Second-hand machinery for sale (2,405)

Condition: ready for operation (used), Year of construction: 2022, operating hours: 200 h, Functionality: fully functional, load capacity: 120 kg, arm reach: 2,701 mm, TECHNICAL DETAILS Maximum reach: 2,701 mm Nominal load capacity: 120 kg Maximum load capacity: 167 kg Maximum additional load carousel / swing arm / arm: 300 kg / 130 kg / 150 kg Position repeatability (ISO 9283): ±0.05 mm Number of axes: 6 Control system: KR C4 Range of movement A1: ±185° A2: -140° / -5° A3: -120° / 168° A4: ±350° A5: ±125° A6: ±350° Speed at nominal load A1: 120°/s A2: 115°/s A3: 120°/s A4: 190°/s A5: 180°/s A6: 260°/s MACHINE DETAILS Installation position: Floor Installation area: 754 mm x 754 mm Weight: approx. 1,069 kg Running time: approx. 120 h - 200 h (pre-acceptance, no active use) Network cable length: 10 m Power supply: AS13 134 CTR PNT EPS AIR AIR GDN Ambient temperature during operation: 0 °C to 55 °C (273 K to 328 K) Protection class (IEC 60529): IP65 Degree of protection for robot hand (IEC 60529): IP65 / IP67 EQUIPMENT - KR C4 basic enclosure Djljvi Igfon Idlujcg - Drive configuration SC6.1 - Special paint finish for control cabinet (color: RAL 7035 light grey) - Labeling set de/en KR C4 - Double-bit cabinet lock - Mains supply HAN6 - Power supply XFMRless 400V - CSP Standard 2x USB 3.0 - Safety interface X11 - Kuka WorkVisual - Kuka PLCProConOS4-1 4.1 - SmartPAD holder - SmartPAD - Connecting cable set X20 (15 m) - BUS-smartPAD cable (10 m) - Axis limitation A1 20°

Condition: good (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 122009984, travel distance X-axis: 3,850 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 280 mm, rotational speed (max.): 24,000 rpm, number of slots in tool magazine: 8, No reserve price - guaranteed sale at the highest bid! For milling, drilling and thread cutting work on aluminum, PVC and thin-walled steel profiles for applications in window, facade and metal construction! CONDITION Spindle: New bearings Frequency converter: Recently replaced Tool change: Automatic tool change requires a new sensor - little effort TECHNICAL DETAILS Areas of application: Aluminum, PVC and steel processing Software/control: PC-based EluCam software Processing area X-axis travel: 3,850 mm Y-axis travel: 350 mm Z-axis travel: 280 mm Dceln Idlovyg Szoueg Feed rates (rapid traverse) X-axis: 60 m/min Y-axis: 30 m/min Z-axis: 30 m/min Spindle Power: 7 kW Max. speed: 24,000 rpm Tool holder: HSK-F63 angle head (as new, hardly used) Tool changer Type: Automatic tool changer Places: 8 Vices Number: 12 pneumatic double vices Safety equipment Included: light barrier and safety fence MACHINE DETAILS Machine weight: approx. 2,000 kg Dimensions: approx. 5.1 x 3.4 x 2.6 m

Condition: ready for operation (used), Year of construction: 2003, operating hours: 60,457 h, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Siemens SINUMERIK 840 D Powerline, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 560 mm Z-axis: 560 mm Control: Siemens SINUMERIK 840 D Powerline Rapid traverse speed: 60 m/min Spindle system Speed range: 1 - 15,000 rpm Tool holder: HSK-A 63 Internal coolant supply: Form AD with vacuum rotation filter VRF 250/1250 Tool changer & magazine Tool magazine: Plate Capacity: 90 places NC rotary table & pallets NC rotary table: 360,000 x 0.001° Number of pallets: 2 Pallet size: 400 x 500 mm (similar to DIN 55201-A2) Cooling system & chip handling Cooling lubricant system: Tank capacity 500 L High pressure pump: 60 bar / 19 l/min (pressure levels adjustable via H addresses) Dcslnov E Ibns Idlueg Coolant temperature control: Yes Measuring probe: RENISHAW MP 10 MACHINE DETAILS Operating hours: 60,457 h Switch-on time: 120,080 h EQUIPMENT - Additional control panel at the loading station of the tool magazine with LCD display, 5 soft keys and numeric keypad - Drill breakage control (via laser) with basic software, if breakage is detected the machine stops. - Pallet changer with energy supply (hydraulic workpiece clamping) - Pressure adjustment on the NC rotary table (50 - 240 bar) - High-pressure cooling with pressure increase to 60 bar - 3D path control - Speed increase through look-ahead technology & dynamic pre-control - Sludge cart for sludge removers - Special pallet similar to HDM with 50 mm hole grid and 2-way energy connection

Condition: ready for operation (used), Year of construction: 1996, operating hours: 78,796 h, Functionality: fully functional, machine/vehicle number: 11602, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN TNC 426, TECHNICAL DETAILS Travel paths (X/Y/Z): 600 x 450 x 500 mm Table size: 900 x 520 mm Max. table load: 450 kg Djln Iev Diycodluecg Control: HEIDENHAIN TNC 426 Speed range: 20 - 6,300 rpm Tool holder: SK40 Drive power: 8.6 kW MACHINE DETAILS Machine dimensions (LxWxH): approx. 2.95 x 2.20 x 2.30 m Space requirement (LxW): approx. 4.55 x 3.60 m Total weight: approx. 4,900 kg Operating voltage: 400 V/3 ~50 Hz

Condition: like new (used), Year of construction: 2018, operating hours: 3,920 h, Functionality: fully functional, machine/vehicle number: VT-FA-IQ80-71, type of input current: three-phase, cutting width (max.): 1,800 mm, cutting height (max.): 80 mm, TECHNICAL DETAILS Cutting height (max.): 80 mm Cutting width (max.): 1,800 mm Dcelnowh R Hde Idlusg MACHINE DETAILS Input power type: three-phase

Condition: reconditioned (used), Year of construction: 1996, Functionality: fully functional, turning length: 1,250 mm, spindle diameter: 90 mm, number of slots in tool magazine: 24, Recently renewed (January 2024): Guides Z2 / Z4 / X2; Ball screws Z2 / X2 / Z4; Cable and hoses of the drag chains for Z2 / X2 / Z4 TECHNICAL DETAILS Turning length: 1,250 mm Spindle clearance HSP/GSP: 90 / 90 mm Spindle nose HSP/GSP: taper no. 8 Dslnjvitznj Idlujcg C-axis HSP/GSP: yes (C4) / yes (C3) Turret 1 Axes: XYZB Stations / of which driven: 12 / 6 Additional milling spindle: Capto C4 with automatic tool changer for 6 tools Turret 2 Axes: XZ Stations / of which driven: 12 / 6 Coolant system Type: Knoll system with paper belt filter Low pressure: 8 bar High pressure: max. 80 bar EQUIPMENT - 2x Hainbuch 65 chuck - Numerous turning and drilling attachments with CDI interface - Mechanical steady rest for mounting on turret - Numerous driven tools CDI-Capto C4 radial and axial - Numerous fixed holders CDI-Capto C4 radial and axial

Condition: good (used), Year of construction: 2006, operating hours: 10,000 h, Functionality: fully functional, turning diameter: 310 mm, spindle speed (max.): 4,500 rpm, controller manufacturer: FANUC, TECHNICAL DETAILS Control: FANUC Max. spindle speed: 4,500 rpm Tool turret: 12-way Tailstock: available EQUIPMENT Parts catcher: with box Chip conveyor: available Dcsln Idlovyh Haeujg Chuck: Schunk wedge bar chuck Interface: bar loader interface

Condition: reconditioned (used), Year of construction: 1988, Functionality: fully functional, center height: 180 mm, workpiece weight (max.): 250 kg, center width: 650 mm, grinding wheel diameter: 400 mm, spindle speed (max.): 450 rpm, spindle speed (min.): 30 rpm, TECHNICAL DETAILS Grinding process: external grinding, internal grinding Center distance: 650 mm Center height: 180 mm Workpiece weight: 70 kg flying, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece and tailstock data Workpiece spindle: MK 4, Speed: 30 to 450 rpm Swivel range: 0 - 90° Dcelev Hrixen Idlujg Tailstock: MK 4, quill stroke 45 mm Quill force: 200 - 600 N Table inclination: 10° Movement and adjustment ranges Adjustment path of feed spindle: 80 mm Rapid traverse path: 50 mm Coarse adjustment of air cushion: 280 mm Drives and motors Grinding spindle motor outside: 4 kW Grinding spindle motor inside: 2.2 kW Workpiece spindle motor: 0.55 kW MACHINE DETAILS Weight: 3600 kg EQUIPMENT - Machine completely repaired and checked + painting work - DC motor - Fully automatic work cycle with feed movement via wind rose switch for rapid forward, rapid reverse, grinding operation, feed stop and µm feed - Automatic longitudinal grinding cycle - Central coolant supply for all grinding points - Workpiece headstock with continuously adjustable drive with rotating and lockable spindle - Feed control for longitudinal grinding and plunge grinding with input for retrieval, feed amounts, feeds, spark-out times and idle strokes - Air cushion-supported adjustment of the grinding headstock

Condition: good (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Siemens 840D Powerline, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 700 mm Z-axis: 600 mm C-axis swivel angle: 360° Control type: Siemens 840D Powerline Spindle system Spindle speed: 18,000 rpm Tool holder: HSK-A 63 (according to DIN 69893) Tool changer & magazine Tool changing device: Horizontal Magazine type: Chain magazine Capacity: 120 tool positions NC rotary table & pallets Pallet carrier: Integrated Number of pallets: 3 x (530 mm x 500 mm) Cooling system & measuring technology Coolant tank: 500 L IKZ: Form AD Measuring probe: Heidenhain TS 641 (infrared) Tool measurement: Blum Laser (tool length & diameter measurement horizontal/vertical) MACHINE DETAILS Machine dimensions (LxWxH): 4,500 x 2,300 x 2,790 mm Total weight of the machine: 8.2 t Transport dimensions: 2.9 x 2.6 x 2.3 m Transport weight: 6.5 t Deln Isv E Hz Hedluecg Tool magazine: 1,300 kg (240 x 190 x 220 cm) Chip conveyor: 540 kg (440 x 60 x 170 cm) Cooling lubricant system: 950 kg (220 x 140 x 220 cm) EQUIPMENT - B-axis available - Automatic swivel milling head - Rotating pallet changer - 3D path control - Hydraulic connection for clamping hydraulics on the pallet (pipe screw connection 2 x G1/4") - Pallet and program management ("LPC") for Siemens 840 CPL - Software adaptation for pressure level control (40-240 bar in the work area, max. 150 bar at the setup station) - E-Plan & documentation in German

Year of construction: 2016, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 64938, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Working area: 1,300 x 1,600 mm Processing speed: max. 100 m/min Rotation (C-axis): 4 s⁻¹ Feed axis (Z-axis): 5 m/min Positioning accuracy: ± 0.1 mm / 1,000 mm Repeatability: ± 0.02 mm Table compensation without: ± 0.2 mm Table compensation active: ± 0.03 mm Universal tool module Stroke of the feed axis: max. 30 mm Free passage under bridge: 25 mm Pressure force of the tools: max. 400 N Chip extraction Manufacturer: WAP Type designation: ATTIX 30-11 PC Connection voltage: 230 V Drive power: 1.5 kW Max. negative pressure inlet: 25,000 Pa Max. air flow: 3,700 l/min Number of filter elements: 1 Dcsln Idjvmqq Uslueg Filter material: PET Filter cleaning: manual Weight: 10 kg Dust container capacity: 30 l Dimensions: 450 x 380 x 595 mm Tool units Drawing tools: Quick-change tool types for gas pressure leads, plotter pens and fiber tips Fixed cutting tools: Tangentially controlled tools for standard knives Oscillating cutting tools: Stroke 3 mm up to max. 6,000 strokes/min Grooving tools: For grooving wheels and grooving skids 3D milling unit: High-frequency spindle with 5,000 to max. 40,000 rpm Camera unit: Resolution 752 x 480 pixels MACHINE DETAILS Weight: 460 kg Dimensions: 2,629 x 1,860 mm Height: 1,179 mm Connection value: 4.1 kVA EQUIPMENT - Robust cutting module with extensive customization options - Drawing tool - High frequency spindle - Camera unit - Active table compensation system for precise machining - Manual - Circuit diagrams

Condition: like new (used), Year of construction: 2019, operating hours: 720 h, Functionality: fully functional, machine/vehicle number: D4D194801, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 720 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Maximum faceplate diameter: 200 mm Maximum chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed settings: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck - 5 x B25/120 quick-change tool holders Dceln Idjv Iqm Sjlusg - Tool set - Fixed center MT 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Condition: good (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 551739, feed length X-axis: 384 mm, feed length Y-axis: 317 mm, feed length Z-axis: 217 mm, grinding wheel diameter: 203 mm, rotational speed (max.): 10,000 rpm, Tool grinder with grinding wheel changer and Fanuc automation FastLoad FastLoad loading system Special feature: Fully contained in the machine casing Area of application: Automation solution for low production volumes Access: Operator access from the front of the machine Grip set: One set for the entire diameter range Space requirement: Does not increase the machine footprint TECHNICAL DETAILS Peak power grinding spindle: 9.5 kW Directly driven grinding spindle: yes Speed: 10,000 rpm Number of numerically controlled axes: 5 Grinding wheel diameter: 203.5 mm Grinding wheel changer: 2 slots Axes X-axis: 384 mm Y-axis: 317 mm Z-axis: 217 mm C-axis: 230° A-axis: 360° A-axis rotation: 600 rpm Tool handling Suitable tool diameter: Ø2 - 20 mm Tool length range: 30 - 150 mm Charging time: 20 seconds Number of tools Ø2 mm: 153 Number of tools Ø12 mm: 36 Measurement and tool control Dcelnjv Ednqj Idlujg Measuring probe mounted on the grinding head: yes Measurement of the tool profile: directly on the machine without removing the tool MACHINE DETAILS Machine base made of polymer concrete: yes Installation dimensions: 1,930 x 2,190 x 2,015 mm Machine weight: 4,500 kg Connected load: 14.5 kVA EQUIPMENT - Measuring probe on the grinding head - Possibility of direct tool profile measurement - Machine base made of polymer concrete

Condition: refurbished (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 27578101, travel distance X-axis: 600 mm, travel distance Y-axis: 250 mm, controller model: SIEMENS 840C, number of slots in tool magazine: 90, HIGHLIGHTS - Machine with Promot portal loader - completely overhauled 10 years ago TECHNICAL DATA Control: SIEMENS 840C Tool magazine: 90 places Equipment: turret and sub-spindle Dcjln Isvygxhodlusg

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 40 h, Functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 130 mm, workpiece weight (max.): 1,800 kg, rotational speed (max.): 24,000 rpm, HIGHLIGHTS - Robust, fast and versatile machining center - Precision thanks to powerful CNC control and servo motors - Automatic alignment TECHNICAL DETAILS Area of application: Processing many types of materials with great precision X-axis feed length: 3,200 mm Y-axis feed length: 1,550 mm Z-axis feed length: 130 mm X-axis feed speed: 50 m/min Y-axis feed speed: 50 m/min Z-axis feed speed: 15 m/min Workpiece capacity Max. workpiece weight: 1,800 kg Max. workpiece height: 120 mm Drilling depth: 77 mm Spindle Spindle motor power: 9,000 W Speed (min.): 500 rpm Speed (max.): 24,000 rpm Dust extraction Tap nozzle diameter: 150 mm Warranty Warranty period: 12 months MACHINE DETAILS Doln Idovu A Egsluscg Overall length: 16,000 mm Overall width: 3,100 mm Overall height: 2,100 mm Electrical specifications Input current: three-phase Input frequency: 50 Hz Air and pressure Air pressure: 6 bar Pressure: 6 bar Vacuum pump Power: 5,500 W EQUIPMENT - Powerful CNC control - Automatic alignment

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, turning length: 900 mm, rotational speed (max.): 5,000 rpm, controller model: Siemenes 840D, Equipment: chip conveyor, TECHNICAL DATA Control: Siemens 840D Main spindle speed: 5000 rpm Subspindle speed: 5000 rpm Center distance: 900 mm Travel paths Turret slide 1 (XYZ): 165 / 420 mm, Y: +50 / -30 mm Turret slide 2 (XYZ): 165 / 420 mm Turret slide 3 (XYZ): 165 / 640 mm Dceln Isv E Hk Isdluog Turret system Number of turrets: 3 Tool holder: VDI30 Number of driven tools: 12 ATC MACHINE DETAILS Total weight: 10,500 kg EQUIPMENT - Y-axis - Driven tools - Chip conveyor - Top XF 375 bar loader (BX06121026), built in 2007 Tools and clamping devices are not included

Condition: like new (used), Year of construction: 2021, operating hours: 470 h, Functionality: fully functional, machine/vehicle number: D4D210301, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 460 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Dsln Idov Iqlzjluocg Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed levels: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, internally and externally stepped) - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting-off)

Condition: excellent (used), Year of construction: 2006, operating hours: 8,582 h, Functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 510 mm, controller model: FANUC 21iMB mit Manual Guide i, coolant supply: 20 bar, Equipment: chip conveyor, TECHNICAL DETAILS Machine type: VICTOR VC70 milling machine Control: FANUC 21iMB with Manual Guide i Travel path X: 700 mm Travel path Y: 480 mm Travel path Z: 510 mm Spindle speed: 8,000 rpm IKZ (internal coolant supply): 20 bar Tool holder: SK40 Tool magazine: 24 spaces MACHINE DETAILS Part counter: 34,294 pieces Control switch-on time: 54,559 h Program run: 8,582 h Feed time: 11,150 h EQUIPMENT - INDUNORM automation cabinet - Chip conveyor Deln Idevygpmeluecg

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, feed length X-axis: 3,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 50 mm, workpiece weight (max.): 25 kg, rotational speed (max.): 3,200 rpm, HIGHLIGHTS - High precision, flexibility and production capacity - Easy maintenance and reduced consumption - Configurable machine with selectable solutions TECHNICAL DETAILS Area of application: Production of custom-made kitchens and furniture Functions: Drilling, channel cutting, milling, squaring of panels Panel size Maximum panel size (X, Y, Z): 3,000 x 800 x 50 mm Minimum panel size (X, Y, Z): 250 x 100 x 10 mm Maximum panel weight: 25 kg Speed Maximum shaft speed (with pannello): 25 m/min Maximum shaft speed (normal): 40 m/min Dcslnjvu Azuj Idlueg Spindles Horizontal spindles TH1 and TH2 (X axis): No. 2 double Horizontal spindle TH3 (Y axis): No. 1 double Vertical spindles (Z axis): No. 9 (4X, 5J) Spindle intermediate axis: 32 mm Spool speed: 3,200 rpm Electro-spindle tool change: manual Knife unit Integrated knife unit (X-axis): No. 1, fixed position Blade diameter: 100 mm Sheet thickness: 3 mm Blade speed: 5,700 rpm Power Motor power (spindles and knives): 2 kW Total power: 3 kW Dust collection Dust collection nozzle diameter: 160 mm Compressed air Air pressure: 6 bar Air consumption: 750 m³/h Panel processing Panel handling: with gripper Processing options: sub-panels and through-panels Automation Degree of automation: fully automatic Maintenance: automatic shaft lubrication MACHINE DETAILS Overall dimensions (L x W x H): 1,820 x 1,990 x 1,780 mm Net weight: 950 kg Standards: in accordance with CE regulations EQUIPMENT - Plate handling with gripper - Automatic axis lubrication - Integrated knife unit

Condition: like new (used), Year of construction: 2019, operating hours: 520 h, Functionality: fully functional, machine/vehicle number: F3M194801, feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, controller model: Heidenhain ND7000, The machine was used for training purposes and has only approximately 520 spindle hours. TECHNICAL DETAILS Horizontal longitudinal feed (X): 300 mm Horizontal transverse feed (Y): 200 mm Vertical table feed (Z): 350 mm Fixed angle table Clamping surface (L x W): 600 x 200 mm Width/number of T-slots: 12 x 21 mm / 4 pieces Permissible workpiece weight: max. 50 kg Horizontal milling spindle (behind vertical milling head) Tool holder: DIN 2080 SK 30 Mechanical speed settings: 8 Speed range: 80 - 2,200 rpm Distance to table surface: 80 - 430 mm Vertical milling head Tool holder: DIN 2080 SK 30 Quill stroke: 45 mm Pivoting vertical milling head: ± 90° Mechanical speed settings: 8 Speed range: 80 - 2,200 rpm Distance to table surface: 35 - 385 mm Dcsln Isv Iqbcedluog MACHINE DETAILS Spindle hours: approx. 520 h Dimensions: 1,410 x 1,150 x 1,550 mm Weight: 500 kg EQUIPMENT - Pivoting vertical milling head ± 90° - Tool radius correction - Vice and collets - Drill chuck and parallel supports

Condition: like new (used), Year of construction: 2016, operating hours: 290 h, Functionality: fully functional, machine/vehicle number: F1F 161101, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, rotational speed (max.): 14,000 rpm, Milling machine including engraving spindle and 4th axis, as well as automation setup! The machine was used for training purposes and has only approximately 290 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Dcjlnov Ip Izo Idlusg Milling spindle drive: Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg Spindle hours: 290 h EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic handwheel - Swivel table with keyboard extension - Pneumatic vise 72 mm - 4th axis with three-jaw chuck - Engraving spindle unit (4:1 ratio) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and union nut - Pneumatic automatic door and clamping device - I/O expansion board, robotics and DNC interface - Comprehensive tool set for operation, operating manual with spare parts list

Condition: like new (used), Year of construction: 2020, operating hours: 70 h, Functionality: fully functional, machine/vehicle number: F1F 204605, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, Machine is prepared for automation! The machine was used for training purposes and has only approximately 70 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Doln Idev Ip Aleluocg Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without tool changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Spindle hours: approx. 70 h Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic Handwheel - Swivel table with keyboard extension - I/O expansion board, robotics and DNC interface - Comprehensive tool kit for operation, operating instructions with spare parts list

Condition: like new (used), Year of construction: 2011, operating hours: 400 h, Functionality: fully functional, machine/vehicle number: 6BE1AZ2661, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, swivel angle A-axis (min.): -100 °, swivel angle A-axis (max.): 100 °, The machine was used for training purposes and has only approximately 400 spindle hours. TECHNICAL DETAILS X-axis: 600 mm Y-axis: 500 mm Z-axis: 500 mm B-axis swivel range: ± 100° A/B-axis speed: 22 / 16 rpm X/Y/Z rapid traverse: 24 m/min Control: Heidenhain TNC 426 Mill Worktable Clamping area: 700 x 520 mm Tolerance: 5 T-slots with 18 mm Load capacity: 500 kg Spindle Speed range: 50 - 12,000 rpm Drive power: 11 kW Tool changer Tool magazine: 20-station Change mechanism: Automatic double-arm quick changer with Tool length adjustment device Dcelsv Ipnhon Idluog Tool holder: SK 40 with directional logic (DIN 69871) Tool diameter: 80 / 125 mm Tool length: 250 mm Tool weight: 8 kg MACHINE DETAILS Spindle hours: approx. 400 h Dimensions: 2,040 x 2,445 x 2,920 mm Weight: 4 t Air pressure: 6 bar EQUIPMENT - Win3D View simulation - 5th-axis rotary swivel unit, built in 2013 - Electronic handwheel - Coolant system (internal coolant supply possible) - Comprehensive tool set for operation - Tool cabinet with 66 tool holders - Center-clamp vise and three-jaw chuck - Tool blow-out device - Cover including chip protection door - Leveling elements - 3 pieces

Condition: like new (used), Year of construction: 2016, operating hours: 180 h, Functionality: fully functional, machine/vehicle number: A6D160702, turning diameter: 60 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 60 mm, travel distance Z-axis: 280 mm, turning diameter over bed slide: 130 mm, bar passage: 15 mm, Machine is prepared for automation! The machine was used for training purposes and has only approximately 180 spindle hours. TECHNICAL DETAILS Travel in X / Z: 60 / 280 mm Bar capacity: 15 mm Turning diameter: 60 mm Part length with tailstock: 60 mm Dcsln Idlov Ipbuousg Swing diameter over bed: 130 mm Tool cross-section for external machining: 12 x 12 mm Tool cross-section for internal machining: Ø 10 mm Rapid traverse speed: 3 m/min Working feed: 0 - 2 m/min Max. feed force: 1,000 N Main spindle Max. speed: 300 - 4,200 rpm Spindle connection: EMCO Max. drive power: 1.1 kW Max. torque: 10 Nm Tailstock & turret Quill stroke: 35 mm Number of tool positions: 8 MACHINE DETAILS Spindle hours: 180 h Dimensions (L x W x H): 895 x 745 x 550 mm Machine weight: 150 kg Control: Win NC Siemens Sinumerik Operate EQUIPMENT - EMCO Win 3D-View Simulation - Portable machine control panel - Workbench converted into a machine base with swivel table - Electronic handwheel - Optical tool presetter - Tailstock - Pneumatic chuck - Automatic door - I/O expansion board for robotics and DNC interface

Condition: excellent (used), Year of construction: 2020, operating hours: 60 h, Functionality: fully functional, machine/vehicle number: A6D204605, turning diameter: 60 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 60 mm, travel distance Z-axis: 280 mm, bar passage: 15 mm, The machine was used for training purposes and has only approximately 60 spindle hours. Deln Idlsv In Nkeuscg TECHNICAL DETAILS Travel in X / Z: 60 / 280 mm Bar capacity: 15 mm Turning diameter: 60 mm Part length with tailstock: 60 mm Swing diameter over bed: 130 mm Tool cross-section for external machining: 12 x 12 mm Tool cross-section for internal machining: Ø 10 mm Rapid traverse speed: 3 m/min Working feed: 0 - 2 m/min Max. feed force: 1,000 N Main spindle Max. speed: 300 - 4,200 rpm Spindle connection: EMCO Max. drive power: 1.1 kW Max. torque: 10 Nm Tailstock & turret Quill stroke: 35 mm Number of tool positions: 8 MACHINE DETAILS Spindle hours: approx. 60 h Dimensions (L x W x H): 895 x 745 x 550 mm Machine weight: 150 kg Control: Win NC Siemens Sinumerik Operate EQUIPMENT - EMCO Win 3D-View Simulation - Portable machine control panel - Workbench converted into a machine base with swivel table - Electronic handwheel - Chuck

Condition: like new (used), Year of construction: 2015, operating hours: 272 h, Functionality: fully functional, machine/vehicle number: S4E150081, turning length: 510 mm, turning diameter over cross slide: 300 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, Machine with C-axis, driven tools, and bar feeder! The machine was used for training purposes and has only 272 spindle hours. TECHNICAL DETAILS Swing diameter over bed: Ø 430 mm Swing diameter over cross slide: Ø 300 mm Max. turning length: 510 mm Control: Siemens Sinumerik Operate Travel range Travel in X: 160 mm Travel in Z: 510 mm C-axis: 360° Main spindle Draw tube inner diameter / spindle bore: Ø 45 mm / Ø 53 mm Speed range: 0 - 6,300 rpm Spindle torque: 78 Nm Spindle bearing (inner diameter): Ø 80 mm Drive power: 8 / 13 kW Tool changer Dcoln Idlov Imzfsuog Number of tool positions: 12 Spindle shank: VDI 30 Tool cross-section for Square tools: 20 x 20 mm Shank diameter for boring bars: Ø 32 mm Number of driven tools: 6 Torque: 16 Nm Drive power: 4 kW Drives Rapid traverse speed X / Z: 24 / 30 m/min Rapid traverse speed C: 250 rpm Feed force in the X-axis: 4,000 N Feed force in the Z-axis: 6,000 N Positioning range Ps (according to VDI 3441) X / Z: 0.003 / 0.003 mm Tailstock Tailstock travel: 510 mm Max. contact force: 6,000 N Internal taper for holding the live center: MK 4 MACHINE DETAILS Spindle hours: 272 h Height of the rotary axis above floor: 1,100 mm Machine height: 1,958 mm Machine footprint (W x D): 2,275 x 1,790 mm Total weight: 3,300 kg Coolant system: 250 l Pump output at 3.5 bar: 0.57 kW Flow rate at 3.5 / 1 bar: 15 / 65 l/min EQUIPMENT - Programmable tailstock - emco LM800 bar loader - Hollow clamping cylinder including draw tube - Machine light - Coolant system - Electronic handwheel - Cleaning gun/Multiflow - Pneumatically automatic parts catcher - Fully automatic machine door - Chip conveyor - Extensive tool set - Three-jaw chuck