Second-hand machinery for sale (2,405)

Condition: ready for operation (used), Year of construction: 2022, operating hours: 200 h, Functionality: fully functional, load capacity: 120 kg, arm reach: 2,701 mm, TECHNICAL DETAILS Maximum reach: 2,701 mm Nominal load capacity: 120 kg Maximum load capacity: 167 kg Maximum additional load carousel / swing arm / arm: 300 kg / 130 kg / 150 kg Position repeatability (ISO 9283): ±0.05 mm Number of axes: 6 Control system: KR C4 Dob Ejvi Igfs Ry Snjcg Range of movement A1: ±185° A2: -140° / -5° A3: -120° / 168° A4: ±350° A5: ±125° A6: ±350° Speed at nominal load A1: 120°/s A2: 115°/s A3: 120°/s A4: 190°/s A5: 180°/s A6: 260°/s MACHINE DETAILS Installation position: Floor Installation area: 754 mm x 754 mm Weight: approx. 1,069 kg Running time: approx. 120 h - 200 h (pre-acceptance, no active use) Network cable length: 10 m Power supply: AS13 134 CTR PNT EPS AIR AIR GDN Ambient temperature during operation: 0 °C to 55 °C (273 K to 328 K) Protection class (IEC 60529): IP65 Degree of protection for robot hand (IEC 60529): IP65 / IP67 EQUIPMENT - KR C4 basic enclosure - Drive configuration SC6.1 - Special paint finish for control cabinet (color: RAL 7035 light grey) - Labeling set de/en KR C4 - Double-bit cabinet lock - Mains supply HAN6 - Power supply XFMRless 400V - CSP Standard 2x USB 3.0 - Safety interface X11 - Kuka WorkVisual - Kuka PLCProConOS4-1 4.1 - SmartPAD holder - SmartPAD - Connecting cable set X20 (15 m) - BUS-smartPAD cable (10 m) - Axis limitation A1 20°

Condition: good (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 122009984, travel distance X-axis: 3,850 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 280 mm, rotational speed (max.): 24,000 rpm, number of slots in tool magazine: 8, No reserve price - guaranteed sale at the highest bid! For milling, drilling and thread cutting work on aluminum, PVC and thin-walled steel profiles for applications in window, facade and metal construction! CONDITION Spindle: New bearings Frequency converter: Recently replaced Tool change: Automatic tool change requires a new sensor - little effort TECHNICAL DETAILS Areas of application: Aluminum, PVC and steel processing Software/control: PC-based EluCam software Processing area Dcjb Eovyg Szj Ry Sneg X-axis travel: 3,850 mm Y-axis travel: 350 mm Z-axis travel: 280 mm Feed rates (rapid traverse) X-axis: 60 m/min Y-axis: 30 m/min Z-axis: 30 m/min Spindle Power: 7 kW Max. speed: 24,000 rpm Tool holder: HSK-F63 angle head (as new, hardly used) Tool changer Type: Automatic tool changer Places: 8 Vices Number: 12 pneumatic double vices Safety equipment Included: light barrier and safety fence MACHINE DETAILS Machine weight: approx. 2,000 kg Dimensions: approx. 5.1 x 3.4 x 2.6 m

Condition: ready for operation (used), Year of construction: 2003, operating hours: 60,457 h, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Siemens SINUMERIK 840 D Powerline, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 560 mm Z-axis: 560 mm Control: Siemens SINUMERIK 840 D Powerline Rapid traverse speed: 60 m/min Spindle system Speed range: 1 - 15,000 rpm Tool holder: HSK-A 63 Internal coolant supply: Form AD with vacuum rotation filter VRF 250/1250 Tool changer & magazine Tool magazine: Plate Capacity: 90 places NC rotary table & pallets NC rotary table: 360,000 x 0.001° Number of pallets: 2 Pallet size: 400 x 500 mm (similar to DIN 55201-A2) Cooling system & chip handling Cooling lubricant system: Tank capacity 500 L High pressure pump: 60 bar / 19 l/min (pressure levels adjustable via H addresses) Coolant temperature control: Yes Measuring probe: RENISHAW MP 10 MACHINE DETAILS Djb E Ryjv E Ibno Snocg Operating hours: 60,457 h Switch-on time: 120,080 h EQUIPMENT - Additional control panel at the loading station of the tool magazine with LCD display, 5 soft keys and numeric keypad - Drill breakage control (via laser) with basic software, if breakage is detected the machine stops. - Pallet changer with energy supply (hydraulic workpiece clamping) - Pressure adjustment on the NC rotary table (50 - 240 bar) - High-pressure cooling with pressure increase to 60 bar - 3D path control - Speed increase through look-ahead technology & dynamic pre-control - Sludge cart for sludge removers - Special pallet similar to HDM with 50 mm hole grid and 2-way energy connection

Condition: ready for operation (used), Year of construction: 1996, operating hours: 78,796 h, Functionality: fully functional, machine/vehicle number: 11602, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN TNC 426, TECHNICAL DETAILS Travel paths (X/Y/Z): 600 x 450 x 500 mm Table size: 900 x 520 mm Max. table load: 450 kg Control: HEIDENHAIN TNC 426 Speed range: 20 - 6,300 rpm Tool holder: SK40 Drive power: 8.6 kW MACHINE DETAILS Machine dimensions (LxWxH): approx. 2.95 x 2.20 x 2.30 m Space requirement (LxW): approx. 4.55 x 3.60 m Total weight: approx. 4,900 kg Dcjbev Diyce E Ry Snog Operating voltage: 400 V/3 ~50 Hz

Condition: like new (used), Year of construction: 2018, operating hours: 3,920 h, Functionality: fully functional, machine/vehicle number: VT-FA-IQ80-71, type of input current: three-phase, cutting width (max.): 1,800 mm, cutting height (max.): 80 mm, TECHNICAL DETAILS Cutting height (max.): 80 mm Cutting width (max.): 1,800 mm MACHINE DETAILS Input power type: three-phase Dcsb E Rowh R Hdoy Sneg

Condition: reconditioned (used), Year of construction: 1996, Functionality: fully functional, turning length: 1,250 mm, spindle diameter: 90 mm, number of slots in tool magazine: 24, Recently renewed (January 2024): Guides Z2 / Z4 / X2; Ball screws Z2 / X2 / Z4; Cable and hoses of the drag chains for Z2 / X2 / Z4 TECHNICAL DETAILS Turning length: 1,250 mm Spindle clearance HSP/GSP: 90 / 90 mm Spindle nose HSP/GSP: taper no. 8 C-axis HSP/GSP: yes (C4) / yes (C3) Turret 1 Axes: XYZB Stations / of which driven: 12 / 6 Additional milling spindle: Capto C4 with automatic tool changer for 6 tools Turret 2 Axes: XZ Stations / of which driven: 12 / 6 Coolant system Type: Knoll system with paper belt filter Low pressure: 8 bar High pressure: max. 80 bar Dceb Esvitznj Ry Sneg EQUIPMENT - 2x Hainbuch 65 chuck - Numerous turning and drilling attachments with CDI interface - Mechanical steady rest for mounting on turret - Numerous driven tools CDI-Capto C4 radial and axial - Numerous fixed holders CDI-Capto C4 radial and axial

Condition: good (used), Year of construction: 2006, operating hours: 10,000 h, Functionality: fully functional, turning diameter: 310 mm, spindle speed (max.): 4,500 rpm, controller manufacturer: FANUC, TECHNICAL DETAILS Control: FANUC Max. spindle speed: 4,500 rpm Tool turret: 12-way Tailstock: available EQUIPMENT Parts catcher: with box Chip conveyor: available Dob E Ryjvyh Hae Snecg Chuck: Schunk wedge bar chuck Interface: bar loader interface

Condition: reconditioned (used), Year of construction: 1988, Functionality: fully functional, center height: 180 mm, workpiece weight (max.): 250 kg, center width: 650 mm, grinding wheel diameter: 400 mm, spindle speed (max.): 450 rpm, spindle speed (min.): 30 rpm, TECHNICAL DETAILS Grinding process: external grinding, internal grinding Center distance: 650 mm Center height: 180 mm Workpiece weight: 70 kg flying, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece and tailstock data Workpiece spindle: MK 4, Speed: 30 to 450 rpm Swivel range: 0 - 90° Tailstock: MK 4, quill stroke 45 mm Quill force: 200 - 600 N Table inclination: 10° Movement and adjustment ranges Adjustment path of feed spindle: 80 mm Rapid traverse path: 50 mm Coarse adjustment of air cushion: 280 mm Drives and motors Grinding spindle motor outside: 4 kW Grinding spindle motor inside: 2.2 kW Workpiece spindle motor: 0.55 kW MACHINE DETAILS Weight: 3600 kg EQUIPMENT Dceb E Ryjv Hrixs Snog - Machine completely repaired and checked + painting work - DC motor - Fully automatic work cycle with feed movement via wind rose switch for rapid forward, rapid reverse, grinding operation, feed stop and µm feed - Automatic longitudinal grinding cycle - Central coolant supply for all grinding points - Workpiece headstock with continuously adjustable drive with rotating and lockable spindle - Feed control for longitudinal grinding and plunge grinding with input for retrieval, feed amounts, feeds, spark-out times and idle strokes - Air cushion-supported adjustment of the grinding headstock

Condition: good (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Siemens 840D Powerline, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 700 mm Z-axis: 600 mm C-axis swivel angle: 360° Control type: Siemens 840D Powerline Spindle system Spindle speed: 18,000 rpm Tool holder: HSK-A 63 (according to DIN 69893) Tool changer & magazine Tool changing device: Horizontal Magazine type: Chain magazine Capacity: 120 tool positions Djb Eov E Hz Hj Ry Snocg NC rotary table & pallets Pallet carrier: Integrated Number of pallets: 3 x (530 mm x 500 mm) Cooling system & measuring technology Coolant tank: 500 L IKZ: Form AD Measuring probe: Heidenhain TS 641 (infrared) Tool measurement: Blum Laser (tool length & diameter measurement horizontal/vertical) MACHINE DETAILS Machine dimensions (LxWxH): 4,500 x 2,300 x 2,790 mm Total weight of the machine: 8.2 t Transport dimensions: 2.9 x 2.6 x 2.3 m Transport weight: 6.5 t Tool magazine: 1,300 kg (240 x 190 x 220 cm) Chip conveyor: 540 kg (440 x 60 x 170 cm) Cooling lubricant system: 950 kg (220 x 140 x 220 cm) EQUIPMENT - B-axis available - Automatic swivel milling head - Rotating pallet changer - 3D path control - Hydraulic connection for clamping hydraulics on the pallet (pipe screw connection 2 x G1/4") - Pallet and program management ("LPC") for Siemens 840 CPL - Software adaptation for pressure level control (40-240 bar in the work area, max. 150 bar at the setup station) - E-Plan & documentation in German

Year of construction: 2016, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 64938, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Working area: 1,300 x 1,600 mm Processing speed: max. 100 m/min Rotation (C-axis): 4 s⁻¹ Feed axis (Z-axis): 5 m/min Positioning accuracy: ± 0.1 mm / 1,000 mm Repeatability: ± 0.02 mm Table compensation without: ± 0.2 mm Table compensation active: ± 0.03 mm Universal tool module Stroke of the feed axis: max. 30 mm Free passage under bridge: 25 mm Pressure force of the tools: max. 400 N Chip extraction Manufacturer: WAP Type designation: ATTIX 30-11 PC Connection voltage: 230 V Drive power: 1.5 kW Max. negative pressure inlet: 25,000 Pa Max. air flow: 3,700 l/min Number of filter elements: 1 Filter material: PET Filter cleaning: manual Weight: 10 kg Dust container capacity: 30 l Dimensions: 450 x 380 x 595 mm Tool units Drawing tools: Quick-change tool types for gas pressure leads, plotter pens and fiber tips Fixed cutting tools: Tangentially controlled tools for standard knives Oscillating cutting tools: Stroke 3 mm up to max. 6,000 strokes/min Grooving tools: For grooving wheels and grooving skids 3D milling unit: High-frequency spindle with 5,000 to max. 40,000 rpm Camera unit: Resolution 752 x 480 pixels MACHINE DETAILS Dob Eovmqq Ue Ry Snocg Weight: 460 kg Dimensions: 2,629 x 1,860 mm Height: 1,179 mm Connection value: 4.1 kVA EQUIPMENT - Robust cutting module with extensive customization options - Drawing tool - High frequency spindle - Camera unit - Active table compensation system for precise machining - Manual - Circuit diagrams

Condition: like new (used), Year of construction: 2019, operating hours: 720 h, Functionality: fully functional, machine/vehicle number: D4D194801, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 720 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Djb E Ryjv Iqm Se Snecg Swing diameter over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Maximum faceplate diameter: 200 mm Maximum chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed settings: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Condition: good (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 551739, feed length X-axis: 384 mm, feed length Y-axis: 317 mm, feed length Z-axis: 217 mm, grinding wheel diameter: 203 mm, rotational speed (max.): 10,000 rpm, Tool grinder with grinding wheel changer and Fanuc automation FastLoad FastLoad loading system Special feature: Fully contained in the machine casing Area of application: Automation solution for low production volumes Access: Operator access from the front of the machine Grip set: One set for the entire diameter range Space requirement: Does not increase the machine footprint TECHNICAL DETAILS Peak power grinding spindle: 9.5 kW Directly driven grinding spindle: yes Speed: 10,000 rpm Number of numerically controlled axes: 5 Grinding wheel diameter: 203.5 mm Grinding wheel changer: 2 slots Axes X-axis: 384 mm Dcebsv Ednqs E Ry Snjg Y-axis: 317 mm Z-axis: 217 mm C-axis: 230° A-axis: 360° A-axis rotation: 600 rpm Tool handling Suitable tool diameter: Ø2 - 20 mm Tool length range: 30 - 150 mm Charging time: 20 seconds Number of tools Ø2 mm: 153 Number of tools Ø12 mm: 36 Measurement and tool control Measuring probe mounted on the grinding head: yes Measurement of the tool profile: directly on the machine without removing the tool MACHINE DETAILS Machine base made of polymer concrete: yes Installation dimensions: 1,930 x 2,190 x 2,015 mm Machine weight: 4,500 kg Connected load: 14.5 kVA EQUIPMENT - Measuring probe on the grinding head - Possibility of direct tool profile measurement - Machine base made of polymer concrete

Condition: refurbished (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 27578101, travel distance X-axis: 600 mm, travel distance Y-axis: 250 mm, controller model: SIEMENS 840C, number of slots in tool magazine: 90, HIGHLIGHTS - Machine with Promot portal loader - completely overhauled 10 years ago TECHNICAL DATA Control: SIEMENS 840C Dcebovygxhs E Ry Sneg Tool magazine: 90 places Equipment: turret and sub-spindle

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 40 h, Functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 130 mm, workpiece weight (max.): 1,800 kg, rotational speed (max.): 24,000 rpm, HIGHLIGHTS - Robust, fast and versatile machining center - Precision thanks to powerful CNC control and servo motors - Automatic alignment TECHNICAL DETAILS Area of application: Processing many types of materials with great precision X-axis feed length: 3,200 mm Y-axis feed length: 1,550 mm Z-axis feed length: 130 mm X-axis feed speed: 50 m/min Y-axis feed speed: 50 m/min Z-axis feed speed: 15 m/min Workpiece capacity Max. workpiece weight: 1,800 kg Max. workpiece height: 120 mm Drilling depth: 77 mm Spindle Spindle motor power: 9,000 W Speed (min.): 500 rpm Speed (max.): 24,000 rpm Dust extraction Tap nozzle diameter: 150 mm Warranty Warranty period: 12 months MACHINE DETAILS Overall length: 16,000 mm Overall width: 3,100 mm Overall height: 2,100 mm Electrical specifications Dcsb E Rjvu A Egoy Snsg Input current: three-phase Input frequency: 50 Hz Air and pressure Air pressure: 6 bar Pressure: 6 bar Vacuum pump Power: 5,500 W EQUIPMENT - Powerful CNC control - Automatic alignment

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, turning length: 900 mm, rotational speed (max.): 5,000 rpm, controller model: Siemenes 840D, Equipment: chip conveyor, TECHNICAL DATA Control: Siemens 840D Main spindle speed: 5000 rpm Subspindle speed: 5000 rpm Center distance: 900 mm Travel paths Turret slide 1 (XYZ): 165 / 420 mm, Y: +50 / -30 mm Turret slide 2 (XYZ): 165 / 420 mm Turret slide 3 (XYZ): 165 / 640 mm Turret system Number of turrets: 3 Tool holder: VDI30 Number of driven tools: 12 ATC MACHINE DETAILS Total weight: 10,500 kg EQUIPMENT Dcsb Esv E Hk Ij Ry Snog - Y-axis - Driven tools - Chip conveyor - Top XF 375 bar loader (BX06121026), built in 2007 Tools and clamping devices are not included

Condition: like new (used), Year of construction: 2021, operating hours: 470 h, Functionality: fully functional, machine/vehicle number: D4D210301, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 460 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Djb E Ry Sev Iqlzjnjcg Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed levels: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, internally and externally stepped) - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting-off)

Condition: excellent (used), Year of construction: 2006, operating hours: 8,582 h, Functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 510 mm, controller model: FANUC 21iMB mit Manual Guide i, coolant supply: 20 bar, Equipment: chip conveyor, TECHNICAL DETAILS Machine type: VICTOR VC70 milling machine Control: FANUC 21iMB with Manual Guide i Travel path X: 700 mm Travel path Y: 480 mm Travel path Z: 510 mm Spindle speed: 8,000 rpm IKZ (internal coolant supply): 20 bar Tool holder: SK40 Tool magazine: 24 spaces MACHINE DETAILS Part counter: 34,294 pieces Control switch-on time: 54,559 h Dcobevygpmj E Ry Snsg Program run: 8,582 h Feed time: 11,150 h EQUIPMENT - INDUNORM automation cabinet - Chip conveyor

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, feed length X-axis: 3,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 50 mm, workpiece weight (max.): 25 kg, rotational speed (max.): 3,200 rpm, HIGHLIGHTS - High precision, flexibility and production capacity - Easy maintenance and reduced consumption - Configurable machine with selectable solutions TECHNICAL DETAILS Area of application: Production of custom-made kitchens and furniture Functions: Drilling, channel cutting, milling, squaring of panels Panel size Maximum panel size (X, Y, Z): 3,000 x 800 x 50 mm Minimum panel size (X, Y, Z): 250 x 100 x 10 mm Maximum panel weight: 25 kg Speed Maximum shaft speed (with pannello): 25 m/min Maximum shaft speed (normal): 40 m/min Spindles Horizontal spindles TH1 and TH2 (X axis): No. 2 double Horizontal spindle TH3 (Y axis): No. 1 double Vertical spindles (Z axis): No. 9 (4X, 5J) Spindle intermediate axis: 32 mm Spool speed: 3,200 rpm Electro-spindle tool change: manual Knife unit Integrated knife unit (X-axis): No. 1, fixed position Blade diameter: 100 mm Sheet thickness: 3 mm Blade speed: 5,700 rpm Power Motor power (spindles and knives): 2 kW Total power: 3 kW Dcjb E Rsvu Azuoy Sneg Dust collection Dust collection nozzle diameter: 160 mm Compressed air Air pressure: 6 bar Air consumption: 750 m³/h Panel processing Panel handling: with gripper Processing options: sub-panels and through-panels Automation Degree of automation: fully automatic Maintenance: automatic shaft lubrication MACHINE DETAILS Overall dimensions (L x W x H): 1,820 x 1,990 x 1,780 mm Net weight: 950 kg Standards: in accordance with CE regulations EQUIPMENT - Plate handling with gripper - Automatic axis lubrication - Integrated knife unit

Condition: like new (used), Year of construction: 2019, operating hours: 520 h, Functionality: fully functional, machine/vehicle number: F3M194801, feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, controller model: Heidenhain ND7000, The machine was used for training purposes and has only approximately 520 spindle hours. TECHNICAL DETAILS Horizontal longitudinal feed (X): 300 mm Horizontal transverse feed (Y): 200 mm Vertical table feed (Z): 350 mm Fixed angle table Clamping surface (L x W): 600 x 200 mm Width/number of T-slots: 12 x 21 mm / 4 pieces Permissible workpiece weight: max. 50 kg Horizontal milling spindle (behind vertical milling head) Tool holder: DIN 2080 SK 30 Mechanical speed settings: 8 Speed range: 80 - 2,200 rpm Distance to table surface: 80 - 430 mm Vertical milling head Tool holder: DIN 2080 SK 30 Quill stroke: 45 mm Dsb E Ry Sov Iqbcsnscg Pivoting vertical milling head: ± 90° Mechanical speed settings: 8 Speed range: 80 - 2,200 rpm Distance to table surface: 35 - 385 mm MACHINE DETAILS Spindle hours: approx. 520 h Dimensions: 1,410 x 1,150 x 1,550 mm Weight: 500 kg EQUIPMENT - Pivoting vertical milling head ± 90° - Tool radius correction - Vice and collets - Drill chuck and parallel supports

Condition: like new (used), Year of construction: 2016, operating hours: 290 h, Functionality: fully functional, machine/vehicle number: F1F 161101, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, rotational speed (max.): 14,000 rpm, Milling machine including engraving spindle and 4th axis, as well as automation setup! Dcob E Ry Sov Ip Izjnog The machine was used for training purposes and has only approximately 290 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive: Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg Spindle hours: 290 h EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic handwheel - Swivel table with keyboard extension - Pneumatic vise 72 mm - 4th axis with three-jaw chuck - Engraving spindle unit (4:1 ratio) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and union nut - Pneumatic automatic door and clamping device - I/O expansion board, robotics and DNC interface - Comprehensive tool set for operation, operating manual with spare parts list

Condition: like new (used), Year of construction: 2020, operating hours: 70 h, Functionality: fully functional, machine/vehicle number: F1F 204605, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, Machine is prepared for automation! The machine was used for training purposes and has only approximately 70 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without tool changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm Dcjbjv Ip Ale E Ry Sneg MACHINE DETAILS Spindle hours: approx. 70 h Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic Handwheel - Swivel table with keyboard extension - I/O expansion board, robotics and DNC interface - Comprehensive tool kit for operation, operating instructions with spare parts list

Condition: like new (used), Year of construction: 2011, operating hours: 400 h, Functionality: fully functional, machine/vehicle number: 6BE1AZ2661, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, swivel angle A-axis (min.): -100 °, swivel angle A-axis (max.): 100 °, The machine was used for training purposes and has only approximately 400 spindle hours. TECHNICAL DETAILS X-axis: 600 mm Y-axis: 500 mm Z-axis: 500 mm B-axis swivel range: ± 100° A/B-axis speed: 22 / 16 rpm X/Y/Z rapid traverse: 24 m/min Control: Heidenhain TNC 426 Mill Worktable Clamping area: 700 x 520 mm Tolerance: 5 T-slots with 18 mm Load capacity: 500 kg Spindle Speed range: 50 - 12,000 rpm Drive power: 11 kW Tool changer Tool magazine: 20-station Change mechanism: Automatic double-arm quick changer with Tool length adjustment device Tool holder: SK 40 with directional logic (DIN 69871) Tool diameter: 80 / 125 mm Tool length: 250 mm Tool weight: 8 kg MACHINE DETAILS Spindle hours: approx. 400 h Dimensions: 2,040 x 2,445 x 2,920 mm Weight: 4 t Air pressure: 6 bar EQUIPMENT - Win3D View simulation - 5th-axis rotary swivel unit, built in 2013 - Electronic handwheel - Coolant system (internal coolant supply possible) - Comprehensive tool set for operation - Tool cabinet with 66 tool holders - Center-clamp vise and three-jaw chuck - Tool blow-out device - Cover including chip protection door - Leveling elements - 3 pieces Dceb E Rysv Ipnhj Sneg

Condition: like new (used), Year of construction: 2016, operating hours: 180 h, Functionality: fully functional, machine/vehicle number: A6D160702, turning diameter: 60 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 60 mm, travel distance Z-axis: 280 mm, turning diameter over bed slide: 130 mm, bar passage: 15 mm, Machine is prepared for automation! The machine was used for training purposes and has only approximately 180 spindle hours. TECHNICAL DETAILS Travel in X / Z: 60 / 280 mm Bar capacity: 15 mm Turning diameter: 60 mm Part length with tailstock: 60 mm Swing diameter over bed: 130 mm Tool cross-section for external machining: 12 x 12 mm Tool cross-section for internal machining: Ø 10 mm Dceb E Ry Ssv Ipbuonsg Rapid traverse speed: 3 m/min Working feed: 0 - 2 m/min Max. feed force: 1,000 N Main spindle Max. speed: 300 - 4,200 rpm Spindle connection: EMCO Max. drive power: 1.1 kW Max. torque: 10 Nm Tailstock & turret Quill stroke: 35 mm Number of tool positions: 8 MACHINE DETAILS Spindle hours: 180 h Dimensions (L x W x H): 895 x 745 x 550 mm Machine weight: 150 kg Control: Win NC Siemens Sinumerik Operate EQUIPMENT - EMCO Win 3D-View Simulation - Portable machine control panel - Workbench converted into a machine base with swivel table - Electronic handwheel - Optical tool presetter - Tailstock - Pneumatic chuck - Automatic door - I/O expansion board for robotics and DNC interface

Condition: excellent (used), Year of construction: 2020, operating hours: 60 h, Functionality: fully functional, machine/vehicle number: A6D204605, turning diameter: 60 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 60 mm, travel distance Z-axis: 280 mm, bar passage: 15 mm, The machine was used for training purposes and has only approximately 60 spindle hours. Dceb E Rysv In Nkj Snsg TECHNICAL DETAILS Travel in X / Z: 60 / 280 mm Bar capacity: 15 mm Turning diameter: 60 mm Part length with tailstock: 60 mm Swing diameter over bed: 130 mm Tool cross-section for external machining: 12 x 12 mm Tool cross-section for internal machining: Ø 10 mm Rapid traverse speed: 3 m/min Working feed: 0 - 2 m/min Max. feed force: 1,000 N Main spindle Max. speed: 300 - 4,200 rpm Spindle connection: EMCO Max. drive power: 1.1 kW Max. torque: 10 Nm Tailstock & turret Quill stroke: 35 mm Number of tool positions: 8 MACHINE DETAILS Spindle hours: approx. 60 h Dimensions (L x W x H): 895 x 745 x 550 mm Machine weight: 150 kg Control: Win NC Siemens Sinumerik Operate EQUIPMENT - EMCO Win 3D-View Simulation - Portable machine control panel - Workbench converted into a machine base with swivel table - Electronic handwheel - Chuck

Condition: like new (used), Year of construction: 2015, operating hours: 272 h, Functionality: fully functional, machine/vehicle number: S4E150081, turning length: 510 mm, turning diameter over cross slide: 300 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, Machine with C-axis, driven tools, and bar feeder! The machine was used for training purposes and has only 272 spindle hours. TECHNICAL DETAILS Swing diameter over bed: Ø 430 mm Swing diameter over cross slide: Ø 300 mm Max. turning length: 510 mm Control: Siemens Sinumerik Operate Travel range Travel in X: 160 mm Travel in Z: 510 mm C-axis: 360° Main spindle Draw tube inner diameter / spindle bore: Ø 45 mm / Ø 53 mm Speed range: 0 - 6,300 rpm Spindle torque: 78 Nm Spindle bearing (inner diameter): Ø 80 mm Drive power: 8 / 13 kW Dobsv Imzfo E Ry Snocg Tool changer Number of tool positions: 12 Spindle shank: VDI 30 Tool cross-section for Square tools: 20 x 20 mm Shank diameter for boring bars: Ø 32 mm Number of driven tools: 6 Torque: 16 Nm Drive power: 4 kW Drives Rapid traverse speed X / Z: 24 / 30 m/min Rapid traverse speed C: 250 rpm Feed force in the X-axis: 4,000 N Feed force in the Z-axis: 6,000 N Positioning range Ps (according to VDI 3441) X / Z: 0.003 / 0.003 mm Tailstock Tailstock travel: 510 mm Max. contact force: 6,000 N Internal taper for holding the live center: MK 4 MACHINE DETAILS Spindle hours: 272 h Height of the rotary axis above floor: 1,100 mm Machine height: 1,958 mm Machine footprint (W x D): 2,275 x 1,790 mm Total weight: 3,300 kg Coolant system: 250 l Pump output at 3.5 bar: 0.57 kW Flow rate at 3.5 / 1 bar: 15 / 65 l/min EQUIPMENT - Programmable tailstock - emco LM800 bar loader - Hollow clamping cylinder including draw tube - Machine light - Coolant system - Electronic handwheel - Cleaning gun/Multiflow - Pneumatically automatic parts catcher - Fully automatic machine door - Chip conveyor - Extensive tool set - Three-jaw chuck