Compressor

Atlas Copco GA37

Condition: ready for operation (used), functionality: fully functional, power: 37 kW (50.31 HP), Year of construction: 2019, pressure (max.): 13 bar, usable tank capacity: 1,500 l, rotational speed (max.): 3,800 rpm, volume flow: 475.2 m³/h, machine/vehicle number: API866497, The compressor received a comprehensive service in December 2025, including an oil and filter change! TECHNICAL DETAILS Cut-in pressure: 8.5 bar Cut-out pressure: 10.0 bar Operating temperature: 76 °C Volume flow: 131.9 l/s Volume of pressure vessel: 1,500 l Manufacturer of pressure vessel: OKS Otto Klein GmbH Kledpfx Amezf Afqjrsu MACHINE DETAILS Engine power: 37 kW Engine speed: 3,800 rpm Operating hours (as of 12/2025): 31,006 h Machine weight: 860 kg The following work was carried out during the service in December 2025: Oil change Air filter cartridge replaced Oil filter replaced Oil separator cartridge replaced Emergency stop switch checked Safety valve checked Test run performed Oil level checked Oil leaks checked Air leaks checked Belt tension checked Drive coupling checked

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg Kodpfx Amjl Tuvdorolu

Condition: excellent (used), Year of construction: 2012, operating hours: 72,651 h, functionality: fully functional, Screw Compressor Atlas Copco GA37VSDFF Integrated inverter and dryer 37 kW 12.80 bar 7.37 m³/min Kjdpfxjy Rva Is Amrjlu Year of manufacture: 2012 Operating hours: 72,651

Condition: excellent (used), Year of construction: 2011, ATLAS COPCO GA37 37Kw 2011 SCREW COMPRESSOR! ATLAS COPCO GA37 screw compressor machine after service Technical data: capacity: 6.30 m3/min; 37 KW engine; max pressure 8 bar; year;2011 mileage;3431h!!! Kedpfx Amei D Ef Hjrolu Compressor fully functional, ready to work, warranty we provide service.

Condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 5,000 mm/min, in great condition, incl. load collective accumulator with high reserve, incl. hook block, electrics 400/230/24V, incl. central electrics for crane travel etc.! !Advantage no CAN bus control! also available as Craneset Kljdpfx Asq R N Tqjmreu

Condition: excellent (used), Year of construction: 2011, ATLAS COPCO GA37 37Kw 2011 SCREW COMPRESSOR! ATLAS COPCO GA37 screw compressor machine after service Technical data: capacity: 6.30 m3/min; 37 KW engine; Kjdpfxsi E Hnce Amrolu max pressure 8 bar; year;2011 mileage;6924h!!! Compressor fully functional, ready to work, warranty we provide service.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: API502813, overall weight: 970 kg, volume flow: 280.8 m³/h, pressure (max.): 13 bar, type of cooling: air, Equipment: type plate available, We offer: ATLAS COPCO GA37 Technical data: S/N: API502813 YEAR: 2005 CAPACITY (kW): 37 OUTPUT (m3/min): 4.5 CIS (bar): 13 HRS (DOC/GENERAL): 95183 INVERTER: no BUILT-IN DRYER: no EXCHANGER: no COOLED (AIR/WATER): air ON THE TANK: no Klodpfx Amjv Hqkusreu DOCUMENTS: no CONNECTION: 2' and 1 1/2' S014585

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours Klodjxgumcepfx Amreu - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Year of construction: 1988, condition: good (used), A complete Atlas Copco air compressor including Donaldson Ultra Filter and a Tank in good working condition Kodpfx Aehpx U Asmrelu

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Ksdpfx Ast Hdh Nemrslu Pressure 13 bar Mileage 13200 hours The compressor is fully functional.

Condition: as good as new (ex-display), JAN REILING BV has an extensive warehouse with more than 15,000 different DEMAG craneparts, from a nut to a complete crane. In addition to new parts, we also supply used parts, hoists and cranes. Our used hoists, cranes, parts and drives are ready in our warehouse completely overhauled. JAN REILING BV immediately supplies what you are looking for. JAN REILING BV has built up an extensive supplier network within Europe. In addition to DEMAG, we can also supply you with parts from all other brands quickly and affordably. We supply various Demag parts new from stock, such as a: ropeguides Rope brakes hoistingmotors drivingmotor gearbox brake hoisting motor bottomblock loadhook runningwheels trolley pushbutton radiocontrol cabledrum types like : KBH KBF KBS KBA KBU 13/3PF 13/6PF 13/3KF 13/6KF 16/6KF 16/8KF 52D 52DF 62D 62DF 63D 63DF 72D AFW D04 D05 D06 D08 ZBA ZBF ZBR DH P100 P625 P632 P425 P408 P412 P1250 P1050 P1600 P2100 DH DMR DR DC PK DK Kledpfxeh Upyhs Amrsu contact us for the possibilities We supply both new and used

Condition: good (used), Year of construction: 2006, overall weight: 1,000 kg, volume flow: 292.2 m³/h, pressure (max.): 13 bar, Equipment: type plate available, S014584 PROD - ATLASCOPCO TYPE - GA37 PLUS Klsdpfert U Spjx Amreu S/N - API509425 YEAR - 2006 POWER (kW) - 37 OUTPUT. (m3/min) - 4.87 CIS (bar) - 13

Condition: good (used), Year of construction: 2009, MANUFACTURER: ATLASCOPCO MODEL: GA37VSDFF SERIAL NO.: API580058 YEAR: 2009 POWER (kW): 37 CAPACITY (m3/min): 7.25 PRESSURE (bar): 12.5 OPERATING HOURS (DOC/TOTAL): 100392 FREQUENCY INVERTER: yes BUILT-IN DRYER: yes, R404 1.25kg HEAT EXCHANGER: no Kedoxyarqjpfx Amrslu COOLING (AIR/WATER): air ON TANK: no DOCUMENTATION: no CONNECTION: 2'' NEW/USED: USED

Condition: good (used), Year of construction: 2003, Megamat Type: FSE 3.5 2448/816-3785 Device no.: 35.0070 Kjdpfjytgbgjx Amrjlu Year of manufacture: 2003 Unit height: approx. 3785 mm Unit width: approx. 2640 mm Unit depth: approx. 2710 mm Number of trays: 20 Tray width: approx. 2240 mm Tray depth: approx. 820 mm Tray height: approx. 55 mm Compartment load capacity: 307 kg Total load capacity: 70,000 kg Colour: white

Condition: excellent (used), Year of construction: 2006, overall weight: 1,000 kg, volume flow: 425.4 m³/h, pressure (max.): 7.5 bar, Equipment: type plate available, PROD - ATLASCOPCO TYPE - GA37 PLUS S/N - API510029 YEAR - 2006 POWER (kW) - 37 OUTPUT. (m3/min) - 7.09 CIS (bar) - 7.5 HRS (DOC/GENERAL) - 6043 WAVE - no Kljderz Rtbspfx Amrou COND. DRYER - no COOLED (POW/WATER) - air ON TANK - no NEW/USED - USED