Second-hand machinery for sale (2,359)

Condition: not inspected (used), Year of construction: 1981, Functionality: unexamined, HOMAG single-sided edge banding machine type KL39/9C/S 3D Dujlqsrn Sp Sjx Tihst

Condition: ready for operation (used), Year of construction: 2016, Functionality: fully functional, pressure: 11.1 bar, operating pressure: 6 bar, temperature: 102 °C, TECHNICAL DETAILS Design: three-pass design for low-NOx operation Installation: inside Altitude: 400 m Feed water reference temperature: 102 °C Gross steam output: max. 820 kg/h Nominal boiler output: 530 kW Operating pressure: max. 6 bar Test pressure: 11.1 bar Operating pressure: approx. 3 bar Exhaust gas loss with Eco Gas/Oil: max. 7.4/6.8 mbar Exhaust gas temperature after Eco: 119 °C Boiler efficiency with Eco: 95.2% Contents Total water volume: 3.25 m³ Water volume up to NW with Eco 200: 2.50 m³ Dujlqxovr Tkue Tihot Average working range: 2.47 m³ Steam water volume: 0.70 m³ Feed water volume: 2.45 m³ MACHINE DETAILS Mains voltage: 3 x 400 V 50 Hz Boiler length: 3,640 mm Boiler width: approx. 1,700 mm Boiler height (incl. Eco 200): 3,760 mm Flame tube diameter: 556 mm Flame tube length: 2,100 mm Weights Transport weight: approx. 3.5 t Operating weight (pressure test): approx. 6.75 t Nominal connection diameters on the boiler Main steam: DN/PN 80/16 Safety valve: DN/PN 25/40 Feed water: DN/PN 25/40 Blowdown: DN/PN 25/40 Ventilation: DN/PN 15/40 Flue gas connection outside/inside: DN/PN 224/216

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, Functionality: fully functional, power: 11 kW (14.96 HP), screw diameter: 250 mm, TECHNICAL DETAILS Materials: Wood, miscanthus, agricultural by-products and waste products (hay, straw, corn straw), animal feed and others Type: Complete system (compact system) Assembly: Built on a base frame Output: 180 kg/h (depending on raw materials and other factors, value here for softwood) Components Storage container: 4 m³ for raw material, including agitator Intermediate screw: Diameter 250 mm, for feeding the hammer mill Hammer mill: Drive power: 11 kW, for crushing raw material (e.g. wood chips) Slant mixer: For raw material, including level sensors and fully automatic moisture dosing Duelqxsvhbx So Tihot Dosing container: For pressing aids (e.g. corn starch) Dosing screw: Speed-controlled, for optimal material feeding of the press Press: Drive power: 11 kW, with horizontal Round die, discharge chute, temperature monitoring and overfill protection Conveyor belt: For transporting the pellets away, discharge height: approx. 2.5 m Drum sieve: For dedusting and cooling the pellets Control system Type: Siemens PLC Operation: Touch display Monitoring: Permanent monitoring of all parameters with automatic shutdown in the event of problems Operational expansion Design: System is prepared for the operation of a second press EQUIPMENT The system includes a central control system, conveyor belt for pellet transport, drum sieve for cooling and dedusting, as well as components for material dosing and monitoring.

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2013, operating hours: 29,623 h, load capacity: 15,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,400 mm, fuel: diesel, TECHNICAL DETAILS Drive: Diesel Load capacity: 15,000 kg Load center of gravity: 600 mm Lifting height: 5,500 mm Free lift: 2,800 mm Mast type: Duplex Fork length: 1,400 mm MACHINE DETAILS Length: 4,850 mm Overall width: 2,550 mm Overall height: 4,400 mm Dead weight: 23,580 kg Front tires type: Superelastic Doleuh Ucljqx Tihsut Front tires Size: 12.00-20 Rear tires Type: Superelastic Rear tires Size: 12.00-20 EQUIPMENT - Sideshift - Tine adjuster - Heating system - Full cab - Full free lift

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: T33100-0636, Year of construction: 1996, operating hours: 21,419 h, load capacity: 16,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: standard, construction height: 3,650 mm, TECHNICAL DETAILS Machine type: Diesel forklift Load center: 900 mm Load capacity: 16,000 kg Mast and fork Mast type: Standard Lifting height: 3,700 mm Fork length: 2,180 mm Fork width: 350 mm Fork thickness: 75 mm Fork carriage width: 2,500 mm Tires Front tires type: Air Front tires size: 12.00-20 Rear tires Type: Air Dujleulyhpsqx Tihjt Rear tires Size: 12.00-20 MACHINE DETAILS Drive type: Diesel Overall length: 5,200 mm Overall width: 2,550 mm Overall height: 3,650 mm Net weight: 22,220 kg EQUIPMENT - Heating system - Full cabin

Condition: excellent (used), Year of construction: 2006, operating hours: 56,700 h, Functionality: fully functional, screw diameter: 85 mm, injection pressure: 2,110 bar, injection weight: 2,195 g, Machine type: Battenfeld injection molding machine HM 500/5100 Year of manufacture: 2006 Working hours: 56.700 Control system: Unilog B6 Injection system Screw diameter: 85 mm Specific injection pressure: 2,110 bar Injection volume: 2,412 cm³ Injection weight: 2,195 g Clamping system Clamping force: 500 t Mold platen dimensions: 1,470 mm x 1,260 mm Free space between the columns: 900 mm x 720 mm Height of the molds: 450 mm Opening stroke: 1,150 mm Max. Distance between the plates: 1,600 mm Stroke of the ejector: 250 mm Electrical power Power of the pump motor: 75 kW Dslqou Dawvjx Tiheut Output of the cylinder heating band: 37.3 kW Instrumentation EUROMAP 67 Robot connection 1 x hydraulic core on fixed plate 1 x hydraulic core on moving platen 8 x hot runner control Bimetallic injection system Ejector plate General data Dimensions: 6.9 x 2.4 x 3 m Weight: 26,000 kg

Condition: not inspected (used), Year of construction: 2004, Functionality: unexamined, HOMAG edgebanding and processing line, KF 61/08/QA/25 edgebanding machine, KF-63/08/QE/15 edgebanding machine, Optimat TDL 310/25/12 turntable, year of manufacture 2004, Deljrn Sl Isqx Tiheut L=25 m

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, measuring range X-axis: 905 mm, measuring range Y-axis: 1,005 mm, measuring range Z-axis: 605 mm, TECHNICAL DETAILS Year of manufacture: 2012 Year of installation: 2014 Control: Mitutoyo UC240 Software: Mitutoyo MCOSMOS-1 3.5 Probe: Renishaw PH10MQ/TP7 Measuring range X-axis: 905 mm Y-axis: 1,005 mm Z-axis: 605 mm Length measurement uncertainty ISO 10360 MPEE: 2.5 + 3.5L/1,000 µm (18 - 22 °C) Measuring table material: steel Mounting holes: M8 x 1.25 Scale system: Mitutoyo Linear Scales Resolution: 0.0001 mm Motorization Motors: DC motors with digital encoders Bearing of the measuring axes: linear guides EQUIPMENT - Renishaw PH10MQ with PHC10-2 (used) Dujlqxovmfmde Tihjt - Renishaw TP7 with optional ACR-3 (used) - Computer Workstation WIN 10 can also be purchased: - SP25M + FCR Rack instead of TP7 - PH10MQplus upgrade

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, HIGHLIGHTS - With manufacturer's warranty - Single-layer single chamber; flexible working mode with several modes to choose from - Highly efficient cleaning system - Intelligent control mode - Energy-saving design - Standard industrial control mode, automatic PLC processing, touch screen operation - Intelligent PID temperature control, high precision and interference protection TECHNICAL DETAILS Panel coating size: 7,800 × 2,400 mm Chamber opening height: maintenance 300 mm / continuous 100 mm Coating chamber height: 25 mm Average conveyor speed: 8 - 16 m/min Working height in conjunction with the assembly line: 1150 ± 10 mm Dolqx Tistqnq Ujhsut Control mode: Touchscreen control Temperature control: PLC Intelligent Heating mode: Oil heating Temperature consistency: ± 1.5 ℃ Temperature accuracy: ± 1 ℃ Temperature range: room temperature - 160 ℃ Vacuum pumping speed: 600 l/s Compressed air flow rate: max. 600 l/min Compressed air pressure: 0.6 - 0.8 MPa MACHINE DETAILS Dimensions: 24,700 × 3,410 × 1,850 mm Weight: 25 tons Power supply: 380 V, 50Hz; 3 phases; 5 lines Total output: 108 kW Running power: 46 kW DESCRIPTION - The machine is heated by heat transfer oil to increase the temperature uniformity, temperature control accuracy and integrated performance, and improve the overall compatibility of the equipment. - Individual chambers, loading conveyors and unloading conveyors run together for high quality modules and a high degree of automation. - Stable and continuous loading and unloading device. Variable frequency conveying system, accurate position and conveying speed is adjustable. - Intelligent control, PLC automatic processing, touch screen operation and display function. - Upper and lower chambers of the coating chamber are equipped with PTFE Teflon sheet (cleaning system available) - For optimal gas flow conditions, the entire vacuum system is uniformly arranged so that gas suction and release is uniform and stable in all chambers. - The entire system is controlled by a solenoid valve and PLC, is operated and data displayed via a touch screen, and is equipped with a vacuum pressure sensor that displays and monitors the vacuum in the chamber in real time. - The entire heating system of the heating plate is designed and arranged according to the optimal conditions of fluid mechanics and heat transfer theory to ensure temperature uniformity, reduce pressure and reduce energy consumption.

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2002, operating hours: 7,355 h, load capacity: 5,000 kg, lifting height: 5,950 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, fuel: electricity, TECHNICAL DETAILS Drive: electric Load capacity: 5000 kg Load center of gravity: 700 mm Lifting height: 5950 mm Free lift: 1900 mm Mast type: Triplex Fork carriage width: 1,250 mm Telescopic forks: 165 x 70 x 1,400 / 2,400 mm Platform height: 850 mm MACHINE DETAILS Length: 4500 mm Construction width: 2200 mm Overall height: 2860 mm Front tires type: Superelastic Front tires size: 27x10-12 Rear tires Type: Superelastic Rear tires Size: 27x10-12 Battery Volt: 80 V Charging capacity: 840 Ah Battery year of construction: 2015 EQUIPMENT - Fork positioner - Heating system - Full cab Delqxstwdmuo Tiheut - Full free lift - loader

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2015, operating hours: 15,384 h, load capacity: 16,000 kg, lifting height: 4,610 mm, fuel type: diesel, mast type: standard, construction height: 3,160 mm, fork carriage width: 2,650 mm, total length: 5,520 mm, fuel: diesel, TECHNICAL DETAILS Load capacity: 16,000 kg Center of gravity: 1,200 mm Mast: Standard Mast height: 3,960 mm Djlqjtwphqjx Tihjut Lifting height: 4,610 mm Fork carriage width: 2650 mm Fork positioner: 700 / 2350 mm Forks: 350 x 75 x 1700 mm MACHINE DETAILS Engine: Diesel Weight: 24,140 kg Tires: Pneumatic 12.00-20 Length: 5,520 mm Width: 2,520 mm Forklift height: 3,160 mm EQUIPMENT - Sideshift - Cabin - heater - Scales

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, clamping force: 10 kN, screw diameter: 120 mm, injection pressure: 1.65 bar, injection weight: 4,936 g, TECHNICAL DETAILS Machine type: Injection molding machine Engel ES 7050/1000 DUO Year of manufacture: 2002 Robot: Engel ERC83/1-E Clamping unit Clamping force: 10,000 kN Dimensions of the clamping plate (h x v): 2,000 mm x 1,830 mm Free space between the columns (h x v): 1,400 mm x 1,150 mm Djlqx Teu Dav Sjiheut Minimum/maximum mold height: 400 - 1,200 mm Maximum opening width: 1,800 mm Injection unit Screw diameter: 120 mm Injection volume: 5,430 cm³ Injection size: 4,936 g Injection pressure: 1,650 bar Dimensions and weight Net weight with control cabinet: 65 t

Condition: ready for operation (used), Year of construction: 2013, operating hours: 50,000 h, Functionality: fully functional, laser power: 2,000 W, travel distance X-axis: 6,500 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 95 mm, pipe diameter: 120 mm, travel distance W-axis: 85 mm, swivel angle A-axis (max.): 360 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-tube axis: 6,500 mm Y-beam guidance axis: 170 mm Z-beam guidance axis: 95 mm A rotation axis (chuck): n x 360° A1 rotation axis (steady rest): n x 360° W unloading piece support: 85 mm Control: Siemens Sinumerik 840D Operating hours: approx. 50,000 h Speeds X-tube axis: 90 m/min Y-beam guidance axis: 30 m/min Z-beam guidance axis: 22.5 m/min A rotation axis (chuck): 750°/s A1 rotation axis (steady rest): 750°/s Accuracy Position accuracy of interpolated axes: ± 0.05 mm Reproducibility: ± 0.03 mm Position deviation: ± 0.1 mm Workpiece dimensions Max. raw material length: 6,500 mm Min. remaining tube length: 160 mm Length of finished part: 4,500 mm Delqxevy Am Io Tihsut Min. tube diameter: 12 mm Max. outer circle diameter: 120 mm Min. edge length for rectangular and square tubes: 12 mm Max. circle diameter for labeled rectangular/flat oval tubes: 140 mm Max. weight of workpiece: 13.5 kg/m Laser source Manufacturer: Rofin Sinar Model: DC020 Max. laser power: 2,000 W Beam mode K-factor: >0.9 Sheet thickness Sheet thickness mild steel (O2): 6 mm Sheet thickness stainless steel (N2): 4 mm Sheet thickness aluminum alloy (N2): 3 mm Consumption values Laser gases: Premix gas bottle in the laser source (replace every 12-18 months) Cutting gas consumption: O2 or N2, depending on material and part geometry Electrical consumption: 20 - 40 kW/h (varies depending on material and geometry) Compressed air consumption: 30 Nm³/h

Year of construction: 2007, Condition: good (used), Functionality: fully functional, machine/vehicle number: 203 / 232, HIGHLIGHTS - cost-reduced ECO model - with effective and gentle HELICAL washing system - HELICAL washing system makes the machine versatile and space-saving - reduced water consumption with perfect washing results - optimal separation of foreign bodies - for example sand, stones and insects - continuous washing process - with automatic filling no operator necessary - washing, disinfection, mixing and rinsing possible in one machine - usable for e.g. lettuce, vegetables, herbs and fruit, both for cut and whole products - ideal accessibility for cleaning and maintenance Dslqx Tenl Dzxsihjut TECHNICAL DETAILS capacity: 1800 kg/h inlet height: 1103 mm Outlet height: 771 mm Water tank: 785 l Water outlet: 2 x 2". Fresh water connection: 2 x 3/4 inch (GEKA coupling) MACHINE DETAILS power: 5,7 kW voltage: 3 ~ 400 V; N/PE dimensions: 3807 x 991 x 1500 mm weight: 583 kg

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 450 mm XYZ positioning resolution: 0.001 mm XYZ measuring resolution: 0.0005 mm Spindle-to-table distance: 150 - 600 mm Collision protection: X, Y, Z Axis speed: 0 to 900 mm/min Max. workpiece size (L × W × H): 1,000 × 700 × 370 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 kg Clamping table dimensions: 700 × 500 mm Number of T-slots: 4 Dielectric system Filters: 6 paper filters Dielectric volume: 500 l Heat exchanger: Standard Filter change during machining: Standard Filling pump flow rate: 200 l/min Flushing Flushing via electrode: 1 × Flushing through the workpiece: 1 × Lateral rinsing: 2 × Extraction: 1 × Generator Max. machining current: 64 A Power consumption: 5 kVA Best achievable surface finish: CH 12 / Ra 0.4 µm Polishing option: CH 0 / Ra 0.1 µm Suitable technologies for: Copper / steel, graphite / steel, copper-tungsten / hard metal MACHINE DETAILS Machine dimensions (L × W × H): 2,300 × 1,570 × 2,900 mm Transport height: 2,370 mm Total weight (including reservoir): 3,600 kg Duelqsv Tp Edjx Tihst EQUIPMENT - Linear glass scales on all axes - Collision protection on all axes - Standard heat exchanger and filter system - Various rinsing options with extraction - Technology compatibility for copper, graphite, and tungsten carbide - Optional polishing function with 0.1 µm roughness

Condition: used, Functionality: fully functional, Year of construction: 2000, operating hours: 4,990 h, TECHNICAL DETAILS Length: 8000 mm Overall width: 2780 mm Overall height: 3320 mm Dead weight: 19000 kg Loading shovel width: 2800 mm Technical condition: poor Front tires type: Air Djlstwn T Esqx Tihjut Front tires size: 23 5-25 Rear tires Type: Air Rear tires Size: 23 5-25 EQUIPMENT Heating system Full cabin

Condition: excellent (used), Year of construction: 2020, operating hours: 9,900 h, Functionality: fully functional, clamping force: 800 kN, screw diameter: 25 mm, injection pressure: 2.025 bar, ejector force: 22 N, ejector stroke: 150 mm, TECHNICAL DETAILS Closing force of the mold: 800 kN Mold opening force: 120 kN Clamping platen dimensions (h x v): 640 x 590 mm Clearance between the columns (h x v): 485 x 435 mm Opening stroke of the mold: 350 mm Mold height: 150 - 400 mm Opening width: 750 mm Ejector stroke: 150 mm Ejector force forwards/backwards: 22 / 10 kN Ejector speed: 350 mm/s Injection unit Screw diameter: 25 mm Ratio Ls/D: 20 Injection pressure: 2.025 bar Injection volume: 49 cm³ Injection weight: 45 g Injection speed: 125 mm/s Injection capacity: 61 cm³/s Screw speed: 382 1/min Plasticizing capacity: 7.8 g/s Torque: 89 Nm Thrust of the nozzle: 21 kN MACHINE DETAILS Net weight with control cabinet: 5.9 t Machine dimensions (L x W x H): 4.80 x 1.60 x 1.88 m Connected load: 6.1 kW Dslqsul Uihox Tihsut Fuse rating: 63 A Installed heating capacity: 6.3 kW Number of cylinder heating zones: 4 Drying time / stroke according to Euromap 6: 1.5 s / 340 mm Oil tank capacity: 120 dm³ EQUIPMENT - Five-point double-lever toggle clamping unit mechanism (three-platen unit) with servo-electric drive - Injection unit with servo-electric drive for injection and plasticizing as well as servo-hydraulic drive for moving the entire injection unit - MC6 control system based on an industrial PC with real-time Ethernet technology - Plasticizing system with a screw diameter of 25 mm, nozzle radius 10 mm, nozzle opening 4 mm

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 680221, workpiece weight (max.): 1,000 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 250 mm U-axis travel: ± 30 mm V-axis travel: ± 30 mm Taper pitch/height: ±15° / 110 mm Working area Table dimensions: 820 × 610 mm Max. workpiece size: 980 × 730 × 250 mm Max. workpiece weight: 1,000 kg Tank volume: 250 l Wire EDM system Wire EDM diameter: 0.25 mm Programmable wire tension: 0.3 to 3 daN Automatic wire threading for wire diameters: 0.10 / 0.20 / 0.25 / 0.30 mm Dielectric Delqev Tp Apsx Tihout Paper filter: 2 cartridges Dielectric temperature: ± 1 °C Volume of ion exchange resins: 20 l Max. injection pressure: 4-stage programmable Tank volume: 1,200 l MACHINE DETAILS Dimensions (W × D × H): 1,950 × 2,550 × 2,000 mm Weight without dielectric: 3,250 kg Input voltage: 380 / 400 V Total installed power: 10 kVA Surface roughness: 0.28 µm EQUIPMENT - Linear scales on all axes - Closed wireless diamond guides with zero backlash - Programmable injection pressure with 4 stages - Windows NT-based control with PC keyboard and touchscreen

Condition: good (used), Functionality: fully functional, Year of construction: 2005, operating hours: 22,793 h, load capacity: 6,000 kg, lifting height: 5,900 mm, fuel type: diesel, mast type: standard, construction height: 3,930 mm, fuel: diesel, TECHNICAL DETAILS Load capacity: 6000kg Load center: 600 Delqjtwn Hxox Tihout Lifting height: 5900mm Length: 3300mm Overall width: 1900mm Overall height: 3930mm Dead weight: 10520kg Mast type: Standard Fork length: 1140mm Front tires type: Superelastic Front tires size: 355/65-15 Rear tires type: Superelastic

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, clamping force: 4,200 kN, screw diameter: 60 mm, injection pressure: 2.42 bar, ejector force: 95 N, ejector stroke: 250 mm, plate length: 1,230 mm, plate width: 1,270 mm, TECHNICAL DETAILS Closing force of the mold: 4,200 kN Mold opening force: 250 kN Dimensions of the clamping platen (hxv): 1,270 x 1,230 mm Distance between the standard columns (hxv): 800 x 800 mm Distance of the mold opening: max. 1,020 mm Formwork height: min. 580 mm (380 mm standard + 200 mm extended - ZE45.462) Panel opening stroke: max. 1,600 mm (1,400 mm standard + 200 mm extended - ZE45.462) Ejector stroke: 250 mm Ejection force forwards/backwards: 95 kN / 49 kN Injection unit Screw diameter: 60 mm Ratio Ls/D: 23.3 Injection pressure: 2,420 bar Injection volume: 792 cm³ Injection weight: 720 g Injection speed: 130 mm/s Injection speed: 368 cm³/s Screw speed: 285 rpm Plasticizing capacity: 72.2 g/s at standard screw speed Thrust force of the nozzle: 82 kN Pump motor power: 75 kW Installed heating power: 29 kW Number of cylinder heating zones: 6 (+1 extended nozzle ZE33.00) Drying time / stroke according to Euromap 6: 3.0 s / 560 mm Required oil volume: 1,000 dm³ MACHINE DETAILS Net weight with control cabinet: 21.5 t Machine dimensions (L x W x H): 6.90 x 2.49 x 2.38 m Maximum tool weight: 6,700 kg EQUIPMENT - Fully hydraulic clamping system - MC 5 control system with color monitor, integrated control panel and integrated platen station Duslqx Tisul Ug Hehjt - Plasticizing system SP 2000 - Complete plasticizing system for thermoplastics with 60 mm screw diameter, non-return valve and open nozzle, nozzle radius 15 mm, nozzle opening 6 mm

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 194604, workpiece weight (max.): 800 kg, travel distance X-axis: 628 mm, travel distance Y-axis: 398 mm, travel distance Z-axis: 162 mm, TECHNICAL DETAILS X-axis travel: 628 mm Y-axis travel: 398 mm Z-axis travel: 162 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Cutting speed: max. 711 mm/h Working area Workpiece size (W × D × H): 1,350 × 688 × 361 mm Max. workpiece weight: 800 kg Cone pitch/height: ± 30° / 67 mm Axis measurement: linear glass measuring rod Wire EDM system Wire guides: 0.10 mm and 0.25 mm Permissible coil weights: 4 to 8 kg Dielectric Number of filter cartridges: 16 Units Tank volume: 1,003 l MACHINE DETAILS Weight (with dielectric): 5,200 kg Input voltage: 380/400 V (three-phase alternating current) Power consumption: total: 12 kVA Installation dimensions: approx. 4.3 x 1.3 m EQUIPMENT - Linear scales on all axes - Collision protection on the U, V, and Z axes - Automatic wire threading and rethreading - CAM-CT for path programming - CT-EXPERT for generator optimization - PROFIL-EXPERT for geometry-dependent cutting strategies Duelqov Tpulex Tihet - DIN-compliant wire spool holder

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, clamping force: 6,500 kN, screw diameter: 90 mm, opening stroke: 1,800 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Clearance between the columns (hxv): 1,025 mm x 930 mm Mold height: min. 450 mm Mold height: max. 950 mm Opening width: max. 1,800 mm Screw diameter: 90 mm (barrier) Injection volume: 2,480 cm³ Injection quantity: 2,254 g Rated power of the pump motor: 55 kW Heater output: 62 kW Delqoul Ubwex Tihout Tank capacity: 1,000 l Pneumatic cascades: 4 pieces EQUIPMENT - Engel ERC robot

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 124322, workpiece weight (max.): 500 kg, travel distance X-axis: 318 mm, travel distance Y-axis: 218 mm, travel distance Z-axis: 114 mm, TECHNICAL DETAILS X-axis travel: 318 mm Y-axis travel: 218 mm Z-axis travel: 114 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Control system: PC-based, 14" color monitor, MS-DOS Tap pitch/height: ±30° / 65 mm Working area Type: Tray with swing door Max. workpiece dimensions (W × D × H): 1,130 × 510 × 260 mm Door width: 1,010 mm Max. workpiece weight: 500 kg Table dimensions (W × D): 560 × 440 mm Distance from floor to table: 1,050 mm Volume of the Dielectric capacity: 240 l Dielectric level control: Automatic Wire EDM system Wire diameter: 0.10 – 0.25 mm Wire guide type: Diamond-enclosed guide, zero backlash Dslsv Tpnrsqx Tihout Programmable wire unwinding speed: 0.2 to 15 m/min Programmable wire tension: 0.3 to 3 daN Permissible spool weight and type (according to DIN): 1.6 kg Permissible spool weight and type (according to JIS): 3 kg Used wire recycling: Wire shredding at the rear Automatic threading for wire diameters: 0.050 to 0.300 mm Automatic rethreading for wire diameters: 0.070 to 0.300 mm Minimum threading hole diameter: 0.300 mm for 0.250 mm wire Dielectric Type: Deionized Water Total dielectric volume: 900 l Dielectric temperature: ±0.5 °C Cartridge filters: 16 Deionization resin volume: 30 l Deionization control: Automatic Number of deionization bottles: 3 Injection pressure range: 0 – 20 bar Number of programmable pressure levels: 16 Generator Max. processing speed (material: steel, wire: SW30X): 300 mm²/min Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra Available technologies: Steel, carbide, copper, graphite, aluminum, PCD, copper-tungsten MACHINE DETAILS Machine dimensions (L × W × H): 3,690 × 2,520 × 2,290 mm Weight (without dielectric): 4,400 kg Input voltage: 380/400 V Power consumption: 12 kVA

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 448 mm, travel distance Y-axis: 318 mm, travel distance Z-axis: 158 mm, TECHNICAL DETAILS X-axis travel: 448 mm Y-axis travel: 318 mm Z-axis travel: 158 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Workpiece height: max.: 360 mm Workpiece dimensions (W × D × H): 1,150 × 726 × 360 mm Dujlqsv Tn Udsx Tihjt Workpiece weight: max.: 800 kg Wire EDM system Wire diameter: 0.10 – 0.25 mm Wire guide type: Diamond-enclosed guide, zero backlash Programmable wire unwinding speed: 0.2 to 15 m/min Programmable wire tension: 0.3 to 3 daN Permissible spool weight and type (according to DIN): 1.6 kg Permissible spool weight and type (according to JIS): 3 kg Used wire recovery: Wire shredding at the rear Automatic threading for wire diameters: 0.050 to 0.300 mm Automatic rethreading for wire diameters: 0.070 to 0.300 mm Minimum threading hole diameter: 0.300 mm for 0.250 mm wire Dielectric Type: Deionized water Total dielectric volume: 900 l Dielectric temperature: ±0.5 °C Cartridge filters: 16 Deionization resin filling volume: 30 l Deionization control: Automatic Number of deionization bottles: 3 Injection pressure range: 0 – 20 bar Number of programmable pressure levels: 16 Generator Max. Machining speed (material: steel, wire: SW30X): 300 mm²/min Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra Available technologies: steel, carbide, copper, graphite, aluminum, PCD, copper-tungsten MACHINE DETAILS Input voltage: 380/400 V Total connected load: 12 kVA EQUIPMENT - Linear scales on all axes - Collision protection in U, V, and Z - Wire break detection - Surface-optimized generator for longer tool life - Optimized filter technology for consistent process reliability

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 132019, workpiece weight (max.): 500 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 160 mm, Machine overhauled in 2007 TECHNICAL DETAILS X-axis: 320 mm Y-axis: 220 mm Z-axis: 160 mm U-, V-axis: ± 48 mm Dujlqx Tov Tn A Ueihot Tap pitch/height: ±30° / 66 mm Travel speed: 1 – 900 mm/min Working area Tank dimensions (W × D × H): 1,000 × 490 × 260 mm Load capacity: max. workpiece weight: 500 kg Dielectric volume: 240 l Wire EDM system Wire EDM diameter (single wire): 0.33 – 0.05 mm Wire EDM diameter (double wire): 0.33 – 0.05 mm Automatic wire threading: 0.33 – 0.05 mm Automatic rethreading: 0.33 – 0.07 mm Min. threading hole: 0.3 mm (for 0.25 mm wire) Number of spools: 2 front, 1 rear Front spool weight: 1.6 – 8 kg Rear spool weight: 16 – 25 kg Taper: ± 30° Dielectric Filter type: 3 built-in paper cartridges Total filter area: 66 m² Tank volume: 800 l Numerical control Control type: PC-based CNC Screen: LCD 12.1" TFT touchscreen MACHINE DETAILS Dimensions (W × D × H): 2,320 × 2,310 × 2,320 mm Machine weight (without dielectric): 3,900 kg Connected load: 15 kVA EQUIPMENT - Microcut function for wire diameters of 0.02–0.03 mm - CT robot interface installed at the factory