Screw Compressor GA45VSDF

Atlas Copco GA45VSDFF

Condition: excellent (used), Year of construction: 2010, ATLAS COPCO GA45VSDFF screw compressor, WATER-COOLED machine with inverter and dryer, after service Technical data: Capacity: 8.67 m³/min; motor power: 45 kW; Max. pressure: 12.75 bar; year: 2010 Hours: 9714 h!!! 33,500 EUR net 41,205 EUR gross The compressor is fully operational, ready for work, with warranty. Service provided. Lrsdpfx Adeyt Hzge Ask

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Operating range V630/1000M Min. / max. height 10 – 450 mm Lrodovpafyopfx Ad Ask Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Number of drilling units 3x Automatic tool changer 3x (3x 5 positions) Height measuring Included Width measuring Included Machine weight 12.000 kg Roller feed measuring system Max. speed 42 m/min Min. infeed length 1.500 mm Drilling unit VD40 Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides SAWING MACHINE Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N Machine weight +/- 8.500 kg

Condition: excellent (used), Year of construction: 2017, Atlas Copco GA45VSDFF screw compressor, machine with inverter and dryer, after service Technical data: Capacity: 8.67 m³/min; Motor power: 45 kW; Max pressure: 12.75 bar; Year: 2017 Operating hours: 9,714!!! Price: 46,500 net Lrodpfxeyfpb He Ad Aek 57,195 gross The compressor is fully operational, ready for work, comes with warranty Service provided.

Condition: good (used), Year of construction: 2007, overall weight: 1,400 kg, volume flow: 522 m³/h, pressure (max.): 12.8 bar, Equipment: refrigerant dryer, PROD. ATLASCOPCO TYPE GA45VSDFF Lrsdpfx Adsvrg R Us Ask YEAR 2007 CAPACITY (kW) 45 45kw OUTPUT (m3/min) 8.7 CIS (bar) 12.8 INVERTER yes BUILT-IN DRYER yes EXCHANGER no COOLED (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: good (used), Year of construction: 2012, CNC portal plasma cutting machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control system Working area: 2,500 x 9,000 mm Lrjdpfsu U Hm Ajx Ad Ajk 1 plasma torch with Kjellberg HiFocus 280i power source 2 autogenous torches for propane Oscillating conveyor table by Beuting Donaldson DFPRO12 filter unit for outdoor installation

Condition: good (used), Year of construction: 1994, Fillerblock, make Nagema, type: Varifill 40/10K/10PP, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRW-bottles, direction: left->right, Siemens S5 control, built 1994 L: 4.000 mm, W: 2.700 mm, H: 2.800 mm Lrsdpfx Aon D Hm Ssd Aek

Condition: excellent (used), Year of construction: 2006, Technical Data: Working width: 2100 mm Bending capacity: 28.0 mm Pre-bending: 22.0 mm CNC control Top roller diameter: 350 mm Middle roller diameter: 330 mm Side roller diameter: 240 mm Hardened rollers Conical bending device via tilt adjustment of both side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (L x W x H): approx. 3600 x 1500 x 1500 mm Weight: approx. 4.5 t The seller is not liable for typographical or data transmission errors. The machine's visual appearance, technical condition, and wear conform to its age; used machines are sold without any warranty. Lrodpfxex Dtt Ao Ad Aok

Condition: good (used), Year of construction: 1998, Battenfeld 600/200 CDC Lsdpfx Adjg Emvho Aerk Unllog 4000 Closing 60 TO Year 1997 Scrow 30 mm Injection weight approx. 90 g

Condition: used, Year of construction: 2019, CNC portal plasma cutting machine Manufacturer: Microstep Lodpfjxnmbnjx Ad Aerk Type: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m Plasma rotator "MasterCut" with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source Filter unit TEKA Ref. ä16426

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Ljdpfxoxp Rb Is Ad Ajrk