Second-hand machinery for sale (2,422)

Condition: good (used), Year of construction: 2013, operating hours: 20,791 h, Functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 550 mm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. workpiece dimensions width x depth x height: 750 x 550 x 250 mm Max. workpiece weight: 200 kg (submerged), 450 kg (not submerged) Travel paths Travel paths X/Y/Z axes: 350 / 250 / 256 mm Travel paths U/V axes: ±70 mm Max. taper at height: 30° at 100 mm Positioning speeds Manual positioning speed X/Y/Z/U/V axes: 2 m/min Programmable positioning speed X/Y/Z/U/V axes: 3 m/min Remote control Functions: wire drive, work container, measuring cycles Display resolution: 0.0001 mm Jogger: electronic handwheel for X/Y/U/V/Z axes Dkjbjvuqtfe E H Rvnol Control console Display: TFT 15" XGA (1024 x 768) Input elements: alphanumeric push buttons, keyboard/mouse Wire threading system Threading height: up to 250 mm Threading nozzle diameter: 2 mm Combined wire guide Wire diameter: standard 0.07 - 0.3 mm (option: 0.05 mm) V-Guide: cylindrical to 2° Toroid guide: 2° - 30° Wire drive Wire spool: up to 25 kg Wire tension: 0 - 25 N Wire speed: 0 - 300 m/s Wire guide: semi-automatic Wire disposal: Schopper Work container Access: automatic lowering container Clamping system: clamping support or universal Clamping frame Operating mode: water bath and/or coaxial flushing Height adjustment: 0 - 250 mm automatic Flushing Flushing pressure: 0.2 - 18 bar programmable Flushing combination: coaxial/flushing/extraction Dielectric unit Load volume: 700 l Pre-cleaning: 10 µS/cm Water quality: 4 canisters with 8 filter cartridges Deionization resin: 10 l Water conductivity: 2 µS/cm automatic Cooling system: water/heat exchanger Temperature control: ±1 °C automatic IPG generator Generator: integrated Average working current: 38 A Feed control: servo-controlled/fixed feed Cooling system: air/heat exchanger Max. cutting speed, cylindrical: 300 mm²/min Best roughness Ra: 0.1 µm Average contour deviation Tkm: ± 1 µm (Tf 6 µm) Vision 5 control Control/operator interface: Vision 5 Operating system: Windows XP Operating mode: Multiprocessor Units of measurement: mm/inch Instruction set: absolute/incremental Smallest programmable step: 0.0001 mm Max. instruction length: 15 digits with floating point Max. path correction: 6 mm MACHINE DETAILS Dimensions width x depth x height: 2,095 x 1,950 x 2,247 mm Distance floor - clamping surface: 1,100 mm Net weight: 2,800 kg

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 26489, Year of construction: 2014, operating hours: 20,875 h, load capacity: 1,600 kg, lifting height: 4,500 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,100 mm, Equipment: sideshift, Checked and guaranteed by the seller: Dkob E H Rvovn R D Rsnel - Full functionality according to FEM-4.004 - Serviced & tested (C5 test) battery for electrical devices (min. 75% capacity) - Serviceable tires according to FEM-4.004 (min. 80% tread depth) - Lifting frame, fork carriage, attachments and hydraulic system, hoses checked - Steering axle checked for safety - Forks and lifting chains checked - Driver's seat and seat belt as good as new - New paintwork in original colors and original stickers TECHNICAL DETAILS Drive type: Electric Load capacity: 1,600 kg Lifting height: 4,500 mm Load center: 500 mm Operating hours: 20,875 h Mast type: Triplex Fork length: 1,150 mm Height: 2,100 mm Own weight: approx. 3,000 kg Battery capacity (C5): 75% (protocol is enclosed with delivery) Tires Front: solid rubber, 80% Rear: solid rubber, 80% EQUIPMENT - Side shift - Fork adjuster - Work lights - Charger on request

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 26291, Year of construction: 2018, operating hours: 17,369 h, load capacity: 1,500 kg, lifting height: 5,200 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, Equipment: sideshift, Checked and guaranteed by the seller: - Full functionality according to FEM-4.004 - Serviced & tested (C5 test) battery for electric devices (81% capacity) - Serviceable tires according to FEM-4.004 (min. 70% tread depth) - Lifting frame, fork carriage, attachments and hydraulic system, hoses checked - Steering axle checked for safety - Forks and lifting chains checked - Driver's seat and seat belt as good as new - New paintwork in original colors and original stickers TECHNICAL DETAILS Drive type: Electric Load capacity: 1,500 kg Lifting height: 5,200 mm Load center: 500 mm Operating hours: 17,369 h Mast type: Triplex Fork length: 1,150 mm Dsb Esvn R Ate H Rvnjkl Height: 2,400 mm Own weight: 3,018 kg Battery capacity (C5): 81% (protocol is included with delivery) Front tires: solid rubber Rear tires: solid rubber EQUIPMENT - Side shifter - Charger on request

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 27744, Year of construction: 2019, operating hours: 7,036 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: gas, mast type: triplex, construction height: 2,270 mm, Equipment: sideshift, Checked and guaranteed by the seller: - Full functionality according to FEM-4.004 - Serviceable tires according to FEM-4.004 (min. 70% tread depth) - Lifting frame, fork carriage, attachments and hydraulic system, hoses checked - Steering axle checked for safety - Forks and lifting chains checked - Driver's seat and seat belt as good as new - New paintwork in original colors and original stickers TECHNICAL DETAILS Drive type: Gas (LPG) Load capacity: 2,500 kg Lifting height: 4,700 mm Operating hours: 7,036h Mast type: Triplex Fork length: 1,150 mm Height: 2,270 mm Dksbsvn Rq Ro E H Rvnsl Own weight: 3,965 kg Tires Front: solid rubber Rear: solid rubber

Condition: good (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 0127(009), turning length: 205 mm, spindle speed (max.): 12,000 rpm, turning diameter: 13 mm, drilling capacity: 8 mm, Equipment: documentation/manual, TECHNICAL DETAILS Control system: FANUC 16i-T Number of axes: 9 (X, C1, Y, E, B, A, X, C2) Machining range Max. bar diameter: 13 mm Max. turning length: 205 mm Main spindle Max. speed: 12,000 rpm Spindle power: 2.2 / 3.7 kW C-axis: yes Counter spindle Collet: available Max. speed: 12,000 rpm Spindle power: 2.2 / 3.7 kW C-axis: yes Tool equipment Tool holder: 4-way Cross drilling devices: 3 pieces Drilling capacity: 8 mm Turret: with 8 stations Speed of driven tools: 5,750 rpm Additional tool holders: various available Quills: available MACHINE DETAILS Connected load: 9 kVA Tank capacity: 170 l Coolant: oil Dimensions and weight Dsb E H Rvovuza Aonekl Machine (L x W x H): 2,700 x 1,400 x 1,700 mm Weight of machine: approx. 1,700 kg Loading magazine (L x W x H): 4,300 x 600 x 1,800 mm Weight of loading magazine: approx. 700 kg Peripherals & accessories (L x W x H): 1,200 x 800 x 1,000 mm Weight of peripherals & accessories: approx. 200 kg EQUIPMENT - Manuals  - Machine operating tools - Tool holder - Loading magazine FMB Turbo 2-16 (Ø2 - Ø20 mm, length: 3,200 mm, variant "A") - Parts conveyor belt - Extinguishing system Kraft und Bauer - Manuals and operating tools for the machine

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 0422300345, working width: 1,350 mm, grinding height: 160 mm, working height: 900 mm, conveyor belt speed: 333 mm/s, grinding belt length: 2,620 mm, TECHNICAL DETAILS Operating side: left Working width: 1,350 mm Workpiece thickness: 3-160 mm Belt speed: 4-20 m/min Rollers: 2 steel rollers and 1 rubber roller Rollers and motors 1st motor power: 37 kW, steel contact roller Ø 240 mm, sanding belt 1,370 x 2,620 mm 2nd motor power: 30 kW, steel contact roller Ø 240 mm, sanding belt 1,370 x 2,620 mm 3. motor power: 22 kW, rubber contact roller Ø 240 mm, 70 Shore, sanding belt 1,370 x 2,620 mm Transport motor: 7 kW with inverter Brush motor: 0.75 kW Vacuum fan motor: 7.5 kW Extraction Dust extraction requirement: 13,490 m³/h Display and control Display: 10" touchscreen Program memory: 1,024 Resolution: 640 x 480 pixels MACHINE DETAILS Djb E H Rjukq I Rjvnjkl Length of the machine: 2,970 mm Width of the machine: 2,050 mm Height of the machine: min. 2,255 mm - max. 2,415 mm Working height: 900 mm Amperage: 200 A Voltage: 400 V SCCR: 18 kA, 50 Hz Total connected load: 105 kW Max. Air pressure: 8 bar EQUIPMENT Equipped with 2 steel and 1 rubber roller

Condition: good (used), Year of construction: 2012, Functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, table width: 400 mm, table length: 600 mm, TECHNICAL DETAILS Travel paths of axes X / Y / Z: 400 x 300 x 350 mm Positioning speed of axes X / Y / Z: 6 / 6 / 15 m/min Positioning speed in manual mode of axes X / Y / Z: 2 m/min Acceleration of axis Z: 10.0 m/s² Resolution of axes X / Y / Z: 0.1 µm Laser correction of axes X / Y / Z: linearity / angle / spindle pitch Integrated C-axis Max. electrode weight: 50 kg Rotational speed: 0 -100 g/min Max. mass moment of inertia: 5,000 kg cm² Max. working current: 140 A (in rotation mode) Max. working current: 140 A (static) Positioning accuracy according to ISO 230-2: 0.007° Resolution: 0.0005° Dielectric unit Capacity: 490 l Filter type: 4 cartridges Cooling system: Heat exchanger dielectric / water Temperature control: ±1 °C automatic Generator Generator type: ISPG (Intelligent Speed Power Generator) Pulse current: 80 A Best surface roughness Ra: 0.1 µm IQ module (graphite, copper): integrated Dkjb E H Rjvuqmfsvnjl Control Operating system: Windows XP Data input: 15" LCD screen, mouse or touchscreen, keyboard and remote control User interface: Vision 5 Work area Clamping plate with hole pattern: Hole spacing 50 mm Distance table - chuck: 170 - 520 mm Distance floor - clamping level: 1,000 mm Max. table size: 600 x 400 mm Max. work basin dimensions: 900 x 630 x 350 mm Workpiece and electrode Max. electrode weight: 50 kg Max. workpiece weight: 800 kg Max. workpiece dimensions: 820 x 580 x 250 mm Bath level: 0–290 mm Compressed air Pressure: 6 - 8 bar Average consumption: 100 ± 10 % m³/h Max. consumption: 270 l/min at a pressure of 6 bar while filling the work tank (duration approx. 40 s) Connection: hose coupling Ø 13 mm Cooling water Temperature: room temperature - 7 °C Quantity: approx. 20 l/min Pressure: 1.5–3 bar Cooling and environment Heat exchanger for control cabinet: integrated Heat exchanger for dielectric: integrated Ambient temperature: recommended 20 °C - 25 °C MACHINES DETAILS Machine dimensions: 2,460 x 1,410 x 2,600 mm Dimensions with electrode changer: 2,460 x 2,100 x 2,600 mm Dimensions with pallet changer: 2,460 x 2,630 x 2,600 mm Weight Total weight: 3,830 kg Dielectric weight: 400 kg EQUIPMENT 1 heat exchanger for control cabinet, integrated. 1 heat exchanger for dielectric, integrated.

Condition: excellent (used), Year of construction: 2015, operating hours: 6,609 h, Functionality: fully functional, machine/vehicle number: SL600Q-A0256, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 320 mm, workpiece height (max.): 340 mm, workpiece width (max.): 800 mm, workpiece length (max.): 570 mm, TECHNICAL DETAILS Workpiece dimensions flushing: 800 mm x 570 mm x 340 mm Workpiece dimensions submerged: 800 mm x 570 mm x 280 mm Maximum workpiece weight: 1,000 kg Work table dimensions: 1,050 mm x 850 mm X-axis: 600 mm Y-axis: 400 mm Z-axis: 320 mm UV-axis: 120 mm x 120 mm Maximum cone angle: ±25° (for workpiece thickness 130 mm) Dob E H Rvjvw Ag Aenskl Wire diameter: 0.1 - 0.3 mm Maximum wire speed: 420 mm/s Wire tension: 3 - 23 N Weight of wire spool: 8 kg Processing method: flushing, submerged Table height: 995 mm Dielectric tank External dimensions (W x D): 825 mm x 2,400 mm Weight (empty): 500 kg Tank capacity: 850 l Filtration method: 3 replaceable paper filters Ion exchanger: Ion exchange resin (18 liter type) MACHINE DETAILS Without accessories: 2,635 mm x 2,865 mm x 2,300 mm With accessories: 3,920 mm x 4,215 mm Machine weight: 4,500 kg Transport dimensions: 2,635 x 2,865 x 2,200 mm Operating hours: 67,181 h Cutting time: 6,609 h Air pressure: 0.5 MPa Air flow: 30 NL/min Power consumption: 13 kVA EQUIPMENT - Wire chopper (L-Cut) - Taper Flex 3D Optional extension: Solidworks and DemaCut can be purchased for an additional EUR 5,000.

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: A 0204/6707, workpiece height (max.): 40 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 600 mm, TECHNICAL DETAILS Workpiece length: 120 - 2,500 mm Workpiece width: 50 - 600 mm Workpiece thickness: 12 - 40 mm Control: KOCH Numeric with Windows 2000 Sawing station Sawing station part length: up to 560 mm Saw guide: in measuring rail Measuring stop: tear-free cuts Thickness measurement: bar encoder Separate Z-adjustment: for manual and machine operation Frequency converter: for saw motor Saw blade take-off: available Horizontal drilling station Drilling spindles: 5 spindles per side Dowel tool: 1 x type 3B for dowels 10 x 40 mm Dowel spacing: 7-14 mm Electronic glue monitoring: KOCH ELC Vertical drilling station Empty station: between horizontal and vertical processing Top support: 1 x with 2 guide tracks Vertical drilling support: 1 piece, NC in X + 2 x Y + Z Vertical drilling support: 2 separately adjustable drilling spindles in Y Drilling head: 28 drilling spindles (14 spindles each for X and Y) Suction and clamping shoes: 2 pieces Dsbovcm Uuo E H Rvnokl Horizontal drilling spindles: 2 pieces for longitudinal drilling on the front and rear side Grooving head: 0°/90° swiveling Carrier: with linear guides for center support Workpiece center support: (automatically lowerable) with NC adjustment in X Workpiece support Workpiece stop: for processing strips Workpiece width: max. 140 mm Clamping of strips: via back gauge MACHINE DETAILS Height: 2,300 mm Length: 5,600 mm Width: 6,000 mm Basic equipment - NC width adjustment - 1 support with NC axis in Y on each side - 1 horizontal drilling station with 1 drilling spindle per side - 1 doweling tool with ELC glue monitoring per side - 1 vibratory conveyor with control mirror per side - Central axis with 1:1 glue pump - 2 NC height adjusters (Z-axis) - Belt infeed with NC-adjustable belt pulley - Workpiece transport with toothed belt and spring-loaded cams - Central lubrication - Telephone modem for remote diagnosis

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 34938, cutting length (max.): 4,300 mm, cutting height (max.): 2,200 mm, cutting depth: 80 mm, rotational speed (max.): 4,750 rpm, TECHNICAL DETAILS Swivel adjustment: 0 - 90° (manual) Cutting area: 4300 x 2200 x 80 mm Speed: 4750 rpm Feed: manual Design: automatically deflecting slatted frame Saw carriage lock: manual Deb E H Rvjub Tr Eenskl Saw unit immersion: manual MACHINE DETAILS Motor power : 4,4 kW Space requirement L x H x W: 5400 x 2900 x 1600 mm Type of installation: wall-mounted or free-standing

Condition: excellent (used), Year of construction: 2016, operating hours: 44,682 h, Functionality: fully functional, turning diameter: 20 mm, spindle bore: 24 mm, rotational speed (max.): 10,000 rpm, feed length Z-axis: 210 mm, product length (max.): 80 mm, TECHNICAL DETAILS Control system: FANUC 32i-B Number of axes: 8 Main spindle Max. turning diameter: 20 mm Max. spindle bore diameter: 24 mm Max. speed: 10,000 rpm Max. power: 3.7 kW C-axis: 0.001° Z1 stroke: 210 mm Guide bush unit - synchronously rotating Type of guide bush: 22,001 / T223 Type of collet: 145E / F25 Dkeb E Hevuy N Ao Rvnsl Counter spindle Max. speed: 8,000 rpm Max. power: 3.7 kW Max. gripping diameter: 20 mm Max. part length (forward ejection): 80 mm C-axis: 0.001° Z2 stroke: 210 mm Type of collet: 145E / F25 Tool slide X1, Y1 Tool holder plate: for 6 external turning tools 12 x 12 mm Cross drilling/milling device Number: 5 driven drilling/milling spindles modular Tool sizes: 2 x ER16, 3 x ER11 Power: 1.0 kW (S6000) Front drilling device: for 5 drilling spindles Rear machining with Y2 axis Tool carrier: for 8 tools 4 driven drilling/milling spindles: ER16 modular 4 fixed drilling/milling spindles: ER16 modular Speeds Rapid traverse: 40 m/min (X1, Z1, C1, Y1, Z2, C2, X2, Y2) MACHINE DETAILS Operating hours: 44,682 h Connected load: 15 kVA Bar loading magazine: FMB Turbo 2-20, 2-23 mm/3,200 mm, attachment variant "A" Dimensions and weight Machine (L x W x H): 2,460 x 1,380 x 1,730 mm Weight of machine: approx. 2,900 kg Loading magazine (L x W x H): 4,220 x 620 x 1,800 mm Weight of loading magazine: approx. 600 kg Peripherals & accessories (L x W x H): 1,900 x 700 x 800 mm Weight of peripherals & accessories: approx. 200 kg EQUIPMENT - Alignment shoes with leveling elements - Service tool set - Work area light - 3-color signal lamp - Safety door switch with lock - Maintenance and central lubrication unit with 1.8 l lubricating oil - Pneumatic blow-out device for the Pick-up spindle collet - Color monitor LCD/MDI - Parts conveyor belt with drip tray - Chip conveyor with coolant pump - Small fire extinguishing system Kraft und Bauer with CO₂ extinguishing agent container - Manual and documentation - Automatic shutdown function PowerOff - Program check function: test run possible via handwheel - Continuous thread cutting cycle - Runtime display/part counter - CF card interface - Tool radius compensation - Absolute reference point - Self-diagnosis function - Interface for JBS - Parts conveyor belt with drip tray - 1° indexing on pick-up spindle - Chip conveyor with coolant pump - Coolant oil

Condition: excellent (used), Year of construction: 2016, operating hours: 7,460 h, Functionality: fully functional, machine/vehicle number: 24627, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, workpiece weight (max.): 150 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 55, swivel angle A-axis (min.): 135 °, swivel angle A-axis (max.): 135 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, 5-axis machining center with workpiece storage AUTOMATION Eco-Compact 20 workpiece storage and handling system: 20 workpiece storage spaces / Handling system for automatic loading / Integrated, pneumatic interface for Quick-Point clamping towers Swivel device: Easy swiveling of the system to a fixed point Quick-Point automation clamping tower 96: Height: 80 mm / Plate: Ø 176 mm / Body: Ø 246 mm Quick-Point round plate 96: Without holes / Ø 246 x 27 mm / Bolt spacing: 96 mm Macro-Grip automation clamp 77: Length: 170 mm / Clamping range: 0-160 mm TECHNICAL DETAILS X-axis travel: 450 mm Y-axis travel: 600 mm Z-axis travel: 330 mm Control type: Heidenhain TNC 640 Functions: Dynamic Efficiency (ACC, AFC, trochoidal milling), Dynamic Precision (CTC, AVD), HIMS (Hermle Information and Monitoring Software) Workpiece capacity Maximum jaw width: 470 mm Maximum workpiece diameter: Ø 450 mm Maximum workpiece height: 370 mm Interference circle (A-axis) in 0° position: Ø 610 mm Spindle Speed: 18,000 rpm Tool holder: HSK-A63 Power/torque at 20% duty cycle: 31 kW / 35Nm Tool magazine Interface: SK 40 / HSK A63 Magazine locations: 55 Chip-to-chip time: approx. 4.5 s Maximum tool length: 250 mm Maximum tool diameter with corresponding adjacent location occupancy: Ø 125 mm Maximum tool diameter: Ø 80 mm Maximum tool weight: 8 kg Maximum magazine load: 220 kg Rapid traverse and acceleration Rapid traverse linear (dynamic) X-Y-Z: 30 (50) m/min Acceleration linear (dynamic) X-Y-Z: 8 (15) m/s² Feed force linear X-Y-Z: 4,500 N Table Swivel rotary table: Ø 320 mm Clamping surface: Ø 320 mm Swivel range: +/- 135° Drive type C-axis: Torque Speed of swivel axis A (single-sided drive): 25 rpm Speed of swivel axis A (tandem drive): 55 rpm Speed of rotary axis C: 80 rpm Maximum table load: 150 kg Star-shaped T-slots: 4 pieces / 14 H7 Positioning uncertainty Positioning uncertainty (X-Y-Z axis according to ISO 230-2): ≤ 0.006 mm Chip management Chip chute: Space-saving installation on the left or right Capacity of chip chute: 210 l Chip conveyor: Scraper belt conveyor Deb E H Rsvtmhpjvnokl MACHINE DETAILS Switch-on time: 21,883 h Control switch-on time: 23,157 h Program run: 10,584 h Spindle hours: 7,460 h Power consumption: 46 kVA Net weight: 9000 kg Coolant supply Internal coolant supply: 80 bar Additionally required options: Bed flushing paper belt filter or internal coolant supply 80 bar Internal coolant supply 80 bar includes: - Paper belt filter including police filter - Standard coolant device - Flushing air for scales and bed flushing - Production cabin Safety and additional functions Vario valve: available Blow-off device: blown air through the spindle center Chip flushing gun: available Emulsion mist extraction: including post-filter Manual cabin roof: available Polycarbonate safety window: available Electronic equipment Electrical heat compensation: Heidenhain Electrical manual control module: Heidenhain Measuring probe: Renishaw including preparation BLUM tool breakage/measurement A2: available

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, Suitable for facing, internal and external chamfering - machine in very good condition and with lots of accessories! TECHNICAL DETAILS Workpiece diameter: 25 - 80 mm Workpiece length: 50 - 1,200 mm Workpiece weight (max.): 12 kg Control: Siemens PLC Tool holder: HSK 63C Spindle speed: 350 - 12,000 rpm Working height: 1,000 mm Axial movement of the milling spindle (automatic/manual, max.): 300 mm MACHINE DETAILS Dksbevpgtqj E H Rvnel Total power requirement: 26 kW Machine weight: approx. 6.8 t Space requirement: approx. 7.7 m x 2.9 m x 2.1 m EQUIPMENT - 1 workstation - 2 spindle units. - Feed belt - Discharge belt - Fully automatic process flow

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 0-201-08-7963, TECHNICAL DETAILS Traversing speed in X-direction: Max. 60 m/min. Traversing speed in Y-direction: Max. 60 m/min. Travel speed in Z direction: Max. 30 m/min. Workpiece length X-direction: max. 3440 mm with single loading Workpiece length Y-direction: max. 3710 mm for milling with tool diameter 25 mm Workpiece thickness: max. 300 mm incl. clamping device Z-axis for main spindle travel: 800 mm & second Z-axis for drilling head Vacuum pumps: 4 pcs. Clamping table grid Raster groove exit tables: 2 pcs. Working height of grid table: 850 mm Djbjtt R E Nj E H Rvnskl Grid dimension: 30 mm Groove width: 7 mm Groove depth: 7 mm Distance between vacuum holes: 120 mm EQUIPMENT 5-axis main spindle 15 KW " DRIVE 5+" with vibration sensor Unit interface DRIVE 5+ Disk changer 18-FACH Drilling head 17 spindles horizontal + saw 0/90° Pick-up space for saw blade 350 mm Climbing conveyor Chip and offcut disposal Power Control PC 85 with PLC control Software: Windows XP operating system, WOODWOP-PAKET AV-PC Feeding portal HOMAG Profi TBA370/40/16 Turning and alignment station

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, workpiece length (max.): 6,175 mm, workpiece width (max.): 1,550 mm, workpiece height (max.): 300 mm, spindle speed (max.): 24,000 rpm, Provision: FCA - loading equipment must be provided by the buyer - can be borrowed from Homag TECHNICAL DETAILS Workpiece lengths: max. 6,000 mm (single), max. 2,375 mm (pendulum) Workpiece lengths for workpiece Ø 25 mm: max. 6,175 mm (single), max. 2,550 mm (pendulum) Front workpiece width: max. 1,150 mm (all units) Workpiece width at the front for routing with 25 mm diameter: max. 1,220 mm Front workpiece width for gluing: max. 1,220 mm Workpiece width at the rear: max. 1,400 mm (all units) Workpiece width at the rear for routing with 25 mm diameter: max. 1,550 mm Rear workpiece width for gluing: max. 1,475 mm Rear workpiece width with standard flush trimming and gluing: max. 1,500 mm Workpiece thickness: max. 300 mm including clamping device (router) Workpiece thickness with standard clamp: max. 60 mm Workpiece thickness: min. 12 mm (chamfer milling) Workpiece thickness: min. 16 mm (radius milling or min. 2 x radius + 10 mm) Spindle and tool changer Main spindle: 15 kW, HSK F63 Spindle speed: 24,000 rpm C-axis: with unit interface Plate changer: 18-position, D = 130 mm Tool weight: max. 6 kg Tool weight incl. holder for units: max. 10 kg Dkeb Esu Sz Nys H Rvnel Drilling head Spindles: 30 (V20 / H10 / S360° "MPU") Drill head motor: 2.7 kW, frequency-controlled Speed: max. 7,500 1/min Vertical spindles: 20, high-speed, arranged in a U-shape (3 rows with 11, 3 and 6 spindles) Horizontal spindles: 10, arranged in pairs (4 pairs with 32 mm pitch, 1 pair 320 mm apart) Sawing and routing Grooving and cutting saw: saw blade Ø max. 200 mm Attachment milling spindle for drilling head: 6 kW (for S6 operation) FLEX-5 FLEX-5 sawing, milling and drilling unit: for tool changer C-axis extension for FLEX-5 unit: Coupling element for C-axis Gluing unit POWER EDGE gluing unit: For gluing edge material to straight workpiece edges Edge height: max. 105 mm (gluing unit BAZ222/322) Workpiece thickness during edging: max. 100 mm Further units Flush trimming unit: for tool changer Combined flush trimming and scraper unit: WD 100 mm Combination snipping and corner rounding unit: traced Lock case trimming unit: 2 spindles, D = 16/20 mm EQUIPMENT - with gluing unit - with FLEX-5 unit - Chip conveyor belt: for B200/52-72 - LED position indicator: Console 1,300-1,600 mm - LED position indicator for precise workpiece handling - Extended workpiece processing options thanks to flexible unit system - without tools The technical data and descriptions are taken from a copy of the order confirmation at the time. Data is for information only and is not binding.

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 18,000 rpm, swivel angle B-axis (min.): -60 °, swivel angle B-axis (max.): 120 °, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 400 mm Z-axis: 510 mm Control: HEIDENHAIN iTNC 530 table Table diameter: 400 mm Dkeb Eoukfnlj H Rvnel Number and width of T-slots: 4 x 12 mm, 90° Rotation 4th axis: 360°, through-rotation Inclination 5th axis: +120° to -60° Spindle Distance between spindle nose and table: 120 - 630 mm Spindle speed: max. 18-000 rpm tools Automatic tool changer: 40 tools Tool holder: Big Plus 40 taper Wash gun: yes Portable handwheel: Type HR-410 Work feeds Rapid traverse (X, Y): 36 m/min Rapid traverse (Z): 36 m/min MACHINE DETAILS Base area: 2,820 x 3,800 mm Maximum height: 3,142 mm Net weight (40 tools): 7,000 kg Equipment - Linear scales on each axis - Coolant supply: 20 bar - Chip conveyor - Measuring device for workpiece and tool - Kinematics function

Condition: good (used), Year of construction: 1999, Functionality: fully functional, turning length: 205 mm, rotational speed (max.): 10,000 rpm, bar diameter: 20 mm, number of slots in tool magazine: 18, TECHNICAL DETAILS Control system: Cincom Mitsubishi Meldas Number of axes: 7 (X1, Z1, Y1, C1, X2, Z2, C2) Machining range Max. bar diameter: 20 mm Max. turning length: 205 mm Spindle Main spindle speed: max. 10,000 rpm Main spindle C-axis: 0.001° Counter spindle speed: max. 10,000 rpm Counter spindle C-axis: 0.001° Debsvuyf Re E H Rvnskl Tool capacity Tool holder: for a total of 18 tools (linear tool holder, front attachment, rear machining) MACHINE DETAILS Machine (L x W x H): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Loading magazine (L x W x H): 3,900 x 900 x 1,450 mm Weight of loading magazine: 850 kg EQUIPMENT - Parts conveyor belt - Loading magazine FMB Turbo 3-26

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: P2000Y0745, turning length: 510 mm, turning diameter: 330 mm, spindle speed (max.): 4,000 rpm, swing diameter over bed slide: 330 mm, TECHNICAL DETAILS Control: Fanuc 18i -TB Turning diameter: max. 330 mm Turning length: max. 510 mm Diameter over bed: max. 330 mm Main spindle Spindle power: 11 kW Spindle speed: 4,000 rpm Tool turret Number of turrets: 1 Number of tools: 12 Djbouv D N Te E H Rvnjkl Driven tools: available Driven tools Speed range: 45 - 4,500 rpm Spindle power: 5.5 kW MACHINE DETAILS Machine weight: 4,750 kg Connected load: 38.50 kVA

Year of construction: 2002, Condition: good (used), Functionality: fully functional, 3 Main spindle with 70mm bar passage FUNCTIONS The raw bar is machined in spindle 1 and 2 with a 12-position star turret. At the same time, a 2-station front turret can work on this spindle (for drilling or internal boring). After machining, the drum cycles. The pre-turned part is finished in spindle 3 with a 12-position star turret and tapped. The part is then finished in the counter spindle and unloaded by the unloading gripper (monitoring available). The bar is retracted and the drum cycles. TECHNICAL DETAILS Bar passage: 70 mm counter spindle tool turret: 5 pieces, VDI30 (CNC cross slide) High pressure internal cooling: two turrets Measuring system: direct, high resolution in all X-axes Control system: Siemens 840 D Powerline tool monitoring: Artis Collet chuck: 4x Hainbuch SK65 Number of parallel tools: 5 Main spindle 1: Roughing of the turned part Tool holder: star turret with 12 positions Other: Possibility for additional work by 2-fold frontal turret Main spindle 2: Finishing of the turned part Tool holder: 12-position star turret Other: Possibility for finishing by 2-fold frontal turret Main spindle 3: Finishing, parting and backworking of the turned part Tool holder: star turret with 12 positions EQUIPMENT Dkeb E Hen Uum Hj Rvnel Bar feeder for 1500mm long bars

Condition: good (used), Year of construction: 2007, operating hours: 66,989 h, Functionality: fully functional, machine/vehicle number: 17224, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 30, swivel angle B-axis (min.): -110 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Control: MATSUURA G-Tech 30i FANUC 30i MA, 5-axis simultaneous machining X-axis travel: 550 mm Y-axis travel: 410 mm Z-axis travel: 450 mm B-axis travel: +110° to -110° C-axis travel: 360° Distance table surface - spindle nose: -10 mm to +440 mm Distance B-axis - spindle nose: -40 mm to +410 mm Distance B-axis - table surface: -30 mm Distance table center - X-axis end position (B-axis in zero position): 265 mm Distance table center - Y-axis end position (B-axis in zero position): 180 mm Distance floor - table surface (B-axis in zero position): 945 mm Work surface: Ø170 mm Max. Workpiece size: Ø250 mm x 250 mm height Table load: max. 40 kg Table surface: 4 radial T-slots (90° pitch, 12 mm width) Table indexing B and C axes: 0.001° Table indexing time B-axis 90°: 1.2 s Table indexing time C-axis 90°: 0.9 s Holding torque B-axis: 1,112 Nm Holding torque C-axis: 500 Nm Torque B-axis: 1,070 Nm Torque C-axis: 192 Nm Spindle speed range: 50 - 15,000 rpm Spindle mount: BT 40 JIS B 6339 Big+ Pull stud: BT 40 JIS B 6339 40P Dsb E H Rveuruatonjkl Inner diameter of spindle bearing: 70 mm Spindle motor power: 7.5/5.5 kW Max. Spindle torque: 65.1 Nm up to 1,100 rpm Rapid traverse X-, Y-, Z-axis: 50,000 mm/min Rapid traverse B-axis: 30 rpm Rapid traverse C-axis: 50 rpm Feed X-, Y-, Z-axis: 1 - 50,000 mm/min Min. feed increment X-, Y-, Z-axis: 0.001 mm Min. feed increment B-, C-axis: 0.001° Number of tools in the magazine: 40 Max. Tool weight: 10 kg Max. Tool diameter (full load): Ø96 mm Max. Tool diameter (free neighboring stations): Ø150 mm Max. Tool length: 300 mm Tool change time (5 kg): 1.1 s Chip-to-chip time (5 kg): 4.1 s MACHINE DETAILS Machine height: 2,705 mm Machine width: 2,281 mm Machine depth: 3,665 mm Machine weight: 8,600 kg Total connected load: 32 kVA Supply voltage: 3 x 400 V, 50 Hz Compressed air connection: 5.5 - 9.5 bar Compressed air consumption: max. 1,000 l/min (at 20,000 rpm) EQUIPMENT - Tool changer with 30 stations (chain) - Complete full casing - Spindle (50 - 15,000 rpm), grease lubricated - Spindle blow-out - Electric spindle orientation - Spindle oil cooler and spindle overload protection - Air nozzle on headstock, switchable via M function - 2 spiral chip conveyors - Coolant tank with standard coolant pump - Rotary encoder for B and C axes - Work area light - Control panel with 10.4" color screen - Power on/off timer - Ethernet interface for program data transfer - Machine design in accordance with European safety requirements

Condition: ready for operation (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: 557, grinding length: 1,200 mm, grinding width: 450 mm, grinding height: 450 mm, grinding wheel diameter: 400 mm, No reserve price - guaranteed sale at the highest bid! Deb Eevr Tm Ne H Rvnskl TECHNICAL DETAILS Grinding area: approx. 450 x 1,200 mm Magnetic plate dimensions: approx. 420 x 1,200 mm Grinding height: 450 mm Component height: 370 mm Grinding wheel Diameter: up to max. 400 mm Bore: 127 mm Width: max. 100 mm Drive Spindle power: 17 kW (according to type plate) Additional: incl. cooling water system A 10-ton hall crane can be used for loading.

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 12,000 rpm, swivel angle B-axis (min.): -60 °, swivel angle B-axis (max.): 120 °, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 400 mm Z-axis: 510 mm Control: HEIDENHAIN iTNC 530 table Table diameter: 400 mm Number and width of T-slots: 4 x 12 mm, 90° Rotation 4th axis: 360°, through-rotating Inclination 5th axis: +120° to -60° Spindle Distance between spindle nose and table: 120 - 630 mm Spindle speed: max. 12,000 rpm tools Automatic tool changer: 40 tools Tool holder: Big Plus 40 taper Wash gun: yes Portable handwheel: Type HR-410 Work feeds Rapid traverse (X, Y): 36 m/min Rapid traverse (Z): 36 m/min MACHINE DETAILS Base area: 2,820 x 3,800 mm Maximum height: 3,142 mm Net weight (40 tools): 7,000 kg Equipment - Linear scales on each axis - Coolant supply: 20 bar - Chip conveyor - Measuring device for workpiece and tool Dkjboukfm Us E H Rvnsl - Kinematics function

Condition: like new (used), Year of construction: 2009, Functionality: fully functional, turning diameter over cross slide: 258 mm, turning diameter over bed slide: 460 mm, center height: 225 mm, spindle speed (max.): 3,000 rpm, distance between centers: 930 mm, TECHNICAL DETAILS Control system: Siemens 810D with Shop Turn Turning diameter over bed: 460 mm Turning diameter over cross slide: 258 mm Center height: 225 mm Distance between the centers: 930 mm Bed width: 300 mm Spindle motor: 9 kW Spindle speed level I: 140 - 400 rpm Spindle speed level II: 36 - 1,000 rpm Spindle speed level III: 1,000 - 3,000 rpm X-axis motor: 0.82 kW Z-axis motor: 1.48 kW Spindle nose: D1 - 6 Spindle bore: 58 mm Quill diameter: 68 mm Quill travel: 127 mm Quill holder: MT4 X-axis travel: 340 mm Z-axis travel: 930 mm Rapid traverse X-axis: 5,000 mm/min Rapid traverse Z-axis: 5,000 mm/min Dkeb E H Rvourlydenjl MACHINE DETAILS Dimensions L x W x H: 2,500 mm x 1,350 mm x 1,800 mm Weight: 1,850 kg EQUIPMENT - CE modification

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, travel distance X-axis: 680 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 625 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 240, swivel angle B-axis (min.): -110 °, swivel angle B-axis (max.): 65 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Control system: Fanuc 16iMB X-axis travel: 680 mm Y-axis travel: 400 mm Z-axis travel: 625 mm B-axis travel: +65º to -110º C-axis travel: 360º Distance pallet spindle nose: -86 mm to 540 mm (for B-axis 0º) Pallet center-spindle nose distance: 60 mm to 685 mm (for B-axis -90º) Pallet center-to-column guide distance: -25 mm to 375 mm Spindle center-to-column guide distance: 227 mm Distance between floor and pallet surface: 1,165 mm Work surface diameter: 130 mm Pallet load: max. 60 kg Pallet changer: 40 pallets Workpiece dimensions: max. Ø360 mm x 250 mm height Spindle speed: 40 - 15,000 rpm Spindle taper: 7/24 steep taper #40, Big PLUS Deb E Hourlwvj Rvnokl Spindle diameter: 80 mm Spindle torque: max. 135 Nm at 850 rpm (15/7.5 kW) Number of tools: 240 Tool diameter: max. 80 mm, with free neighboring stations max. 150 mm Tool length: max. 260 mm Tool weight: max. 8 kg Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min B-axis speed: 10 rpm C-axis speed: 13.5 rpm Feed speed X/Y/Z: 1 - 15 m/min Feed speed B-axis: 1 - 2,160º/min C-axis feed speed: 1 - 3,600º/min MACHINE DETAILS Machine height: 3,210 mm Machine weight: 11,700 kg Footprint: approx. 4,945 mm x 3,655 mm EQUIPMENT - Rotary encoder for B and C axes, direct path measuring system (Heidenhain) for X, Y and Z axes - Internal cooling: 30 l/min, 20 bar - Scraper belt chip conveyor - Power on / power off timer - Measuring probe RENISHAW MP 10 Easy Probe - Renishaw NC 1 laser - 2 MB memory - 8 additional M-functions - Number of tool corrections: 999 - Increase of workpiece coordinate systems from 6 to 54 - Coordinate system rotation G68/G69 - Automatic zero point tracking - Program restart

Condition: good (used), Year of construction: 2008, operating hours: 25,662 h, Functionality: fully functional, machine/vehicle number: 17951, TECHNICAL DETAILS Control: MATSUURA G-Tech 30i (FANUC 30i MA) for 3-axis simultaneous machining X-axis travel: 660 mm Y-axis travel: 660 mm Z-axis travel: 660 mm Speed range: 40 - 12,000 rpm B-axis: 360° Indexing increment: 0.001° Distance table surface - spindle nose: 80 to 680 mm Distance pallet surface - spindle center: 80 - 680 mm Distance pallet table center - spindle head: 120 - 720 mm Pallet size: 500 x 500 mm max. table load: 400 kg Max. workpiece size: Ø 650 mm x 750 mm Table surface: 40 holes â M16 x 2 mm pitch Pallet change time: 7.5 s Pallet change time (pallet to pallet): 15 s Number of pallets: 2 Dksb E H Rotwcvzjvnol Number of magazine positions: 120 Tool diameter: with full occupancy Ø90 mm Tool diameter: with free neighboring stations Ø150 mm Tool length: 350 mm Tool change time (tool weight < 5 kg): 1.3 s Tool change time (tool weight > 5 kg): 2 s Chip-to-chip time (tool weight < 5 kg): 2.9 s Spindle holder with face contact: BT 40 JIS B 6339 Big+ Pull stud: BT 40 JIS B 6339 40P Inner diameter of the spindle bearing: 80 mm Spindle motor power (30%/100% ED): 22 / 15 kW Max. Torque (FANUC motor): 187 Nm up to 1,120 rpm Rapid traverse X-, Y- and Z-axis: 50 m/min Feed X-, Y- and Z-axis: 1 - 50,000 mm/min Stepless manual feed: 0 - 4,000 mm/min Positioning accuracy over the entire X-, Y- and Z-axis travel: ± 0.006 mm Repeat accuracy X-, Y- and Z-axis: ± 0.001 mm Changeover accuracy of different pallets in Y-axis: 0.01 mm Repeat accuracy of pallet clamping in X, Y and Z direction: 0.003 mm Indexing accuracy: 5" Repeatability of indexing: ± 2" Torque on table with FANUC drive: 380 Nm MACHINE DETAILS Dimensions: 3,340 x 6,740 x 2,533 mm Machine weight: 7,500 kg Total connected load: 51 kVA Supply voltage: 3 x 400V, 50 Hz Compressed air connection: 5.5 - 9.5 bar Compressed air consumption: max. 400 l/min Axle guides: Roller guides Lubrication: permanent grease lubrication X-, Y- and Z-axis power: 5.5/5.5/4.5 kW Axial force X-, Y- and Z-axis: FANUC motor 9.1/5.0/6.0 kN Acceleration/deceleration: 0.7 G EQUIPMENT - Preparation for magazine with 240 slots - Optical measuring system - Renishaw NC4 - RENISHAW OMP 60 measuring probe (EASY PROBE SOFTWARE included) - Measuring probe - Chip conveyor - Knoll high-pressure system - Extraction unit