Second-hand machinery for sale (2,395)

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 2320005, travel distance X-axis: 550 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 375 mm, number of slots in tool magazine: 40, Equipment: chip conveyor, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Control: Siemens 840 DSL X-axis travel: 550 mm Y-axis travel: 450 mm Cgob Eowhdp Ee R Daxot Z-axis travel: 375 mm Tool changer Capacity: 40-station Tool holder: HSK63 Chip disposal Chip conveyor: Knoll 440S-1/250 Year of manufacture: 2017 Cooling system Coolant and lubricant treatment system: Knoll Further information according to the manufacturer - without guarantee Swivel table / counter bearing with face gearing: Swivel time 0 - 180° approx. 3.0 s Prepared for A and U axes: yes Support for X / Y clamping blocks: yes Speed range A and U axes: 1 - 50 rpm Speed range C-axis: 7-station 4-axis Speed range: 10 - 10,000 rpm (1 - 17,500 rpm) Ramp-up time t₀ - 4: 0.45 s Drive system: Ball screw Rapid traverse X / Y / Z: 75 / 75 / 75 m/min Tool change system: Pick-up Max. tool diameter: 70 mm / 160 mm (adjacent position free) Max. tool length: 275 mm Max. tool weight: 7.5 kg Transport dimensions L x W x H: 2.75 x 2.85 x 2.65 m Max. table load: 1,000 kg Machine weight: 8.3 t Total connected load: approx. 64 kVA Control system: Siemens SINUMERIK 840 D

Condition: good (used), Year of construction: 2013, operating hours: 3,901 h, Functionality: fully functional, machine/vehicle number: 169527, turning diameter: 710 mm, travel distance X-axis: 690 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 2,045 mm, rotational speed (max.): 10,000 rpm, The machine can be shipped free of charge for €2,500. TECHNICAL DETAILS X-axis travel: 690 mm Y-axis travel: 230 mm Z-axis travel: 2,045 mm B-axis swivel range: up to 225°, 0.001° interpolation Turning parameters Turning diameter: 710 mm Turning length: 2,000 mm Torque: 65 Nm Bar capacity: 110 mm Spindle bore: 110 mm Spindle nose: HSK-A63 Spindle speed: 38 - 2,800 rpm Speed: 50 - 10,000 rpm Counter spindle Counter spindle motor power: 22,000 W Max. counter spindle speed: 3,800 rpm Maximum counter spindle torque: 412 Nm Counter spindle bore: 80 mm Spindle drive Spindle motor power: 30,000 W Tool data Number of tool magazine slots: 80 Tool length: 400 mm MACHINE DETAILS Overall length: 7,930 mm Overall width: 2,998 mm Cgob E R Dewff R Sjaxjt Overall height: 3,157 mm Total weight: 16,000 kg EQUIPMENT - NC tailstock - IFS exhaust system - Door automation - Continuously adjustable speed and counter spindle speed - NC steady rest SMW SLU-Z 3.2 (clamping range Ø50–200) - In-process measurement with Renishaw possible - Documentation/Manual

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, pressing force: 152 t, working length: 3,100 mm, Valid until 10/2025 TECHNICAL DETAILS Press force: max. 1,500 kN Working length: max. 3,100 mm Diameter: 690 mm Upper beam stroke: max. 300 mm Speeds Upper beam drop speed: 100 mm/s Upper beam pressing speed: 10 mm/s Upper beam return speed: 100 mm/s Backgauge Backgauge range: 600 mm Number of backgauge axes: 6 Compressed air Compressed air consumption for sheet thickness measurement: 0.0002 m³/min at 6 bar MACHINE DETAILS Length: 4,360 mm Width: 2,120 mm Height: 2,885 mm Weight: 12,800 kg Mains voltage: 3 x 400V/50/60Hz/N/PE Slow-blow fuse: 63 A Power consumption: 22 kW EQUIPMENT - Hydraulic tool clamping (top/bottom) - CNC-controlled bending aid Cgsbjwffkxj E R Daxst - Safety light curtain - Sheet thickness measurement

Condition: refurbished (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 304-1196, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, table width: 900 mm, table length: 900 mm, tank capacity: 1,200 l, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 500 mm Z-axis travel: 400 mm Table and container Workpiece clamping table: 900 × 900 mm Container size: 950 × 950 mm Work container filling height: 450 mm Distance from table to electrode holder: 215 - 615 mm Loads Max. electrode weight: 50 kg Csb E Rowf Hgnj Daxsgt Max. workpiece weight: 2,000 kg Dielectric tank capacity: 1,200 l Tool changer: 6 tools MACHINE DETAILS Dimensions (W × D × H): 2,070 × 2,850 × 2,980 mm Machine weight: 5,500 kg Electrical Specifications EDM generator: 60/120 A EQUIPMENT - Andronic 400 control system - Menu-driven user interface - AAC-3AM process control - Integrated state-of-the-art technology - Hand control panel with handwheel - 3 cartridge filters - Integrated cooling unit - CO₂ extinguishing system - New gears, bearings, and ball screw - C-axis with positioning, rotation, and EDM functions, Heidenhain RON275 direct measuring system - New container drive with chain tensioner - Silver metallic paint finish - Hirschmann heavy-duty chuck H8.11.15/3 - Laser measurement in all axes - Services available: transport, training, commissioning

Condition: ready for operation (used), Year of construction: 2013, operating hours: 24,517 h, Functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 650 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 48, Bidding obligates the buyer to pick up the vehicle by May 30, 2025. Geometry report available! TECHNICAL DETAILS X-axis travel: 1,300 mm Y-axis travel: 800 mm Z-axis travel: 650 mm Control manufacturer: Fanuc Feed rate: 24,000 mm/min Clamping table Table dimensions: 1,550 x 800 mm Spindle-to-table distance: 250 - 900 mm Table load: max. 2.5 t Workpiece size: 1,550 x 800 x 550 mm Spindle Spindle speed range: 50 - 20,000 rpm Spindle power: 18.5 kW (S6) Torque: 95 Nm (S6) Tool holder: HSK63 Number of tool positions: 48 Coolant system External coolant pressure: 7 bar Internal coolant pressure: 40 bar Accuracy Positioning accuracy: ± 0.0025 mm Repeatability: ± 0.002 mm MACHINE DETAILS Width: 3,850 mm Depth: 4,090 mm Height: 3,560 mm Machine weight: 16,000 kg On-time: 38,291 h Machining time: 20,068 h Program on-time: 24,725 h Spindle on-time: 24,517 h EQUIPMENT - Electric handwheel - Chip conveyor - Paper belt filter - Internal & external air supply - Marposs infrared sensor - Preparation for oil mist extraction - Blum tool measurement with laser - Work area flushing Cgjb Eowgbx Ue R Daxst - Manual flushing gun - Coolant temperature control - Machine documentation - Geometry report A separate tool changer can be used for dismantling and loading. service providers are provided.

Condition: used, Lisec Cutting Table GFB Please check our website for machine specification Location: This lot is located in Swansea, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Cgsbewfgxqj E R Daxet

Condition: ready for operation (used), Year of construction: 1979, Functionality: fully functional, machine/vehicle number: 2287, pressing force: 16 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! Machine was rebuilt in 2017! TECHNICAL DETAILS Pressure: 160 kN Motor power: 3 kW Safety clearance: 140 mm Overtravel: 11 mm Overtravel time: 70 ms Further information according to the manufacturer - without guarantee Stroke: approx. 250 mm Thrust: approx. 270 mm Installation height: approx. 400 mm Table surface: approx. 800 x 500 mm Bore diameter: approx. 50 mm Cgjb E R Dajwhdplsxet Ram surface: approx. 220 x 360 mm Weight: approx. 2.3 t Dimensions: approx. 1.8 x 1.5 x 2.7 m

Condition: used, Mix ET121/101 Horizontal Mixer Cgjb E R Djwf Ixloaxet V: 1120L ATEX 20 (i),22 (22) SS304 Electrical: 380V - 50Hz Dimension: l 2700mmx w 1000mm x h 200mm Condition: Very Good

Condition: like new (used), Year of construction: 2003, Functionality: fully functional, cutting length (max.): 6,000 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 500 mm, saw blade diameter: 550 mm, pivoting range: 45 °, Brand new machine - never used! TECHNICAL DETAILS Maximum cutting length: 6,000 mm Minimum cutting length at 90°: 375 mm Minimum cutting length at 45° (inclined): 375 mm Saw blade diameter: 550 mm Saw blade speed: 2,250 rpm Inward tilt range (pneumatic): 90° - 45° Manual tilt range: up to 22.5° inward and up to 140° outward (with digital display) Inward tilt range (pneumatic): 90° - 45° Feed and connections X-axis feed length: 5,000 mm Y-axis feed length: 500 mm Input voltage: 400 V Compressed air connection: 7 bar Motor power per unit: 4 kW MACHINES DETAILS Total width: 1,350 mm Total height: 1,550 mm Total weight: 1,850 kg Cob Eev Rf Uve R Daxegt EQUIPMENT - 2 additional heads included (4 heads included in total) - Bottom cutting possible for precise cuts - Pivoting and tilting saw units; intermediate angle manually adjustable - Includes cutting/excess length module, protective covers, and pulsed coolant system

Condition: good (used), Year of construction: 1971, General overhaul 2021, 6 rollers, pipe diameter 5 – 45mm, straightening speed 37.5-75 m/min (3-speed manual transmission), drive power 2x 4 KW Cgob E R Daowg Hfyexst

Condition: used, Bystolic IGU line 3 Cgob E R Daswfgw Hsxet Click here for Specification Location: This lot is located in Swansea, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 1983, Functionality: fully functional, machine/vehicle number: 3182, pressing force: 200 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! Machine rebuilt in 2017! TECHNICAL DETAILS Max. pressure force: 200 t Year of manufacture: 1983 Year of rebuild: 2017 Motor power: 30 kW Safety clearance: 180 mm Overtravel: 18 mm Cgsb E R Daswhdn Ijxst Overtravel time: 90 ms Material feed Roll feed: 2 rolls Manufacturer: Eckardt

Condition: used, Bauermeister TB910/101 Grinding Station UMT 3.3 max flowrate:2000kg/h air pipe (i) diam.204mm, air pipe (o):204mm filter DCE, Elektror fan SS304L total h.:2029, l.2240,w.1190 Condition: Very Good Cgsbjwf Ivds E R Daxet

Condition: good (used), Year of construction: 2009, 3 ZF 180, switch and control cabinets Cjb Eswg Hd Aj R Daxegt

Condition: used, Bystronic IGU line 2 Cjbjwfgwas E R Daxjgt Go to our website for machine specification Location: This lot is located in Swansea, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 007707133, saw blade diameter: 550 mm, rotational speed (max.): 2,800 rpm, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Tool diameter: 550 mm Saw blade speed: 2,800 rpm MACHINE DETAILS Total weight: 1,400 kg Air requirement: 200 Nl/min Operating pressure: 6 bar Further information according to the manufacturer - without guarantee Control: R 700 Cgsb E Rewhdnzj Daxjt Angle adjustment: 45°-90° Cutting length: min. 3,700 mm Dimensions: 5.4 x 1.4 x 1.9 m at a cutting length of 3,700 mm Weight: 1.4 t

Condition: used, Lisec KSR. See our website for specification Cgob E R Dajwfg A Nsxst Location: This lot is located in Port Talbot, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 1127626, table width: 400 mm, table length: 600 mm, Equipment: chip conveyor, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Table dimensions: 400 x 600 mm EQUIPMENT - Chip conveyor - Tool changer Further information according to the manufacturer - without guarantee X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Distance from spindle to table: 546 mm Spindle speed: 10,000 rpm Tool taper: BT 30 T-slot spacing: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Number of slots: 3 Table load: max. 113 kg Tool changer: Double gripper Tool diameter: 51 mm Cgeb E R Djwhdnnoaxst Tool length: 178 mm Tool weight: 2.5 kg Tool slots: 20+1 Machine dimensions: approx. 2.6 x 1.7 x 2.6 m Transport dimensions: 2.5 x 2.0 x 2.5 m Weight: approx. 2.4 t

Condition: used, Cutting Table Lisec ESL +ATH loader Cjb E R Dswfg Aveaxsgt Location: This lot is located in Port Talbot, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 1978, Functionality: fully functional, machine/vehicle number: 3073, pressing force: 200 t, ram stroke: 180 mm, Machine recovered from the insolvency of an automotive supplier - machines are still in operation! Rebuilt in 2008! TECHNICAL DETAILS Press force: 200 t Max. stroke length: 180 mm Control: Two-hand operation Further information according to the manufacturer - without guarantee Front column clearance: 420 mm Side column clearance: 220 mm Table width: 830 mm Table depth: 530 mm Cgsb Eewhdm Dj R Daxjt Machine dimensions: 1.3 x 1.5 x 2.7 m

Condition: used, Year of construction: 2019, Cooltemper Jetstream TCF-GTH-84160AN Horizontal Flat Glass Tempering Furness. S/No. Q-G39 (2019) Max Temp 750℃, Operating Temp 700℃, 2300mm Wide Infeed Powered Roller Conveyor. Various spare parts, Consumables & Rollers, Full Manuals and Parts/Wiring Diagrams. Country of Origin: Taiwan Ceb E R Dajwfgvcoxegt Location: This lot is located in Pontyclun, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: P5276678, ram adjustment: 70 mm, stroke adjustment: 100 mm, pressing force: 35 t, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Nominal force: 35 t Stroke adjustment: 8 - 100 mm Ram adjustment: 70 mm Stroke rate: 130 / min Motor power: 3 HP Other auctions from the same location: Cgobewhdh Ie E R Daxot Further information according to the manufacturer - no guarantees given Ram surface: approx. 350 x 180 mm Space required: approx. 1.0 x 1.6 x 2.3 m

Condition: used, Year of construction: 2006, Homag Optimat KAL310/6/A3/S2 Edgebanding Machine, 6-Position Tape Cart, Quickmelt glueing unit QA3, Approx 1100mm Wide Machine Roller width conveyor, Tilting outfeed conveyor to return belt conveyor. Windows based control. Serial No. 0-200-15-4533 (2006) Cgsbewcyzmj E R Daxst Please Note: This lot is located in Exeter, UK. Unfortunately there are no loading facilities on-site. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 1800027, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Cgsb E Rowhdqco Daxjt Chip conveyor: present Control system: Siemens 840D Coolant and lubricant processing system Manufacturer: Knoll Type: AE1058 Year of construction: 2004

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 1140165, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Control: Haas Spindle mount: CT 40 Cgobowhdk Nj E R Daxot EQUIPMENT - Tool changer - Chip conveyor - Swivel axis Further information according to manufacturer - without guarantee Travel paths X / Y / Z: 711 x 406 x 394 mm Distance spindle to table: 546 mm Spindle speed: 10,000 rpm Table dimensions: 864 x 381 mm T-slot spacing: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Number of slots: 3 Table load: max. 113 kg Tool changer: Double gripper Tool diameter: 64 mm Tool length: 178 mm Tool weight: 5.4 kg Tool slots: 18+1 Machine dimensions: approx. 2.8 x 2.2 x 2.6 m Transport dimensions: approx. 2.6 x 2.3 x 2.5 Transport weight: approx. 2.5 t