Second-hand machinery for sale (2,405)

Condition: reconditioned (used), Year of construction: 1986, Functionality: fully functional, machine/vehicle number: 12473, travel distance X-axis: 2,995 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 795 mm, spindle speed (max.): 2,000 rpm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 2,995 mm Y-axis travel: 800 mm Z-axis travel: 795 mm Table size: 2,995 × 800 mm Number of T-slots: 5 Coolant tank: 300 L Spindle Tool holder: SK50 Spindle speed: max. 2,000 rpm Dceln E E Tov R Dxmsfeg Feed Max. feed rate: 5,000 mm/min Max. rapid traverse: 6,000 mm/min MACHINE DETAILS Installation dimensions: 8,000 × 3,500 × 3,000 mm EQUIPMENT - CNC control retrofitted by NCT - Horizontal and vertical machining possible

Condition: good (used), Year of construction: 1998, operating hours: 12,786 h, Functionality: fully functional, Bed milling machine with universal milling head/two-axis milling head with automatic tool clamping TECHNICAL DETAILS Travel X / Y / Z: 1,500 / 1,000 / 1,000 mm Speed range: 30 - 3,500 rpm Drive power: 25 kW Swivel range: 360° Torque: max. 700 Nm (50 % ED) Tool holder: SK 50 Tool changer: Portal Tool positions: 24 Table size: 1,600 x 800 mm Feed X / Y / Z: 0.001 - 6 m/min Dcsln E Estqcq Ro Tfsg Rapid traverse X / Y / Z: 10 m/min MACHINE DETAILS Connected load: 42 kW Machine weight: 12,500 kg Space requirement (LxWxH): 6.1 x 5.2 x 2.9 m EQUIPMENT - Electronic handwheel - Heidenhain HR - Measuring probe

Condition: reconditioned (used), Year of construction: 2005, operating hours: 5 h, Functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, number of slots in tool magazine: 30, swivel angle B-axis (min.): -10 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, documentation/manual, Spindle overhaul in December 2024 - geometry protocol available below Vertical machining center with linear drive technology and gantry design for maximum precision TECHNICAL DETAILS X-path: 750 mm Y-path: 650 mm Z-path: 650 mm C-axis: 360° B-axis: -10° to +110° Control: HEIDENHAIN iTNC 530 Spindle Spindle speeds (infinitely variable): 1 - 18,000 rpm Tool holder: HSK-A 63 Table Table diameter: 750 mm Table load: max. 0.6 t Tool magazine Capacity: 30 places MACHINE DETAILS Total power requirement: 70 kW Machine weight: approx. 12,000 kg Control system switch-on time: 11,679 h Machine switch-on time: 10,985 h Dcoln Ejvkcy Ns E Tfeg Program run time: 5,070 h Spindle running time: 4,753 h - after overhaul in December 2024: 5 h EQUIPMENT - Direct path measuring system - Bed flushing - IKZ - internal coolant supply through the center of the spindle - Paper belt filter incl. Visiport and rinsing gun - Cooling device with blast air on the outside of the spindle - Temperature compensation - Active cooling unit for drives, control cabinet and motor spindle - Scraper belt chip conveyor - Tool breakage check incl. tool length and diameter measurement via laser Calibration ring - Heidenhain measuring probe - Heidenhain 410 manual control panel for set-up mode - documentation

Condition: ready for operation (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: PAC253218601, sheet thickness (max.): 25 mm, cutting length (max.): 3,200 mm, No minimum price - guaranteed sale at the highest bid! Machine type: Hydraulic swing pruning shears Practica (SPECIAL DESIGN) Design: Hydraulic and motorized specially designed for continuous operation TECHNICAL DETAILS Capacity: 3,200 x 25 mm (25 mm mild steel, tensile strength Rm = 420 N/mm²) Cutting angle: 2.5° Number of strokes: approx. 10 / minute Stroke rate for cutting length 3,200 mm: 13 1/min Stroke rate for cutting length 2,000 mm: 17 1/min Stroke rate for cutting length 1,000 mm: 20 1/min Cutting system Blades: Highly tempered for cutting high-strength steels Partial blade lengths: 3 partial lengths of approx. 1 meter Upper blade: 2 cutting edges Bottom blade: 4 cutting edges CNC-controlled cutting gap adjustment: Yes Sheet metal downholder opening: 100 mm (between underside of downholder and bottom knife) Cutting beam opening left: 100 mm (between upper knife and lower knife) Cutting beam opening right: Up to approx. 240 mm Angle stop stroke: approx. 40 mm Heavy-duty ball rollers: 12 pieces MACHINE DETAILS Engine power: 90 kW Additional hydraulic power: 30 kW Total output: 120 kW Control system: Siemens S7-1200, CPU 1215C Digital inputs: 9 Digital outputs: 12 Display: 9 inch touch screen Hydraulic components: Bosch-Rexroth Machine body dimensions (LxWxH): approx. 4,200 x 2,450 x 2,500 mm Weight: approx. 30 tons EQUIPMENT - Heavy-duty support arm / angle fence, manually adjustable in width on linear guide, equipped with automatically retractable angle fence - Length (measured from the cutting edge): 2,000 mm - T-slot on both sides to accommodate stop cams - Oil cooler - Special version for high-speed cutting - Machine frame in special design (approx. 30 tons instead of 22.5) - Adaptations/special hydraulics with additional hydraulic unit with separate motor and pump - Separate oil cooler - Control system enables manual or robot operation Djln E Eeulwgvs Tfecg

Condition: like new (used), Year of construction: 2022, operating hours: 50 h, Functionality: fully functional, paper weight (max.): 100,000 g/m², paper width (max.): 1,625 mm, paper height (max.): 200 mm, Reason for return: The printer has not printed for 50 hours. The business area has not grown as expected, so the printer has been standing more than it has been in operation. Condition: The print head has been flushed and all nozzles have been printed as a test image in the test print before flushing. A new head may be required for commissioning. No minimum price - guaranteed sale to the highest bid! TECHNICAL DETAILS Printing process: Piezo inkjet Print width: 1,625 mm Paper thickness/height: 0.01 to 200 mm Weight capacity of the print bed: 100 kg/m² Print bed size: 1,690 (W) x 3,066 mm (D) Print size: 1,604 (W) x 2,500 (L) x 200 mm (H) Ink cartridges Type: Roland ECO-UV EUV-5 Colors: Cyan, magenta, yellow, black, white, gloss, primer Ink type configurations: CMYKWhGlPr Vacuum system: 2 vacuum zones Print resolution: max. 1,440 dpi Motion drive: High-resolution stepper motor Print accuracy: Error rate max. ±0.3 % of the distance traveled or ±0.3 mm (depending on the larger value) Repeat accuracy: ± 0.01 mm Output modes: Continuous, unload, back to origin, layered Media height adjustment: Manual or automatic sensor Surface control: Manual or automatic sensor Delovfr H Uon E E Tfscg Control: 7-inch color LCD touch screen Network: Ethernet base 10/100 MACHINE DETAILS Printer dimensions: 2,815 x 3,126 x 1,490 mm Control panel dimensions: 530 x 530 x 1,080 mm Weight: 800 + 50 kg Ambient conditions: 20 - 32 °C, 35 - 80 % humidity Power supply: 230 V, 16 A, 2P+E Power consumption: max. 2.65 kW in operation with vacuum Sound pressure level printing / stand-by: < 70 / 40 dB Transport dimensions: 3,500 x 2,000 x 1,776 mm Transport weight: 1,180 kg

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, TECHNICAL DETAILS Control: FANUC 32i turning diameter: 365 mm Bar diameter: max. 65 mm Djletwcpbsn E E Tfscg Speed: max. 5,000 1/min Bar loader: TOP-Automazioni XF 475 Bar length: max. 4,200 mm EQUIPMENT Turret with 12 stations (not driven) Tailstock Chip conveyor without air filter

Condition: good (used), Year of construction: 2002, Functionality: fully functional, spindle speed (max.): 8,000 rpm, No reserve price - guaranteed sale to the highest bidder! Spindle speed: 8000 rpm Specifications according to manufacturer - without guarantee: X-axis: 610 mm Y-axis: 560 mm Z-axis: 510 mm Max. workpiece weight: 300 kg Dcsln Esv R Diro E Tfog Tool positions: 20 Spindle taper: CAT 40

Condition: excellent (used), Year of construction: 2005, operating hours: 5,607 h, Functionality: fully functional, machine/vehicle number: 181174, turning diameter: 660 mm, travel distance X-axis: 580 mm, travel distance Z-axis: 1,045 mm, swivel angle B-axis (max.): 225 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Machine type: 5-axis simultaneous & 5-axis freeform – CAP Tool System Year of manufacture: 10/2005 Max. swing diameter: Ø660 mm Max. machining diameter (upper/lower turret): Ø660 mm / Ø270 mm Max. machining length: 1016 mm X-axis travel (upper turret): 580 mm X2-axis travel (lower turret): 150 mm Z-axis travel (upper turret): 1045 mm Z2-axis travel (lower turret): 990 mm B-axis travel: 225° C-axis travel: 360° Chuck size: 8" Main spindle speed: 5000 rpm Main spindle bore: Ø51 mm Deln E E Tswcl Uxefjcg Min. main spindle indexing: 0.0001° Chuck size 2nd spindle: 8" Speed of 2nd spindle: 5000 rpm Travel of 2nd headstock (W-axis): 1050 mm Rapid traverse speed of 2nd headstock (W-axis): 30,000 mm/min Min. indexing of 2nd spindle: 0.001° Turret type (upper): With ATC Tool shank height (upper): 25 mm Boring bar shank diameter (upper): Ø40 mm Turret type (lower): Drum turret with 9 stations Number of tools (lower): 9 tools Tool shank height (lower): 25 mm Boring bar shank diameter (lower): Ø32 mm Turret indexing time (lower): 0.14 s per switching operation Milling spindle speed: 12,000 rpm Milling spindle machining capacity: milling Ø100 mm, end milling Ø32 mm, drilling Ø30 mm, tapping M27 Rapid traverse speed X-axis (upper turret): 38,000 mm/min Rapid traverse speed X2-axis (lower turret): 38,000 mm/min Rapid traverse speed Y-axis: 26,000 mm/min Rapid traverse speed Z-axis (upper turret): 38,000 mm/min Rapid traverse speed Z2-axis (lower turret): 38,000 mm/min Rapid traverse speed C-axis: 400°/min Jog feed speed X-axis (upper turret): 2,000 mm/min Jog feed speed X2-axis (lower turret): 2,000 mm/min Y-axis jog feed rate: 2,000 mm/min Z-axis jog feed rate (upper turret): 2,000 mm/min Z2-axis jog feed rate (lower turret): 2,000 mm/min C-axis jog feed rate: 2,000°/min Tool shank / tool holder capacity: CAPTO C6 – 20 tools Max. tool diameter: Ø90 mm (Ø125 mm with free adjacent positions) Max. tool length: 300 mm Max. tool weight: 10 kg Tool change time (tool-to-tool): 1.3 s Main spindle motor (30 min / continuous operation): AC 22 kW / AC 15 kW 2nd spindle motor (30 min / continuous operation): AC 18.5 kW / AC 15 kW Milling spindle motor (20% ED): AC 15 kW Coolant pump motor: 1.2 kW Power consumption (continuous operation): 66.0 kVA Compressed air connection: 5 bar, 500 l/min Coolant tank capacity: 300 l MACHINE DETAILS Machine height: 2,597 mm Operating times: - Total time switched on: 2026:04'40" - Automatic operating time: 1323:07'43" - Automatic cutting time: 669:16'50" - Total cutting time: 5606:49'54" - Total operating time: 2028:04'40" EQUIPMENT Various machining tools included Test and demonstration on site possible

Condition: ready for operation (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: 188220388, grinding length: 2,000 mm, grinding width: 750 mm, grinding height: 550 mm, table length: 2,500 mm, table width: 740 mm, TECHNICAL DETAILS Control: conventional Grinding width: max. 750 mm Grinding height: 550 mm Grinding length: max. 2000 mm Magnetic clamping surface: 2500 x 740 mm MACHINE DETAILS Operating voltage: 3 x 380V, 50 Hz Deln E Ejvvty Ds Tfscg Total power requirement: 50 kW Machine weight: approx. 18 t

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,800 h, Functionality: fully functional, turning length: 100 mm, turning diameter: 100 mm, spindle speed (max.): 4,000 rpm, spindle bore: 42 mm, HIGHLIGHTS - Used exclusively for processing brass, therefore no above-average wear of the machine components - Extension of the tool system also includes driven tools - Service carried out exclusively by the manufacturer Müga itself - Extremely rare to find, very low number of operating hours - Expansion of the tool system to a total of 42 tools (only 29 with standard equipment) Note: no longer used in production for approx. 18 months TECHNICAL DETAILS Control system: Mitsubishi M700 Smallest input increment: 0.1 μm Linear axes rapid traverse: 20 m/min Main spindle C-axis: available Drive power: 7.5 kW Bar capacity: 42 mm Turning length: max. 100 mm Turning diameter: max. 100 mm Speed: max. 4,000 rpm Tool system: 20 pieces Counter spindle C-axis: available Drive power: 3.7 kW Spindle bore: 30 mm Turning length: max. 100 mm Turning diameter: max. 100 mm Pick-up diameter: max. 42 mm Spindle speed: max. 4,000 rpm Tool system: 22 pieces MACHINE DETAILS Weight: 4,200 kg Space requirement: 3,480 x 2,247 x 1,920 mm Djln Eet Suf Aj E Tfecg Pneumatic connection: 5 - 6 bar Connected load: 21 kW Back-up fuse: 35 A Parts ejector: pneumatic with electronic monitoring Rinser: Counter spindle Bar loading magazine: length 3.2 m / bar diameter 5 - 42 mm Magazine capacity: 28 bars with a diameter of 10 mm EQUIPMENT - Central lubrication - Chip conveyor - Swivel control panel - Finished part catcher - Collet chuck 173E (main spindle) - Finished part conveyor belt - Collet chuck 173E (counter spindle) - Interface for bar loader - C-axis main spindle - Intelligent handwheel - C-axis counter spindle - Control cabinet heat exchanger - Y-axis for main and counter spindle - Set-up elements - Coolant unit 250 liters - 3 x IKZ connection (4 bar) for 3 drilling tools on main spindle

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 085/2007.01, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, controller model: Andronic 2060PKM, swivel angle B-axis (max.): 360 °, TECHNICAL DETAILS X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 500 mm C-axis (table): 360° Control: Andronic 2060PKM Rotary table diameter: 260 mm Spindle Spindle mount: HSK A63 Working spindle speed range: 15,000 rpm Feeds and speed Feed: 1 - 5,000 mm/min Rapid traverse X/Y: 15 m/min Rapid traverse Z: 12 m/min Delovykxrsn E E Tfecg MACHINE DETAILS Machine weight: approx. 6.0 t Control cabinet (L x W x H): 2.4 x 0.6 x 2.2 m Machine (L x W x H): approx. 3.5 x 2.4 x 3.2 m Total power requirement: approx. 42 kW EQUIPMENT - 5-axis parallel kinematics for prototype production

Condition: ready for operation (used), Year of construction: 1993, operating hours: 3,256 h, Functionality: fully functional, sheet thickness (max.): 13 mm, sheet width: 3,150 mm, distance between stands: 3,670 mm, TECHNICAL DETAILS Doln Eovykwne E Tfscg Max. sheet width: 3,150 mm Max. sheet thickness: 13 mm Stand width: 3,670 mm Blade length: 3,150 mm Holders: 18 pieces Back stop Type: Motorized Travel path: 1,000 mm Positioning: Yes MACHINE DETAILS Height above floor: 850 mm Table size (L x W): 3,770 x 500 mm Machine dimensions (L x W x H): 4.4 x 2.8 x 2.4 m Machine weight: approx. 12.9 t Total power requirement: 30 kW EQUIPMENT - Hydraulic sheet holding device. - Cutting gap lighting - Safety light curtain at the rear - Short stroke and continuous operation possible

Condition: good (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 662172, feed length X-axis: 600 mm, feed length Y-axis: 450 mm, feed length Z-axis: 450 mm, spindle speed (max.): 6,300 rpm, number of slots in tool magazine: 30, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm Control type: CNC 532 Feed range / rapid traverse Feed in X, Y, and Z axes: 1 - 6,000 mm/min Rapid traverse in X and Z axes: 6 m/min Rapid traverse in Y axis: 6 m/min 2-axis NC table Clamping surface: Ø 320 mm Center bore: Ø 30 H7 mm Number/spacing of T-slots: 5/63-14 H7 mm Rapid traverse for swiveling/rotating: 16/40 rpm Swivel range: ± 105° Rotation range: n x 360° Max. table load: 100 kg Main Drive Three-phase motor power: 10.0 kW Switching speeds: 2 Work spindles & tools Tool holder: SK 40 Number of tools: 30 (universal) Speed range: continuously variable from 20 - 6,300 rpm Vertical quill stroke: 80 mm MACHINE DETAILS Machine weight: approx. 3,600 kg Machine start-up time: 1193:27:30 Spindle time: 193:02:52 EQUIPMENT - Universal tool changer - Direct position measuring system - Automatic vertical milling head activation - Internal coolant supply & cooling unit - Chip conveyor - Tool breakage detection - Infrared measuring probe Doln Eov Ryamo E Tfscg

Condition: ready for operation (used), Year of construction: 1974, Functionality: fully functional, throat depth: 400 mm, installation height: 400 mm, pressing force: 160 t, ram stroke: 140 mm, TECHNICAL DETAILS Pressure force: 160 t Pillar stroke: 32 - 140 mm Pillar adjustment: 100 mm Dolnovyix De E E Tfecg Stroke rate: 50 strokes/min Thrust: 400 mm Installation height: 400 mm Drawing depth: 63 mm Pressure force at maximum drawing depth: 63 t Adjustment of the ram slide: 100 mm Operating options: single stroke / continuous stroke Operation: foot and hand operation possible Table and work surfaces Table size: 1,000 x 750 mm (without clamping plates) Pillar surface: 850 x 630 mm Tenon hole: 400 x 360 mm MACHINE DETAILS Machine weight: approx. 10.5 t Machine dimensions (L x W x H): 2.9 x 1.25 x 3.3 m Electrical control cabinet (L x W x H): 1.06 x 0.6 x 2.0 m Energy and operating requirements Total power requirement: 15.5 kW Compressed air: 6 kp/cm² Oil filling: approx. 30 liters Power connection: 80A EQUIPMENT - Clamping plates with different dimensions: 1x 1,200 x 760 x 90 mm / 1x 1,200 x 760 x 70 mm - Tenon hole Ø 300 mm

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, throat depth: 625 mm, punching force: 40 t, overall weight: 2,700 kg, stroke distance: 80 mm, TECHNICAL DETAILS Operation: via foot switch Thrust: 625 mm Stroke rate: 34 strokes/min Doln E Eevyiiio Tfecg Punching force: 40 t Stroke: 80 mm Shearing station Flat steel cutting: max. 380 x 20 mm / 480 x 15 mm Bevel cutting: max. 120 x 15 mm Holder: adjustable in length to 750 mm Knife cutting edges: 2-way upper knife, 4-way lower knife Profile station Application: processing of round and square profiles, U-profiles, double-T beams, unequal-sided angles Angle steel: - 90° shearing: max. 150 x 15 mm - 45° shearing: max. 80 x 10 mm Profile cutting: - Round steel: max. Ø 50 mm - U-H profile: max. 160 x 90 mm - T profile: max. 120 x 12 mm Punching station Table size: 600 x 600 mm Max. bore: Ø 57 x 12 mm Working stroke: 80 mm Stroke rate: 34 strokes/min Punching pressure: 40 t Stop angle: 200 x 100 mm (L=600 mm) Notching station Table size: 450 x 450 mm Notches/notches Material thickness: 13 mm Notch width: 52 mm Notch depth (V 90°): 70 - 100 mm Angle flange: 100 x 13 mm MACHINE DETAILS Total power requirement: 7.5 kW Machine weight: approx. 2.7 t Machine dimensions (L x W x H): 1.4 x 0.8 x 1.8 m EQUIPMENT - Adjustable hold-down clamp - Reusable cutting edges for longer durability - Accessories available on request

Condition: ready for operation (used), Year of construction: 1990, Functionality: fully functional, wall thickness: 25 mm, overall weight: 2,800 kg, pipe diameter: 42 mm, controller model: RC 7000, TECHNICAL DETAILS Area of application: Processing of deformable pipes, rectangular pipes, round bars and square pipes. Pipe diameter: 42 mm Wall thickness: 2.5 mm Round steel (max.): Ø 20 mm Square material (pipe): 25 x 25 mm Rectangular pipe: 42 x 20 x 2.5 mm Bending performance Max. bending radius (inside): Ø 20 mm Max. bending radius (outside): Ø 170 mm Bending speed: not specified Bending direction: to the left Pipe lifting length: 3,000 mm Control Djln Eevyib Se E Tfjcg Software: RC 7000 Programming: Manual Operation: via control panel MACHINE DETAILS Machine weight: approx. 2.8 t Machine dimensions (L x W x H): 5.1 x 0.7 x 2.0 m Control cabinet dimensions (W x D x H): 800 x 700 x 2,000 mm EQUIPMENT - Various bending tools for pipe Ø 25 mm - 12 different collets - Various auxiliary and clamping devices

Condition: ready for operation (used), Year of construction: 1970, Functionality: fully functional, workpiece weight (max.): 800 kg, rotational speed (max.): 3,600 rpm, working length: 2,600 mm, workpiece diameter (max.): 1,250 mm, TECHNICAL DETAILS Purpose: Measuring and balancing static and dynamic imbalance of rotors Max. balancing body weight: 800 kg (with even load distribution, 400 kg per bearing stand) Max. balancing body diameter: 1,250 mm Speed ranges Measuring speed per gear: 1st gear: 190 - 650 rpm Dcsln E E Tevyh Ttofsg 2nd gear: 400 - 1,250 rpm 3rd gear: 700 - 2,100 rpm 4th gear: 1,200 - 3,600 rpm Mechanical specifications Bed length: 2,600 mm Bearing journal diameter (min./max.): 16-95 mm / 95-180 mm Bearing center distance min.: 125 mm Shaft end bearing center max.: 2,070 mm Power transmission: by means of Cardan shaft MACHINE DETAILS Machine dimensions (L x W x H): approx. 3.5 x 1.7 x 2.0 m Control cabinet dimensions (W x D x H): 650 x 250 x 800 mm Machine weight: approx. 1.5 t Voltage: 380 V Drive power: 7.5 kW EQUIPMENT - Schenk measuring device with digital display - Manually movable support stands - Accessory package with various rotor shafts and rotor mounts on request

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, bending angle: 75 °, overall weight: 1,000 kg, motor voltage: 380 V, rotational speed (min.): 15 rpm, working height: 850 mm, TECHNICAL DETAILS Max. bending angle: 75° Bending angle options: 40° / 60° / 75° Single and double bending of reinforcing steel: possible Number of bending forms: 2 pieces Bar size Angle form: Ø 12 - 50 mm Double angle: Ø 12 - 35 mm Bending plate Diameter: Ø 480 mm Speed: 7.5 / 15 rpm Bending pin hole: Ø 48 mm (16 pieces) Center pin: Ø 50 x 94 mm Counterholding strips Number: 2 pieces Length: 840 mm Displacement: per handrail 100 mm Holes: 13 pieces, Ø 48 mm MACHINE DETAILS Dimensions (L x W x H): approx. 1.9 x 2.6 x 1.0 m Transport dimensions (L x W x H): 2.6 x 1.8 x 1.0 m Working height: 850 mm Operating voltage: 380 V Machine weight: approx. 1.0 t EQUIPMENT - Control panel with touch screen - Bending attachments: 2x Ø 60 mm 2x Ø 78 mm 1x Ø 96 mm 1x Ø 122 mm 1x Ø 160 mm 1x Ø 200 mm - 1x pin for plate - 8x counterholders of various shapes - Bending tray Dcoln E E Tevyhihsfeg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 2,160 h, Functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 590 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 6,000 rpm, Equipment: rotational speed infinitely variable, Application: drilling, countersinking, reaming, thread cutting and milling of metal, aluminum, plastic and wood TECHNICAL DETAILS X-axis: 3,200 mm Y-axis: 550 mm Z-axis: 590 mm Control model: Heidenhain iTNC 530 Tool and spindle data Tool holder: SK 40 Speed range (infinitely variable): 100 - 6,000 rpm Feed and speed Rapid traverse range (X/Y/Z): 50 / 25 / 25 m/min Feed speed: 0 - 5,000 mm/min MACHINE DETAILS Machine weight: approx. 7.5 t Machine dimensions (LxWxH): 6.0 x 2.3 x 2.5 m Space requirement (LxWxH): approx. 6.0 x 4.50 x 2.9 m (30 m²) Switch-on hours: approx. 6,529 h Program running time: approx. 2,160 h Control switch-on time: 10,926 h Interface: 232-C Operating pressure: 7 bar Connection: 3x 400V / 50 Hz Total power requirement: 15 kVA EQUIPMENT - Mineral cast bed - Coolant system (300 liter container) - Position measuring system: rotary encoder / length measuring system - Drives: X-axis (50 m/min) via pinion and rack; Y and Z axis (25 m/min) via ball screw - Central lubrication (manually operated) - Control cabinet with Rittal SK 3303100 cooling unit - Heidenhain path control - Control panel with electronic handwheel - Workpiece clamping using clamping supports (approx. 15 bars) - Hydraulic tool change via control Dcjln Eevyg Nge E Tfeg - 4x chip drawers - Various clamping devices and clamping elements - Barrier fence (safety fence) - Knut measuring device

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, turning length: 595 mm, spindle speed (max.): 4,500 rpm, bar passage: 62 mm, Equipment: chip conveyor, TECHNICAL DETAILS Control: FANUC 18i-TB Speed: 4,500 rpm Bar capacity: 62 mm Working area Number of axes: 4 (X, Z, C, B) Turning length: 595 mm Counter spindle: available Tools and turrets Turret positions: 12 pcs Equipment Coolant system: Powercool Bar loader: LNS Quickload Servo 3 EQUIPMENT - Driven tool stations - Finished part removal system Doln E E Tovvuddefscg - Conveyor belt - Chip conveyor - Steel holder - Clamp holder - Collets

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 2188, turning length: 800 mm, turning diameter: 550 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 10 rpm, quill stroke: 150 mm, bar passage: 91 mm, Modernization in 2006 TECHNICAL DETAILS Control: FANUC 18-i TB Speed: 10 - 2,800 rpm Turning diameter: 550 mm Turning length: 800 mm Swing diameter: 800 mm Bar passage: 91 mm Chuck diameter: 450 mm Dolovvubvjn E E Tfscg Tailstock diameter: 120 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock quill stroke: 150 mm Number of tool stations: 12 MACHINE DETAILS Total power requirement: 44 kW Machine weight: 8 t

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, turning length: 550 mm, turning diameter: 400 mm, spindle speed (max.): 5,000 rpm, controller manufacturer: Siemens, controller model: 810 D ShopTurn, number of slots in tool magazine: 9, TECHNICAL DETAILS Control: Siemens 810 D ShopTurn Turning diameter: 280/400 mm Spindle speed (max.): 5,000 rpm Turning length: 550 mm Tools Tool holder type: steel holder, 9 pieces Dcelnovvuaxe E E Tfjg Tool holder: VDI 30 Turret positions: 12 pieces EQUIPMENT - Driven tool stations - Oil mist extraction - Coolant system - Cabin with extraction, Donaldson Tirit DCE brand - Three-jaw chuck, Schunk brand

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, turning diameter: 520 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, spindle diameter: 78 mm, distance between centers: 1,110 mm, TECHNICAL DATA Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Turning diameter: 520 mm Turning diameter over support: 150 mm Spindle speeds: 25 - 4,500 rpm Spindle bore: 78 mm Tool holder: VDI 40 Turret positions: 12 Rapid traverse: 15,000 mm/min Distance between the centers: 1110 mm Spindle motor drive: 18 kW MACHINE DETAILS Machine length: 5,000 mm Machine width: 2,800 mm Machine height: 3,200 mm Machine weight: approx. 14.5 t Dolnjvvt Uus E E Tfjcg

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, turning length: 864 mm, turning diameter: 762 mm, spindle speed (max.): 3,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, bar passage: 76 mm, TECHNICAL DETAILS Bar capacity: 76 mm Dcjln E Esvvt Ubj Tfsg Turning diameter: 762 mm Turning length: 864 mm Swing diameter: 762 mm Gearboxes and speeds Gear stage 1 Speed range: 3,400 rpm Axes X-axis travel: 287 mm Z-axis travel: 864 mm Lathe chuck Maximum lathe chuck diameter: 254 mm Tools Number of tools in the chain magazine: 12 MACHINE DETAILS Power: 22 kW Machine length: 3,300 mm Machine width: 2,000 mm Machine height: 2,000 mm Machine weight: approx. 7.2 t

Condition: used, Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 081222125 - 178/06, center width: 3,000 mm, turning diameter over bed slide: 830 mm, quill stroke: 200 mm, feed length X-axis: 455 mm, feed length Z-axis: 2,850 mm, rotational speed (max.): 1,600 rpm, TECHNICAL DETAILS Turning diameter: 630 mm X - stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Center distance: 3000 mm Spindle head: DIN 55027 - 11x290 Feed force - Z: 23.9 kN Feed force - X: 11.3 kN Rapid traverse speed X-axis: 6.8 m/min Rapid traverse speed Z-axis: 4 m/min Swing diameter over radial slide: 540 mm Max. swing diameter: 830 mm Travel path of the cross slide: 450 mm Spindle head max. passage for rolled material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outer diameter of the quill: 125 mm Dcslnsvvt Rij E E Tfjg Tailstock maximum quill stroke: 200 mm Tailstock inner taper: MK6 type Hydraulic tank: 15 l Coolant tank: 220 l Coolant tank for chip conveyor: 160 l Spindle stages Gear 1: 1 - 225 rpm Gear 2: 5 - 560 rpm Gear 3: 7 - 900 rpm Gear 4: 18 - 1600 rpm MACHINE DETAILS Machine length: 5200 mm Machine width: 2110 mm Machine height: 1995 mm Machine weight: approx. 6.850 t - Without chip conveyor and coolant tank