Second-hand machinery for sale (1,946)

Condition: used, Max. load capacity: 6300 kg, span: approx. 20,000 mm, with electric trolley, bottle hook and floor operation. Delivery time 23.05.2025! Fpolq Rrjwact Hetrjg

Condition: used, Year of construction: 2006, Homag Optimat KAL310/6/A3/S2 Edgebanding Machine, 6-Position Tape Cart, Quickmelt glueing unit QA3, Approx 1100mm Wide Machine Roller width conveyor, Tilting outfeed conveyor to return belt conveyor. Windows based control. Serial No. 0-200-15-4533 (2006) Fpslq Rjwcyzmsrtreg Please Note: This lot is located in Exeter, UK. Unfortunately there are no loading facilities on-site. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 1971, General overhaul 2021, 6 rollers, pipe diameter 5 – 45mm, straightening speed 37.5-75 m/min (3-speed manual transmission), drive power 2x 4 KW Fpelqjwg Hfys Rrtrog

Condition: used, Year of construction: 2021, machine/vehicle number: SO-04831, 1 water cooler HYFRA eChilly3, 1 air filter system AIGERT Atmos Nano HEPA 230 Fpolowh Ty Tjq Rrtreg

Condition: used, Arodo Total Bag Handling Bag Filling Machine Bag input bag filling bag closing serial 060892, bag cap. Max 50 kg, pressure 6-9 bar, 400 vol Fpolewd Sgwjq Rrtrog Actemum ADS Tec touch screen control Outfeed powered conveyor Outfeed powered belt conveyor

Condition: good (used), Year of construction: 2018, Functionality: unexamined, machine/vehicle number: 25001, "- Number of threading stations: 1 to 3 - Chuck usage during the cycle: 2 - Type of tip/reference tip usage mode used during the cycle: 3 - Type of locating tip used: 4 - Position of the locating tip when clamping the workpiece: 5 to 80 mm Fpjlqou R N Hyj Rrtrjg - Transfer speed between loading and threading stations: 1 to 1000 m/s - Transfer position for loading and unloading: 0 to 795 mm - Transfer position for thread station 1 and/or 2 and/or 3: 0 to 795 mm - Free text for operator support: 9 - Thread type (Syncroll, incremental): 10 - Raw diameter before thread cutting: 1 to 200 mm - Base diameter before thread cutting: 1 to 200 mm - Tooth offset of the workpiece: -5 to +5 mm - Number of workpiece teeth: 1 to 200 - Difference in center distance between workpiece and discharge: 0 to 100 mm - Maximum permissible force (machine failure if exceeded): 0 to 330 kN - Start position adjustment for knurl before thread cutting: 0 to 359.999° - Knurling speed and direction: 0 to 45 rpm - Force tolerance for faulty workpiece (machine failure at the end of the cycle): 0 to 330 kN - Torque tolerance for faulty workpiece (machine failure at end of cycle): 0 to 150 % - Marking diameter for workpiece (Syncroll tapping): 1 to 200 mm - Rotation speed for marking (Syncroll thread cutting): 0 to 45 rpm - Feed speed of the carriage for marking (Syncroll thread cutting): 0.01 to 5 mm/s - Penetration time for marking (Syncroll thread cutting): 0 to 10 s - Penetration speed (Syncroll thread cutting): 0.01 to 5 mm/s - Planing time (Syncroll thread cutting): 0 to 10 s - Return stroke of the slide for metal relief (Syncroll thread cutting): 0 to 5 mm - Return stroke speed of the slide for relief (Syncroll thread cutting): 0.01 to 5 mm/s - Knurled position at the end of the thread (Syncroll tapping): 0 to 359.999° - Knurling position at thread completion (incremental tapping): 0 to 359.999° - Knurling position at the end of the slide feed (incremental thread cutting): 0 to 359.999° - Knurling speed when approaching the workpiece (incremental thread cutting): 0 to 45 rpm Full supporting documentation (electronic format), including: Operating instructions drawings Certificate of conformity Consumables lists Backup files etc. Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Nissan Asset Ref: AF206614 - Acquisition cost €500k+ - Condition: Professionally dismantled, tagged, packed and stored in Liverpool, UK"

Condition: used, Year of construction: 2000, Consisting of: Cutting/breaking table, make HEGLA, type: OPTIMAX 6032ES, weight: approx. 3500 kg, base area: approx. 3000x8000 mm, with cutting bridge and tilting table Fjlqswactae Rrtrspg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 443 / 9-901, operating pressure: 6 bar, Limit pressure: 8 bar Fpolq Rrtjwitycsrjg

Condition: good (used), Year of construction: 2009, 3 ZF 180, switch and control cabinets Fjlq Rrewg Hd Aotrjpg

Year of construction: 2008, operating hours: 19,280 h, Condition: used, machine/vehicle number: 5700A1, (internal no.: 181) consisting of: take-up unit, number of spools: 1, horizontal axis, stranding pitch: 4-25 mm, adjustable, traversing mechanism: UHING system, bow speed: max. 2,000 rpm, torsion: max. 4,000 rpm, external pre-strander, speed: max. 4,000 rpm, rotating cover strand pay-off unit, number of spool positions: 12, spool axis: vertical, mechanical band brake with dancer arm, rotating heart strand pay-off, number of spools: 1, mechanical band brake with dancer arm, control cabinet, SEI VT310W control system, Siemens S7, installation length: approx. 17 m, pay-off wire/strand diameter: 0.13 - 0.4 mm, heart diameter: 0.4 - 0.5 mm, max. rope diameter: 2.5 mm, tensile strength: 1960 - 2750 N/mm², total weight: approx. 13,350 kg (The stranding head was replaced in 2012 from DTAF500 to DTAR400) Fpoljwh Tyajq Rrtreg

Condition: used, 5x Van Aarsen PM4000 Stainless Steel Multi Mix Single Shaft Paddle Mixers Volume 4000 litre, with electro motor, 400 volt, 75 kW, with in and output, for minerals Fpslq Rrjwd Sgketrog

Condition: good (used), Year of construction: 2012, Functionality: unexamined, machine/vehicle number: 25001, "General specifications: - Maximum grinding length: 150 mm - Axle height on the bench: 251 mm - Center height from the floor: 1190 mm - Maximum outer diameter of the workpiece: 360 mm - Maximum grindable workpiece length: 200 mm - Maximum loadable weight (at 100 mm): 150 daN - Total installable power: 55 kW - Machine weight: 7000 kg X-axis: - Maximum travel: 330 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Transducer: Linear decoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Fslsu Egagsq Rrtropg Z-axis: - Maximum travel: 590 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Converter: Linear encoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Internal electric motor spindle: - Maximum revolutions: 36000 rpm (S6) - Grinding wheel motor power: 22 kW (S6) - Model: FISCHER MFM-1418/36/1HJDN16 - Maximum theoretical peripheral speed of the wheel: 50 m/s Workpiece headstock: - Spindle taper: Morse taper 5 / Asa 8 - Bar capacity: 38 mm - Speed range: 10 - 800 rpm - Torque: 58 Nm - Motor: 20 Nm / 3000 rpm Internal grinding wheel: - Diameter: 138 mm - Thickness: 49 mm - Maximum permissible speed: 6000 rpm Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Full supporting documentation (electronic format) including: Owner's manuals, drawings, certificate of conformity, consumables lists, back up files etc. - Nissan Asset Ref: AF201526 - Acquisition cost €345k+ - Professionally dismantled, marked, packed and stored in Liverpool, UK"

Condition: good (used), Year of construction: 1975, Pressure max. 50t, press control with display Siemens Simatic HMI, safety device Sick Fpolqewg Hdcj Rrtrog

Year of construction: 2010, operating hours: 10,304 h, Condition: used, (internal no.: 182) consisting of: Processing material: stainless steel or galvanized steel wire, Pay-off wire dimensions: 0.08 - 0.25 mm, Strand diameter: 0.24 - 1.0 mm, Tensile strength: 1,500 - 3,000 N/mm², Stranding length: 1.2 - 10 mm, Strand/rope construction: 1x7, Operating direction: right to left, Mechanical dancer arm, Wire break detectors, Oil spray system, Pre-twisting unit, Two pulleys in 8" arrangement, Speed continuously adjustable, Overrun unit, Number of spools: 1, Spool axis vertical, Extension mechanism: cross-threaded double screw, Laying lay length: fixed, 3.97 mm, Torsions: 6,400 tpm, External pre-twister, Speed: 6,400 rpm, Wire lubrication: MICRO spray system with compressed air, drain unit, number of coil positions: 7, coil axis horizontal, main control panel, main cabinet, control SEI VT310W, installation length: approx. 640 cm Fjlq Rrowh Tx Notrepg

Condition: good (used), Year of construction: 2016, Hosokawa Mikron dual-chamber unloading glove box/isolator, fully refurbished in 2016 by Concept Containment Designs, 316 stainless steel, ATEX compliant. Includes CO.RA dosing valve, exhaust fan, and Mettler-Toledo scale. Alloy: 316 stainless steel Fslev Rxaxeq Rrtropg

Condition: good (used), Year of construction: 2011, Serial No. A11006-01, max. press force 75 t, stroke rate 50-150 strokes/min., throat 330 mm, ram adjustment 80 mm, stroke 120 mm, connected load 16 kW, hydraulic clamping station, Roemheld Fpslswg Hcreq Rrtrog

Condition: good (used), Year of construction: 2021, with autosampler 7693A/G4513A (model year 2020). GC is model G3540 Fjlqjv Rw Nlj Rrtrepg

Condition: good (used), Year of construction: 2012, Serial No. A11005-01, max. pressure 600 t, press control with display, Siemens, type Multi Panel Touch, stroke rate 15-50 strokes/min., ram adjustment 15 mm, stroke 250 mm, connected load 60 KW, weight 45.5 t, Skako feed station, continuous heating furnace, conveyor belt, workpiece automation, MSG, extraction, URS, type Smog-Hog SH 40m T3, inspection system, tech 3D, built in 2012, Serial No. 096951199, Cognex camera, Epson robot, PLC system control with Siemens Simatic Multi Panel Touch display, switch and control cabinets, operator panels, safety devices Fpjlqowg Hbuo Rrtrjg

Condition: good (used), last calibration Aug 2024 Felev Rw Eyjq Rrtropg

Condition: good (used), Year of construction: 2022, Serial No. 8413, for cylindrical components (polishing, deburring) PLC control with display, Siemens, type HMI Touch, coolant system with belt filter, Stevens, type PF90, oil mist extraction, LTA, type E 120 X-1-H, 1 inventory of accessories and spare parts Fpelowg Hadsq Rrtrsg

Condition: good (used), Year of construction: 2020, Vacuum system (cost 74,000 GBP) – UNUSED ON PALLET, PD HO250S6 1K1 EASD A30 BFO VO 00A00001 (ATEX) Felqjv Rwz Io Rrtrspg

Condition: good (used), Year of construction: 1994, Serial No. 5-5, control, Siemens, type 3T, 2 horizontal spindles, 2 cross slides, swivel arm for workpiece loading and unloading, workpiece automation Felq Rrowg E Uastrjpg

Condition: good (used), Year of construction: 2012, Serial No. 68180, control, Siemens, type 840D solution line, 2x3 axes (X/Z/C), 2 spindles, 2x 12-station turrets, driven tool stations, max. speed 4,000 rpm, 2x face chucks, Hydac 170S spindle cooling, workpiece automation, remote diagnostics for NC/MMC Fpelqswg E Tpo Rrtrjg

Year of construction: 2014, Condition: good (used), Serial No. 2.930, wire-link belt, throughput width 250 mm, throughput height 100 mm, spray cleaning with flat jet nozzles, multi-tank system (500 l rinse tank + 800 l wash tank), heating, Siemens PLC control with touch display, switch and control cabinets, stainless steel collecting tray Folewg E Nwsq Rrtrjpg

Condition: good (used), Year of construction: 2014, operating hours: 33,703 h, Serial no. 200167, control, make Siemens, type 840 Dsl (index C200-4D SL), bar capacity 40 mm, 6 work spindles, 10 slide units with X/Z NC axis, 2 synchronous spindles (swivel axis and Z axis NC controlled in positions 5.2 and 6.1), 2x three-jaw chucks Röhm KFD-HS 110, 1x boring device for three-jaw chuck, rear machining device on L 6.2, 1 set of driven tool carriers, bundle loader, make IEMCA, type SIR MS40F, model 33, year 2014, serial no. 02143 MB03, with tapping unit and minimum quantity lubrication, 6 material slides/rotary sleeves for D18 mm, 2 sets of internal clamping sleeves D18/D32 mm, drill breakage detection, coolant system, oil mist extraction, Büchel, CO2 extinguishing system, Kraft and Bauer, Fpjlq Rrjwg E Hpstrsg Operating hours: 33,703