Second-hand machinery for sale (2,359)

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, TECHNICAL DETAILS Type: Automatic cutting machine Longitudinal tools: 6 real + 6 virtual (multi-line processing) Cross tool: 1 piece Tool change: Automatic set-up Cardboard box infeed: Combi, suitable for single sheet and continuous cardboard box Web widths side by side: Two web widths can be alternated side by side Working height: 900 mm Zero edge: Left/right freely selectable Control panel: Right Workpiece parameters: Web width infeed: 350 - 1,500 mm Web width side by side: Total max. 1,350 mm Stacking height incl. pallet: 2,150 mm Pitch of continuous material: 1,150 mm Web length outfeed: min. 300 mm Cutting tolerance: Lengthwise: max. 0.5 % Transverse direction: max. ±2.0 mm Quality of the cardboard: Cardboard thickness: 2.0 - 7.0 mm (±0.2 mm) Raw material quality: Up to 2.30 BC according to DIN 55468 Processable cardboard qualities 1-wall: Thickness up to approx. 4 mm Processable cardboard qualities 2-wall: Thickness up to approx. 7 mm Dusbev N Htko Et Tfust Cardboard types: FEFCO0403 Standard / FEFCO0410 Standard / FEFCO0429 Lid outside / FEFCO0900 Single MACHINE DETAILS Weight: approx. 2,000 kg Dimensions (WxDxH): approx. 3,450 x 2,400 x 3,700 mm Operating pressure: 6 bar Air consumption: approx. 20 - 100 NL/min (depending on cycle output and carton type) Operating voltage: 400 V, 50 Hz, 3 Ph./N/PE Connected load: 4.5 kW Rated current: 6.5 A Max. Back-up fuse: 16 A EQUIPMENT - Online database with performance indicator per carton design - Degree of perforation: Adjustable - Offset creasing: Available - Multiline processing: Possible - Carton designs: Rotatable (90° grid) - Carton designs: Mirrorable - Quality Plus Mode: Supported - Control: PLC control according to IEC 61131 - Industrial PC: Available - Operating system: Windows 7 32bit professional (US) - Memory: 1 hard disk permanently installed, 1 hard disk USB for data backup, Network: 2 x Ethernet 100 MBit - Interfaces: The machine is prepared for the use of tapio, for communication for digital products. - Free use: tapio MachineBoard app included (unlimited in time) - Software: IntelliCut machine control - Automatic carton production: According to production list (HOMAG CSV format) - Softkeys: For machine functions - Fault diagnosis: Available - Science program: Included - Display: Control panel with full HD multi-touch display - User interface: Standardized HOMAG user interface - Navigation: Simple, intuitive operation of the machine - Machine data recording MMR basic: For usage-dependent maintenance and display of key production figures (e.g. number of pieces, production time) - Control cabinet integrated in the machine - Machine installed in accordance with European standard EN 60204 - Machines are intended for in-house use

Condition: ready for operation (used), Year of construction: 2011, operating hours: 48,160 h, Functionality: fully functional, machine/vehicle number: 1425-088, spindle speed (max.): 15,000 rpm, turning diameter: 10 mm, quill stroke: 105 mm, Equipment: chip conveyor, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Max. Machining diameter: 10 mm Max. Headstock stroke (standard): 105 mm Drive power of the main spindle: 3.7 kW Speed of the main spindle: 500 - 15,000 rpm Indexing of main spindle: C-axis (standard) Tooling Turning tools: 6 pieces (Ø 8 mm) Drilling tools (4-spindle drilling unit): 4 pieces (ER 11) Cross-machining tools: 3 pieces (ER 11) Dujb Et Tfsvgvxqsuot Max. Speed of tools: 10,000 rpm Counter spindle Max. Pick-up diameter: 10 mm Drive power counter spindle: 1.1 kW Counter spindle speed: 500 - 10,000 rpm Tools for back machining: 4 tools (ER 11) Driven: 2 tools Fixed: 2 tools Speed of the rear tools: 250 - 8,000 rpm Rapid traverse speed: 35 m/min (all axes) MACHINE DETAILS Machine weight: 1,450 kg Dimensions: 1,865 x 775 x 1,695 mm Switch-on time: 68,175 h Processing time: 48,160 h Cutting time: 9,283 h Workpiece counter: 12,950,266 EQUIPMENT - Bar feeder: FMB minimag 20 - HP pump: Büchele SHD 100 with cartridge filter system

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 13676, number of slots in tool magazine: 20, Equipment: chip conveyor, Due to space requirements, the machine is being auctioned without a reserve price - guaranteed sale to the highest bidder! Duebjv Ni A Io Et Tfujt Bidding obligates the buyer to pick up the machine by March 31, 2025! TECHNICAL DETAILS 4th axis: Dividing head mechanically functional, however, the circuit board needs to be replaced Tool changer: 20-station Chip conveyor: Available Filter system: Paper belt filter Operating voltage: 360 - 480 V Further technical data according to the manufacturer - without guarantee X-travel: 1,270 mm Y-travel: 508 mm Z-travel: 635 mm Spindle speed: 8,000 rpm Control: CNC Haas Table length: 1,321 mm Table width: 457 mm Spindle nose to table: 107 - 742 mm Workpiece weight: 793 kg T-slot width: 16 mm T-slot spacing: 80 Number of T-slots: 5 Tool changer: 20 Tool diameter: 89 mm Tool weight: 5.4 kg Spindle taper: CAT 40 Dimensions: 2.8 x 3.0 x 3.2 m Weight: 5.5 t

Condition: ready for operation (used), Year of construction: 1969, Functionality: fully functional, machine/vehicle number: 176, pressing force: 10 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Pressing force: 100 kN Year of conversion: 2018 Djb Etsv Na A Eo Tfusut Overtravel: 12 mm Overtravel time: 80 ms

Condition: excellent (used), Year of construction: 2016, operating hours: 1,356 h, Functionality: fully functional, machine/vehicle number: S4-1527, laser power: 40 W, table length: 610 mm, table width: 1,000 mm, No reserve price - guaranteed sale at the highest bid! Laser tube replaced in 2019 - machine has a total of 1208 hours of engraving and 150 hours of laser hours since 2016. The operating times since the laser tube was replaced are unknown.  TECHNICAL DETAILS Work surface/cutting table: 100 x 61 cm Implementation option: Rear, for products up to 100 cm wide and unlimited length Lenses 1.5-inch lens: Ideal for precise engravings, sharp photo quality 2.5-inch lens: Suitable for engravings with a curve Air and dust management Air-assist with air pump: Reduces dirt on the lenses Additional dust shield: Protects the lenses and mirrors for the 40-watt laser tube Circular engraving module Features: Spring and rubber edges for optimal hold of glasses / Tilting mechanism on both sides for a wide range of engraving options, including elongated vases EQUIPMENT - Grid table with vacuum - Circular feed module - Lenses: 1.5 inches and 2.5 inches - Air-assist with air pump and additional dust shield Dusb Etsvw S Nge Tfust - Circular engraving module

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 153493, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol 640M, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS X-axis travel: 1,660 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Control: Mazatrol 640M Rapid traverse: 30,000 mm/min Spindle Spindle mount: 7/24 taper, No. 40 Speed range: 40 - 10,000 rpm Table Dob Etev Tmlhs Tfuout Table area (right/left): 2,000 mm Table area (forward/backward): 510 mm Number of T-slots: 5 T-slot size (ISO R299): 18 mm T-slot spacing: 100 mm Max. table load: 1,000 kg Distance spindle to table: 180 - 690 mm Table height: 750 mm EQUIPMENT - Spindle cooling

Condition: used, Kramer & Grebe Type WW160 Stainless Steel Meat Grinder. S/No. 280/0277, 160mm Diameter Throat, Loading Device, Tetra Laval Control. (CE Marked) Duob Etswayl Hs Tfust Please Note: These lots are located in Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2007, Condition: ready for operation (used), Functionality: fully functional, screw diameter: 27 mm, machine/vehicle number: DE27688, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Screw diameter: 2 x Ø 27.0 mm L/D ratio: 40D Drive power: 33.6 kW Processable materials: PE, PP, PS, ABS EQUIPMENT - Co-rotating - Segmented screws and cylinders - Atmospheric degassing Dsb Et Tev Dkraefueut - Vacuum degassing including vacuum pump

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, travel distance X-axis: 4,020 mm, travel distance Y-axis: 2,020 mm, travel distance Z-axis: 600 mm, controller model: NUM AXIUM POWER, swivel angle A-axis (min.): -46 °, swivel angle A-axis (max.): 46 °, swivel angle C-axis (max.): 3,600 °, Machine including comprehensive accessories TECHNICAL DETAILS X-axis travel: 4020 mm Y-axis travel: 2020 mm Z-axis travel: 600 mm Support surface X, Y: 4,400 x 2,400 mm Axis angle A, B: ± 46° Rotation axis C: ± 3,600° Repeatability: ± 0.1 mm Positioning speed: 10 m/min Max. machining temperature range: +10°C to +40°C High-pressure pump Design pressure: 420 MPa Operating pressure: max. 400 MPa Continuous operating pressure: max. 380 MPa Flow rate: max. 3.8 l/min Drive power: 37 kW Control & electronics Control: NUM AXIUM POWER Drive system: NUM MDLU 3 Rated motor power: 2 kW Control unit: Rittal PC cabinet with air conditioning unit Control system: Integrated CNC/PLC Measurement system: High-resolution SinCos encoder Software System software: CAD/CAM including 32-bit Windows software Import formats: HPGL, DXF Functions: Automatic approach strategies, jet correction, material database, cutting control, pressure and abrasive control Operating parameters Max. waterjet operating pressure: 4,000 bar Dob Etewbvgis Tfueut MACHINE DETAILS Dimensions (L x W x H): 6,400 x 3,200 x 3,100 mm Machine weight: approx. 10,500 kg Connections Pneumatic connection: min. 6.5 bar Water connection: 2–5 bar Connection values: 400 V AC, 16 A Control voltage: 24 V DC EQUIPMENT - Manual handheld control unit - Double safety light barriers - Abrasive cutting set - Abrasive dosing system with reservoir - Abrasive pressure feed system - Approx. 3 t of cutting sand - Various nozzles, seals, wear and replacement parts

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 1101742, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table width: 900 mm, table length: 400 mm, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS X-axis travel: 762 mm Dusb Ejv Naw Net Tfust Y-axis travel: 406 mm Z-axis travel: 508 mm Table dimensions: approx. 900 x 400 mm EQUIPMENT Tool changer Further information according to manufacturer - without guarantee Spindle speed: 12,000 rpm Tool taper: CT 40 Table load: max. 680 kg Tool diameter: 76 mm Tool slots: 24+1 Machine dimensions: approx. 3.2 x 2.8 x 2.7 m Weight: approx. 3.7 t

Condition: good (used), Year of construction: 2008, operating hours: 23,532 h, Functionality: fully functional, machine/vehicle number: 11760001053, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 480 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, rotational speed (max.): 18,000 rpm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Working area Travel: 450 mm x 400 mm x 480 mm Main drive Motor spindle: 18,000 1/min incl. active cooling Power: 15 kW (40 % ED); 10 kW (100 % ED) 3D control: Heidenhain iTNC 530 Tool holder Type: SK 40 according to DIN 69871 Tool clamping: according to DIN 69872 Equipment Swivel head: controlled NC swivel milling head (B-axis) Tool changer: Pick-up system, 16 magazine positions SK 40 Dsb Et Tou Ra I Iofueut Rotary table: NC rotary table diameter 450 mm Chip conveyor: available Control: 3D path control Switch-on time: 55,916 h Spindle time: 23,532 h See attached technical drawings (linked below). EQUIPMENT Tool changing device Chip conveyor 3D path control

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 120 mm, travel distance W-axis: 450 mm, The machine was recently partially overhauled at a cost of €15,000! The machine features six high-quality grinding motors, a spur motor, and turbines. TECHNICAL DETAILS Distance between column and spindle: 365 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm Travel paths X-axis: 500 mm Y-axis: 350 mm Z-axis: 120 mm W-axis: 450 mm U-axis: 5.5 mm Taper grinding: max. 16° Table Table size: 600 x 380 mm T-slots: 6, 10 mm wide, 50 mm spacing Table load: 300 kg Tool holder and speeds 22S: E23 Speed 22S: 4,500 - 22,500 rpm 45S/45ST: E19 Speed 45S/45ST: 9,000 - 45,000 rpm Dujbjv Rck Uj Et Tfuet 80S: F6 80S speed: 40,000 - 80,000 rpm T10/T16: Ø 3 mm T10/T16 speed: 100,000 / 160,000 rpm Groove grinder: 2,900 - 34,500 rpm Planetary motion: 5 - 250 rpm C-axis: 0 - 5 rpm Feed rates X/Y feed: 0 - 1,200 mm/min W-axis feed: 900 mm/min Z-axis feed: 0.5 - 12,000 mm/min MACHINE DETAILS Digital measurement accuracy: 0.001 mm Basic deviation: 0.003 mm Power: 7.5 kW Compressed air requirement: 20 m³ Mains pressure: 5 bar Space requirement: 3.5 x 4.4 m Machine height: 3.5 m Power consumption: 8.3 kVA Weight: 3.1 t EQUIPMENT - Groove grinder - Rotary table, 300 mm diameter - Swivel table, 200 mm diameter - Coolant system - Extraction system - High-quality accessories included

Year of construction: 2004, Condition: used, Angelli Model A500/540 Ravioli Cappelletti Forming Machine. S/No. S901.NO323 (2004) Incomplete Duob Et Tswayhusfuot Please Note: These lots are located in Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2000, operating hours: 6,000 h, Functionality: fully functional, machine/vehicle number: 7807005/3175.860T03, Complete robot cell: CO2 welding robot very well maintained including 2-way turntable for operator and with extraction system TECHNICAL DETAILS Robot payload: 10 kg Type of welding: CO2 MACHINE DETAILS Dusbeu Rdgno Et Tfuet Robot dead weight: 245 kg Weight: 450 kg Cell + table dimensions: 4000 x 3600 mm + 1600 x 870 mm Operating voltage: 3x400 V; 50 Hz Power: 20 kVA

Condition: new, Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 7525-4237-FA, arm reach: 2,500 mm, TECHNICAL DETAILS Single-point repeatability: 0.020 mm Volumetric accuracy: ± 0.029 mm Range: 2.5 m Software Software: Polyworks Metrology Suite 2019 IR8 Version: 64-bit Jan 2020 Computer Model: DELL Precision 7740 Processor: INTEL Core i7 Memory: 16 GB RAM Hard Drive: 500 GB HDD Operating System: Windows 10 Pro 64-bit MACHINE DETAILS Arm weight: 8.0 kg Operating temperature: 0 °C – 50 °C Storage temperature: -30 °C – 70 °C Relative humidity: 10% – 90% (non-condensing) Operating altitude: 0 – 2,000 m EQUIPMENT - Probe 15 mm - 6 mm probe - 3 mm probe Dob Etev I Uxxj Tfuout - Magnetic base - Calibration bar - Calibration sphere - Carrying case

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 1108262, Equipment: chip conveyor, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Equipment: Chip conveyor Further information according to the manufacturer - without guarantee Travel X / Y / Z: 406 x 305 x 254 mm Distance spindle to table: 356 mm Spindle speed: 10,000 rpm Tool taper: #40 Table dimensions: 730 (914) x 305 mm T-slot spacing: 110 mm T-slot width: 16 mm Number of slots: 3 Table load: max. 227 kg Tool diameter: 89 mm Tool length: 178 mm Tool weight: 5.4 kg Tool slots: 10 Machine dimensions: approx. 2.3 x 2.3 x 2.7 m Dueb Et Tjv Natdjfuet Weight: approx. 1.6 t

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,797 h, Functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, swivel angle B-axis (min.): -30 °, swivel angle B-axis (max.): 90 °, TECHNICAL DETAILS Control: MillPlus iT Heidenhain X-travel: 880 mm Y-travel: 630 mm Z-travel: 630 mm B-axis: -30° / +90° C-axis: available Spindle and drive Spindle speed: 20-12,000 rpm Spindle mount: SK 40 DIN 69871 Torque at 40% / 100% duty cycle: 28 / 19 kW Table and workpiece Table size: 1,250 x 700 mm Table load: 650 kg NC rotary table: Ø 800 mm Tool magazine Tool changing device: 2 × 16 positions MACHINE DETAILS Total power requirement: 44 kW Machine weight: 9.5 t Space requirement: 3.50 × 3.20 × 2.60 m Coolant system standard volume: 250 liters EQUIPMENT - Renishaw OMP60 touch probe - Rotoclear - Flushing gun - High-pressure pump Deb Ejv Suuzst Tfuout - Chip conveyor - Air filtration system - Internal coolant system

Condition: good (used), Year of construction: 2018, operating hours: 8,752 h, Functionality: fully functional, machine/vehicle number: VDB180076, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Control: HEIDENHAIN iTNC 530 HSCI X-axis: 2,000 mm Y-axis: 1,100 mm Duob Etjv N Hrgs Tfujt Z-axis: 800 mm Table clamping area: 2,200 x 1,000 mm Distance spindle nose to table: 150 - 950 mm Milling spindle Tool holder: SK 50 Spindle speeds: 6,000 rpm Spindle drive: 30 kW Feed rate Feed range: 8,000 mm/min Rapid traverse: 15 m/min Tool data Tool changer: 20 Tool weight: 15 kg Tool length: 400 mm Tool diameter: 125 / 250 mm MACHINE DETAILS Total weight: approx. 20 t Dimensions (L x W x H): 5.5 x 5.4 x 3.7 m On-time: 22,813 h Spindle hours: 8,752 h EQUIPMENT - Electrical preparation for 4th and 5th axes - Electronic handwheel - Automatic central lubrication system - Hardened and ground guideways - Fully protective cabin - Internal coolant system with 20 bar - Chip conveyor

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: A8EW4982, turning diameter: 250 mm, spindle speed (max.): 6,300 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, controller model: Sinumerik Operate, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 100 mm Z-axis travel: 300 mm C-axis for main spindle: available C-axis speed: 0 - 1,000 rpm Main drive power: 5.5 kW Main drive speed: 60 - 6,300 rpm Tool turret: 12-way VDI16 Driven tools: 6 pieces Driven tool speed: 200 - 6,000 rpm Driven tool power: 1.2 kW Max. finished part length: 120 mm Duob Eev Dlr Ist Tfust Max. finished part diameter: 25 mm Max. finished part weight: 0.5 kg EQUIPMENT - Coolant system - Pneumatic hollow clamping cylinder - Pneumatic tailstock - Full enclosure - Central lubrication - WinNC for Sinumerik Operate -I/M - Machine license M.M - SINUMERIK Operate key module - MOC: Integrated PC with 12" color display, keyboard and mouse - Safety devices in accordance with CE - Various tool holders (radial tool holder M4 (2x), radial tool holder M3 (1x), collet holder ESX 16 (2x), set of collets ESX 16 (1x), indexable insert drill holder Ø16 mm (1x), boring bar holder Ø10 mm (1x), radial angle milling holder 90° (1x), axial milling holder straight (1x)) - Various clamping systems (RÖHM power chuck KFD #HS 895/3 with 926 mm through-hole, 1 set of soft top jaws (432 095) with 1/16" × 90° serration, set of hard reversible jaws 95/3, collet chuck 385E / 5C including draw tube (A8Z 150 010) for draw collets 385E / 842 / 5C Ø2 - 25.5 mm

Condition: used, Selection of Pasta Manufacturing dies and forms for tortellini and ravioli Please Note: These lots are located in Preganziol, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dueb Eswaktzst Tfuot

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, rotational speed (max.): 12,000 rpm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, Fully functional condition + regular maintenance by machine manufacturer TECHNICAL DETAILS Control: Heidenhain iTNC530 with handwheel X-axis: approx. 3,000 mm Y-axis: approx. 6,000 mm Z-axis: approx. 1,250 mm 4th axis: swivel axis Spindle Spindle type: milling spindle for styrofoam (can be converted to high-frequency spindle) Spindle power: 4.4 kW Spindle speed: 12,000 rpm Tool holder: 78/8 flange Tool clamping: Manual with union nut Dob Eev Dhlqot Tfusut Drives & feed Feed speed (X, Y, Z axis): up to 20 m/min Axis acceleration (X, Y, Z axis): up to 1.5 m/s² MACHINE DETAILS Connected load: approx. 28 kW Pre-fuse: 63 A Machine space requirement: approx. 5,000 x 10,000 x 4,500 mm Total weight: 10,000 kg With little effort, it can be converted to an HF spindle with 24,000 rpm and HSK63 holder. This enables the machining of a wide variety of materials, including aluminum. The integration of a tool changer is also easy to implement.

Year of construction: 2011, Condition: ready for operation (used), Functionality: fully functional, saw blade diameter: 550 mm, conveyor belt length: 300 mm, conveyor belt width: 6,000 mm, machine/vehicle number: 0112613,, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Sawblade diameter: 550 mm Roller conveyor: 300 x 6,000 mm Material feed Feed: automatic Material clamping: present EQUIPMENT - Automatic feed - Material clamping Duobev I U R Ij Et Tfuot - Control system - Chip extraction system - Two light barriers Further information according to the manufacturer - without guarantee Machine length: approx. 17.2 m Sawblade speed: approx. 2,800 rpm U-axis travel: approx. 7.4 m Sawblade swivel range: -45° to +45° Maximum loading length: 7,200 mm

Condition: used, Year of construction: 2001, Tortellinatrice Mario Agnelli Type 500.540 Ravioli/Cappelletti Maker. S/No. 915.0 226 (2001) Please Note: These lots are located in Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dusb Eov U U Tvot Tfuot

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 54796/14A, ram adjustment: 100 mm, stroke adjustment: 140 mm, pressing force: 80 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! Dusb Etov I Uwue Tfujt TECHNICAL DETAILS Press force: 80 t Stroke adjustment: 8 - 140 mm Ram height adjustment: 100 mm Stroke rate: 105 / min Mold installation Maximum mold height: 355 mm Mold upper section weight: 250 kg Mold height at bottom of cylinder: 355 mm MACHINE DETAILS Total weight: 7,600 kg Operation: Two-hand operation Further information according to the manufacturer - without guarantee Machine dimensions: approx. 1.6 x 2.3 x 2.6 m Ram area: approx. 600 x 280 mm Table size: approx. 900 x 620 mm

Condition: used, Mezzanine with Horizontal Screw Distribution Line and Automated Dough Shutters. IMI Mixer. S/No. 094040 Associated Hoppers and Pumps, Inspection Walkways Access Ladder and Control Panels. Deb Etov U U E Sj Tfueut Please Note: These lots are located in Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.