Screw compressor

Atlas Copco GA30

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Iedpfxjx Ih D Tj Aa Ejik

Condition: excellent (used), Year of construction: 2012, Technical Data: Working length: 4100 mm Distance between uprights: 3550 mm Press force: 300 tons CNC control: DELEM EPC-3D Controlled axes: Y1/Y2; X; R; Z1/Z2 Hydraulic tool clamping top and bottom: WILA system CNC crowning Stroke: 550 mm Throat depth: 405 mm Iedpfoxdt Umsx Aa Eeik Installation height: 620 mm 2 bending aids Angle measuring system Motor power: 30 kW Laser monitoring Table height: 980 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 24.5 tons Accessories: Manual tool changer Segmented bending with step-by-step support of the bending aids (segment bending) 1 set of tools Condition: Very good condition The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: not inspected (used), Year of construction: 2014, operating hours: 43,965 h, functionality: fully functional, Second hand compressor Atlas Copco GA30VSD+FF. Integrated dryer. Integrated frequency converter. 30 kW. 13 bar. 5.85 m³/min. Iisdpfx Aasxu Ibcj Eok

Condition: excellent (used), Year of construction: 2000, ATLAS COPCO GA30FF screw compressor with air dryer, serviced Ijdpsxlpnlsfx Aa Eeik Technical data: Capacity: 3.84 m3/min Motor power: 30 kW Max pressure: 13 bar Operating hours: 13,546 h Year: 2000 Price: 14,500 net 17,835 gross Compressor is fully functional. Service support is provided. Video link below.

Condition: excellent (used), Year of construction: 2012, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, working range: 4,000 mm, Used fully serviced, clean cutting Bystronic Bystar 4020 6kw 4metre x 4metre flat bed industrial cnc laser for sale High powered Bystronic Bystar 4020 4metre x 2metre cnc laser for sale Power: 6kw / 6000 watt / Bylaser 6000 Ijdpfx Aaoqcu Avo Eoik Cutting area: 4000mm x 2000mm Year / new: 2012 Fully serviced with Bystronic and well maintained With rotary axis for cutting steel tube Cutting heads: 5inch, 7.5inch and 7.5inch long head In good working order, can be seen in production Delivery, installation and tuition can be quoted Ideal for cutting thick stainless steel, mild steel and aluminium

Condition: excellent (used), - 30kW engine - built-in dryer - Max. working pressure 7.5 bar Iijdewlcq Nepfx Aa Esk

Condition: ready for operation (used), An inspection is possible. Iodpfjn D Hbnox Aa Ejik

Year of construction: 1996, operating hours: 24,222 h, condition: good (used), This Dr. Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. - Brand: Dr Boy - Model: 80M - Year of construction: 1996 Iedpfx Aaepwh Akj Eoik - Screw diameter: 42mm - Shot volume: 200 cm³ - Clamping force: 80T - Working hours: 24,222

Condition: good (used), Year of construction: 1999, Year of manufacture 1999 7.5 bar Iiodpfx Aajwf U A Ds Esk

Condition: excellent (used), Year of construction: 2013, ATLAS COPCO GA30+ screw compressor, machine after service Technical specifications: Capacity: 4.94 m³/min; 30 kW motor; Maximum pressure: 10 bar; Year: 2013 Hours: 10,814h!!! Price: 19,500 net 23,985 gross The compressor is fully operational, ready for work, with warranty. Isdpew Nh H Aefx Aa Esik We provide service. Below is a link to a video.

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: iTNC 530, rotational speed (max.): 18,000 rpm, overall weight: 12,500 kg, General Data Measurements width 3970 mm Measurements depth 4629 mm Dqmcjh Measurements height 3050 mm Machine weight 12700 kg Main Drive Number of spindles 1 Spindle speed range 16000 rpm Spindle motor power 10 kW Tool taper SK 40 Number of axis 3 Movement X-Axis Movement 1200 mm Iedpfx Aajvambij Eeik Y-Axis Movement 900 mm Z-Axis Movement 500 mm Unfpvoddib Table Outer length 1400 mm Outer width 900 mm This 3-axis HERMLE C 1200 V vertical machining centre was manufactured in 2003. It features a robust clamping table measuring 1400 x 900 mm and a high-performance milling spindle with a maximum power of 10 kW, torque up to 87 Nm, and speeds up to 16,000 RPM. Ideal for complex machining tasks, the HERMLE C 1200 V machine we have for sale offers precision and durability. Tool magazine can be dismantled so the width can be reduced to 2500 mm. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO GA30 30Kw 2015 SPRING COMPRESSOR! Screw compressor ATLAS COPCO GA30 machine with heat exchanger after service Technical data: capacity: 5.40 m3/min; 30 KW motor,; 7.5 bar max pressure; year;2015 Iiodpstqc I Iofx Aa Ejk mileage;8114h!!! 23500 net 28905 gross Compressor fully operational,ready to work,warranty we provide service.

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO GA30 30Kw 2015 SPRING COMPRESSOR! Screw compressor ATLAS COPCO GA30 machine with heat exchanger after service Technical data: capacity: 5.40 m3/min; 30 KW motor,; 7.5 bar max pressure; year;2015 Iiedpfx Aastqc Nro Eok mileage;7589h!!! 23500 net 28905 gross Compressor fully operational,ready to work,warranty we provide service.

Condition: new, Filter cloths for all filter presses in all sizes and qualities, short delivery times, ask us Iedpfx Asg Azmmja Ejik Location is 58762 Altena

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO GA30 30Kw 2015 SPRING COMPRESSOR! Screw compressor ATLAS COPCO GA30 machine with heat exchanger after service Technical data: capacity: 5.40 m3/min; 30 KW motor,; 7.5 bar max pressure; year;2015 mileage;11330h!!! 23500 net Isdpfxstqc Eys Aa Ejik 28905 gross Compressor fully operational,ready to work,warranty we provide service.