Second-hand machinery for sale (2,359)

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, The granulating machine is efficient and separates copper from plastic casings. Condition: Well maintained, fully serviced, ready for use No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Output of copper granulate: front Output of plastic granulate: rear Area of application: precise recycling of copper cables Capacity: 600 - 800 kg/h (with standard feed) Knives: 25 rotating, 2 fixed MACHINE DETAILS Dimensions (L x W x H): 200 x 400 x 305 mm Duebsvr A Upj Euf D Djt Engine power: 45 kW (60 HP) Weight: 5,500 kg EQUIPMENT - newly sharpened knives - new wire mesh filter

Condition: ready for operation (used), Year of construction: 2000, operating hours: 48,743 h, Functionality: fully functional, machine/vehicle number: 28830006172, The machine is equipped with a chain magazine, pallet turntable and loading station. MAINTENANCE - Motor and pump for the hydraulic system replaced - Replaced the hoses - LI module replaced in the control cabinet - Drum on the Knoll system replaced TECHNICAL DETAILS X-travel: 600 mm Y-travel: 560 mm Z-travel: 560 mm B-axis: 360° Control: SINUMERIK 840D powerline Infinitely variable speed: 0 - 8000 rpm Tool magazine: Chain magazine Number of tool positions: 90 / max. 450 kg Circular pallet storage: "compact" Rotation speed PSA axis: 3 rpm Positioning time 1 x 90°: 3 s Pallet change time: 6 s Number of storage locations: 4 Pallet size: 400 x 500 mm Loading height: 1100 mm Load with 1/2 loaded pallets: max. 350/600 kg/pallet Maximum workpiece weight with one-sided load: 350 kg Workpiece height: 770 mm Torque 100 % / 40 % ED: max. 124 / 191 Nm Motor power 100 % / 40 % ED: max. 13 / 20 kW Feed rate: 60,000 mm/min Rapid traverse: 60 m/min Set-up mode: 2,000 mm/min Feed force X,Z / Y: 9600 / 8000 N Position measuring system Resolution: 0.001 mm (position tolerance according to VDU DGQ 3441) MACHINE DETAILS Machine dimensions L x W x H: 4.5 x 2.4 x 2.4 m Installation area: 7 x 5 m Transport weight incl. cladding: 3,400 kg Transport dimensions DMC 60 H L x W x H: 2.9 x 2.0 x 2.4 m Dusb Eufotrdrne D Det Connected load DMC 60: 80 kVA EQUIPMENT - Chip conveyor - Technical documents and installation plan available

Condition: ready for operation (used), Year of construction: 2004, operating hours: 78,407 h, Functionality: fully functional, machine/vehicle number: 80.4409.0001, travel distance X-axis: 730 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 730 mm, controller model: Fanuc CNC Professional 3, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 730 mm Y-axis travel: 650 mm Z-axis travel: 730 mm Rapid traverse (X, Y, Z): 60 m/min B-axis indexing: 360° (1° step) Max. spindle speed: 20 - 12,000 rpm Distance spindle nose - table surface: 70 - 800 mm Control: Fanuc CNC Professional 3 Work table & workpiece capacity Number of pallets: 2 Pallet dimensions: 500 x 500 mm Max. workpiece weight: 700 kg Tool system Tool holder: HSK-A63 Dueb Esv E Rq Eouf D Djt Number of tools in the magazine: 60 Max. tool diameter: 70 mm Max. tool length: 360 mm Max. tool weight: 12 kg MACHINES DETAILS Length: 4,800 mm Width: 2,800 mm Height: 3,000 mm Weight: 9,900 kg On time: 78,407 h Spindle hours: 26,825 h EQUIPMENT - Floor grid

Condition: repair required (used), Year of construction: 2022, operating hours: 187 h, Functionality: limited functionality, working width: 1,180 mm, area performance: 5,100 m²/h, battery capacity: 240 Ah, rotational speed (min.): 1,800 rpm, rotational speed (max.): 1,300 rpm, Error message K1/654, H1/009 is displayed - otherwise good condition Dob Euf Dovur E Ae Deut No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Brush working width: 850 mm Suction working width: 1,180 mm Theoretical surface performance: 5,100 m²/h Brush speed: 180–1,300 rpm Tank capacity Fresh water/dirty water tank: 150/150 l Electrical specifications Battery voltage: 36 V Battery capacity: 240 Ah Battery runtime: max. 5 h Power consumption: up to 2,600 W MACHINE DETAILS Sound pressure level: 67 dB(A) Weight: 609 kg Dimensions (L x W x H): 1,790 x 1,070 x 1,420 mm Operating hours of suction bar: 20 h Operating hours of brush head: 52 h Operating hours of suction lip: 16 h

Condition: excellent (used), Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 20559 - 09242, pressure: 700 bar, TECHNICAL DETAILS Max. pressure range: up to 700 bar Dosing volume: 4 x 2,000 cm³ Cylinder types: single-acting Number of cylinders: 4 Tank volume: 20.0 l Motor: electric motor, 230 V, 50 Hz, IP55 Duob Euevur A Isf D Dot Power: 2.2 kW MACHINE DETAILS Dimensions (W x D x H): 102 x 84 x 96 cm Weight: 650 kg

Condition: good (used), Year of construction: 2020, Functionality: fully functional, machine/vehicle number: 00216, HIGHLIGHTS Dob Eufjvurzqe D Dout - Measuring device for inspecting cutting edge preparation - Compact design - Low weight and high rigidity thanks to carbon - High level of work safety - Results in a workshop environment TECHNICAL DETAILS Max. Z-axis: 300 mm Lateral resolution: 1.2 µm Height resolution: 0.1 µm Measuring volume: 1.6 x 1.2 x 1.0 mm³ Measuring points: 1.3 million Data acquisition: 2 s Smallest measurable working distance: 30 mm Measuring cutting edge rounding: 2D/3D evaluation Maintenance: Full-service maintenance is carried out until 06/24. EQUIPMENT - Zoller pomSKpGO pilot 3.0 - Software pomSKpGo 3.0/4.0, current program version 1.17.0.21166 - Universal holder pomPrisma swiveling (holder for drills, milling cutters) - Indexable insert holder pomSKpGonio 2A - Calibration gauge pom R13µm including wooden box - pomSKpGo transport case with wheels and pull handle

Condition: good (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 120K587, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain, workpiece weight (max.): 1,000 kg, spindle speed (max.): 10,300 rpm, Equipment: chip conveyor, documentation/manual, Machine comes from the test laboratory of a marine gearbox manufacturer and has not been a production machine, therefore it has few operating hours. An exact reading is not possible as the machine is not under power TECHNICAL DETAILS Control: Heidenhain TNC426M/410M Travel X / Y / Z: 1020 / 600 / 560 mm Spindle speed: max. 10,300 rpm Spindle torque: max. 252 Nm Deb Est Tdylouf D Dout Milling table size: 635 x 1,200 mm Workpiece weight: max. 1,000 kg T-slots: 6 x 18 mm H8 Feed rate per axis: 32 m/min Tool holder: BT40 Tool magazine size: 24 slots Tool diameter / length: 88 - 125 / 300 mm Tool change time: 2.5 s Chip-to-chip time: 6 s MACHINE DETAILS Height: 2,825 mm Width: 2,650 mm Length: 2,200 mm Weight: 7,500 kg Drive power: 39 kW Lubricant tank volume: 4L Coolant tank volume: 400L EQUIPMENT - Fully encapsulated work area with roof - Chip conveyor - Central oil lubrication - 3D probe - Handwheel

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, TECHNICAL DETAILS Measuring field X x Y: 500 x 380 mm Camera: 2x 2MP GigE CCD cameras Resolution: 1624 x 1236 pixels Software: ATOS measurement software + GOM Inspect V8 evaluation software Rotation table (motorized) Diameter: 640 mm Load: max. 150 kg Control unit Screen diagonal: 19" Manual control: via joystick Automatic control: via ATOS software Column stand Height: 1.8 m Boom: 0.9 m Details: swivel/swivel head, adapter available Dusbjttky Ae Euf D Det MACHINE DETAILS Dimensions: approx. 340 x 130 x 230 mm Weight: approx. 3.9 kg EQUIPMENT - LED lighting - Laser pointer for distance adjustment - Integrated control unit - 10m cable - Lenses for the above measuring field - Calibration object for the above measuring field with calibration certificate - Transport case - Notebook with docking station: 64-bit Intel Core i5 processor, 2.66 GHz (DualCore) 8 GByte main memory NVIDIA Quadro OpenGL graphics card 15.4" display:1920 x 1050 pixels 500 GB hard disk DVD+/-RW / CD-RW burner Cardbus-Firewire card Gigabit Ethernet network Operating system: Windows (64 bit)

Condition: good (used), Year of construction: 2005, Functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 60 rpm, TECHNICAL DETAILS Travel X/Y/Z axes: 500 x 350 x 500 mm Max. workpiece dimensions (width x depth x height): 880 x 680 x 350 mm Max. workpiece weight: 800 kg Workpiece area Work tank type: Automatic lowering tank Internal tank dimensions: 1,090 x 730 x 490 mm Bath height: 0 - 390 mm Machine table Clamping surface: Grid plate with 50 mm hole grid Programmed brake position: yes Dimensions: 800 x 600 Integrated C-axis Indexing and rotation: Interpolation with X, Y and Z as well as spiral machining Speed: 60 rpm Max. working current: 72 A Electrode changer Automatic: integrated Electrode weight: 100 kg Generator Type: AGIE IPG "Intelligent Power Generation" Best surface roughness Ra: 0.1 µm Dielectric unit Loading volume: 620 l Filter quality: 4 cartridges with 8 filter elements Cooling system: water/air heat exchanger Temperature control: ± 1 °C automatic MACHINE DETAILS System dimensions: 2,855 x 2,135 x 2,965 mm Distance floor - clamping height: 884 mm Net weight: approx. 3,900 kg Gross weight: approx. 5,500 kg Cooling System: water/air cooler for generator, control and dielectric Duob Ejvuqxbouf D Det Norms and guidelines Standards: Directive 89/336/CEE Electromagnetic compatibility

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 5820387, punching force: 30 t, sheet thickness steel (max.): 8 mm, working range: 3,000 mm, travel distance X-axis: 2,500 mm, CNC punching machine with fully automatic loading system TECHNICAL DETAILS Control: CNC AMADAN 04 P-C Automation & Safety Loading system: LKI L III 250 automatic loader Unloading system: PR III automatic unloader Sorting: Automatic part sorting on pallets possible Noise protection: Noise protection hood Safety equipment: SICK photoelectric sensors, original safety fences Processing capacity Punching force: 30 t Max. material thickness (steel): 8 mm Working area: 3,000 mm X-axis travel: 2,500 mm Table system Deb Ejwc S R Hjuf D Djut Table type: Brush table for quiet operation and scratch-free processing Repositioning: Automatic sheet repositioning Tool lubrication: Air Blow automatic lubrication Punching Pneumatic punches: 2 pieces MACHINE DETAILS Power supply: Three-phase Overall length: 15,000 mm Total width: 5,000 mm Total height: 2,000 mm Punching machine weight: 16 t Loader weight: 2.3 t EQUIPMENT - Automatic loader LKI L III 250, built in 2011 - Automatic unloader PR III - Noise protection hood - SICK photoelectric sensors - Original safety fences - Brush table - Automatic sheet repositioning - Air blow lubrication - Two pneumatic punches Further technical details according to the manufacturer - without guarantee Ram stroke: 31.9 mm Max. hole diameter: 114.3 mm Punching frequency (X/Y direction) Stroke length: 8.0 mm – Pitch: 25.4 mm – Stroke frequency: 300 / 375 strokes/min Stroke length: 4.5 mm – Pitch: 25.4 mm – Stroke rate: 375 / 375 strokes/min Stroke length: 4.5 mm – Pitch: 2.0 mm – Stroke rate: 600 / 600 strokes/min Tool turret Tool type: Amada Thick Turret Turret speed: 25 rpm Turret capacity: 58 stations (4 of which are auto-indexable) Accuracies Punching accuracy: ± 0.10 mm Positioning accuracy: ± 0.025 mm Repeat accuracy: ± 0.025 mm

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 0422300345, working width: 1,350 mm, grinding height: 160 mm, working height: 900 mm, conveyor belt speed: 333 mm/s, grinding belt length: 2,620 mm, TECHNICAL DETAILS Operating side: left Dueb Eoukq I Rouf D Dot Working width: 1,350 mm Workpiece thickness: 3-160 mm Belt speed: 4-20 m/min Rollers: 2 steel rollers and 1 rubber roller Rollers and motors 1st motor power: 37 kW, steel contact roller Ø 240 mm, sanding belt 1,370 x 2,620 mm 2nd motor power: 30 kW, steel contact roller Ø 240 mm, sanding belt 1,370 x 2,620 mm 3. motor power: 22 kW, rubber contact roller Ø 240 mm, 70 Shore, sanding belt 1,370 x 2,620 mm Transport motor: 7 kW with inverter Brush motor: 0.75 kW Vacuum fan motor: 7.5 kW Extraction Dust extraction requirement: 13,490 m³/h Display and control Display: 10" touchscreen Program memory: 1,024 Resolution: 640 x 480 pixels MACHINE DETAILS Length of the machine: 2,970 mm Width of the machine: 2,050 mm Height of the machine: min. 2,255 mm - max. 2,415 mm Working height: 900 mm Amperage: 200 A Voltage: 400 V SCCR: 18 kA, 50 Hz Total connected load: 105 kW Max. Air pressure: 8 bar EQUIPMENT Equipped with 2 steel and 1 rubber roller

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 26489, Year of construction: 2014, operating hours: 20,875 h, load capacity: 1,600 kg, lifting height: 4,500 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,100 mm, Equipment: sideshift, Checked and guaranteed by the seller: - Full functionality according to FEM-4.004 - Serviced & tested (C5 test) battery for electrical devices (min. 75% capacity) - Serviceable tires according to FEM-4.004 (min. 80% tread depth) - Lifting frame, fork carriage, attachments and hydraulic system, hoses checked - Steering axle checked for safety - Forks and lifting chains checked - Driver's seat and seat belt as good as new - New paintwork in original colors and original stickers TECHNICAL DETAILS Drive type: Electric Load capacity: 1,600 kg Lifting height: 4,500 mm Load center: 500 mm Operating hours: 20,875 h Mast type: Triplex Fork length: 1,150 mm Height: 2,100 mm Own weight: approx. 3,000 kg Battery capacity (C5): 75% (protocol is enclosed with delivery) Tires Duob Eovn R D Rjuf D Dot Front: solid rubber, 80% Rear: solid rubber, 80% EQUIPMENT - Side shift - Fork adjuster - Work lights - Charger on request

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 26291, Year of construction: 2018, operating hours: 17,369 h, load capacity: 1,500 kg, lifting height: 5,200 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, Equipment: sideshift, Checked and guaranteed by the seller: - Full functionality according to FEM-4.004 - Serviced & tested (C5 test) battery for electric devices (81% capacity) - Serviceable tires according to FEM-4.004 (min. 70% tread depth) - Lifting frame, fork carriage, attachments and hydraulic system, hoses checked - Steering axle checked for safety - Forks and lifting chains checked - Driver's seat and seat belt as good as new - New paintwork in original colors and original stickers TECHNICAL DETAILS Drive type: Electric Load capacity: 1,500 kg Lifting height: 5,200 mm Load center: 500 mm Operating hours: 17,369 h Mast type: Triplex Fork length: 1,150 mm Height: 2,400 mm Own weight: 3,018 kg Battery capacity (C5): 81% (protocol is included with delivery) Front tires: solid rubber Rear tires: solid rubber EQUIPMENT Duob Eufsvn R Ats D Djt - Side shifter - Charger on request

Condition: like new (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 530008, Coordinate measuring machine with probe change system Optional external programming station can be purchased additionally TECHNICAL DETAILS Measuring range X / Y / Z: 700 / 1000 / 600 mm Probe head: VAST XT gold #001RHOPF Measuring software: CALYPSO 5.6 including curve option Control: C99 with control panel BP26_SE EQUIPMENT - 7-fold probe changing system - Push-button plate - Probe accessories - Calibration sphere: #G00559-b r=14.9999 HP - Workstation with monitor - Documentation Further accessories - OPTIONAL: with external programming station CALYPSO 5.6 Duob Euf Dettkgmj Djt Last calibration 08/2023

Condition: good (used), Year of construction: 2013, operating hours: 20,791 h, Functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 550 mm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. workpiece dimensions width x depth x height: 750 x 550 x 250 mm Max. workpiece weight: 200 kg (submerged), 450 kg (not submerged) Travel paths Travel paths X/Y/Z axes: 350 / 250 / 256 mm Travel paths U/V axes: ±70 mm Max. taper at height: 30° at 100 mm Positioning speeds Manual positioning speed X/Y/Z/U/V axes: 2 m/min Programmable positioning speed X/Y/Z/U/V axes: 3 m/min Remote control Functions: wire drive, work container, measuring cycles Display resolution: 0.0001 mm Jogger: electronic handwheel for X/Y/U/V/Z axes Control console Display: TFT 15" XGA (1024 x 768) Input elements: alphanumeric push buttons, keyboard/mouse Wire threading system Threading height: up to 250 mm Dujb Euovuqtfef D Dst Threading nozzle diameter: 2 mm Combined wire guide Wire diameter: standard 0.07 - 0.3 mm (option: 0.05 mm) V-Guide: cylindrical to 2° Toroid guide: 2° - 30° Wire drive Wire spool: up to 25 kg Wire tension: 0 - 25 N Wire speed: 0 - 300 m/s Wire guide: semi-automatic Wire disposal: Schopper Work container Access: automatic lowering container Clamping system: clamping support or universal Clamping frame Operating mode: water bath and/or coaxial flushing Height adjustment: 0 - 250 mm automatic Flushing Flushing pressure: 0.2 - 18 bar programmable Flushing combination: coaxial/flushing/extraction Dielectric unit Load volume: 700 l Pre-cleaning: 10 µS/cm Water quality: 4 canisters with 8 filter cartridges Deionization resin: 10 l Water conductivity: 2 µS/cm automatic Cooling system: water/heat exchanger Temperature control: ±1 °C automatic IPG generator Generator: integrated Average working current: 38 A Feed control: servo-controlled/fixed feed Cooling system: air/heat exchanger Max. cutting speed, cylindrical: 300 mm²/min Best roughness Ra: 0.1 µm Average contour deviation Tkm: ± 1 µm (Tf 6 µm) Vision 5 control Control/operator interface: Vision 5 Operating system: Windows XP Operating mode: Multiprocessor Units of measurement: mm/inch Instruction set: absolute/incremental Smallest programmable step: 0.0001 mm Max. instruction length: 15 digits with floating point Max. path correction: 6 mm MACHINE DETAILS Dimensions width x depth x height: 2,095 x 1,950 x 2,247 mm Distance floor - clamping surface: 1,100 mm Net weight: 2,800 kg

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 27744, Year of construction: 2019, operating hours: 7,036 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: gas, mast type: triplex, construction height: 2,270 mm, Equipment: sideshift, Checked and guaranteed by the seller: - Full functionality according to FEM-4.004 - Serviceable tires according to FEM-4.004 (min. 70% tread depth) - Lifting frame, fork carriage, attachments and hydraulic system, hoses checked - Steering axle checked for safety - Forks and lifting chains checked - Driver's seat and seat belt as good as new - New paintwork in original colors and original stickers TECHNICAL DETAILS Drive type: Gas (LPG) Load capacity: 2,500 kg Lifting height: 4,700 mm Deb Eufovn Rq Rj D Djut Operating hours: 7,036h Mast type: Triplex Fork length: 1,150 mm Height: 2,270 mm Own weight: 3,965 kg Tires Front: solid rubber Rear: solid rubber

Condition: good (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 0127(009), turning length: 205 mm, spindle speed (max.): 12,000 rpm, turning diameter: 13 mm, drilling capacity: 8 mm, Equipment: documentation/manual, TECHNICAL DETAILS Control system: FANUC 16i-T Number of axes: 9 (X, C1, Y, E, B, A, X, C2) Machining range Max. bar diameter: 13 mm Max. turning length: 205 mm Main spindle Max. speed: 12,000 rpm Spindle power: 2.2 / 3.7 kW C-axis: yes Counter spindle Collet: available Max. speed: 12,000 rpm Spindle power: 2.2 / 3.7 kW C-axis: yes Tool equipment Tool holder: 4-way Cross drilling devices: 3 pieces Drilling capacity: 8 mm Turret: with 8 stations Speed of driven tools: 5,750 rpm Additional tool holders: various available Quills: available MACHINE DETAILS Connected load: 9 kVA Tank capacity: 170 l Coolant: oil Dimensions and weight Machine (L x W x H): 2,700 x 1,400 x 1,700 mm Weight of machine: approx. 1,700 kg Loading magazine (L x W x H): 4,300 x 600 x 1,800 mm Weight of loading magazine: approx. 700 kg Peripherals & accessories (L x W x H): 1,200 x 800 x 1,000 mm Weight of peripherals & accessories: approx. 200 kg EQUIPMENT Dusb Euf Dsvuza Ae Dst - Manuals  - Machine operating tools - Tool holder - Loading magazine FMB Turbo 2-16 (Ø2 - Ø20 mm, length: 3,200 mm, variant "A") - Parts conveyor belt - Extinguishing system Kraft und Bauer - Manuals and operating tools for the machine

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: A 0204/6707, workpiece height (max.): 40 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 600 mm, TECHNICAL DETAILS Workpiece length: 120 - 2,500 mm Workpiece width: 50 - 600 mm Workpiece thickness: 12 - 40 mm Control: KOCH Numeric with Windows 2000 Sawing station Sawing station part length: up to 560 mm Saw guide: in measuring rail Measuring stop: tear-free cuts Thickness measurement: bar encoder Separate Z-adjustment: for manual and machine operation Frequency converter: for saw motor Saw blade take-off: available Horizontal drilling station Drilling spindles: 5 spindles per side Dowel tool: 1 x type 3B for dowels 10 x 40 mm Dusb Euf Dovcm Uuj Djt Dowel spacing: 7-14 mm Electronic glue monitoring: KOCH ELC Vertical drilling station Empty station: between horizontal and vertical processing Top support: 1 x with 2 guide tracks Vertical drilling support: 1 piece, NC in X + 2 x Y + Z Vertical drilling support: 2 separately adjustable drilling spindles in Y Drilling head: 28 drilling spindles (14 spindles each for X and Y) Suction and clamping shoes: 2 pieces Horizontal drilling spindles: 2 pieces for longitudinal drilling on the front and rear side Grooving head: 0°/90° swiveling Carrier: with linear guides for center support Workpiece center support: (automatically lowerable) with NC adjustment in X Workpiece support Workpiece stop: for processing strips Workpiece width: max. 140 mm Clamping of strips: via back gauge MACHINE DETAILS Height: 2,300 mm Length: 5,600 mm Width: 6,000 mm Basic equipment - NC width adjustment - 1 support with NC axis in Y on each side - 1 horizontal drilling station with 1 drilling spindle per side - 1 doweling tool with ELC glue monitoring per side - 1 vibratory conveyor with control mirror per side - Central axis with 1:1 glue pump - 2 NC height adjusters (Z-axis) - Belt infeed with NC-adjustable belt pulley - Workpiece transport with toothed belt and spring-loaded cams - Central lubrication - Telephone modem for remote diagnosis

Condition: excellent (used), Year of construction: 2015, operating hours: 6,609 h, Functionality: fully functional, machine/vehicle number: SL600Q-A0256, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 320 mm, workpiece height (max.): 340 mm, workpiece width (max.): 800 mm, workpiece length (max.): 570 mm, TECHNICAL DETAILS Workpiece dimensions flushing: 800 mm x 570 mm x 340 mm Workpiece dimensions submerged: 800 mm x 570 mm x 280 mm Maximum workpiece weight: 1,000 kg Work table dimensions: 1,050 mm x 850 mm X-axis: 600 mm Y-axis: 400 mm Z-axis: 320 mm UV-axis: 120 mm x 120 mm Maximum cone angle: ±25° (for workpiece thickness 130 mm) Wire diameter: 0.1 - 0.3 mm Maximum wire speed: 420 mm/s Wire tension: 3 - 23 N Weight of wire spool: 8 kg Processing method: flushing, submerged Table height: 995 mm Dielectric tank Deb Eufjvw Ag Aj D Dout External dimensions (W x D): 825 mm x 2,400 mm Weight (empty): 500 kg Tank capacity: 850 l Filtration method: 3 replaceable paper filters Ion exchanger: Ion exchange resin (18 liter type) MACHINE DETAILS Without accessories: 2,635 mm x 2,865 mm x 2,300 mm With accessories: 3,920 mm x 4,215 mm Machine weight: 4,500 kg Transport dimensions: 2,635 x 2,865 x 2,200 mm Operating hours: 67,181 h Cutting time: 6,609 h Air pressure: 0.5 MPa Air flow: 30 NL/min Power consumption: 13 kVA EQUIPMENT - Wire chopper (L-Cut) - Taper Flex 3D Optional extension: Solidworks and DemaCut can be purchased for an additional EUR 5,000.

Condition: used, Year of construction: 2011, operating hours: 4,433 h, Functionality: fully functional, machine/vehicle number: 0163000561, TECHNICAL DETAILS Turning length: 1200 mm turning diameter: 600 mm Speed: 3000 rpm C-axis and spindle brake (hydraulic): Automatic tailstock Control: Siemens 840D SL with ShopTurn Drive power 100/40% ED: 27.5 / 38.7 kW Tool turret: 12-position (disk turret) Number of driven tools: 12 Tool holder: VDI 40 MACHINE DETAILS Switch-on time: 17,831 h Spindle hours: 4,433 h Weight: 5.3 tons Connected load: 42 kVA EQUIPMENT Reinforced coolant pump max 10 bar, 20 l/min Hydraulic chuck 315-91 ROTA NCK plus, Schunk Operating mode 4 - manual intervention with open work area doors Dusbjtr D Spj Euf D Dst Electrostatic air filter LTA Series 3000, AC 3001-R Year of manufacture 2015 Documentation Extensive additional accessories, e.g. 90 tool holders VDI40, 5 driven tools, Coromant Capto system, tool cabinets, tool trolleys, etc

Condition: good (used), Year of construction: 2012, Functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, table width: 400 mm, table length: 600 mm, TECHNICAL DETAILS Travel paths of axes X / Y / Z: 400 x 300 x 350 mm Positioning speed of axes X / Y / Z: 6 / 6 / 15 m/min Positioning speed in manual mode of axes X / Y / Z: 2 m/min Acceleration of axis Z: 10.0 m/s² Resolution of axes X / Y / Z: 0.1 µm Laser correction of axes X / Y / Z: linearity / angle / spindle pitch Integrated C-axis Max. electrode weight: 50 kg Rotational speed: 0 -100 g/min Max. mass moment of inertia: 5,000 kg cm² Max. working current: 140 A (in rotation mode) Max. working current: 140 A (static) Positioning accuracy according to ISO 230-2: 0.007° Resolution: 0.0005° Dielectric unit Capacity: 490 l Filter type: 4 cartridges Cooling system: Heat exchanger dielectric / water Temperature control: ±1 °C automatic Generator Generator type: ISPG (Intelligent Speed Power Generator) Pulse current: 80 A Best surface roughness Ra: 0.1 µm IQ module (graphite, copper): integrated Control Operating system: Windows XP Data input: 15" LCD screen, mouse or touchscreen, keyboard and remote control User interface: Vision 5 Work area Clamping plate with hole pattern: Hole spacing 50 mm Distance table - chuck: 170 - 520 mm Distance floor - clamping level: 1,000 mm Max. table size: 600 x 400 mm Max. work basin dimensions: 900 x 630 x 350 mm Workpiece and electrode Max. electrode weight: 50 kg Max. workpiece weight: 800 kg Max. workpiece dimensions: 820 x 580 x 250 mm Bath level: 0–290 mm Compressed air Pressure: 6 - 8 bar Average consumption: 100 ± 10 % m³/h Max. consumption: 270 l/min at a pressure of 6 bar while filling the work tank (duration approx. 40 s) Connection: hose coupling Ø 13 mm Cooling water Temperature: room temperature - 7 °C Quantity: approx. 20 l/min Pressure: 1.5–3 bar Cooling and environment Heat exchanger for control cabinet: integrated Heat exchanger for dielectric: integrated Ambient temperature: recommended 20 °C - 25 °C Dusb Eufjvuqmfs D Det MACHINES DETAILS Machine dimensions: 2,460 x 1,410 x 2,600 mm Dimensions with electrode changer: 2,460 x 2,100 x 2,600 mm Dimensions with pallet changer: 2,460 x 2,630 x 2,600 mm Weight Total weight: 3,830 kg Dielectric weight: 400 kg EQUIPMENT 1 heat exchanger for control cabinet, integrated. 1 heat exchanger for dielectric, integrated.

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 34938, cutting length (max.): 4,300 mm, cutting height (max.): 2,200 mm, cutting depth: 80 mm, rotational speed (max.): 4,750 rpm, TECHNICAL DETAILS Swivel adjustment: 0 - 90° (manual) Cutting area: 4300 x 2200 x 80 mm Speed: 4750 rpm Feed: manual Design: automatically deflecting slatted frame Saw carriage lock: manual Saw unit immersion: manual Dujb Eufoub Tr Ej D Djt MACHINE DETAILS Motor power : 4,4 kW Space requirement L x H x W: 5400 x 2900 x 1600 mm Type of installation: wall-mounted or free-standing

Condition: excellent (used), Year of construction: 2016, operating hours: 44,682 h, Functionality: fully functional, turning diameter: 20 mm, spindle bore: 24 mm, rotational speed (max.): 10,000 rpm, feed length Z-axis: 210 mm, product length (max.): 80 mm, TECHNICAL DETAILS Control system: FANUC 32i-B Number of axes: 8 Main spindle Max. turning diameter: 20 mm Max. spindle bore diameter: 24 mm Max. speed: 10,000 rpm Max. power: 3.7 kW C-axis: 0.001° Z1 stroke: 210 mm Dob Eufsvuy N Aj D Deut Guide bush unit - synchronously rotating Type of guide bush: 22,001 / T223 Type of collet: 145E / F25 Counter spindle Max. speed: 8,000 rpm Max. power: 3.7 kW Max. gripping diameter: 20 mm Max. part length (forward ejection): 80 mm C-axis: 0.001° Z2 stroke: 210 mm Type of collet: 145E / F25 Tool slide X1, Y1 Tool holder plate: for 6 external turning tools 12 x 12 mm Cross drilling/milling device Number: 5 driven drilling/milling spindles modular Tool sizes: 2 x ER16, 3 x ER11 Power: 1.0 kW (S6000) Front drilling device: for 5 drilling spindles Rear machining with Y2 axis Tool carrier: for 8 tools 4 driven drilling/milling spindles: ER16 modular 4 fixed drilling/milling spindles: ER16 modular Speeds Rapid traverse: 40 m/min (X1, Z1, C1, Y1, Z2, C2, X2, Y2) MACHINE DETAILS Operating hours: 44,682 h Connected load: 15 kVA Bar loading magazine: FMB Turbo 2-20, 2-23 mm/3,200 mm, attachment variant "A" Dimensions and weight Machine (L x W x H): 2,460 x 1,380 x 1,730 mm Weight of machine: approx. 2,900 kg Loading magazine (L x W x H): 4,220 x 620 x 1,800 mm Weight of loading magazine: approx. 600 kg Peripherals & accessories (L x W x H): 1,900 x 700 x 800 mm Weight of peripherals & accessories: approx. 200 kg EQUIPMENT - Alignment shoes with leveling elements - Service tool set - Work area light - 3-color signal lamp - Safety door switch with lock - Maintenance and central lubrication unit with 1.8 l lubricating oil - Pneumatic blow-out device for the Pick-up spindle collet - Color monitor LCD/MDI - Parts conveyor belt with drip tray - Chip conveyor with coolant pump - Small fire extinguishing system Kraft und Bauer with CO₂ extinguishing agent container - Manual and documentation - Automatic shutdown function PowerOff - Program check function: test run possible via handwheel - Continuous thread cutting cycle - Runtime display/part counter - CF card interface - Tool radius compensation - Absolute reference point - Self-diagnosis function - Interface for JBS - Parts conveyor belt with drip tray - 1° indexing on pick-up spindle - Chip conveyor with coolant pump - Coolant oil

Condition: used, Year of construction: 2015, operating hours: 7,947 h, Functionality: fully functional, machine/vehicle number: 12710000163, Maho DMU 95 monoBLOCK lid with comprehensive equipment TECHNICAL DETAILS X / Y / Z travel: 950 / 850 / 650 mm C-axis: 360° Speed: motor spindle 18,000 1/min Clamping surface C-axis table: 850 x 750 mm Clamping surface fixed table: 1,000 x 750 mm Control: CELOS® with Siemens 840D sl Operate Spindle power: 35 kW (40% ED) / 25 kW (100% ED) Tool holder: HSK-A 63 according to DIN 69893 Tool clamping: according to DIN 69872 Magazine slots: 60 (chain magazine) MACHINE DETAILS Weight: 13.7 t Connected load: 50 kVA Switch-on time: 23,422 h Spindle hours: 7,947 IKZ: 40 bar / 23 l/min through spindle center (AD) External coolant supply: 4 bar / 40 l/min EQUIPMENT Dobotr D H Sj Euf D Deut - MPC Machine Protection Control chip tray with integrated coolant tank 500 l - 21.5 ERGOline® Control with multi-touch screen - 3D path control - Scraper belt chip conveyor with coolant system 600 liters, paper belt filter - Infrared measuring probe Renishaw PP60 optical (OMP 60) - 3D quickSET toolkit for checking and correcting the kinematic accuracy of 5-axis machine configurations - Coolant ring nozzle for vertical headstock, 15 water nozzles, 5 air nozzles - Flushing gun with pump 2 bar / 40 l/min - Cooling device Blast air through spindle center, selectable via M function - Operating mode 4 - manual intervention with open work area doors - Double switchover filter from Mahle on the coolant tank - Electrostatic air filter LTA 3000 BASIC Line 3002 year of construction 2015 - Documentation - Extensive additional accessories, e.g. 240 HSK-A 63 tool holders, long zero-point clamping system, extensive spindle tools (including - spindle tools (including Wohlhaupter), Coromant Capto system, tool cabinets, tool trolleys, etc.

Condition: good (used), Year of construction: 1999, Functionality: fully functional, turning length: 205 mm, rotational speed (max.): 10,000 rpm, bar diameter: 20 mm, number of slots in tool magazine: 18, TECHNICAL DETAILS Control system: Cincom Mitsubishi Meldas Number of axes: 7 (X1, Z1, Y1, C1, X2, Z2, C2) Machining range Max. bar diameter: 20 mm Max. turning length: 205 mm Spindle Main spindle speed: max. 10,000 rpm Main spindle C-axis: 0.001° Counter spindle speed: max. 10,000 rpm Counter spindle C-axis: 0.001° Tool capacity Tool holder: for a total of 18 tools (linear tool holder, front attachment, rear machining) MACHINE DETAILS Machine (L x W x H): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Loading magazine (L x W x H): 3,900 x 900 x 1,450 mm Djb Eovuyf Rsuf D Deut Weight of loading magazine: 850 kg EQUIPMENT - Parts conveyor belt - Loading magazine FMB Turbo 3-26