning length: 110 mm Spindle speed: max. 4,500 rpm Spindle diameter: 260 mm Dolridfovhccljhsut Spindle holder: VDI 40 EQUIPMENT - Complete accessories - manuals

Condition: good (used), overall weight: 10,362 kg, Year of construction: 2018, Walter Schmitz Steam Turbine Rotor Weight 10362kg; Duolridjva Iihsfhst Container weight 4938kg; Year built 2018;

Condition: good (used), Year of construction: 2011, operating hours: 41,625 h, Functionality: fully functional, machine/vehicle number: 29180004734, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, rotational speed (max.): 28,000 rpm, number of slots in tool magazine: 30, swivel angle A-axis (min.): -10 °, swivel angle A-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, Machining center including automation and increased spindle speed! Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-axis: 750 mm Y-axis: 600 mm Z-axis: 560 mm Swivel axis (A/B): -10° / +110° Rotary axis (C): 360° Main drive Speed: 28,000 rpm Drive power (40% / 100% ED): 55 / 43.5 kW Torque (40% / 100% ED): 47.8 / 38 Nm Tool holder: HSK-A63 Tool magazine: 30 Feed Feed range: 90,000 mm/min Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min Duolriovxtcwodfhet Work table Clamping surface (NC rotary table): 750 mm Max. workpiece weight: 800 kg MACHINES DETAILS Automation: Erowa Easy Dimensions: 3,400 x 2,750 x 3,400 mm Weight: 10.9 t Connected load: 73 kVA Operating voltage: 400 V, 50 Hz Program run: 91,803 h Spindle hours: 41,625 h EQUIPMENT - without magnetic table

Condition: excellent (used), Functionality: fully functional, wheel width: 152 mm, table diameter: 120 mm, wheel diameter: 150 mm, distance between centers: 265 mm, module thread tooth pitch (max.): 5, travel distance milling slide X-axis: 250 mm, swivel angle A-axis (min.): -45 °, swivel angle A-axis (max.): 45 °, Delivery: approx. 6,000 € to each port - CIF (shipping costs, insurance and freight to the port of destination) Provision: either FCA from location or CIF from port of choice TECHNICAL DETAILS Machine type: 6-axis CNC hobbing machine Control: Siemens 840D Condition: Completely overhauled in 2010 Machining parameters Gear diameter: max. 150 mm Module: max. 5 disk width: 152 mm Cutter slide: max. 250 mm Adjustment path: 200 mm Swivel range of the hob: ± 45° Delrijvhcbusdfheut Table data Table clamping surface: 120 mm Minimum/maximum distance between the centers: 15 / 265 mm EQUIPMENT - completely overhauled - complete with all parts and accessories

Condition: good (used), Year of construction: 2018, operating hours: 27,240 h, pressure: 97 bar, power: 40,554 kW (55,138.03 HP), overall weight: 100,000 kg, rotational speed (min.): 4,648 rpm, MAN Diesel & Turbo SE DK080/250R Industrial Steam Turbine Duslsva Ih Dsridfhet Year Built 2018; installed date 2020; starting for production Jan. 2021; working hours 27240H (just for reference); power 40554 KW; speed 4648 rpm; Inlet pressure Normal/Max 97/101 bar; Inlet Temperature Normal/Max 525/535 ℃; weight 100,000kg each; size 5900x5330x5170mm each; includes HTAC surface cooler & extractor; Sulter Dalian condensate pump; Condition installed; the technical information available upon request

Condition: ready for operation (used), Year of construction: 2007, operating hours: 29,655 h, Functionality: fully functional, machine/vehicle number: 73.110, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, table width: 1,100 mm, table load: 1,600 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 92, swivel angle A-axis (min.): -120 °, swivel angle A-axis (max.): 16 °, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH Delovxr I Eoridfhjut TECHNICAL DETAILS X-axis (longitudinal): 1,350 mm Y-axis (transverse): 1,150 mm Z-axis (vertical): 700 mm A-axis: +16° / -120° C-axis: n x 360° Simultaneously controllable axes: 5 axes Control: Heidenhain iTNC 530 Spindle speed: 12,000 rpm Tool magazine: 92 slots Feeds and travel speeds X and Y axis: 15 / 30 m/min Z axis: 15 / 30 m/min A axis: 11 / 20 rpm C axis: 40 rpm Work table Clamping surface: Ø 1,100 mm Max. workpiece weight: 1,600 kg MACHINE DETAILS Machine: 12,600 kg Dimensions: 4,650 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise protection level: 68 dB(A) Program run: 34,205 h Spindle hours: 29,655 h EQUIPMENT - without magnetic table

Condition: good (used), Year of construction: 2018, operating hours: 13,993 h, pressure: 97 bar, power: 40,554 kW (55,138.03 HP), overall weight: 100,000 kg, rotational speed (min.): 4,648 rpm, MAN Diesel & Turbo SE DK080/250R Industrial Steam Turbine Year Built 2018; installed date 2020; starting for production Oct 2020; production stop Jul 2022; working hours 13993H; power 40554 KW; speed 4648 rpm; Inlet pressure Normal/Max 97/101 bar; Inlet Temperature Normal/Max 525/535 ℃; weight 100,000kg each; size 5900x5330x5170mm each; includes HTAC extractor, Sulter Dalian Condensate Pump; Condition dismantled by OEM; the technical information available on request Duoleva Ifvjridfhot

Condition: ready for operation (used), Year of construction: 2006, operating hours: 21,967 h, Functionality: fully functional, machine/vehicle number: 84.34, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, table width: 1,000 mm, table load: 1,100 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 46, swivel angle A-axis (min.): -120 °, swivel angle A-axis (max.): 16 °, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-axis (longitudinal): 1,000 mm Y-axis (transverse): 1,150 mm Z-axis (vertical): 700 mm A-axis: +16° / -120° C-axis: n x 360° Simultaneously controllable axes: 5 axes Control: Heidenhain iTNC 530 Spindle speed: 15,000 rpm Tool magazine: 46 slots Feeds and travel speeds X and Y axis: 15 / 30 m/min Z axis: 15 / 30 m/min A axis: 11 / 20 rpm C axis: 40 rpm Work table Clamping surface: Ø 1,000 mm Max. workpiece weight: 1,100 kg Djlridovxr Iljfhout MACHINE DETAILS Machine: 12,300 kg Dimensions: 4,600 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise protection level: 68 dB(A) Program run: 40,095 h Spindle hours: 21,967 h EQUIPMENT - without magnetic table

Condition: ready for operation (used), Year of construction: 2008, operating hours: 41,370 h, Functionality: fully functional, machine/vehicle number: 592.100.023, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, table width: 400 mm, table length: 600 mm, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-Y-Z travel paths: 350 x 250 x 300 mm X/Y axis speed: 6 m/min Z axis speed: 15 m/min Integrated C axis: ACURA-C Duslovxrqtoridfhot Working area Working tank dimensions: 900 x 630 x 350 mm Dielectric unit content: 500 l Max. table dimensions: 600 x 400 mm Distance floor/table: 1,000 mm Min./Max. Distance between table and quill: 170 / 520 mm Workpiece and electrode Max. electrode weight: 50 kg Max. workpiece weight: 800 kg Max. workpiece dimensions: 820 x 580 x 250 mm Filling height: 0 - 290 mm Tool and electrode changer Electrode changer: 40 places Number of tools: 60 Generator type: ISPG Working current: max. 60 A Robot Easy ERE-009410 Base: Robot Easy UPC Max. transfer weight: 250 kg (for UPC pallets) Control: EROWA control and interface cable Control: Pneumatic chucks Gripper: RCS 5 Magazine plate: UPC with 4 positions (320 x 320 mm) Total weight: 1,500 kg Cooling Control cabinet: Integrated air/water heat exchanger Dielectric: Integrated dielectric/water heat exchanger Control Operating system: Windows XP Data input: 15" LCD color screen, mouse or touchscreen Software: AGIEVISION 5 or DPControl MACHINE DETAILS System dimensions: 1,410 x 2,460 x 2,660 mm System dimensions including robot: 2,600 x 2,500 x 2,700 mm Net weight without dielectric: 3,830 kg Space requirement: 3,400 x 4,400 mm Fire extinguishing system: Automatic CO2 fire extinguishing system Form 2000 Switch-on time: 100,549 h EDM hours: 41,371 h EQUIPMENT - Automatic CO2 fire extinguishing system Form 2000 - Robot Easy ERE-009410 with EROWA control, gripper RCS 5, and magazine plate UPC - MTS Gripper Link Rapid - Integrated air/water heat exchanger and dielectric/water heat exchanger - Without magnetic table

Condition: good (used), IWT Utensil / Crate Washer Model 9LAV65 Dolrijwh A E Eodfhsut Year 2009 316 stainless steel throughout. Pull out twin racks, both are removable, dimensions of each rack 1400mm W x 900mm D 330mm between racks Total wash area 1400mm W x 760mm H 3 dosing pumps - wash agent, detergent, rinse agent Also one mobile rack on castors for unloading of washed product on removable racks Heating source - hot water or steam Wash pump and rinse pump Digital control panel Stainless mesh screen filter in main wash area