Second-hand machinery for sale (2,399)

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 250028, power: 250 kW (339.91 HP), pressure (min.): 4 bar, pressure (max.): 13.5 bar, The pneumatic container is used to provide oil-free, dry compressed air for test equipment. TECHNICAL DETAILS Maximum air flow: 42.83 m³/min Pressure range: 4 - 13.5 bar Oil-free compressed air capacity: 42 m³/min at max. 7.5 bar Drive Motor power: 250 kW System structure Compressor: EKO 250 D Refrigeration dryer: HHDp 4500 / HF 5-M/5 Fgj Ia T Ntov Rdltj Dsb Activated carbon adsorber: BEKO Clearpoint L 3400 V Post-filter: HF 6-60 Oil-water separator: BEKO Öwamat 16 Electric condensate drain: BEKO 14 MACHINE DETAILS Compressor unit: 4,000 x 2,100 x 2,500 mm Overall dimensions (L x W x H): 13,000 x 2,950 x 2,900mm Total weight: 20,000 kg

Condition: good (used), Year of construction: 2005, Functionality: fully functional, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 100 mm, workpiece spindle speed (max.): 90,000 rpm, controller model: Bosch Rexroth MTX, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Area of application: Hard machining Control: Bosch Rexroth MTX Working area Axes: 6 axes X1,Z1, X2 & Z2: Hydrostatic axes B1: Workpiece spindle P01: Internal loader Dimensions working area: 200 x 200 x 100 mm Spindle & tools Number of work spindles: 1 (1x internal grinding, 1x external grinding) Number of tools: 2 Tool holder: External wheel max. Ø500 mm, internal wheel for high frequency spindle Speeds Workpiece: max. 1,375 rpm External grinding wheel: max. 1,375 rpm Internal grinding wheel: max. 90,000 rpm (high frequency spindle) MACHINE DETAILS Machine dimensions (LxWxH): 3.9 x 2.7 x 2.62 m Machine weight: 6,050 kg EQUIPMENT - Part handling: Manual or with Baumann loader - Exhaust air: Extraction system from LOSMA - Units: Hydraulic and hydrostatic oil supply Fs Ia Tsv E Rkre Nt Djgb - Cooling unit for hydrostatics and high-frequency spindle

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 390 mm, table load: 350 kg, rotational speed (max.): 8,000 rpm, tool diameter: 100 mm, Placing a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS Control: Fagor 8055 X-axis: 760 mm Y-axis: 430 mm Z-axis: 390 mm Max. rapid traverse: 24 m/min Spindle motor Continuous power: 5.7 kW Continuous power (1 hour): 7.5 kW Max. speed: 8,000 rpm Work table Dimensions: 900 x 410 mm Max. load: 350 kg Tool handling Max. tool length: 200 mm Max. tool diameter: 100 mm Max. tool diameter with free adjacent positions: 130 mm Max. tool weight: 8 kg Fge Ia T Njv Ifl Net Dsb Tool change time: 10 s Max. number of tools: 16 MACHINE DETAILS Length: 2.2 m Width: 2.0 m Height: 2.4 m Weight: 3,000 kg Connected load: 15 kVA No additional tools or clamping devices are included.

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, turning length: 1,500 mm, turning diameter over bed slide: 475 mm, rotational speed (max.): 4,500 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,680 mm, Placing a bid obliges you to pick up the item on time by March 31, 2025! Fj Ia T Nev Ifw Set Degb TECHNICAL DETAILS Control: Fagor CNC 8055 Turning diameter over recess: 710 mm Turning diameter over cross slide: 240 mm Turning diameter over bed: 475 mm Max. turning length (with turret): 1,500 mm Spindle Bar capacity: 51 mm Recess of spindle nose: 248 mm Spindle nose: ASA D1-6 Spindle bore: 65 mm Speed range: 100 - 4,500 rpm Spindle power: 11 kW Max. torque: 29.3 kgm Tool handling Tool positions: 8 Square tool shaft height: 25 mm Shaft diameter for boring bar: 40 mm Tool holder: VDI 30 Indexing time: 0.42 s Travel paths X-axis: 260 mm Z-axis: 1,680 mm Rapid traverse speeds Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 15 m/min Tailstock Max. workpiece weight (with tailstock): 1,500 kg Tailstock quill taper: MK 5 Quill range: 150 m Quill diameter: 80 mm Quill taper: MK 5 Bed width: 355 mm X-axis motor: 7.3 Nm Z-axis motor: 11.9 Nm Chuck dimensions: 200/4,000 mm MACHINE DETAILS Dimensions (L x W x H): 3,520 x 1,935 x 2,022 mm Weight: 3,150 kg Foundation: 2,920 x 2,055 mm No additional tools or clamping devices included.

Condition: good (used), Year of construction: 2000, operating hours: 21,900 h, Functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 495 mm, table width: 1,230 mm, table length: 410 mm, TECHNICAL DETAILS X-travel: 700 mm Y-travel: 315 mm Z-travel: 495 mm Quill travel: 180 mm Control: Heidenhain TNC 426 4th axis: available Table clamping area: 1,230 x 410 mm Tool holder: SK 30 MACHINE DETAILS Total power requirement: 20 kW Machine weight: approx. 3.2 t Operating hours: 66,200 h Fgj Iev Du E Dja T Nt Dsb Spindle hours: 21,900 h EQUIPMENT - Renishaw measuring probe Tools, clamping devices and accessories are only part of the scope of delivery if they are listed under EQUIPMENT.

Condition: used, Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 17037, travel distance X-axis: 1,050 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,160 mm, workpiece weight (max.): 1,000 kg, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 240, No reserve price - guaranteed sale at the highest bid! Incl. refurbished second spare spindle and refurbished drive motor. Machine with rotary pallet storage and extended tool magazine! TECHNICAL DETAILS X-axis: 1,050 mm Y-axis: 1,000 mm Z-axis: 1,160 mm Distance from spindle front edge to workpiece carrier center: min. 190 mm Distance from spindle center to workpiece carrier top edge: min. 100 mm Fge Ia Tov Ai Uwj Nt Dob Spindle Speed range: 50 - 10,000 rpm Motor power (40% duty cycle): 31 kW Motor power (100% duty cycle): 19 kW Torque (40% duty cycle): 200 Nm Torque (100% duty cycle): 165 Nm Spindle mount: SK-50 Tools Chip-to-chip time (at rapid traverse 40 m/min): 8 s Tool diameter (with free neighboring positions): 250 mm Tool diameter (with occupied neighboring positions): 125 mm Tool length: 800 mm Tool mass: 35 kg Total mass of all tools in the storage: approx. 720 kg Number of tool positions: 240 Measuring system Type: Linear, optical-incremental, distance-coded Accuracy class: ±5 µm Division period of the grating division: 20 µm Input and display unit: 1 µm Pallets Clamping surface: 630 x 630 mm Loading mass per pallet (at rapid traverse 40 m/min): 1,000 kg Permissible moment with off-center load: 750 Nm Directional bore diameter: 25 H6 Hole distance to table center: 200 ± 0.013 mm Fastening thread: 23 x M16 Workpiece clearance height: 1,200 mm Maximum interference circle: Ø1,100 mm (flattened) Automatic pallet change Number of changeable pallets: 2 + 4 pallets in the circular storage Pallet change time (for standard version): 12 s Pallet change time (for version with clamping hydraulics at least): 14 s MACHINE DETAILS Dimensions: 8,200 x 4,400 x 3,600 mm Weight: 18 t Connection power: 75 kVA Temperature range: 10 - 35 °C Sound pressure level: < 80 dBA

Condition: ready for operation (used), Year of construction: 2003, operating hours: 8,810 h, Functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS X-travel: 640 mm Y-travel: 600 mm Z-travel: 500 mm Control: SIEMENS 810D powerline Spindle speed: 12,000 rpm Table dimensions: 850 x 630 mm Table load: max. 600 kg Tool magazine: 30 positions MACHINE DETAILS Total power requirement: 42 kW Machine weight: approx. 6.5 t Space required: approx. 3.50 x 3.30 x 3.60 m On-time: 52,248 h Spindle hours: 8,810 h EQUIPMENT - BLUM tool breakage/measurement system - Electronic handwheel - 3 leveling elements Fgs Iaev Rdbus T Nt Dob - Chip conveyor - Interlit SPB coolant/belt filter system 3/600

Condition: not inspected (used), Year of construction: 2006, overall weight: 1,270 kg, arm reach: 2,655 mm, controller manufacturer: FANUC LTD, type of input current: AC, We offer you, Two six-axis industrial robots R-2000iA/210F with two R-J3IB controllers manufactured in 2006 by the Japanese manufacturer FANUC. Industrial robots R-2000iA/210F: Range and dimensions: - maximum range: 2655mm; - robot height: 2850mm; - working range: *axis 1 ±360° *axis 2 ±135° *axis 3 ±166° *axis 4 ±360° *axis 5 ±125° *axis 6 ±360° Load capacity and precision: - maximum load capacity: 210kg; - repeatability: ±0.2mm; - axis speeds: *axis 1 100°/s *axis 2 90°/s axis 3 95°/s *axis 4 120°/s *axis 5 120°/s *axis 6 190°/s Power and energy consumption: - drive power: 5.4kW; - supply voltage: 380-575V AC, 50/60Hz; - power consumption: average 5kVA; Operating environment: - operating temperature: 0°C to 45°C; - humidity: maximum relative humidity 95% (non-condensing); - degree of protection: IP54 (robot body), IP67 (wrist); Fe Ia T Ntev Ewkfo Dsgb - robot weight: 1270kg; Control and software: - controller: R-J3iB, R-30iA (depending on configuration) - user interface: Pendant Teach (programming console) - communication options: Ethernet, DeviceNet, Profibus, Profinet, EtherCAT, Modbus R-J3IB controllers: Technical parameters: - weight: 180kg - voltage: 380-415/440-500VAC - frequency: 50/60Hz - number of phases: 3 - rated power: 12kVA

Condition: ready for operation (used), Year of construction: 2007, operating hours: 8,000 h, Functionality: fully functional, machine/vehicle number: 20907, feed length X-axis: 380 mm, feed length Y-axis: 280 mm, feed length Z-axis: 280 mm, swivel angle A-axis (max.): 360 °, swivel angle C-axis (max.): 340 °, Spindle replaced about 6 years ago - only 8,000 spindle hours! TECHNICAL DETAILS Control: Fanuc GE 160 i Length: 950 mm Width: 310 mm T-slots: 3 x 14 mm Grinding head, grinding spindle Spindle type: Motorized swiveling Drive power: 7.5 kW Speed range: 0 - 9,000 rpm Wheel mount: HSK 50 Wheel diameter: 50 - 200 mm Max. number of wheels: 6 Axes Travel X / Y / Z: 380 / 280 / 280 mm Rapid traverse X / Y / Z: 20 / 20 / 10 m/min Resolution X / Y / Z: 0.0001 mm Drive power X / Y / Z: 1.0 kW, 3 Nm C-axis swivel angle: 340° Rapid traverse: 66°/s Resolution: 0.001° Drive power: 1.0 kW, 3 Nm Fge Ijv Iptqoa T Nt Dsb Rotational axis A: continuous Rapid traverse: 167°/s Resolution: 0.001° Drive power: 0.5 kW, 2 Nm Mounting taper: ISO 50 Spindle height: 210 mm MACHINE DETAILS Width: 1,590 mm Depth: 1,930 mm Height: 2,250 mm Weight: 5,500 kg Noise level: < 70 dB(A) according to DIN 45 635 Operating hours: 30,000 h Power supply Motor power: 7.5 kW Connected load: 33 kVA Voltage: 3 x 400 V AC Hydraulics Type: DMR 300 Principle: Gear pump Drive: Electric motor Voltage: 3 x 230/400 V Filling volume: 11 L Pendulum volume: 4 L Flow rate: 2.8 L/min Operating pressure: max. 98 bar Pneumatics Type: CFG 301 Machine air consumption: approx. 2,000 l/h Measuring system air consumption: approx. 3,000 l/h Air consumption: approx. 1,000 l/h Fire extinguishing system: yes Working pressure: 6 bar Maintenance: Maintenance-free, except for the filters Air quality: according to DIN ISO 8573-1 Central lubrication Type: CFG 012 Principle: Gear pump Drive: Electric motor Tank capacity: 30 bar Pressure limitation: 0.2 l/h Flow rate: 0.2 l/h Ambient temperature: +10°C to +40°C Protection class: IP 54

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller model: Matsuura G-Tech 30i, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -220 °, swivel angle B-axis (max.): 220 °, TECHNICAL DETAILS X-axis: 550 mm Y-axis: 410 mm Z-axis: 450 mm B-axis: ±220° C-axis: 360° CNC control: Matsuura G-Tech 30i Fgs Iaev Rb Hhe T Nt Djb Spindle and tool Speed range: 20,000 rpm Tool holder: BT40 Tool length: 300 mm Tool diameter: 150 mm Tool weight: 10 kg Workpiece capacity Workpiece diameter: 300 mm Workpiece weight: 40 kg MACHINE DETAILS Machine dimensions (W x H x D): 3,032 × 5,120 × 2,705 mm Power consumption: 32 kVA EQUIPMENT - Internal cooling system - Automatic pallet changer - Automatic Tool changer - High-pressure cooling 20 bar - Chip conveyor - FSE chip control

Condition: good (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 122009984, travel distance X-axis: 3,850 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 280 mm, rotational speed (max.): 24,000 rpm, number of slots in tool magazine: 8, No reserve price - guaranteed sale at the highest bid! For milling, drilling and thread cutting work on aluminum, PVC and thin-walled steel profiles for applications in window, facade and metal construction! CONDITION Fo Ia Tovyg Sze Nt Dsgb Spindle: New bearings Frequency converter: Recently replaced Tool change: Automatic tool change requires a new sensor - little effort TECHNICAL DETAILS Areas of application: Aluminum, PVC and steel processing Software/control: PC-based EluCam software Processing area X-axis travel: 3,850 mm Y-axis travel: 350 mm Z-axis travel: 280 mm Feed rates (rapid traverse) X-axis: 60 m/min Y-axis: 30 m/min Z-axis: 30 m/min Spindle Power: 7 kW Max. speed: 24,000 rpm Tool holder: HSK-F63 angle head (as new, hardly used) Tool changer Type: Automatic tool changer Places: 8 Vices Number: 12 pneumatic double vices Safety equipment Included: light barrier and safety fence MACHINE DETAILS Machine weight: approx. 2,000 kg Dimensions: approx. 5.1 x 3.4 x 2.6 m

Condition: ready for operation (used), Year of construction: 2022, operating hours: 200 h, Functionality: fully functional, load capacity: 120 kg, arm reach: 2,701 mm, TECHNICAL DETAILS Maximum reach: 2,701 mm Nominal load capacity: 120 kg Maximum load capacity: 167 kg Maximum additional load carousel / swing arm / arm: 300 kg / 130 kg / 150 kg Position repeatability (ISO 9283): ±0.05 mm Number of axes: 6 Control system: KR C4 Range of movement A1: ±185° A2: -140° / -5° A3: -120° / 168° A4: ±350° A5: ±125° A6: ±350° Speed at nominal load A1: 120°/s A2: 115°/s A3: 120°/s A4: 190°/s A5: 180°/s A6: 260°/s MACHINE DETAILS Installation position: Floor Installation area: 754 mm x 754 mm Weight: approx. 1,069 kg Running time: approx. 120 h - 200 h (pre-acceptance, no active use) Network cable length: 10 m Power supply: AS13 134 CTR PNT EPS AIR AIR GDN Ambient temperature during operation: 0 °C to 55 °C (273 K to 328 K) Protection class (IEC 60529): IP65 Degree of protection for robot hand (IEC 60529): IP65 / IP67 EQUIPMENT - KR C4 basic enclosure - Drive configuration SC6.1 - Special paint finish for control cabinet (color: RAL 7035 light grey) - Labeling set de/en KR C4 - Double-bit cabinet lock Fgs Iajvi Igfs T Nt Dob - Mains supply HAN6 - Power supply XFMRless 400V - CSP Standard 2x USB 3.0 - Safety interface X11 - Kuka WorkVisual - Kuka PLCProConOS4-1 4.1 - SmartPAD holder - SmartPAD - Connecting cable set X20 (15 m) - BUS-smartPAD cable (10 m) - Axis limitation A1 20°

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, spindle speed (max.): 110 rpm, module thread tooth pitch (max.): 6, module thread tooth pitch (min.): 1.5, wheel diameter: 275 mm, TECHNICAL DETAILS Max. gear diameter: 275 mm Module range: min. 1.5 / max. 6 Tooth width: 5.5 mm Helix angle: min. 0° / max. 60° Number of teeth: min. 5 / max. 120 Gear ratio: min. 1:1 / max. 1:10 Drive & Control Control: SINUMERIK 840 C Max. workpiece spindle speed: 110 rpm Cutter head speeds: 20 - 110 rpm Total power requirement: 100 kW Machine weight & dimensions Machine weight: approx. 16.7 t Space requirement: approx. 5,200 x 2,300 x 2,400 mm EQUIPMENT - Deburring device U-axis / Q-spindle - Chip conveyor Fe Ia T Nov Rc Sret Dogb - Coolant system - ELBARON electrostatic air cleaner - No tools or workpiece clamping devices

Year of construction: 2020, Condition: not inspected (used), Functionality: unexamined, We offer you, a grinding line with a PS-H PS-H 600X900 knife mill manufactured by PALLMANN. The plastic grinding line is used for maximum recovery of plastics from waste in an automated manner on an industrial scale. Technical parameters: Input material: HDPE, PP EPDM Processing capacity: 1.7-2.1t/h Voltage: 400V Fgs Ia T Nev Ev Tlot Dsb Equipment: -belt conveyor for the PS-H 600x900 F3/SD5 mill hopper; -tunnel metal detector on the hopper conveyor; -knife mill; -pneumatic extraction system; -double BigBag station for collecting regrind; -mechanical screw feeder for transporting regrind; -automatic filter; -control cabinet. Damage of an operational nature was found in the form of scratches and paint chips or slight deformations.

Condition: good (used), Year of construction: 2006, operating hours: 10,000 h, Functionality: fully functional, turning diameter: 310 mm, spindle speed (max.): 4,500 rpm, controller manufacturer: FANUC, TECHNICAL DETAILS Fgo Ia Tovyh Hae Nt Dsb Control: FANUC Max. spindle speed: 4,500 rpm Tool turret: 12-way Tailstock: available EQUIPMENT Parts catcher: with box Chip conveyor: available Chuck: Schunk wedge bar chuck Interface: bar loader interface

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, turning length: 350 mm, turning diameter: 340 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 640 mm, controller model: OSP U 100 L, TECHNICAL DETAILS Max. turning length: 350 mm Max. turning diameter: 340 mm Diameter over bed: 530 mm Diameter over cross slide: 380 mm Distance between centers: 1,000 mm CNC control: OSP U 100 L Travel paths X-axis: 260 mm Z-axis: 640 mm Spindle and drive Spindle mount: VDI 40 Fgs Isv Rbthja T Nt Djb Spindle bore: 62 mm Speed: max. 4,500 rpm Spindle motor power: 22 kW Upper turret: 12 positions, driven Lower turret: fixed tools MACHINE DETAILS Dimensions (L x W x H): 3,970 × 2,100 × 1,932 mm Weight: 4,800 kg

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: R17902436, overall weight: 160 kg, load capacity: 6 kg, arm reach: 1,350 mm, pivoting range: 360 °, TECHNICAL DETAILS Maximum load on the wrist: 6 kg Maximum reach: 1,350 mm Working area Reach: Ø 1,350 mm Height: 500 mm Number of axes: 4 Environment Protection class for mechanics: IP67 (standard) Protection class for wrist and A3 arm: IP67 (standard) Control Type: R-30iB Plus MACHINE DETAILS Electrical voltage: 200-230 V, 3 phases, 50/60 Hz Average power: 2.5 kW Sound power level: 79.2 dB Fge Ia T Ntjv Rcp De Dob Ambient temperature: 0-45 °C EQUIPMENT - Integrated signals on the upper arm: 8x In / Out (stop signal) - Integrated air supply

Year of construction: 2017, Condition: not inspected (used), Functionality: unexamined, We offer you, HI-SCAN 6046si detector manufactured in 2017 by Malaysian manufacturer SMITHS DETECTION. X-ray inspection system designed for security checks of baggage, parcels, or screening of technical products. Physical dimensions: length: 2004mm (79 inches) width: 850mm (33 inches) Fgo Ia T Ntov Ewdxo Dsb Through-hole size: 62 x 45 cm Tape width 53cm X-ray generator: voltage: 160kV; penetration: ability to penetrate steel up to 37mm; detector: high-resolution XADA detector modules; resolution: ability to detect wires up to AWG 41; total weight: 400kg (882 pounds) During the inspection, the machine was disconnected from the power supply - no possibility of testing in operation.

Condition: refurbished (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 27578101, travel distance X-axis: 600 mm, travel distance Y-axis: 250 mm, controller model: SIEMENS 840C, number of slots in tool magazine: 90, HIGHLIGHTS - Machine with Promot portal loader - completely overhauled 10 years ago Fgo Ia Tjvygxho Nt Dsb TECHNICAL DATA Control: SIEMENS 840C Tool magazine: 90 places Equipment: turret and sub-spindle

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 121198, turning length: 1,000 mm, turning diameter: 370 mm, spindle speed (max.): 3,800 rpm, bar passage: 62 mm, controller model: OSP-E 100 L, A Fanuc M-710i robot is also included. General overhaul in 2014 TECHNICAL DATA Turning diameter: 370 mm Turning length: 1,000 mm Bar diameter: 62 mm Control unit: OSP-E 100 L Tailstock taper: MT5 Fo Iaov Rbpps T Nt Degb C-axis: present Spindle and drive Spindle taper: A2-88 Spindle speed: 3,800 rpm Main motor: 22/15 kW Tool speed: 4,500 rpm Motor for driven tools: 3.7 kW Upper turret: 12 positions, driven Lower turret: fixed tools Fanuc robot Model: M-710i Control: R-J2 Year of manufacture: 1997 MACHINE DETAILS Dimensions (L x H x W): 3,900 x 2,050 x 1,950 mm Weight: 6,800 kg Connected load: 30.6 kVA EQUIPMENT - C-axis and two turrets - Various accessories included (see images) - Chuck included Connection cables between the robot and the machine are not included.

Condition: good (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 986003, grinding wheel speed: 6,000 rpm, tool diameter: 230 mm, travel distance X-axis: 325 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 470 mm, TECHNICAL DETAILS max. gear ratio: 10:1 Number of teeth: 3 - 200 Tooth height: 20 mm Tooth width max.: 58 mm Control: SIN 840 D SIEMENS Fgj Iasv Rcn Hs T Nt Djb Axes X-axis: 325 mm Y-axis: 350 mm Z-axis: 470 mm B-axis: +90.1° / -1° Spindle Grinding spindle speeds: continuously variable up to 6,000 rpm Workpiece spindle speed: 1,200 rpm Tool Max. tool diameter: 230 mm Min. tool diameter: 69.85 mm Table diameter: 212.71 mm MACHINE DETAILS Total power requirement: 75 kW Machine weight: approx. 10,000 kg Space requirement: approx. 6.10 m x 4.40 m x 3.30 m Transport dimensions machine: 4 x 2.5 x 2.85 m / 11 t Transport dimensions water tank: 3.55 x 2.41 x 2.5 m / 1.8 t Transport dimensions cooler: 1.5 x 0.8 x 1.1 m / 0.2 t Transport dimensions sheet metal: 2.5 x 1.1 x 0.8 m/ 0.25 t EQUIPMENT - Coolant filter system Hoffmann HSF 100 V

Condition: excellent (used), Year of construction: 2006, operating hours: 8,582 h, Functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 510 mm, controller model: FANUC 21iMB mit Manual Guide i, coolant supply: 20 bar, Equipment: chip conveyor, TECHNICAL DETAILS Fo Ia T Ntovygpme Degb Machine type: VICTOR VC70 milling machine Control: FANUC 21iMB with Manual Guide i Travel path X: 700 mm Travel path Y: 480 mm Travel path Z: 510 mm Spindle speed: 8,000 rpm IKZ (internal coolant supply): 20 bar Tool holder: SK40 Tool magazine: 24 spaces MACHINE DETAILS Part counter: 34,294 pieces Control switch-on time: 54,559 h Program run: 8,582 h Feed time: 11,150 h EQUIPMENT - INDUNORM automation cabinet - Chip conveyor

Condition: good (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 101331, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 5,000 rpm, turning diameter: 140 mm, turning length: 630 mm, TECHNICAL DETAILS Max. turning diameter: 140 mm Chuck swing diameter: Ø 250 mm Turning height: 630 mm Control: SIN840 PL Spindle Spindle speeds: continuously variable 1 - 5,000 rpm Drive power (40% duty cycle): 38.00 kW Spindle head: according to DIN 55026 - size 6 Spindle diameter in the front bearing: 110 mm Axes X-axis travel: 300 mm X-axis feed: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min Fgj Iev Rcnmoa T Nt Deb X-axis feed force: 9,000 N Z-axis travel: 700 mm Z-axis feed: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Feed force Z-axis: 10,000 N Tool turret Number of tools in turret 1: 12 Number of tools in turret 2: 12 Tool holder: VDI 40 DIN 69880 MACHINE DETAILS Total power requirement: 70 kW Machine weight: approx. 25 t Space requirement (L x W x H): approx. 6.8 m x 4.7 m x 4.3 m EQUIPMENT - Chip conveyor - HYFRA spindle air conditioning unit - Knoll coolant system

Condition: good (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 4760, turning diameter over cross slide: 500 mm, feed length X-axis: 740 mm, feed length Z-axis: 450 mm, spindle bore: 130 mm, spindle speed (max.): 710 rpm, spindle speed (min.): 1 rpm, TECHNICAL DETAILS Spindle mount according to DIN 55027: size 15 Spindle bore: 130 mm Spindle diameter in the front bearing: 220 mm Main drive Drive power (100/60% ED): 38/46 kW Speed I: 1 - 250 rpm Max. torque: 6,000 Nm Performance data of the X-axis Travel path X: 740 mm Feed force: 14 kN Speed: 8 m/min Performance data of the Z-axis Travel path Z: 450 mm Feed force: 18 kN Speed: 8 m/min Working area Chest opening: 650 mm Swing diameter of the cheek opening: 1,400 mm Swing diameter of the face slide: 500 mm Turning tool cross-section: 32 mm x 32 mm Workpiece mass faceplate: 21 t Center of gravity distance: 250 mm MACHINE DETAILS Machine weight: 7.4 t Dimensions (L x W x H): 3.7 m x 2.5 m x 2.1 m Electrical data Voltage: 400 V Fs Ia T Ntev Rcl Se Dogb Frequency: 50 Hz

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 10108, grinding wheel diameter: 100 mm, grinding length: 100 mm, center width: 100 mm, grinding spindle speed: 18,000 rpm, spindle speed (max.): 250 rpm, TECHNICAL DETAILS Grinding headstock Feed: X1 axes (CNC-controlled) Feed: Z1 axes (CNC-controlled) Grinding spindle (I) Feed: X2 axes (CNC-controlled) Feed: Z2 axes (CNC-controlled) Grinding spindle (II) Feed: X3 axes (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 12 kW Speed control: with frequency converter Max. speed: 18,000 rpm Balancing: electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel coating width: max. 20 mm Circumferential speed: max. 125 m/s Cam piece Workpiece rotation diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Workpiece spindle Design: fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: oil lubrication Set air pressure: see chapter 5.3.1 Drive: with servo motor, C1 axis (CNC-controlled) Speed max.: 250 rpm Tailstock Longitudinal adjustment: manual via gear Tailstock quill Live center: mounting hole Ø 20 mm Clamping force: adjustable via pneumatics Fs Isv Rck Ija T Nt Djgb Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Grinding stock Design: fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see chapter 5.3.1 Profiling of the grinding wheel Fine dressing: circumference and face with diamond wheel, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 5.3 kW Speed control: with frequency converter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connection power: 87 kVA